ocamlfind does not support namespaces, so to avoid
name clashes the module names have become longer.
Additionally, the xenstore and xenbus subdirs, which
contain several modules each, have been packed into
toplevel Xenstore and Xenbus modules.
xb becomes xenbus, xc becomes xenctrl, xl becomes xenlight,
xs becomes xenstore, eventchn becomes xeneventchn and
mmap becomes xenmmap.
[ Patch modified from that submitted, to update the .hgignore, and to
cope with intervening changes to mmap_stubs.c -iwj ]
Signed-off-by: Jon Ludlam <jonathan.ludlam@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
AMD_ERRATUM_400 was used to determine whether the processor supports
Always Running APIC Counter (ARAT) feature in init_amd(). Now that
ARAT support is based solely on family number this macro is no longer
needed.
Keep it in comments section as an example in case we ever need to use
it for somethnig else.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
This deals with two limitations at once: On device removal, the
mapping did not get updated so far at all, and hotplugged devices as
well as such not discoverable by Xen's initial bus scan (including the
case where a non-zero PCI segment wasn't accessible during Xen boot,
but became accessible after Dom0 validated access information against
ACPI data) wouldn't cause updates to the mapping either.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: "Kay, Allen M" <allen.m.kay@intel.com>
If a non-zero PCI segment isn't accessible during Xen boot (because
firmware decided to not enter the necessary MMIO space into the E820
table), devices referred to on those segments through DRHD or RMRR
structures should not be rejected just because the devices can't be
found.
This is in line with what is being done in at least one other case
already: Systems with more than one PCI segment (usually high end
ones) are assumed to have valid firmware provided data, while systems
with just segment 0 continue to have their firmware tables validated.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: "Kay, Allen M" <allen.m.kay@intel.com>
Remove tools/check/check_logging. Python 2.3 is the minimal required
python version so the checked function is available anyway.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
XEN_ROOT must be set to an absolute path to avoid out of the tree
references
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
Committed-by: Keir Fraser <keir@xen.org>
Determining whether an AMD processor is affected by erratum 400 may
have some corner cases and handling these cases is somewhat complicated.
In the interest of simplicity we won't claim ARAT support on processor
families below 0x12.
Mirrors Linux commit e9cdd343a5e42c43bcda01e609fa23089e026470
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
This library implements a bidirectional communication interface between
applications in different domains, similar to unix sockets. Data can be
sent using the byte-oriented libvchan_read/libvchan_write or the
packet-oriented libvchan_recv/libvchan_send.
Channel setup is done using a client-server model; domain IDs and a port
number must be negotiated prior to initialization. The server allocates
memory for the shared pages and determines the sizes of the
communication rings (which may span multiple pages, although the default
places rings and control within a single page).
With properly sized rings, testing has shown that this interface
provides speed comparable to pipes within a single Linux domain; it is
significantly faster than network-based communication.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
These functions and the xc_gntshr device (/dev/xen/gntalloc on linux)
allow applications to create pages shared with other domains.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Normally, when a userspace process mapping a grant crashes, the domain
providing the reference receives no indication that its peer has
crashed, possibly leading to unexpected freezes or timeouts. This
function provides a notification of the unmap by signalling an event
channel and/or clearing a specific byte in the page.
This also unifies the 3 very similar grant-mapping osdep interfaces into
a single function instead of introducing yet another minor variation.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
I think I broke this back in 22041:4c9ef5ec9146, using i as both the inner and
outer loop iterator.
I've added libxl__compare_macs which helps keep things clean.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change GET_C_STRUCT to Intf_val to follow the common naming scheme of
OCaml macros, and for better readability.
Signed-off-by: Zheng Li <dev@zheng.li>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Fix invalid memory access in OCaml mmap library (to play nicely with the GC)
This was a bug reported by Roberto Di Cosmo. When he tried to reuse
the mmap library for his own project, Mmap.read occasionally got
different result when reading from the same map. This turned out to be
a bug in the binding, where a C pointer was created pointing to a
OCaml value, and the OCaml value was subsequently moved around by the
GC after memory allocation and hence invalidated the C pointer. This
patch removes the indirection of C pointer and uses OCaml macro to
access values directly.
Only Mmap.read function had this problem. The other functions, despite
having the same code style, didn't have memory allocation involved
hence wouldn't intrigue such an error. I've changed all of them to the
safer style for future proof. Directly casting OCaml value's *data
block* (rather than the value itself) as a C pointer is not a common
practice either, but I'll leave it as it is.
The bug hadn't occured on XenServer because XenServer didn't make use
of the Mmap.read function (except in one place for debugging). In
XenServer, most mmap operations were going through another pair of
separately implemented functions (Xs_ring.read/write).
Signed-off-by: Zheng Li <dev@zheng.li>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Without this in the "xl help" line for pci-list-assignable-devices the command
name merges with the first word of the help. Since the bash completion support
parses "xl help" this leads to "pci-list-assignable-devicesList" being
presented as an option instead of the correct command name.
We also need to filter out lines which start with more than one space in the
bash completion support to stop "List" appearing as a possible command name
after the change to wrap it.
Doesn't address the fact that some help text overflows 80 columns.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently it tries to parse the value from the full "backendtype=FOO" string
but really it needs to parse from the equals.
Before:
# xl -N block-attach d32-1 backendtype=phy,vdev=xvdb,access=w,target=/dev/VG/debian-x86_32-1b
command line: config parsing error in disk specification: unknown value for backendtype: near `backendtype=phy' in `backendtype=phy,vdev=xvdb,access=w,target=/dev/VG/debian-x86_32-1b'
After [in new syntax, not yet in this tree -iwj]:
# xl -N block-attach d32-1 backendtype=phy,vdev=xvdb,access=w,target=/dev/VG/debian-x86_32-1b
disk: {
"backend_domid": 0,
"pdev_path": "/dev/VG/debian-x86_32-1b",
"vdev": "xvdb",
"backend": "phy",
"format": "raw",
"script": null,
"removable": 0,
"readwrite": 1,
"is_cdrom": 0
}
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Query and update the p2mt in set_mmio_p2m_entry, clear_mmio_p2m_entry
and set_shared_p2m_entry with the p2m_lock held.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
clear_mmio_p2m_entry() should mark the gfn as invalid.
Use proper name instead of numerical value. The currently used value of
zero means p2m_ram_rw.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Currently there is no way to avoid the double check of the p2mt
because p2m_mem_paging_populate() is called from many places without
the p2m_lock held. Upcoming changes will move the function into
gfn_to_mfn(), so its interface could be changed and the extra
p2m_lock/get_entry can be removed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Use p2m->get_entry() in the p2m_mem_paging functions. This preserves the
p2m_access type when gfn is updated with set_p2m_entry().
Its also a preparation for locking fixes in a subsequent patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
This includes the removal of a redundant memset() from microcode_amd.c.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Rather than having to match a call to one of the xmalloc() flavors with
a subsequent memset(), introduce a zeroing variant of each of those
flavors.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Currently the build produces lots of
Usage: grep [OPTION]... PATTERN [FILE]...
Try `grep --help' for more information.
This is due to the "grep -- $(2)" in cc-options. It seems that the
default of reading stdin is disabled when using "--". I don't know if
this is a bug in grep or how it is supposed to be but we can work
around it by explicitly passing in "-"
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Fix and clean up the logic to __clear_irq_vector().
We always need to clear the things related to cfg->vector.
If the IRQ is currently in motion, then we need to also clear
out things related to cfg->old_vector.
This patch reorganizes the function to make the parallels between
the two clean-ups more obvious.
The main functional change here is with cfg->used_vectors; make
sure to clear cfg->vector always (even if !cfg->move_in_progress);
if cfg->move_in_progress, clear cfg->old_vector as well.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The name "nr_ioapic_registers" is wrong and actively misleading. The
variable holds the number of redirection entries for each apic, which
is two registers fewer than the total number of registers.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
QMP stands for QEMU Monitor Protocol and it is used to query information
from QEMU or to control QEMU.
This implementation will ask QEMU the list of chardevice and store the
path to serial ports in xenstored. So we will be able to use xl console
with QEMU upstream.
In order to connect to the QMP server, a socket file is created in
/var/run/xen/qmp-libxl-$(domid).
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
We use the yajl parser, but we need to make a tree from the parse result
to use it outside the parser.
So this patch include json_object struct that is used to hold the JSON
data.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
--HG--
rename : tools/libxl/libxl.idl => tools/libxl/libxl_types.idl
Jon Ludlam
Daniel De Graaf
Boris Ostrovsky
Jan Beulich
Olaf Hering
Ian Jackson
Ian Campbell
Juergen Gross
Roger Pau Monne
Zheng Li
Keir Fraser
Anthony PERARD