We've been told by Intel that inconsistent cachability between
multiple mappings of the same page can affect system stability only
when the affected page is an MMIO one. Since the stale data issue is
of no relevance to the hypervisor (since all guest memory accesses go
through proper accessors and validation), handling of RAM pages
remains unchanged here. Any MMIO mapped by domains however needs to be
done consistently (all cachable mappings or all uncachable ones), in
order to avoid Machine Check exceptions. Since converting existing
cachable mappings to uncachable (at the time an uncachable mapping
gets established) would in the PV case require tracking all mappings,
allow MMIO to only get mapped uncachable (UC, UC-, or WC).
This also implies that in the PV case we mustn't use the L1 PTE update
fast path when cachability flags get altered.
Since in the HVM case at least for now we want to continue honoring
pinned cachability attributes for pages not mapped by the hypervisor,
special case handling of r/o MMIO pages (forcing UC) gets added there.
Arguably the counterpart change to p2m-pt.c may not be necessary, since
UC- (which already gets enforced there) is probably strict enough.
Note that the shadow code changes include fixing the write protection
of r/o MMIO ranges: shadow_l1e_remove_flags() and its siblings, other
than l1e_remove_flags() and alike, return the new PTE (and hence
ignoring their return values makes them no-ops).
This is CVE-2016-2270 / XSA-154.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
gnttab_max_frames incorrectly referred to numbers of grant tab
operations and gnttab_max_maptrack_frames was confusingly worded.
Add the default for gnttab_max_frames while here (it's currently the
same on all arches since no arch uses the available arch override) and
adjust the default for gnttab_max_maptrack_frames to match the normal
form.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This introduces a way to have a restricted VPMU, by specifying one of two
predefined groups of PMCs to make available. For secure environments, this
allows the VPMU to be used without needing to enable all PMCs.
Signed-off-by: Brendan Gregg <bgregg@netflix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Introduce and enforce separate limits for ordinary DomU, DomU with
pass-through device(s), control domain, and hardware domain.
The DomU defaults were determined based on what so far was allowed by
multipage_allocation_permitted().
The x86 hwdom default was chosen based on linux-2.6.18-xen.hg c/s
1102:82782f1361a9 indicating 2Mb is not enough, plus some slack.
The ARM hwdom default was chosen to allow 2Mb (order-9) mappings, plus
a little bit of slack.
This is CVE-2015-8338 / XSA-158.
Reported-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since PML series were merged (but disabled by default) we have conducted lots of
PML tests (live migration, GUI display) and PML has been working fine, therefore
turn it on by default.
Document of PML command line is adjusted accordingly as well.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Tested-by: Robert Hu <robert.hu@intel.com>
Tested-by: Xudong Hao <xudong.hao@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
First and foremost: fix documentation: The use of "clock_hz", when
"base_baud" was meant, has taken me several hours (suspecting a more
complicated problem with the PCIe card I've been trying to get
working). At once correct the "gdb" option, which is more like
"console", not like "com<N>".
Next, fix the types of ns_{read,write}_reg(): Especially the former
having had a signed return type so far caused quite interesting effects
when determining to baud rate if "auto" was specified. In that same
code, also avoid dividing by zero when in fact the baud rate was not
previously set up.
Further, accept I/O port based serial PCI cards with a port range wider
than 8 bytes.
Finally, slightly rearrange struct ns16550 to reduce holes.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I was quite surprised to find "cpufreq=off" not doing what one would
expect it to do. Fix this.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add boot parameter `psr=cdp` to enable CDP at boot time.
Intel Code/Data Prioritization (CDP) feature is based on CAT. Note that
cos_max would be half when CDP is on. struct psr_cat_cbm is extended to
support CDP operation. Extend psr_get_cat_l3_info sysctl to get CDP
status.
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Chao Peng <chao.p.peng@linux.intel.com>
Since commit 191b3f3344 ("p2m/ept: enable PML in p2m-ept for
log-dirty"), the A and D bits of EPT paging entries are set
unconditionally, regardless of whether PML is enabled or not. This
causes a regression in Xen 4.6 on some processors due to Intel Errata
AVR41 -- HVM guests get severe memory corruption when the A bit is set
due to incorrect TLB flushing on mov to cr3. The erratum affects the
Atom C2000 family (Avoton).
To fix, do not set the A bit on this processor family.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Move feature suppression to feature detection code. Add command line
override.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
When using Linux >= 3.19 (commit 47591df) as dom0 on some Intel Ironlake
devices, It is possible to encounter graphics issues that make screen
unreadable or crash the system. It was reported in freedesktop bugzilla:
https://bugs.freedesktop.org/show_bug.cgi?id=90037
As we still cannot find a proper fix for this problem, this patch adds
iommu=igfx option to control whether Intel graphics IOMMU is enabled.
Running Xen with iommu=no-igfx is similar to running Linux with
intel_iommu=igfx_off, which disables IOMMU for Intel GPU. This can be
used by users to manually workaround the problem before a fix is
available for i915 driver.
Signed-off-by: Ting-Wei Lan <lantw44@gmail.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
As implemented here, only supported on platforms with VMX HAP.
By default this functionality is force-disabled, it can be enabled
by specifying altp2m=1 on the Xen command line.
Signed-off-by: Ed White <edmund.h.white@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
In setup_mm(), the value passed as xenheap_megabytes gets
converted to pages and passed to setup_xenheap_mappings(),
which in turn passes it to create_32mb_mappings(), which
contains an ASSERT that the value passed is a multiple of
32MB. So specifying any value that is not an integer multiple
of 32 will cause Xen to hit this assert and fail to boot.
Signed-off-by: Chris Brand <chris.brand@broadcom.com>
Reviewed-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Detect Intel Cache Allocation Technology(CAT) feature and store the
cpuid information for later use. Currently only L3 cache allocation is
supported. The L3 CAT features may vary among sockets so per-socket
feature information is stored. The initialization can happen either at
boot time or when CPU(s) is hot plugged after booting.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Use -1 as notifier priority. Fix typos.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
For example on Dell machines we see:
(XEN) 00000fed18000-00000fed19fff type=11 attr=8000000000000000
(XEN) Unknown cachability for MFNs 0xfed18-0xfed19
Let's allow them to be mapped as UC.
We also alter the 'efi-rs' to be 'efi=rs' or 'efi=no-rs'.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
A top level EPT parameter "ept=<options>" and a sub boolean "opt_pml_enabled"
are added to control PML. Other booleans can be further added for any other EPT
related features.
The document description for the new parameter is also added.
Signed-off-by: Kai Huang <kai.huang@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The way this method works allows for honoring "warm" reboot requested
by the user and additionally has a way to power-cycle the machine.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
By default we will always use EFI reboot mechanism when
running under EFI platforms. However some EFI platforms
are buggy and need to use the ACPI mechanism to
reboot (such as Lenovo ThinkCentre M57). As such
respect the 'reboot=' override and DMI overrides
for EFI platforms.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
- BOOT_INVALID is just zero
- also consider acpi_disabled in BOOT_INVALID resolution
- duplicate BOOT_INVALID resolution in machine_restart()
- don't fall back from BOOT_ACPI to BOOT_EFI (if it was overridden, it
surely was for a reason)
- adjust doc change formatting
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This unifies the flask_enforcing and flask_enabled boot parameters into
a single parameter with additional states. Defined options are:
enforcing - require policy to be loaded at boot time and enforce it
permissive - a missing or broken policy does not panic
disabled - revert to dummy (no XSM) policy. Was flask_enabled=0
late - bootloader policy is not used; later loadpolicy is enforcing
The default mode remains "permissive" and the flask_enforcing boot
parameter is retained for compatibility. If flask_enforcing=1 is
specified and flask= is not, the bootloader policy will be loaded in
enforcing mode if present, but errors will disable access controls until
a successful loadpolicy instead of causing a panic at boot.
Suggested-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
... by introducing a "dom0_nodes" option augmenting the "dom0_mem" and
"dom0_max_vcpus" ones.
Note that this gives meaning to MEMF_exact_node specified alone (i.e.
implicitly combined with NUMA_NO_NODE): In such a case any node inside
the domain's node mask is acceptable, but no other node. This changed
behavior is (implicitly) being exposed through the memop hypercalls.
Note further that this change doesn't take care of moving the initrd
image into memory matching Dom0's affinity when the initrd doesn't get
copied (because of being part of the initial mapping) anyway.
And note finally that this doesn't get us meaningfully closer to
handing vNUMA information to Dom0 (which will require the current
striping of allocations to become node-specific in order for the passed
on information to be meaningful).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@cirix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add Memory Bandwidth Monitoring(MBM) for VMs. Two types of monitoring
are supported: total and local memory bandwidth monitoring. To use it,
CMT should be enabled in hypervisor.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
... and make it tunable via the command line.
1/8 of RAM is 128M on a 1GB system and 256M on a 2GB system etc,
which is a lot. 1/32 of RAM seems more reasonable. Also drop the
minimum to 32M.
Leave the maximum at 1GB.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Cc: Jintack Lim <jintack@cs.columbia.edu>
Cc: Jan Beulich <JBeulich@suse.com>
NMI watchdog sets APIC_LVTPC register to generate an NMI when PMU counter
overflow occurs. This may be overwritten by VPMU code later, effectively
turning off the watchdog.
We should disable VPMU when NMI watchdog is running.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Prevent Dom0 from accessing HPET MMIO region by adding the HPET mfn to the
list of forbiden memory regions (if ACPI_HPET_PAGE_PROTECT4 or
ACPI_HPET_PAGE_PROTECT64 flag is set) or to the list of read-only regions.
Also provide an option that prevents adding the HPET to the read-only memory
regions called ro-hpet, in case there are systems that put other stuff in
the HPET page.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Don't loop over iomem_deny_access() for consecutive MFNs.
Put new command line option's doc entry in right spot.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
',' is a valid character in a device-tree path (see ePAPR v1.1 Table
2-1), in fact ',' is actually pretty common in node names.
Using ',' as a separator breaks for example on fast models. If you use
the full path (/smb/motherboard/iofpga@3,00000000/uart@090000) rather
than the alias then earlyprintk gives:
(XEN) Looking for UART console /smb/motherboard/iofpga@3
(XEN) Unable to find device "/smb/motherboard/iofpga@3"
(XEN) Bad console= option 'dtuart'
I actually noticed this on Jetson where the uart is
"/serial@0,70006300" and there happened to be no alias defined.
Instead use ':' as the separator, it is defined to terminate the path
in the context of /chosen/stdout-path (Table 3-4) which is pretty
closely analogous to the dtuart= option and so makes a pretty good
choice (especially since the next patch adds support for stdout-path).
Since no DT aware driver current supports any options there is no
point in retaining support for ',' for backwards compatibility.
Additionally, expand the buffer for the dtuart option, a path can be
far longer than 30 characters (in fact the maximum size of a single
node name is 31, so it's not even necessarily enough for an alias).
128 is completely arbitrary and allows for paths at least 8 deep even
with worst case node names.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
We've had reports of systems where CMCIs would surface at a relatively
high rate during certain periods of time, without them apparently
causing subsequent more severe problems (see Xeon E7-8800/4800/2800
specification clarification SC1). Give the admin a knob to lower the
impact on the system logs.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christoph Egger <chegger@amazon.de>
Acked-by: Liu Jinsong <jinsong.liu@alibaba-inc.com>
`font` had a trailing single quote which was out of place.
`gnttab_max_frames` was missing escapes for the underscores which caused the
underscores to take their markdown meaning, causing 'max' in the middle to be
italicised. Escape the underscores, and make all command line parameters
bold, to be consistent with the existing style.
Clarify how the default for `nmi` changes between debug and non debug builds
of Xen.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The current value of nr_static_irqs + 256 is often too small for larger
systems. Make it dependent on CPU count and number of IO-APIC pins on
x86, and (until it obtains PCI support) simply NR_IRQS on ARM.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Currently the quirk code for SandyBridge uses the VTd timeout value when
writing to an IGD register. This is the wrong timeout to use and, at
1000 msec., is also much too large. This patch changes the quirk code
to use a timeout that is specific to the IGD device and allows the user
control of the timeout.
Boolean settings for the boot parameter `snb_igd_quirk' keep their current
meaning, enabling or disabling the quirk code with a timeout of 1000 msec.
In addition specifying `snb_igd_quirk=default' will enable the code and
set the timeout to the theoretical maximum of 670 msec. For finer control,
specifying `snb_igd_quirk=n', where `n' is a decimal number, will enable
the code and set the timeout to `n' msec.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Update documentation.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
* Add options whose code has been committed (without a patch to this file).
* Remove options which have been deleted (without a patch to this file).
* Tweak some formatting for consistency.
* Nuke some trailing whitespace.
I believe this document now identifies the exact set of command line options
accepted by Xen, for both x86 and ARM architectures.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
For 'dom0_max_vcpus' and 'hvm_debug', markdown was interpreting the text as
regular text, and reflowing it as a regular paragraph, leading to a single
line as output. Reformat them as code blocks inside blockquote blocks, which
causes them to take their precise whitespace layout.
For 'psr', the bullet point was incorrectly delineated from paragraph text,
causing it to be reflowed. Alter the formatting to include the CMT-specific
options as sub-bullets of the overall CMT resource.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Release-acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Some versions of markdown (specifically the one in Debian Wheezy, currently
used to generate
http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html) seem to be
confused by nested lists in the middle of multi-paragraph parent list entries
as seen in the com1,com2 entry.
The effect is that the "Default" section of all following entries are replace
by some sort of hash or checksum (at least, a string of 32 random seeming hex
digits).
Workaround this issue by making the decriptions of the DPS options a nested
list, moving the existing nested list describing the options for S into a third
level list. This seems to avoid the issue, and is arguably better formatting in
its own right (at least its not a regression IMHO)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
On certain systems some of the memory map entries designated for use by
runtime services cannot be mapped (frequently due to firmware bugs). On
others, some of the memory map entries aren't even marked for runtime
services use, yet are being used by them. For both cases give people a
way to suppress use of runtime services altogether.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce gnttab_max_maptrack_frames: a new Xen command line option to
specify the max number of maptrack frames per domain.
Deprecate the old gnttab_max_nr_frames and introduce gnttab_max_frames
instead, that doesn't affect the maptrack. Keep gnttab_max_nr_frames for
compatibility.
Rename internally max_nr_grant_frames to max_grant_frames to avoid
confusions.
Introduce DEFAULT_MAX_MAPTRACK_FRAMES, that is completely independent
from max_nr_grant_frames.
Remove MAX_MAPTRACK_TO_GRANTS_RATIO that is now only used in one place
for compatibility.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Detect Cache Monitoring Technology(CMT) feature and enumerate the
resource types, one of which is to monitor the L3 cache occupancy.
Also introduce a Xen command line parameter to control the Platform
Shared Resource such as CMT.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Analysis of XSAs 105 and 106 show that is possible to force a race condition
which causes any arbitrary instruction to be emulated.
To aid testing, explicitly introduce the Forced Emulation Prefix for debug
builds alone.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Change NMI processing so that if watchdog=force is passed on the
command-line and the NMI is not caused by a perf counter overflow (i.e.
likely not a watchdog "tick"), the NMI is handled by the unknown NMI
handler.
This allows injection of NMIs from IPMI controllers that don't set the
IOCK/SERR bits to trigger the unknown NMI handler rather than be
ignored.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fix command line parsing (don't enable the watchdog on e.g.
"watchdog=xyz").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Xen cannot safely use any ATS functionality until it gains asynchronous queued
invalidation support, because of the current synchronous wait for completion.
Do not turn ATS on by default.
While editing the default in the command line documentation, correct the
statement regarding PCI Passthrough. ATS is purely a performance
optimisation, and is certainly not required for PCI Passthrough to function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Adding actual descriptions for them, hiding the hvm_debug= one from
non-debug builds (the option was recognized but didn't take any effect
so far), and adjusting some debug level specifiers to their purpose.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
HP is setting the ACPI_FADT_NO_CMOS_RTC flag on newer systems,
regardless of whether they're being booted from UEFI. Add a command
line option to allow probing for a working RTC in that case.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The page scrubbing is done in 128MB chunks in lockstep across all the
non-SMT CPU's. This allows for the boot CPU to hold the heap_lock whilst each
chunk is being scrubbed and then release the heap_lock when the CPU's are
finished scrubing their individual chunk. This allows for the heap_lock to
not be held continously and for pending softirqs are to be serviced
periodically across the CPU's.
The page scrub memory chunks are allocated to the CPU's in a NUMA aware
fashion to reduce socket interconnect overhead and improve performance.
Specifically in the first phase we scrub at the same time on all the
NUMA nodes that have CPUs - we also weed out the SMT threads so that
we only use cores (that gives a 50% boost). The second phase is for NUMA
nodes that have no CPUs - for that we use the closest NUMA node's CPUs
(non-SMT again) to do the job.
This patch reduces the boot page scrub time on a 128GB 64 core AMD Opteron
6386 machine from 49 seconds to 3 seconds.
On a IvyBridge-EX 8 socket box with 1.5TB it cuts it down from 15 minutes
to 63 seconds.
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
cpufreq parameter can take more options than currently
documented. Include these with some comments regarding
their intention.
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Finally last patch in the series to enable creation of pvh dom0.
A pvh dom0 is created by adding dom0pvh to grub xen command line.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Jan Beulich
Ian Campbell
Brendan Gregg
Huaitong Han
Kai Huang
He Chen
Ross Lagerwall
Ting-Wei Lan
Ed White
Chris (Christopher) Brand
Dario Faggioli
Chao Peng
Konrad Rzeszutek Wilk
Daniel De Graaf
Boris Ostrovsky
Andrew Cooper
Roger Pau Monné
Don Dugger
Stefano Stabellini
Dongxiao Xu
Malcolm Crossley
Aravind Gopalakrishnan
Mukesh Rathor