When xend is restarted, bootloader settings of all running domains are
lost. The attached patches fixes this by saving bootloader and
bootloader_args to xenstore database.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
I saw an error message when I shut down a domain. The error
message showed that release of device(vbd/51712) failed. But the
device was tap, was not vbd. I think that a cause of the error message is
because _releaseDevices() calls destroyDevice() by wrong device class.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
The attached patch relaxes the sanity check on guest configuration
when assigning a acm label to the guest. This patch makes a guest
configuration accept a bootloader parameter. This is common for
paravirtualized guests to boot them by using pygrub.
Signed-off-by: INAKOSHI Hiroya <inakoshi.hiroya@jp.fujitsu.com>
This patch reflects some pci interface changes in pciif.h in XEN head
file. And also add domain shutdown support in xend for shutting domain
from DOM0 kernel when non-recoverable uncorrected pci error happens.
Signed-off-by: Jiang Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Ke Liping <liping.ke@intel.com>
This patch allows domains to be resumed on different number of CPUs. After
c/s 18764, a domain cannot be resumed when _setCPUAffinity() fails, which
happens when affinity should be set to a non-existent CPU. This patch
makes _setCPUAffinity() errors nonfatal.
Signed-off-by: Jiri Denemark <jdenemar@redhat.com>
The pvops dom0 kernel does not expose the balloon driver via
/proc/xen, so use the sysfs interface.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Move affinity-setting logic into its own function and call from
relevant places.
From: Jiri Denemark <jdenemar@redhat.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
The net changes of this patch are that the reader-side lock is put
into the path of the migration code and the writer lock into the path
of the code that handles the changing of the policy. Simultaneous
migrations of multiple hosts still work after this lock has been added.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
This patch adds a reader-writer lock primitive to xend since python
does not provide it by default. The implementation is based on a
condition variable. Some test code is appended at the end of the file.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
When a domU is configured for a serial port as documented at:
http://wiki.xensource.com/xenwiki/InstallationNotes
the VM does see the serial port, however when dom0 is rebooted and
the VM started it no longer has access to the serial port.
xm list -l <vm> no longer shows the ioports or irq attributes
Attached patch adds implementation of getDeviceConfiguration(),
returns details dict and implements waitForDevice() to irqif.py and
iopif.py.
Also added preprocess_irq() to create.py.
Signed-off-by: Pat Campbell <plc@novell.com>
From reading xend code related to changing number of vcpus it appears
setting the number of vcpus to a value greater than VCPUs_max is not
allowed on a running domain. This restriction is not honored by
setVCpuCount() in XendDomainInfo.py. Attached patch makes
setVCpuCount() fail if vcpus > VCPUs_max and domain is running.
Also, I think the changes should be reflected in managed config of
running domain if in fact the domain is managed - so unconditionally
call managed_config_save().
BTW, the original code is rather confusing. Essentially the same
actions are taken regardless if self.info['VCPUs_max'] > vcpus, just
the order of invocation is changed. But this doesn't seem to matter
since self.info['VCPUs_live'] is not subsequently used.
Signed-off-by: Jim Fehlig <jfehlig@novell.com>
Basically, I implemented XenAPI for pvSCSI according to the patch of
XenAPI document which I sent before. However, I renamed the class
name of virtual SCSI devices to "DSCSI".
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Some distro kernels do not handle spurious page faults so allow these
to be supressed on a per VM basis.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
A minimal implementation of the Viridian (Hyper-V) guest
interface. The only enlightenments advertised and supported are vAPIC
MSRs and long-spin-wait notifications. The set of enlightenments can
easily be extended in future, as they are found to provide a
performance win, and configured via an extended HVM_PARAM_VIRIDIAN hvm
parameter.
Signed-off-by: Peter Johnston <peter.johnston@citrix.com>
Signed-off-by: Tim Deegan <tim.deegan@citrix.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This protects critical data like
/local/domain/<domid>/console/{tty,limit}. It also means we can trust
.../vm, and hence do not need /vm_path. Various parts of the previous
two changesets disappear.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch moves some dom0 variables and backend device
configuration from frontend directories to
/local/domain/<backdomid>/backend or /vm.
Also,
- /vm_path/<domid> is introduced, referencing the /vm path
- /vm_path/device/backend holds the backend device location,
rather than storing it in the frontend directory
Signed-off-by: Pascal Bouchareine <pascal@gandi.net>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In xm start the --vncviewer option has no effect, instead -c tries to
both connect to the console and start vncviewer. Additionally, to
start vncviewer it uses the domid variable which is only defined a few
lines later. Thus xm start -c doesn't work at all.
This patch fixes both problems.
Signed-off-by: Kevin Wolf <kwolf@suse.de>
This patch will make xm return a exit code of 3 if `xm list
<non_existant_domain>` is done rather than the generic code of 1. I
used 3 because XendClient had a macro setup pointing
ERROR_INVALID_DOMAIN to 3.
From: "Shaun R." <mailinglists@unix-scripts.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Without this patch, vncviewer processes remain as follows.
This patch fixes it.
> # pgrep -fl vnc
> 4303 vncviewer -log *:stdout:0 -listen 5501
> 5089 vncviewer -log *:stdout:0 -listen 5502
> 5763 vncviewer -log *:stdout:0 -listen 5503
details:
Since 21dd1fdb73d8 there have been (as far as I can see) three
separate mechanisms for achieving a VNC display:
1. xm spawns vncviewer after getting vnc display info
from qemu-dm via xenstore (introduced in 21dd1fdb73d8)
2. xm spawns vncviewer -listen and qemu-dm connects to it
3. qemu-dm spawns vncviewer (!)
The latter two are rather strange - No.3 is very strange indeed.
So I decided that rather than try to get No.2 or No.3 on track for
going into qemu upstream, No.2 and No.3 would be dropped.
After discussion on xen-devel the mechanism No.1 was introduced,
above.
No.1 is controlled by the --spawn-vncviewer (and --vncviewer-autopass)
command line options to xm, by analogy with the -c option.
Nos.2 and 3 are controlled by elements of the domain configuration
file - and their code still remains. So if you turn all of the vnc
options on you can get several vncviewers (although only one of them
will work).
This patch removes the support for the passive connection mode No.2
After all ioemu-remote will never connect to such a vncviewer.
The options to engage this functionality were already removed from
the example config files by Keir in 18241:bf4ef45e6a38.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
- This minor patch implements the missing stub function
security_label_to_details in the dummy module. This stub function is
necessary to create domains with network interfaces for modules that
do not implement the security_label_to_details function.
Signed-off-by: George Coker <gscoker@alpha.ncsc.mil>
- This patch fixes a small casting bug in xm. The value of domid was
not returned as an int, causing commands like 'xm vncviewer domid'
to fail.
Signed-off-by: George Coker <gscoker@alpha.ncsc.mil>
There is an python indentation issue keeping the full range of syntax
for the cpuid config file parameter from working correctly. This
patch fixes that. It also fixes some misspelling and a missing 'x' in
two of the example config files (must have 32 bits represented for
cpuid registers).
Signed-off-by: Bruce Rogers <brogers@novell.com>
- The patch does away with the autogenerated xsm.py file and
introduces a config parameter in xend-config.sxp to determine the
security module. The parameter is (xsm_module_name {acm, dummy,
flask}). The default setting/option is dummy. .hgignore is also
updated to stop ignoring xsm.py on commits.
- The patch has created an xsconstant for XS_POLICY_FLASK and updated
the toolchain to check the instance of XS_POLICY_USE. XS_POLICY_USE
evalauates to XS_POLICY_FLASK or XS_POLICY_ACM or XS_POLICY_DUMMY
depending on configuration.
- Flask relies on the current value of ssidref returned by dominfo to
ensure that the label to sid mapping is consistent. ssidref had
been pop'ed from the dominfo object. The patch addresses this
issue.
- Flask python module style cleanups.
Signed-off-by: George Coker <gscoker@alpha.ncsc.mil>
This patch moves the call to XendDevices.destroy_device_state() to the
function _remove_domain. Previously only Xen-API calls were calling
the destroy_device_state() function.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
When domains are destroyed, _prepare_phantom_paths() method
and _cleanup_phantom_devs() method are called twice as follows.
destroy()@XendDomainInfo.py
_prepare_phantom_paths() --------------- 1
_cleanupVm()
destroyDomain()
_prepare_phantom_paths() ----------- 2
xc.domain_destroy_hook()
xc.domain_pause()
do_FLR()
xc.domain_destroy()
XendDomain.remove_domain()
cleanupDomain()
_cleanup_phantom_devs() ------------ 1
_cleanup_phantom_devs() ---------------- 2
XendDomain.domain_delete_by_dominfo()
This is a cleanup patch. It combines destroyDomain() method
into destroy() method, then _prepare_phantom_paths() method and
_cleanup_phantom_devs() method are called only once.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
Keir Fraser