libxenforeignmemory will provide a stable API and ABI for mapping
foreign domain memory (subject to appropriate privileges).
The new library exposes an interface equivalent to
xc_map_foreign_memory_bulk, which all the other
xc_map_foreign_memory_* functions (which remain in libxc) are
implemented in terms of.
Upon request (via #define XC_WANT_COMPAT_MAP_FOREIGN_API) libxenctrl
will provide a compat API for the old names. This is used by qemu-xen
and qemu-trad as well as various in tree things (which required
de-dupping various #includes in some too to get the #define before the
first).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ ijc -- updated MINIOS_UPSTREAM_REVISION and QEMU_TRADITIONAL_REVISION ]
The alternative backend (a xen-api/xapi shim) is no longer around and
so this stuff is now just baggage which is getting in the way of
refactoring libxenctrl.
Nested virt probably suffices for this use case now.
This was the last component of the osdep infrastructure, so all the
dynamic loading etc stuff all falls away too.
As part of this I was forced to investigate the twisty
xc_map_foreign_* maze, which I have added to the
toolstack-library-apis doc in the hopes of doing something sensible.
NetBSD and Solaris now call xc_map_foreign_bulk_compat directly from
their xc_map_foreign_bulk, which could have been achieved by using
some ifdefs around a renamed function. This will fall out in the wash
when these functions move to their own library.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With the addition of HVMlite the hypervisor now always requires a non-null
arch domain config, which is different between HVM and PV guests.
Add a new parameter to xc_domain_create that contains a pointer to an arch
domain config. If the pointer is null, create a default arch domain config
based on guest type.
Fix all the in-tree callers to provide a null arch domain config in order to
mimic previous behaviour.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
According to public/sched.h, there is a new shutdown_reason called
soft_reset. Propagate that value to ocaml.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave@recoil.org>
As defined by the Xen public header the fifth value of
shutdown_reason is watchdog.
Signed-off-by: Simon Rowe <simon.rowe@eu.citrix.com>
Acked-by: David Scott <dave@recoil.org>
The Ocaml stub to retrieve the hypervisor console ring had a few problems.
* A single 32k buffer would truncate a large console ring.
* The buffer was static and not under the protection of the Ocaml GC lock so
could be clobbered by concurrent accesses.
* Embedded NUL characters would cause caml_copy_string() (which is strlen()
based) to truncate the buffer.
The function is rewritten from scratch, using the same algorithm as the python
stubs, but uses the protection of the Ocaml GC lock to maintain a static
running total of the ring size, to avoid redundant realloc()ing in future
calls.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Dave Scott <dave.scott@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
by using the flag and the new cpumap arguments introduced in
the parameters of the DOMCTL_{get,set}_vcpuaffinity hypercalls.
Now, both xc_vcpu_setaffinity() and xc_vcpu_getaffinity() have
a new flag parameter, to specify whether the user wants to
set/get hard affinity, soft affinity or both. They also have
two cpumap parameters instead of only one. This way, it is
possible to set/get both hard and soft affinity at the same
time (and, in case of set, each one to its own value).
In xc_vcpu_setaffinity(), the cpumaps are IN/OUT parameters,
as it is for the corresponding arguments of the
DOMCTL_set_vcpuaffinity hypercall. What Xen puts there is the
hard and soft effective affinity, that is what Xen will actually
use for scheduling.
In-tree callers are also fixed to cope with the new interface.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The various cpuid functions are not available on ARM, so this
makes them raise an OCaml exception. Omitting the functions
completely results in a link failure in oxenstored due to the
missing symbols, so this is preferable to the much bigger patch
that would result from adding conditional compilation into the
OCaml interfaces.
With this patch, oxenstored can successfully start a domain on
Xen/ARM.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Acked-by: David Scott <dave.scott@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Not sure how it got there...
Coverity-ID: 1056196
This is CVE-2013-4370 / XSA-69
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
configure checks just for ocamlc, but the tools in tools/ocaml depend
also on ocamlfind. On my workstation I have just ocamlc installed, but
no ocamlfind. As a result make will fail.
Update configure.ac to check also for OCAMLFIND, update various
Makefiles and replace hardcoded ocamlfind string with $(OCAMLFIND)
Please rerun autogen.sh after applying this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Changeset 23861:ec7c81fbe0de alters the SBDF encoding expected by the
DOMCTL_{de,}assign_device hypercalls.
While it updates libxl, libxc and the python bindings, the ocaml
bindings got missed. As a result, any attempt to use PCI Passthrough
with Xen-4.2 and later will fail.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Since libxc is re-entrant, there is no need for the OCaml bindings to
prevent more than one thread from entering libxc concurrently.
Previously, the OCaml bindings had prevented re-entrancy by not using
caml_{enter,leave}_blocking_section in the C stubs. The absence of
these calls meant that the global lock remained held during
hypercalls. This caused multi-threaded applications to completely lock
up during long-running hypercalls.
Calls to these functions were present but commented out in the OCaml
bindings some years ago when libxc was not fully re-entrant.
Instead, we now do call caml_{enter,leave}_blocking_section in all the
places it used to be commented out, meaning that the global lock is
released during those hypercalls. We also no longer assert the
XC_OPENFLAG_NON_REENTRANT flag when calling xc_interface_open because
the caller no longer does re-entrancy prevention at those places.
This patch has now gone through a XenRT nightly test; no problems were
observed.
Signed-off-by: Jonathan Davies <jonathan.davies@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a new field 'max_nr_cpus' to the physinfo type in the ocaml xc bindings
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The bit bugs are in ocaml vcpu affinity calls, and the off-by-one
error is in the ocaml console ring code
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
The library was only minimally used, and was really rather redundant.
Signed-off-by: Zheng Li <zheng.li@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
ocamlfind does not support namespaces, so to avoid
name clashes the module names have become longer.
Additionally, the xenstore and xenbus subdirs, which
contain several modules each, have been packed into
toplevel Xenstore and Xenbus modules.
xb becomes xenbus, xc becomes xenctrl, xl becomes xenlight,
xs becomes xenstore, eventchn becomes xeneventchn and
mmap becomes xenmmap.
[ Patch modified from that submitted, to update the .hgignore, and to
cope with intervening changes to mmap_stubs.c -iwj ]
Signed-off-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
It's not needed unless you are including headers in the current
directory _and_ you can't use "" instead of <> because the headers are
to be installed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise make can search the path relative to certain standard paths
such as /usr/include (e.g., the line '-include $(XEN_ROOT)/.config' in
Config.mk suffers from this).
Signed-off-by: Keir Fraser <keir@xen.org>
Now that tools/libxc is licensed under LGPL I don't think there is any need for
an LGPL reimplementation under tools/ocaml.
For the most part the conversion to the up-to-date libxc API (xc_lib.c
essentially implemented the same interface as an older libxc) was pretty
automatic. There are some functions which appear to no longer exist in libxc
which I therefore simply removed the bindings for and a small number of
interfaces which had changed.
Many of the functions bound by the stubs have no in-tree users (which I think
is fine for a language binding) so I have no way to confirm correctness other
than by eye. I was however able to confirm that oxenstored still worked and to
build a XCP toolstack which could successfully start a PV guest.
Uses the new XC_OPENFLAG_NON_REENTRANT option to avoid potential conflicts
between pthreads and the ocaml runtime.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Vincent Hanquez <Vincent.Hanquez@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Previously the install target was having no effect because it ended up
calling the default target in the subdir Makefile instead of the
install target.
Resolve this by tying the tools/ocaml Makefiles into the generic
handling done by tools/Rules.mk.
Other changes arising in one way or another from this:
- Add libs/xl/META.in
- Update .hgignore for META files
- Create leading directories
- Remove existing module before installation in install targer
(worksaround what appears to be a quirk of "ocamlfind install")
- Use the globally defined $(DESTDIR)
- Move "ocamlfind printfconf destdir" to a common variable,
repurposing exising unused OCAMLDESTDIR, incorporating $(DESTDIR) at
the same time.
- Drop a few unused variabe definitions (mainly to avoid deciding if
$(DESTDIR) made sense for them or not.
- Pass -destdir to ocamlfind in uninstall target for symmetry with
install target.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
cc1: warnings being treated as errors
xc_lib.c: In function 'xc_domain_get_pfn_list':
xc_lib.c:1217: error: assignment from incompatible pointer type
The XEN_DOMCTL_getmemlist interface has been 32/64 invariante since
13594:30af6cfdb05c and uint64_t is now the correct type for the PFN
list on all word sizes.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Ian Campbell
Roger Pau Monne
Wei Liu
Simon Rowe
Tiejun Chen
Andrew Cooper
Olaf Hering
Dario Faggioli
Anil Madhavapeddy
Matthew Daley
Jonathan Davies
Jon Ludlam
Keir Fraser
Wei Gang
Keir Fraser