Replace the separate timeout and xenstore watch with use of
libxl__xswait*.
Different control flow, but no ultimate functional change apart from
slight changes to the text of error messages.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If a suspend callback fails, it has a libxl error code in its hand.
However we must return to libxc the values that libxc expects. So we
stash the libxl error code in dss->rc and fish it out again after
libxc returns from the suspend call.
While we're here, abolish the now-redundant `ok' variable in
remus_devices_postsuspend_cb.
The overall functional change is that libxl_domain_save now completes
with the correct error code as determined when the underlying failure
happened. (Usually this is, still, ERROR_FAIL.)
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Add cleanup in remus_devices_postsuspend_cb.
Change the following functions to take a libxl error code rather than
a boolean "ok" value, and translate that value to the boolean expected
by libxc at the last moment:
domain_suspend_callback_common_done } dss->callback_common_done
remus_domain_suspend_callback_common_done }
domain_suspend_common_done
Also, abolish domain_suspend_common_failed as
domain_suspend_common_done can easily do its job and the call sites
now have to supply the right rc value anyway.
In domain_suspend_common_guest_suspended, change "ret" to "rc"
as it contains a libxl error code.
There is no functional change in this patch: the proper rc value now
propagates further, but is still eventually smashed to a boolean.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
---
v2: Fix a leftover comment referring to domain_suspend_common_failed
switch_logdirty_done used to take the value to pass to
libxl__xc_domain_saverestore_async_callback_done (ie, the return value
from the callback). (This was mistakenly described as "ok" in the
prototype, but in the definition it is "broke" and all the call sites
passed 0 for success or -1 for error.)
Instead, make it take a libxl error code (rc). Convert this to the
suspend callback value at the end.
No functional change in this patch.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This doc comment about ao lifecycle failed to mention the option of
completing the ao during the initiator function. (Indeed, the most
obvious reading would forbid it.)
Restructure the comment, describe this situation, and generally
improve the wording.
Also, fix a grammar problem (missing word `a').
Reported-by: Koushik Chakravarty <koushik.chakravarty@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
There is an issue in libxl_set_memory_target whereby the target and
the max mem can get out of sync, this is because the call the
xc_domain_setmaxmem is not tied in any way to the xenstore transaction
which controls updates to the xenstore side of things.
Consider a domain with 1M of RAM (==target and maxmem for the sake of
argument) and two simultaneous calls to libxl_set_memory_target, both
with relative=0 and enforce=1, one with target=3 and the other with
target=5.
target=5 call target=3 call
transaction start
transaction start
write target=5 to xenstore
write target=3 to xenstore
setmaxmem(5)
setmaxmem(3)
transaction commit = success
transaction commit = EAGAIN
At this point maxmem=3 while target=5.
In reality the target=3 case will the retry and eventually (hopefully)
succeed with target=maxmem=3, however the bad state will persist for
some window which is undesirable. On failure other than EAGAIN all
bets are off anyway, but in that case we will likely stick in the bad
state until someone else sets the memory).
To fix this we slightly abuse the userdata lock which is used to
protect updates to the domain's json configuration. Abused because
maxmem is not actually stored in there, but is kept by Xen. However
the lock protects some semantically similar things and is convenient
to use here too.
libxl_domain_setmaxmem also takes the lock, since it reads
memory/target from xenstore before calling xc_domain_setmaxmem there
is a small (but perhaps not very interesting) race there too.
There is on more use of xc_domain_setmaxmem in libxl__build_pre.
However taking a lock around this would be tricky since the xenstore
parts are not done until libxl__build_post. I think this one could be
argued to be OK since the domid is not "public" yet, that is it has
not been returned to the application yet (as the result of the create
operation). Toolstacks which go round fiddling with random domid's
which they find lying on the floor should be taught to do better.
Add a doc note that taking the userdata lock requires the CTX_LOCK to
be held.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This reverts commit 0c029c4da2.
A new memory model that allows QEMU to bump memory behind libxl's back
was merged a few months ago. We didn't fully understand the
repercussions back then. Now it breaks migration and becomes blocker of
4.6 release.
It's better to restore to original behaviour at this stage of the
release cycle, that would put us in a position no worse than before, so
the release is unblocked.
The said function is still racy after reverting these two patches.
Making domain memory state consistent requires a bit more work. Separate
patch(es) will be sent out to deal with that problem.
Fix up conflicts with f5b43e95 (libxl: fix "xl mem-set" regression from
0c029c4da2).
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When the property "clock-frequency" is present in the DT timer node, it
means that the bootloader/firmware didn't correctly configure the
CNTFRQ/CNTFRQ_EL0 on each processor.
The best solution would be to fix the offending firmware/bootloader,
although it may not always be possible to modify and re-flash it.
As it's not possible to trap the register CNTFRQ/CNTFRQ_EL0, we have
to extend xen_arch_domainconfig to provide the timer frequency to the
toolstack when the property "clock-frequency" is present to the host DT
timer node. Then, a property "clock-frequency" will be created in the guest
DT timer node if the value is not 0.
We could have set the property in the guest DT no matter if the property
is present in the host DT. Although, we still want to let the guest
using CNTFRQ in normal case. After all, the property "clock-frequency"
is just a workaround for buggy firmware.
Also add a stub for fdt_property_u32 which is not present in libfdt <
1.4.0 used by distribution such as Debian Wheezy.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Tested-by: Chris Brand <chris.brand@broadcom.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
This patch does following things:
1. Document v1 format.
2. Factor out function to handle QEMU restore data and function to
handle v1 blob for restore path.
3. Refactor save function to generate different blobs in the order
specified in format specification.
4. Change functions to use "goto out" idiom.
No functional changes introduced.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
These files are leaked when using qemu-trad stubdom. They are
intermediate files created by libxc. Unfortunately they don't fit well
in our userdata scheme. Clean them up after we destroy all userdata,
we're sure they are not useful anymore at that point.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The snippet to destroy stubdom and the callback were added in 1fc3aeb3
("libxl: use new QEMU xenstore protocol"). The intention was to destroy
stubdom when it is not responsive. That approach is problematic because
rc is not propagate back to sdss->callback, hence the guest is leaked.
The solution is simple. The destruction of stubdom can be done later in
sdss->callback. That code path already does the right thing to destroy
both the guest and the stubdom that serves the guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch does two thing:
The original code erroneously fills in xc_hvm_build_args before
generating vmemranges. The effect is that guest memory is populated
without vNUMA information. Move the hunk to right place to fix this.
Move the subtraction of video ram to libxl__vnuma_build_vmemrange_hvm
because it's the central place for generating vmemranges.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When building HVM guests, originally some fields of xc_hvm_build_args
are filled in xc_hvm_build (and buried in the wrong function), some are
set in libxl__build_hvm before passing xc_hvm_build_args to
xc_hvm_build. This is fragile.
After examining the code in xc_hvm_build that sets those fields, we can
in fact move setting of mmio_start etc in libxl. This way we consolidate
memory layout setting in libxl.
The setting of firmware data related fields is left in xc_hvm_build
because it depends on parsing ELF image. Those fields only point to
scratch data that doesn't affect memory layout.
There should be no change in the generated guest memory layout. But the
semantic is changed for xc_hvm_build. Toolstack that built directly on
top of libxc need to adjust to this change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: "Chen, Tiejun" <tiejun.chen@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The current base directory /var/xen/dump for domU dumps will be patched
to /var/lib/xen/dump by most distros to follow FHS.
This change does three things:
- change the default from /var/xen/dump to /var/lib/xen/dump
- provide a configure option to avoid patching the source.
- update docs to refer to the new default location
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- s,/var,LOCALSTATEDIR, in help test, ran autogen.sh ]
We have now arranged for SECINITSID_DOMU and SECINITSID_DOMDM to be
defined (correspondng to system_u:system_r:domU_t and
system_u:system_r:dm_dom_t respectively in the default policy). Use
these as the default for the SSID of every (stub)domain.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Wei.Liu2@citrix.com
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Using gcc 4.8 to compile with -Werror.
xl_cmdimpl.c:5493:8: error: 'valid_devs' may be used uninitialized in this function [-Werror=maybe-uninitialized]
if (valid_devs == 0)
^
xl_cmdimpl.c:5455:9: note: 'valid_devs' was declared here
int valid_devs;
Signed-off-by: Charles Arnold <carnold@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Said commit ("libxl_set_memory_target: retain the same maxmem offset on
top of the current target") caused a regression for "xl mem-set"
against Dom0: While prior to creation of the first domain this works,
the first domain creation involving ballooning breaks. Due to "enforce"
not being set in the domain creation case, and due to Dom0's initial
->max_pages (in the hypervisor) being UINT_MAX, the calculation of
"memorykb" in the first "xl mem-set" adusting the target upwards
subsequent to domain creation and termination may cause an overflow,
resulting in Dom0's maximum getting to a very small value. This small
maximum will the make the subsequent setting of the PoD target fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xm migrate would do non-live migration (effectively, save, transfer
and restore) by default, unless you specified --live.
xl migrate always does live migration. Honour (by ignoring) --live
for compatibility with old callers. Document this.
(This patch should be backported as far as possible.)
Reported-by: Matthew Vernon <mcv21@cam.ac.uk>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Matthew Vernon <mcv21@cam.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
On ARM, every non-PCI device are described in the device tree. Each of
them can be found via a path.
This patch introduces a very basic support, only the IOMMU will be set
up correctly. The user will have to:
- Describe the device in the partial device tree
- Map manually MMIO/IRQ
This is a first approach, that will allow to have a basic Device Tree
passthrough support in Xen. This could be improved later.
Furthermore add LIBXL_HAVE_DEVICETREE_PASSTHROUGH to indicate we
support Device Tree passthrough and partial device tree (introduced by a
previous patch).
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
The partial device tree may contains phandle. The Device Tree Compiler
tends to allocate the phandle from 1.
Reserve the ID 65000 for the GIC phandle. I think we can safely assume
that the partial device tree will never contain a such ID.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Allow the user to pass additional nodes to the guest device tree. For
this purpose, everything in the node /passthrough from the partial
device tree will be copied into the guest device tree.
The node /aliases will be also copied to allow the user to define
aliases which can be used by the guest kernel.
A simple partial device tree will look like:
/dts-v1/;
/ {
#address-cells = <2>;
#size-cells = <2>;
passthrough {
compatible = "simple-bus";
ranges;
#address-cells = <2>;
#size-cells = <2>;
/* List of your nodes */
}
};
Note that:
* The interrupt-parent property will be added by the toolstack in
the root node
* The properties compatible, ranges, #address-cells and #size-cells
in /passthrough are mandatory.
The helpers provided by the libfdt don't perform all the necessary
security check on a given device tree. Therefore, only trusted device
tree should be used.
Note: The partial device tree code requires the presence of libfdt
functions which have been only correctly exported in libfdt 1.4.0 and
higher. All the major distributions but Debian Wheezy are using v1.4.0
or higher. It has been decided to disable partial device tree support on
OSes where libfdt doesn't meet the requirement.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
The functions fdt_{first,next}_subnode may not be available because:
* It has been introduced in 2013 => Doesn't work on Wheezy
* The prototype exists but the functions are not exposed. Don't ask
why...
The later has been fixed recently in the dtc repo [1]
When the functions are not available, implement our own in order to use
them in a following patch.
Note that the _hidden attribute is placed in both the prototype and the
declaration because some version of libfdt expose the prototype but not
the declaration.
[1] git://git.kernel.org/pub/scm/utils/dtc/dtc.git
commit a4b093f7366fdb429ca1781144d3985fa50d0fbb
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh ]
The old code checks the callbacks "postcopy & checkpoint", if the
callbacks exists, it will call them. However this is unreliable, so
add this flag to explicitly indicate a checkpointed stream in the new
code. This is backward compatible with the legacy migration just don't
know this flag and will ignore it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Yang Hongyang <yanghy@cn.fujitsu.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
[ ijc -- added discussion of legacy compat ]
.. and use this new interface to display it along with CPU topology
and NUMA information when 'xl info -n' command is issued
The output will look like
...
cpu_topology :
cpu: core socket node
0: 0 0 0
...
device topology :
device node
0000:00:00.0 0
0000:00:01.0 0
...
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_numainfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error logging macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xc_cputopoinfo() is not expected to be used on a hot path and therefore
hypercall buffer management can be pushed into libxc. This will simplify
life for callers.
Also update error reporting macros.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
ARM and x86 use a different hypercall to map an IRQ to a domain.
The hypercall to give IRQ permission to the domain has also been moved
to be an x86 specific function as ARM guest won't be able to manage the IRQ.
We may want to support it later.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Each domain may have a different number of IRQs depending on the devices
assigned to it.
Rather than re-using the number of IRQs used by the hardwared GIC, let
the toolstack specify the number of SPIs when the domain is created.
This will avoid wasting memory.
To calculate the number of SPIs, we take advantage of the fact that the
libxl interface can only expose 1:1 mapping and look for the largest SPI
in the list.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Jan Beulich <jbeulich@suse.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Handle NULL pointer passed to xlu_cfg_destroy. libvirt calls it in its
libxlDriverConfigDispose function. If the XLU_Config was not initialized
yet for some reason a crash would occur on cleanup.
Avoid the crash just like libxl_ctx_free and xtl_logger_destroy do when
called from the same context.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Usage:
vga="qxl"
Qxl vga support many resolutions that not supported by stdvga,
mainly the 16:9 ones and other high up to 2560x1600.
With QXL you can get improved performance and smooth video also
with high resolutions and high quality.
Require their drivers installed in the domU and spice used
otherwise act as a simple stdvga.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Signed-off-by: Zhou Peng <zpengxen@gmail.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Convert all plain ints and strings which are used for xenbus "state"
files to xenbus_state. This makes it easier to find code which deals
with backend/frontend state changes.
Convert usage of libxl__sprintf to GCSPRINTF.
No change in behaviour is expected by this change, beside a small
increase of runtime memory usage in places that used a string constant.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Prior to 1a09c5113a ("libxlu: rework internal representation of
setting") empty lists in config files did get accepted. Restore that
behavior.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Always recheck with poll() right before making the callback.
All sorts of things may have happened since poll() originally signaled
the fd. We would like the main functional libxl code not to have to
worry about spurious wakeups.
In particular, this fixes a bug in the save/restore callout: the save
helper message reader operates with the fd in blocking mode. In a
multithreaded program one thread might have eaten all the messages out
of the fd while another one is busy returning from poll and reacquiring
the libxl lock, possibly resulting in a deadlock.
(Also, we abolish the anomalous direct caller of efd->func.)
Reported-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reported-by: Jim Fehlig <jfehlig@suse.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
No functional change, only code motion.
Currently, contrary to this function's name, there are two sites where
efd->func() is called so one of them doesn't go through here just yet.
That will be dealt with in the next commit.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Jim Fehlig <jfehlig@suse.com>
CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
New functions to provide logical and and or of two bitmaps. These are
generically useful utility functions added to the public API for the
benefit of libxl's users.
In the future they may also be useful internally, e.g. in the
vNUMA configuration check function.
Signed-off-by: Linda Jacobson <lindaj@jma3.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- rewrote commit message and fixed typo ]
Ian Jackson
Ian Campbell
Wei Liu
Julien Grall
Olaf Hering
Andrew Cooper
Charles Arnold
Jan Beulich
Julien Grall
Boris Ostrovsky
Fabio Fantoni
Giuseppe Mazzotta
Linda Jacobson