Spotted by Coverity after the recent similar fix to
libxl__create_qemu_logfile.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Allocate additional memory to the stub domain for qemu-traditional if
more than 4 MB is assigned to the video adapter to avoid out of memory
condition for QEMU.
For LIBXL_VGA_INTERFACE_TYPE_STD + CIRRUS video_memkb is always at
least 4MB. However if LIBXL_VGA_INTERFACE_TYPE_STD is selected the
video_memkb defaults to 0, resulting in a stubdom which is 4MB smaller
than before. It seems unlikely that VGA disable would require more
memory then the other options, so this should be ok.
Signed-off-by: Eric Shelton <eshelton@pobox.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- added second paragraph of commit message ]
In 31c836f4 "libxl: events: Permit timeouts to signal ao abort",
timeout callbacks take an extra rc argument.
In that patch the wrong assertion is made about the rc in
test_timedereg's `occurs' callback. Fix this to make the test pass
again.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This exercises the potential race between fd deregistration and
poll(). (Because we have control of the individual steps, we can do
the whole test in a single thread and ensure that the pessimal order
is always reached.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This allows a test case to have a poll-based event loop with exact
control of the sequence of operations.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Split LIBXL_TESTS into two variables, each of which gets all of
LIBXL_TESTS, so that we can have tests which do use generic test
helper inside functions, rather than test-specific ones.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It can happen that an fd is deregistered, and closed, and then a new
fd opened, and reregistered, all while another thread is in poll().
If this happens poll might report POLLNVAL, but the event loop would
think that the fd was supposed to have been valid, and then fail an
assertion:
libxl_event.c:1183: afterpoll_check_fd: Assertion `poller->fds_changed || !(fds[slot].revents & 0x020)' failed.
We can't simply ignore POLLNVAL because if we have bugs which cause
messed-up fds, it is a serious problem which we really need to detect.
Instead, add extra tracking to spot when this possibility arises, and
abort on POLLNVAL if we are sure that it is unexpected.
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
This makes the code more regular. We are going to want to do some
more work in poller_get and poller_put, which work also wants to be
done for poller_app.
Two very minor functional changes:
* We call malloc an extra time since poller_app is now a pointer
* ERROR_FAIL on poller_get failing for poller_app is generated in
libxl_ctx_init rather than passed through by libxl_poller_init
from libxl__pipe_nonblock.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
This is the final bit of untangling for Remus.
When libxc issues a checkpoint callback, start reading and buffering
all libxl records from the stream. Once a CHECKPOINT_END record is
encountered, start processing all records.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v4: Adjustments in line with review for earlier patches in the series
v3: Simplify, use named constants for API
And call it when a checkpoint record is found in the libxc stream.
Some parts of this patch have been based on patches from the COLO
series.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v3: Named constants for the API
v2: Borrow sufficient fragments from several COLO patches to get
BROKEN_CHANNEL and checkpoint failover to function.
when signalled to do so by libxl__remus_domain_checkpoint_callback()
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v4: Adjustments in line with review for earlier patches in the series
v3: Corrections to comments
This patch has changed substantially in v2 as a result of changes earlier in
the series. No behavioural difference from v1.
In a remus scenario, libxc will write a CHECKPOINT record, then hand
ownership of the fd to libxl. Libxl then writes any records required
and finishes with a CHECKPOINT_END record, then hands ownership of the
fd back to libxc.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
This is a complicated set of changes which must be done together for
bisectability.
* libxl-save-helper is updated to unconditionally use libxc migration v2.
* libxl compatibility workarounds in libxc are disabled for save operations.
* libxl__stream_write_start() is logically spliced into the event location
where libxl__xc_domain_save() used to reside.
* Ownership of the helper state moves into stream_write_state.
* xl is updated to indicate that the stream is now v2
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v4:
* Don't use _init() needlessly
v3: Many small changes, follwing similar review to the restore side
This contains the event machinery and state machines to write
non-checkpointed migration v2 stream (with the exception of the
xc_domain_save() handling which is spliced later in a bisectable way).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
v4: Don't make _init() mandatory, use FILLZERO(), adjust stream_success()
v3: Similar changes to the read side, following the read side review.
This is a complicated set of changes which must be done together for
bisectability.
* libxl-save-helper is updated to unconditionally use libxc migration
v2.
* libxl compatibility workarounds in libxc are disabled for restore
operations.
* libxl__stream_read_start() is logically spliced into the event
location where libxl__xc_domain_restore() used to reside.
* Ownership of the save_helper_state moves to stream_read_state.
The parameters 'hvm', 'pae', and 'superpages' were previously
superfluous, and are completely unused in migration
v2. callbacks->toolstack_restore is handled via a migration v2 record
now, rather than via a callback from libxc.
NB: this change breaks Remus. Further untangling needs to happen
before Remus will function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v4:
* Don't use _init() needlessly
v3:
* Simplify from v2.
* Alter the ownership of save_helper_state
v2:
* Drop "legacy_width" from the IDL
* Gain a LIBXL_HAVE_ to signify support of migration v2 streams
For backwards compatibility, a legacy stream needs converting before
it can be read by the v2 stream logic.
This causes the v2 stream logic to need to juggle two parallel tasks.
check_all_finished() is introduced for the purpose of joining the
tasks in both success and error cases.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
v4: Alter logic layout in check_all_finished()
v3: Simplified greatly from v2. No practical change.
Provide a thin wrapper around exec()ing the python conversion utility,
and a stub implementation for cases where conversion is not wanted
(i.e. not x86).
One complication is that the caller of this interface needs to assume
ownership of the output fd, to prevent it being closed while still in
use in a datacopier.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
v4: Formatting tweaks, description of the width field.
v3: Trimmed down massively from v2, provide libxl_no_convert_callout.c
This contains the event machinery and state machines to read an act on
a non-checkpointed migration v2 stream (with the exception of the
xc_domain_restore() handling which is spliced later in a bisectable
way).
It also contains some boilerplate to help support checkpointed
streams, which shall be introduced in a later patch.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
v4:
* Don't make _init() mandatory
* Don't unilaterally clobber rc from datacopier callback
* Comment adjustments
* More assertions
v3: More descriptions of the internal state, shuffle function order, add
an _init() call, condense error handling
Introduced at this point so the python stream conversion code has a
concrete ABI to use. Later when libxl itself starts supporting a v2
stream, it will be added to XL_MANDATORY_FLAG_ALL.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
v2: Expand commit message
In the case that fd is -1, preserve errno and don't attempt to set
CLOEXEC.
Note that the implementation can still fail, as it ignores fcntl()
errors and may not set CLOEXEC properly. Update the documentation
accordingly until it is fixed.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
Fixing the fnctl() error issue involves more TUITs than I currently
have.
New in v4
Currently, libxl__xc_domain_{save,restore}() have specific knowledge
of where the libxl__save_helper_state lives inside a
libxl__domain_{create,save}_state object.
In later changes, the logical ownership of the
libxl__save_helper_state will change and will no longer be
d{c,s}s->shs.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
New in v3
With migration v2, there are several moving parts needing to be
juggled at once. This requires the error handling logic to be able to
query the state of each moving part, possibly before they have been
started, and be able to cancel them.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
v4: Don't force _init() to be mandatory
v3: Adjust helper_{stop,failed,done} to use libxl__save_helper_inuse()
v2: Add an _init() function which allows _inuse() to be safe to call even
before the save helper has started.
In a future patch, we shall support automatically converting a legacy
stream to a v2 stream, in which case libxc needs to read from a
different fd.
Simply overwriting restore_fd does not work; the two fd's have
different circumstances. The restore_fd needs to be returned to its
original state before libxl_domain_create_restore() returns, while in
the converted case, the fd needs allocating and deallocating
appropriately.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
New in v2
Shortly more parameters will appear, and this saves unboxing each one.
libxl_domain_restore_params is mandatory for restore streams, and
ignored for plain creation. The old 'checkpointed_stream' was
incorrectly identified as a private parameter when it was infact
public.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Reviewed-by: Yang Hongyang <yanghy@cn.fujitsu.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
---
Since v1:
* Gate validity on restore_fd being valid.
as a wrapper to kill(2), and use it in preference to sendsig in
libxl_save_callout.c.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
---
v3: Fix typo, add _hidden
Logically new in v2 - split out from a v1 change which was itself a
cherrypick-and-modify from the AO Abort series
Don't dereference extra_config if it's NULL. Don't leak extra_config in
the end.
Also fixed a typo in error string while I was there.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
One is to combine malloc + libxl__alloc_failed. The other is to avoid
dereferencing NULL pointer in case of malloc failure. Also use gc for
memory allocation and remove free() in second case.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
That argument should not be NULL. Let subsequent dereferencing crashes
the process.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If libxl_create_logfile fails for some reason then
libxl__create_qemu_logfile previously just carried on and dereferenced
the uninitialised logfile.
Check for the error from libxl_create_logfile, which has already
logged for us.
This was reported as Debian bug #784880.
Reported-by: Russell Coker <russell@coker.com.au>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: 784880@bugs.debian.org
Acked-by: Wei Liu <wei.liu2@citrix.com>
CentOS7 complains that 'ret' might be unused, and indeed this is the case for
`xl psr-hwinfo --cat`.
The logic for selecting which information to print was rather awkward.
Introduce a new 'all' which default to true, and is cleared if specific
options are selected. This allows for a far more clear logic when choosing
whether to print information or not.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Chao Peng <chao.p.peng@linux.intel.com>
A platform may have a GIC compatible with previous version of the
device.
This is allow to virtualize an unmodified OS on new hardware if the GIC
is compatible with older version.
When a guest is created, the vGIC will emulate same version as the
hardware. Although, the user can specify in the configuration file the
preferred version (currently only GICv2 and GICv3 are supported).
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Usage:
hdtype=ide|ahci (default=ide)
If hdtype=ahci adds ich9 disk controller in ahci mode and uses it with
upstream qemu to emulate disks instead of ide.
It doesn't support cdroms which still using ide (cdroms will use
"-device ide-cd" as new qemu parameter)
Ahci requires new qemu parameter but for now other emulated disks cases
remains with old ones (I did it in other patch, not needed by this one)
I did it as libxl parameter disabled by default to avoid possible
problems:
- with save/restore/migration (restoring with ahci a domU that was with
ide instead)
- windows < 8 without pv drivers (a registry key change is needed for
AHCI<->IDE change FWIK to avoid possible blue screen)
- windows XP or older that many not support ahci by default.
Setting AHCI with libxl parameter and default to disabled seems the best
solution.
AHCI increase hvm domUs boot performance. On linux hvm domU I saw up to
only 20% of the previous total boot time, whereas boot time decrease a
lot on W7 domUs for most of boots I have done. Small difference in boot
time compared to ide mode on W8 and newer (probably other xen
improvements or fixes are needed not ahci related)
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- adjust name of LIBXL_HAVE #define as discussed on list,
fixup pod syntax in xl.cfg.pod.5 ]
This is the xc/xl changes to support Intel Cache Allocation
Technology(CAT).
'xl psr-hwinfo' is updated to show CAT info and two new commands
for CAT are introduced:
- xl psr-cat-cbm-set [-s socket] <domain> <cbm>
Set cache capacity bitmasks(CBM) for a domain.
- xl psr-cat-show <domain>
Show CAT domain information.
Examples:
[root@vmm-psr vmm]# xl psr-hwinfo --cat
Cache Allocation Technology (CAT):
Socket ID : 0
L3 Cache : 12288KB
Maximum COS : 15
CBM length : 12
Default CBM : 0xfff
[root@vmm-psr vmm]# xl psr-cat-cbm-set 0 0xff
[root@vmm-psr vmm]# xl psr-cat-show
Socket ID : 0
L3 Cache : 12288KB
Default CBM : 0xfff
ID NAME CBM
0 Domain-0 0xff
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Add libxl_socket_bitmap_alloc() to allow allocating a socket specific
libxl_bitmap (as it is for cpu/node bitmap).
Internal function libxl__count_physical_sockets() is introduced together
to get the socket count when the size of bitmap is not specified.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Ian Jackson
Ian Campbell
Eric Shelton
Andrew Cooper
Ross Lagerwall
Wei Liu
Julien Grall
Fabio Fantoni
Chao Peng