The ptr calculation shall take the offset into the page into account
when ptr is valid.
Reported regression on NetBSD's port-xen with last known working libxen
being rev 2.9. This corrupts the kernel symbol table when the table is
not loaded on a page boundary.
Issue was tracked down by FastIce and Jeff Rizzo. See also
http://mail-index.netbsd.org/port-xen/2013/10/16/msg008088.html
Signed-off-by: Jean-Yves Migeon <jym@NetBSD.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Coverity ID 1055563
In the original function, mmap() could be called with a length of -1 if the
second lseek failed and the caller had not provided max_size.
While fixing up this error, improve the logging of other error paths. I know
from personal experience that debugging failures function is rather difficult
given only "xc_dom_malloc_filemap: failed (on file <somefile>)" in the logs.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Making room for a 64 bit implementation.
Also fix a typo and stop refering to it as a bzImage, which is an x86-ism.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
The tools and the hypervisor need to agree on various aspects of the guest
environment, such as interrupt numbers, memory layout, initial register values
for registers which are implementation defined etc. Therefore move the
associated defines into the public interface headers, or create them as
necessary.
This just exposes the current de-facto standard guest layout, which may be
subject to change in the future. This deliberately does not make the guest
layout dynamic since there is currently no need.
These values should not be exposed to guests, they should find these things
out via device tree or should not be relying on implementation defined
defaults.
Various bits of the hypervisor needed to change to configure dom0 with the real
platform values while using the virtual platform configuration for guests.
Arrange for this where appropriate and plumb through as needed.
We also need to expose some 64-bit values (e.g. PSR_GUEST64_INIT) for the
benefit of 32 bit toolstacks building 64 bit guests.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
In order to set up the grant table for HVM guests, libxc needs to map
the grant table temporarily. At the moment, it does this by adding the
grant page to the HVM guest's p2m table in the MMIO hole (at gfn 0xFFFFE),
then mapping that gfn, setting up the table, then unmapping the gfn and
removing it from the p2m table.
This breaks with PVH guests with 4G or more of ram, because there is
no MMIO hole; so it ends up clobbering a valid RAM p2m entry, then
leaving a "hole" when it removes the grant map from the p2m table.
Since the guest thinks this is normal ram, when it maps it and tries
to access the page, it crashes.
This patch maps the page at max_gfn+1 instead.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Eddie Dong <eddie.dong@intel.com>
This error case can only be triggered by gzread returning 0 (and having
not read anything), so move it there.
Coverity-ID: 1056076
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We don't check for null pointers in similar functions, and it's silly to
do so for these arguments here anyway; they should fail noisily if null
is passed.
While at it, remove pointless brackets.
Coverity-ID: 1055938
Coverity-ID: 1055939
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Patch generated by the following semantic patch
(http://coccinelle.lip6.fr/):
@@
expression *P;
@@
- if(P) free(P);
+ free(P);
...and then by filtering through the following command:
filterdiff -p1 -x 'stubdom/*' -x 'tools/firmware/*' -x 'tools/qemu-*' -x 'tools/blktap*'
Signed-off-by: Matthew Daley <mattjd@gmail.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Commit 00a4b65f85 Sep 7 2010
"libxc: provide notification of final checkpoint to restore end"
broke migration from any version of Xen using tools from prior to that commit
Older tools have no idea about an XC_SAVE_ID_LAST_CHECKPOINT, causing newer
tools xc_domain_restore() to start reading the qemu save record, as
ctx->last_checkpoint is 0.
The failure looks like:
xc: error: Max batch size exceeded (1970103633). Giving up.
where 1970103633 = 0x756d6551 = *(uint32_t*)"Qemu"
With this fix in place, the behaviour for normal migrations is reverted to how
it was before the regression; the migration is considered non-checkpointed
right from the start. A XC_SAVE_ID_LAST_CHECKPOINT chunk seen in the
migration stream is a nop. For checkpointed migrations the behaviour is
unchanged.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Shriram Rajagopalan <rshriram@cs.ubc.ca> (Remus bits)
Since there's no shared or static library to link against, this simply
re-uses the hypervisor side code. However, I only audited the code
added here for possible security issues, not the referenced code in
the hypervisor tree.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
And use it in xc_exchange_page(). This is basically because the
following change need something really similar to the set of
steps that are here abstracted in these two functions.
Despite of the change in the interface and in the signature of
some functions, this is pure code motion. No functional changes
involved.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The wrapper is there already, so better use it in place of
all the stuff required to issue a call to do_domctl() for
XEN_DOMCTL_getdomaininfo.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The wrapper is there already, so better use it in place of
all the stuff required to issue a call to do_domctl() for
XEN_DOMCTL_setvcpucontext.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As a wrapper to XEN_DOMCTL_get_address_size, and use it
wherever the call was being issued directly via do_domctl(),
saving quite some line of code.
Actually, the function returns the guest width in bytes,
rather than directly what XEN_DOMCTL_get_address_size provides
(which is a number of bits), since that is what it is useful
almost everywhere.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The switch-over logic from one page directory to the next was wrong;
it needs to be deferred until we actually reach the last page within
a given region, instead of being done when the last entry of a page
directory gets started with.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Discovered by Coverity,
CIDs 1054968 1054969 1054970 1054971 1054972 1054973 10549704
This was broken by c/s 5cc436c1d2 which did a blanket change of 'int
xc_handle' -> 'xc_interface *xch'. The types got updated, but error
conditions were left as-were. (I suspect some sed was involved originally)
Also while playing around in this area, fix up some of the bracketing style to
match the Xen coding style.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
There's no need for xl to output these messages on HVM domain creation
to stderr by default.
Change their loglevels from XTL_INFO to XTL_DETAIL; then the messages
output by xl are the same as those for PV domain creation. These
now-silenced messages can still be seen using verbose (-v) mode.
Signed-off-by: Matthew Daley <mattjd@gmail.com>
XSA-55 has exposed errors for guest creation on ARM:
- domain virt_base was not defined;
- xc_dom_alloc_segment allocates pfn from 0 instead of the RAM base address.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
If seg->pfn is too large, the arithmetic in the range check might
overflow, defeating the range check.
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
These functions take guest pfns and look them up in the p2m. They did
no range checking.
However, some callers, notably xc_dom_boot.c:setup_hypercall_page want
to pass untrusted guest-supplied value(s). It is most convenient to
detect this here and return INVALID_MFN.
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Tim Deegan <tim@xen.org>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Chuck Anderson <chuck.anderson@oracle.com>
v6: Check for underflow too (thanks to Andrew Cooper).
A sufficiently malformed input to libxc (such as a malformed input ELF
or other guest-controlled data) might cause one of libxc's malloc() to
fail. In this case we need to make sure we don't dereference or do
pointer arithmetic on the result.
Search for all occurrences of \b(m|c|re)alloc in libxc, and all
functions which call them, and add appropriate error checking where
missing.
This includes the functions xc_dom_malloc*, which now print a message
when they fail so that callers don't have to do so.
The function xc_cpuid_to_str wasn't provided with a sane return value
and has a pretty strange API, which now becomes a little stranger.
There are no in-tree callers.
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
v8: Move a check in xc_exchange_page to the previous patch
(ie, remove it from this patch).
v7: Add a missing check for a call to alloc_str.
Add arithmetic overflow check in xc_dom_malloc.
Coding style fix.
v6: Fix a missed call `pfn_err = calloc...' in xc_domain_restore.c.
Fix a missed call `new_pfn = xc_map_foreign_range...' in
xc_offline_page.c
v5: This patch is new in this version of the series.
The return values from xc_dom_*_to_ptr and xc_map_foreign_range are
sometimes dereferenced, or subjected to pointer arithmetic, without
checking whether the relevant function failed and returned NULL.
Add an appropriate error check at every call site.
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
v8: Add a missing check in xc_offline_page.c:xc_exchange_page,
which was in the next patch in v7 of the series.
Also improve the message.
I think in this particular error case it may be that the results
are a broken guest, but turning this from a possible host tools
crash into a guest problem seems to solve the potential security
problem.
v7: Simplify an error DOMPRINTF to not use "load ? : ".
Make DOMPRINTF allocation error messages consistent.
Do not set elf->dest_pages in xc_dom_load_elf_kernel
if xc_dom_seg_to_ptr_pages fails.
v5: This patch is new in this version of the series.
This is a simple binary image loader with its own metadata format.
However, it is too careless with image-supplied values.
Add the following checks:
* That the image is bigger than the metadata table; otherwise the
pointer arithmetic to calculate the metadata table location may
yield undefined and dangerous values.
* When clamping the end of the region to search, that we do not
calculate pointers beyond the end of the image. The C
specification does not permit this and compilers are becoming ever
more determined to miscompile code when they can "prove" various
falsehoods based on assertions from the C spec.
* That the supplied image is big enough for the text we are allegedly
copying from it. Otherwise we might have a read overrun and copy
the results (perhaps a lot of secret data) into the guest.
This is part of the fix to a security issue, XSA-55.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
v9: Use clearer code for calculating probe_end in find_table.
v6: Add a missing `return -EINVAL' (Matthew Daley).
Fix an error in the commit message (Matthew Daley).
v5: This patch is new in this version of the series.
Nathan Studer
Jean-Yves Migeon
Andrew Cooper
Ian Campbell
Mukesh Rathor
Roger Pau Monné
David Vrabel
Matthew Daley
Jan Beulich
Dario Faggioli
Vincent Bernardoff
Julien Grall
Ian Jackson