Add the memory accounting for Xenstore nodes. In order to make this
not too complicated allow for some sloppiness when writing nodes. Any
hard quota violation will result in no further requests to be accepted.
This is part of XSA-326 / CVE-2022-42315.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 00e9e32d02)
Add the memory accounting for registered watches.
When a socket connection is destroyed, the associated watches are
removed, too. In order to keep memory accounting correct the watches
must be removed explicitly via a call of conn_delete_all_watches() from
destroy_conn().
This is part of XSA-326 / CVE-2022-42315.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 7f9978a2cc)
Add the memory accounting for queued responses.
In case adding a watch event for a guest is causing the hard memory
quota of that guest to be violated, the event is dropped. This will
ensure that it is impossible to drive another guest past its memory
quota by generating insane amounts of events for that guest. This is
especially important for protecting driver domains from that attack
vector.
This is part of XSA-326 / CVE-2022-42315.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit f6d0013364)
The amount of memory a domain can consume in Xenstore is limited by
various quota today, but even with sane quota a domain can still
consume rather large memory quantities.
Add the infrastructure for keeping track of the amount of memory a
domain is consuming in Xenstore. Note that this is only the memory a
domain has direct control over, so any internal administration data
needed by Xenstore only is not being accounted for.
There are two quotas defined: a soft quota which will result in a
warning issued via syslog() when it is exceeded, and a hard quota
resulting in a stop of accepting further requests or watch events as
long as the hard quota would be violated by accepting those.
Setting any of those quotas to 0 will disable it.
As default values use 2MB per domain for the soft limit (this basically
covers the allowed case to create 1000 nodes needing 2kB each), and
2.5MB for the hard limit.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 0d4a8ec7a9)
Setting up the basic structure when introducing dom0 has the advantage
to be able to add proper node memory accounting for the added nodes
later.
This makes it possible to do proper node accounting, too.
An additional requirement to make that work fine is to correct the
owner of the created nodes to be dom0_domid instead of domid 0.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 60e2f6020d)
Today a guest is free to access as many nodes in a single transaction
as it wants. This can lead to unbounded memory consumption in Xenstore
as there is the need to keep track of all nodes having been accessed
during a transaction.
In oxenstored the number of requests in a transaction is being limited
via a quota maxrequests (default is 1024). As multiple accesses of a
node are not problematic in C Xenstore, limit the number of accessed
nodes.
In order to let read_node() detect a quota error in case too many nodes
are being accessed, check the return value of access_node() and return
NULL in case an error has been seen. Introduce __must_check and add it
to the access_node() prototype.
This is part of XSA-326 / CVE-2022-42314.
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 268369d8e3)
The accounting of nodes can be simplified now that each connection
holds the associated domid.
Fix the node accounting to cover nodes created for a domain before it
has been introduced. This requires to react properly to an allocation
failure inside domain_entry_inc() by returning an error code.
Especially in error paths the node accounting has to be fixed in some
cases.
This is part of XSA-326 / CVE-2022-42313.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit dbef1f7482)
Don't use conn->id for privilege checks, but domain_is_unprivileged().
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 3047df38e1)
A guest not reading its Xenstore response buffer fast enough might
pile up lots of Xenstore watch events buffered. Reduce the generated
load by dropping new events which already have an identical copy
pending.
The special events "@..." are excluded from that handling as there are
known use cases where the handler is relying on each event to be sent
individually.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit b5c0bdb96d)
Add another quota for limiting the number of outstanding requests of a
guest. As the way to specify quotas on the command line is becoming
rather nasty, switch to a new scheme using [--quota|-Q] <what>=<val>
allowing to add more quotas in future easily.
Set the default value to 20 (basically a random value not seeming to
be too high or too low).
A request is said to be outstanding if any message generated by this
request (the direct response plus potential watch events) is not yet
completely stored into a ring buffer. The initial watch event sent as
a result of registering a watch is an exception.
Note that across a live update the relation to buffered watch events
for other domains is lost.
Use talloc_zero() for allocating the domain structure in order to have
all per-domain quota zeroed initially.
This is part of XSA-326 / CVE-2022-42312.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 36de433a27)
A future modification will limit the number of outstanding requests
for a domain, where "outstanding" means that the response of the
request or any resulting watch event hasn't been consumed yet.
In order to avoid a malicious guest being capable to block other guests
by not reading watch events, add a timeout for watch events. In case a
watch event hasn't been consumed after this timeout, it is being
deleted. Set the default timeout to 20 seconds (a random value being
not too high).
In order to support to specify other timeout values in future, use a
generic command line option for that purpose:
--timeout|-w watch-event=<seconds>
This is part of XSA-326 / CVE-2022-42311.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 5285dcb1a5)
When removing a watched node outside of a transaction, two watch events
are being produced instead of just a single one.
When finalizing a transaction watch events can be generated for each
node which is being modified, even if outside a transaction such
modifications might not have resulted in a watch event.
This happens e.g.:
- for nodes which are only modified due to added/removed child entries
- for nodes being removed or created implicitly (e.g. creation of a/b/c
is implicitly creating a/b, resulting in watch events for a, a/b and
a/b/c instead of a/b/c only)
Avoid these additional watch events, in order to reduce the needed
memory inside Xenstore for queueing them.
This is being achieved by adding event flags to struct accessed_node
specifying whether an event should be triggered, and whether it should
be an exact match of the modified path. Both flags can be set from
fire_watches() instead of implying them only.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 3a96013a3e)
Add two helpers for freeing struct buffered_data: free_buffered_data()
for freeing one instance and conn_free_buffered_data() for freeing all
instances for a connection.
This is avoiding duplicated code and will help later when more actions
are needed when freeing a struct buffered_data.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit ead062a68a)
Today send_reply() is used for both, normal request replies and watch
events.
Split it up into send_reply() and send_event(). This will be used to
add some event specific handling.
add_event() can be merged into send_event(), removing the need for an
intermediate memory allocation.
This is part of XSA-326.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 9bfde319db)
Commit f2bebf72c4 "xenstore: rework of transaction handling" moved
out from copying the entire database everytime a new transaction is
opened to track the list of nodes changed.
The content of all the nodes accessed during a transaction will be
temporarily stored in TDB using a different key.
The function create_node() may write/update multiple nodes if the child
doesn't exist. In case of a failure, the function will revert any
changes (this include any update to TDB). Unfortunately, the function
which reverts the changes (i.e. destroy_node()) will not use the correct
key to delete any update or even request the transaction to fail.
This means that if a client decide to go ahead with committing the
transaction, orphan nodes will be created because they were not linked
to an existing node (create_node() will write the nodes backwards).
Once some nodes have been partially updated in a transaction, it is not
easily possible to undo any changes. So rather than continuing and hit
weird issue while committing, it is much saner to fail the transaction.
This will have an impact on any client that decides to commit even if it
can't write a node. Although, it is not clear why a normal client would
want to do that...
Lastly, update destroy_node() to use the correct key for deleting the
node. Rather than recreating it (this will allocate memory and
therefore fail), stash the key in the structure node.
This is XSA-415 / CVE-2022-42310.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit 5d71766bd1)
XSA-115 extended destroy_node() to update the node accounting for the
connection. The implementation is assuming the connection is the parent
of the node, however all the nodes are allocated using a separate context
(see process_message()). This will result to crash (or corrupt) xenstored
as the pointer is wrongly used.
In case of an error, any changes to the database or update to the
accounting will now be reverted in create_node() by calling directly
destroy_node(). This has the nice advantage to remove the loop to unset
the destructors in case of success.
Take the opportunity to free the nodes right now as they are not
going to be reachable (the function returns NULL) and are just wasting
resources.
This is XSA-414 / CVE-2022-42309.
Fixes: 0bfb2101f2 ("tools/xenstore: fix node accounting after failed node creation")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit 1cd3cc7ea2)
Hardware using GICv2 needs to create a P2M mapping of 8KB GICv2 area
when the domain is created. Considering the worst case of page tables
which requires 6 P2M pages as the two pages will be consecutive but not
necessarily in the same L3 page table and keep a buffer, populate 16
pages as the default value to the P2M pages pool in p2m_init() at the
domain creation stage to satisfy the GICv2 requirement. For GICv3, the
above-mentioned P2M mapping is not necessary, but since the allocated
16 pages here would not be lost, hence populate these pages
unconditionally.
With the default 16 P2M pages populated, there would be a case that
failures would happen in the domain creation with P2M pages already in
use. To properly free the P2M for this case, firstly support the
optionally preemption of p2m_teardown(), then call p2m_teardown() and
p2m_set_allocation(d, 0, NULL) non-preemptively in p2m_final_teardown().
As non-preemptive p2m_teardown() should only return 0, use a
BUG_ON to confirm that.
Since p2m_final_teardown() is called either after
domain_relinquish_resources() where relinquish_p2m_mapping() has been
called, or from failure path of domain_create()/arch_domain_create()
where mappings that require p2m_put_l3_page() should never be created,
relinquish_p2m_mapping() is not added in p2m_final_teardown(), add
in-code comments to refer this.
Fixes: cbea5a1149 ("xen/arm: Allocate and free P2M pages from the P2M pool")
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
(cherry picked from commit: c7cff11888)
p2m_init() is mostly trivial initialisation, but has two fallible operations
which are on either side of the backpointer trigger for teardown to take
actions.
p2m_free_vmid() is idempotent with a failed p2m_alloc_vmid(), so rearrange
p2m_init() to perform all trivial setup, then set the backpointer, then
perform all fallible setup.
This will simplify a future bugfix which needs to add a third fallible
operation.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
(cherry picked from commit: 3783e58331)
The backport didn't adapt to the earlier function prototype taking more
(unused here) arguments.
Fixes: c521504457 ("xen/arm, libxl: Implement XEN_DOMCTL_shadow_op for Arm")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Henry Wang <Henry.Wang@arm.com>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
While the comment next to the lock dropping in preparation of
recursively calling acquire_grant_for_copy() mistakenly talks about the
rd == td case (excluded a few lines further up), the same concerns apply
to the calling of release_grant_for_copy() on a subsequent error path.
This is CVE-2022-33748 / XSA-411.
Fixes: ad48fb963d ("gnttab: fix transitive grant handling")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 6e3aab858e
master date: 2022-10-11 14:29:30 +0200
This commit sets/tearsdown of p2m pages pool for non-privileged Arm
guests by calling `p2m_set_allocation` and `p2m_teardown_allocation`.
- For dom0, P2M pages should come from heap directly instead of p2m
pool, so that the kernel may take advantage of the extended regions.
- For xl guests, the setting of the p2m pool is called in
`XEN_DOMCTL_shadow_op` and the p2m pool is destroyed in
`domain_relinquish_resources`. Note that domctl->u.shadow_op.mb is
updated with the new size when setting the p2m pool.
- For dom0less domUs, the setting of the p2m pool is called before
allocating memory during domain creation. Users can specify the p2m
pool size by `xen,domain-p2m-mem-mb` dts property.
To actually allocate/free pages from the p2m pool, this commit adds
two helper functions namely `p2m_alloc_page` and `p2m_free_page` to
`struct p2m_domain`. By replacing the `alloc_domheap_page` and
`free_domheap_page` with these two helper functions, p2m pages can
be added/removed from the list of p2m pool rather than from the heap.
Since page from `p2m_alloc_page` is cleaned, take the opportunity
to remove the redundant `clean_page` in `p2m_create_table`.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: cbea5a1149
master date: 2022-10-11 14:28:44 +0200
This commit implements the `XEN_DOMCTL_shadow_op` support in Xen
for Arm. The p2m pages pool size for xl guests is supposed to be
determined by `XEN_DOMCTL_shadow_op`. Hence, this commit:
- Introduces a function `p2m_domctl` and implements the subops
`XEN_DOMCTL_SHADOW_OP_SET_ALLOCATION` and
`XEN_DOMCTL_SHADOW_OP_GET_ALLOCATION` of `XEN_DOMCTL_shadow_op`.
- Adds the `XEN_DOMCTL_SHADOW_OP_SET_ALLOCATION` support in libxl.
Therefore enabling the setting of shadow memory pool size
when creating a guest from xl and getting shadow memory pool size
from Xen.
Note that the `XEN_DOMCTL_shadow_op` added in this commit is only
a dummy op, and the functionality of setting/getting p2m memory pool
size for xl guests will be added in following commits.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: cf2a68d2ff
master date: 2022-10-11 14:28:42 +0200
This commit constructs the p2m pages pool for guests from the
data structure and helper perspective.
This is implemented by:
- Adding a `struct paging_domain` which contains a freelist, a
counter variable and a spinlock to `struct arch_domain` to
indicate the free p2m pages and the number of p2m total pages in
the p2m pages pool.
- Adding a helper `p2m_get_allocation` to get the p2m pool size.
- Adding a helper `p2m_set_allocation` to set the p2m pages pool
size. This helper should be called before allocating memory for
a guest.
- Adding a helper `p2m_teardown_allocation` to free the p2m pages
pool. This helper should be called during the xl domain destory.
This is part of CVE-2022-33747 / XSA-409.
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: 55914f7fc9
master date: 2022-10-11 14:28:39 +0200
The default paging memory (descibed in `shadow_memory` entry in xl
config) in libxl is used to determine the memory pool size for xl
guests. Currently this size is only used for x86, and contains a part
of RAM to shadow the resident processes. Since on Arm there is no
shadow mode guests, so the part of RAM to shadow the resident processes
is not necessary. Therefore, this commit splits the function
`libxl_get_required_shadow_memory()` to arch specific helpers and
renamed the helper to `libxl__arch_get_required_paging_memory()`.
On x86, this helper calls the original value from
`libxl_get_required_shadow_memory()` so no functional change intended.
On Arm, this helper returns 1MB per vcpu plus 4KB per MiB of RAM
for the P2M map and additional 512KB.
Also update the xl.cfg documentation to add Arm documentation
according to code changes and correct the comment style following Xen
coding style.
This is part of CVE-2022-33747 / XSA-409.
Suggested-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
master commit: 156a239ea2
master date: 2022-10-11 14:28:37 +0200
The list p2m->pages contain all the pages used by the P2M. On large
instance this can be quite large and the time spent to call
d->arch.paging.free_page() will take more than 1ms for a 80GB guest
on a Xen running in nested environment on a c5.metal.
By extrapolation, it would take > 100ms for a 8TB guest (what we
current security support). So add some preemption in p2m_teardown()
and propagate to the callers. Note there are 3 places where
the preemption is not enabled:
- hap_final_teardown()/shadow_final_teardown(): We are
preventing update the P2M once the domain is dying (so
no more pages could be allocated) and most of the P2M pages
will be freed in preemptive manneer when relinquishing the
resources. So this is fine to disable preemption.
- shadow_enable(): This is fine because it will undo the allocation
that may have been made by p2m_alloc_table() (so only the root
page table).
The preemption is arbitrarily checked every 1024 iterations.
We now need to include <xen/event.h> in p2m-basic in order to
import the definition for local_events_need_delivery() used by
general_preempt_check(). Ideally, the inclusion should happen in
xen/sched.h but it opened a can of worms.
Note that with the current approach, Xen doesn't keep track on whether
the alt/nested P2Ms have been cleared. So there are some redundant work.
However, this is not expected to incurr too much overhead (the P2M lock
shouldn't be contended during teardown). So this is optimization is
left outside of the security event.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
master commit: 8a2111250b
master date: 2022-10-11 14:24:48 +0200
The paging memory pool is currently freed in two different places:
from {shadow,hap}_teardown() via domain_relinquish_resources() and
from {shadow,hap}_final_teardown() via complete_domain_destroy().
While the former does handle preemption, the later doesn't.
Attempt to move as much p2m related freeing as possible to happen
before the call to {shadow,hap}_teardown(), so that most memory can be
freed in a preemptive way. In order to avoid causing issues to
existing callers leave the root p2m page tables set and free them in
{hap,shadow}_final_teardown(). Also modify {hap,shadow}_free to free
the page immediately if the domain is dying, so that pages don't
accumulate in the pool when {shadow,hap}_final_teardown() get called.
Move altp2m_vcpu_disable_ve() to be done in hap_teardown(), as that's
the place where altp2m_active gets disabled now.
This is part of CVE-2022-33746 / XSA-410.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
master commit: e7aa55c0aa
master date: 2022-10-11 14:24:21 +0200
Modify {hap,shadow}_free to free the page immediately if the domain is
dying, so that pages don't accumulate in the pool when
{shadow,hap}_final_teardown() get called. This is to limit the amount of
work which needs to be done there (in a non-preemptable manner).
Note the call to shadow_free() in shadow_free_p2m_page() is moved after
increasing total_pages, so that the decrease done in shadow_free() in
case the domain is dying doesn't underflow the counter, even if just for
a short interval.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
master commit: f50a2c0e1d
master date: 2022-10-11 14:23:51 +0200
This will in particular prevent any attempts to add entries to the p2m,
once - in a subsequent change - non-root entries have been removed.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
master commit: ff600a8cf8
master date: 2022-10-11 14:23:22 +0200
Prevent _shadow_prealloc() from calling BUG() when unable to fulfill
the pre-allocation and instead return true/false. Modify
shadow_prealloc() to crash the domain on allocation failure (if the
domain is not already dying), as shadow cannot operate normally after
that. Modify callers to also gracefully handle {_,}shadow_prealloc()
failing to fulfill the request.
Note this in turn requires adjusting the callers of
sh_make_monitor_table() also to handle it returning INVALID_MFN.
sh_update_paging_modes() is also modified to add additional error
paths in case of allocation failure, some of those will return with
null monitor page tables (and the domain likely crashed). This is no
different that current error paths, but the newly introduced ones are
more likely to trigger.
The now added failure points in sh_update_paging_modes() also require
that on some error return paths the previous structures are cleared,
and thus monitor table is null.
While there adjust the 'type' parameter type of shadow_prealloc() to
unsigned int rather than u32.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
master commit: b7f93c6afb
master date: 2022-10-11 14:22:53 +0200
Subsequently sh_set_toplevel_shadow() will be adjusted to install a
blank entry in case prealloc fails. There are, in fact, pre-existing
error paths which would put in place a blank entry. The 4- and 2-level
code in sh_update_cr3(), however, assume the top level entry to be
valid.
Hence bail from the function in the unlikely event that it's not. Note
that 3-level logic works differently: In particular a guest is free to
supply a PDPTR pointing at 4 non-present (or otherwise deemed invalid)
entries. The guest will crash, but we already cope with that.
Really mfn_valid() is likely wrong to use in sh_set_toplevel_shadow(),
and it should instead be !mfn_eq(gmfn, INVALID_MFN). Avoid such a change
in security context, but add a respective assertion.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: eac000978c
master date: 2022-10-11 14:22:24 +0200
hap_make_monitor_table() will return INVALID_MFN if it encounters an
error condition, but hap_update_paging_modes() wasn’t handling this
value, resulting in an inappropriate value being stored in
monitor_table. This would subsequently misguide at least
hap_vcpu_teardown(). Avoid this by bailing early.
Further, when a domain has/was already crashed or (perhaps less
important as there's no such path known to lead here) is already dying,
avoid calling domain_crash() on it again - that's at best confusing.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 5b44a61180
master date: 2022-10-11 14:21:56 +0200
Add a new parameter to p2m_teardown() in order to select whether the
root page table should also be freed. Note that all users are
adjusted to pass the parameter to remove the root page tables, so
behavior is not modified.
No functional change intended.
This is part of CVE-2022-33746 / XSA-410.
Suggested-by: Julien Grall <julien@xen.org>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
master commit: 1df52a2702
master date: 2022-10-11 14:21:23 +0200
At the moment the P2M page tables will be freed when the domain structure
is freed without any preemption. As the P2M is quite large, iterating
through this may take more time than it is reasonable without intermediate
preemption (to run softirqs and perhaps scheduler).
Split p2m_teardown() in two parts: one preemptible and called when
relinquishing the resources, the other one non-preemptible and called
when freeing the domain structure.
As we are now freeing the P2M pages early, we also need to prevent
further allocation if someone call p2m_set_entry() past p2m_teardown()
(I wasn't able to prove this will never happen). This is done by
the checking domain->is_dying from previous patch in p2m_set_entry().
Similarly, we want to make sure that no-one can accessed the free
pages. Therefore the root is cleared before freeing pages.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Tested-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: 3202084566
master date: 2022-10-11 14:20:56 +0200
During the domain destroy process, the domain will still be accessible
until it is fully destroyed. So does the P2M because we don't bail
out early if is_dying is non-zero. If a domain has permission to
modify the other domain's P2M (i.e. dom0, or a stubdomain), then
foreign mapping can be added past relinquish_p2m_mapping().
Therefore, we need to prevent mapping to be added when the domain
is dying. This commit prevents such adding of mapping by adding the
d->is_dying check to p2m_set_entry(). Also this commit enhances the
check in relinquish_p2m_mapping() to make sure that no mappings can
be added in the P2M after the P2M lock is released.
This is part of CVE-2022-33746 / XSA-410.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Tested-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: 3ebe773293
master date: 2022-10-11 14:20:18 +0200
This should only be called for the boot CPU to avoid calling _init code
after it has been unloaded.
Fixes: 062868a5a8 ("x86/amd: Work around CLFLUSH ordering on older parts")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 31b41ce858
master date: 2022-08-11 17:44:26 +0200
Introduce support in libxl for fetching the default backend trusted
option for disk and nic devices.
Users can set LIBXL_{DISK,NIC}_BACKEND_UNTRUSTED environment variable
to notify libxl of whether the backends for disk and nic devices
should be trusted. Such information is passed into the frontend so it
can take the appropriate measures.
This is part of XSA-403.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
When this logic was moved, it was moved across the point where nx is
updated to hold the new type for the page. IOW originally it was
equivalent to using x (and perhaps x would better have been used), but
now it isn't anymore. Switch to using x, which then brings things in
line again with the slightly earlier comment there (now) talking about
transitions _from_ writable.
I have to confess though that I cannot make a direct connection between
the reported observed behavior of guests leaving several pages around
with pending general references and the change here. Repeated testing,
nevertheless, confirms the reported issue is no longer there.
This is CVE-2022-33745 / XSA-408.
Reported-by: Charles Arnold <carnold@suse.com>
Fixes: 8cc5036bc3 ("x86/pv: Fix ABAC cmpxchg() race in _get_page_type()")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: a9949efb28
master date: 2022-07-26 14:54:34 +0200
Branch Type Confusion affects AMD/Hygon CPUs on Zen2 and earlier. To
mitigate, we require SMT safety (STIBP on Zen2, no-SMT on Zen1), and to issue
an IBPB on each entry to Xen, to flush the BTB.
Due to performance concerns, dom0 (which is trusted in most configurations) is
excluded from protections by default.
Therefore:
* Use STIBP by default on Zen2 too, which now means we want it on by default
on all hardware supporting STIBP.
* Break the current IBPB logic out into a new function, extending it with
IBPB-at-entry logic.
* Change the existing IBPB-at-ctxt-switch boolean to be tristate, and disable
it by default when IBPB-at-entry is providing sufficient safety.
If all PV guests on the system are trusted, then it is recommended to boot
with `spec-ctrl=ibpb-entry=no-pv`, as this will provide an additional marginal
perf improvement.
This is part of XSA-407 / CVE-2022-23825.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit d8cb7e0f06)
... as instructed in the Branch Type Confusion whitepaper.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 9deaf2d932)
BTC_NO indicates that hardware is not succeptable to Branch Type Confusion.
Zen3 CPUs don't suffer BTC.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 76cb04ad64)
We are going to need this to mitigate Branch Type Confusion on AMD/Hygon CPUs,
but as we've talked about using it in other cases too, arrange to support it
generally. However, this is also very expensive in some cases, so we're going
to want per-domain controls.
Introduce SCF_ist_ibpb and SCF_entry_ibpb controls, adding them to the IST and
DOM masks as appropriate. Also introduce X86_FEATURE_IBPB_ENTRY_{PV,HVM} to
to patch the code blocks.
For SVM, the STGI is serialising enough to protect against Spectre-v1 attacks,
so no "else lfence" is necessary. VT-x will use use the MSR host load list,
so doesn't need any code in the VMExit path.
For the IST path, we can't safely check CPL==0 to skip a flush, as we might
have hit an entry path before it's IBPB. As IST hitting Xen is rare, flush
irrespective of CPL. A later path, SCF_ist_sc_msr, provides Spectre-v1
safety.
For the PV paths, we know we're interrupting CPL>0, while for the INTR paths,
we can safely check CPL==0. Only flush when interrupting guest context.
An "else lfence" is needed for safety, but we want to be able to skip it on
unaffected CPUs, so the block wants to be an alternative, which means the
lfence has to be inline rather than UNLIKELY() (the replacement block doesn't
have displacements fixed up for anything other than the first instruction).
As with SPEC_CTRL_ENTRY_FROM_INTR_IST, %rdx is 0 on entry so rely on this to
shrink the logic marginally. Update the comments to specify this new
dependency.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 53a570b285)
We are shortly going to add a conditional IBPB in this path.
Therefore, we cannot hold spec_ctrl_flags in %eax, and rely on only clobbering
it after we're done with its contents. %rbx is available for use, and the
more normal register to hold preserved information in.
With %rax freed up, use it instead of %rdx for the RSB tmp register, and for
the adjustment to spec_ctrl_flags.
This leaves no use of %rdx, except as 0 for the upper half of WRMSR. In
practice, %rdx is 0 from SAVE_ALL on all paths and isn't likely to change in
the foreseeable future, so update the macro entry requirements to state this
dependency. This marginal optimisation can be revisited if circumstances
change.
No practical change.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit e9b8d31981)
We are about to introduce the use of IBPB at different points in Xen, making
opt_ibpb ambiguous. Rename it to opt_ibpb_ctxt_switch.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit a8e5ef079d)
We are about to introduce SCF_ist_ibpb, at which point SCF_ist_wrmsr becomes
ambiguous.
No functional change.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 76d6a36f64)
We are shortly going to need to context switch new bits in both the vcpu and
S3 paths. Introduce SCF_IST_MASK and SCF_DOM_MASK, and rework d->arch.verw
into d->arch.spec_ctrl_flags to accommodate.
No functional change.
This is part of XSA-407.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 5796912f72)
Support controling the PV/HVM suboption of msr-sc/rsb/md-clear, which
previously wasn't possible.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 27357c394b)
This will help parsing a sub-option which has boolean and non-boolean options
available.
First, rework 'int val' into 'bool has_neg_prefix'. This inverts it's value,
but the resulting logic is far easier to follow.
Second, reject anything of the form 'no-$FOO=' which excludes ambiguous
constructs such as 'no-$foo=yes' which have never been valid.
This just leaves the case where everything is otherwise fine, but parse_bool()
can't interpret the provided string.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 382326cac5)
STIBP and PSFD are slightly weird bits, because they're both implied by other
bits in MSR_SPEC_CTRL. Add fine grain controls for them, and take the
implications into account when setting IBRS/SSBD.
Rearrange the IBPB text/variables/logic to keep all the MSR_SPEC_CTRL bits
together, for consistency.
However, AMD have a hardware hint CPUID bit recommending that STIBP be set
unilaterally. This is advertised on Zen3, so follow the recommendation.
Furthermore, in such cases, set STIBP behind the guest's back for now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit fef244b179)
[Adjust for absence of INTEL_PSFD]
Back at the time of the original Spectre-v2 fixes, it was recommended to clear
MSR_SPEC_CTRL when going idle. This is because of the side effects on the
sibling thread caused by the microcode IBRS and STIBP implementations which
were retrofitted to existing CPUs.
However, there are no relevant cross-thread impacts for the hardware
IBRS/STIBP implementations, so this logic should not be used on Intel CPUs
supporting eIBRS, or any AMD CPUs; doing so only adds unnecessary latency to
the idle path.
Furthermore, there's no point playing with MSR_SPEC_CTRL in the idle paths if
SMT is disabled for other reasons.
Fixes: 8d03080d2a ("x86/spec-ctrl: Cease using thunk=lfence on AMD")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit ffc7694e0c)
Currently, amd_init_ssbd() works by being the only write to MSR_SPEC_CTRL in
the system. This ceases to be true when using the common logic.
Include AMD MSR_SPEC_CTRL in has_spec_ctrl to activate the common paths, and
introduce an AMD specific block to control alternatives. Also update the
boot/resume paths to configure default_xen_spec_ctrl.
svm.h needs an adjustment to remove a dependency on include order.
For now, only active alternatives for HVM - PV will require more work. No
functional change, as no alternatives are defined yet for HVM yet.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 378f2e6df3)
Juergen Gross