When xl is called to create a domU and there is not enough memory available,
then the autoballooning is called to extract memory from dom0. During the
ballooning a loop in libxl_wait_for_free_memory() waits unless enough memory
is available to create the domU.
But because of a variable-underflow the loop can finish too soon and xl
finally aborts with the message:
xc: error: panic: xc_dom_boot.c:161: xc_dom_boot_mem_init: can't allocate low memory for domain: Out of memory
libxl: error: libxl_dom.c:430:libxl__build_pv: xc_dom_boot_mem_init failed: Device or resource busy
libxl: error: libxl_create.c:901:domcreate_rebuild_done: cannot (re-)build domain: -3
The variable-underflow happens when freemem_slack is larger then
info.free_pages*4, because the solution of this operation is converted
implicit to a unsigned int to match the type of memory_kb.
Add a extra check for this condition to solve the problem.
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Constant MAX_PERMS 16 is too small to use in some occasions, e.g. if
there are more than 16 domU(s) on one hypervisor (it's easy to
achieve) and one wants to do xenstore-chmod PATH to all domU(s). So,
remove MAX_PERMS limitation and make it as arbitrary number of perms.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The way it was coded, it clobbered %rdx without telling the compiler.
This generally didn't cause any problems except when there are two back
to back invocations (as in plt_overflow()), as in that case the
compiler may validly assume that it can re-use for the second instance
the value loaded into %rdx before the first one.
Once at it, also properly relax the second operand of "mul" (there's no
need for it to be in %rdx, or a register at all), and switch away from
using explicit register names in the instruction operands.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
In changeset 19990:38dd208e1d95 a new parameter 'env' was added to
xPopen3, but no code was added to actually pass the environment down to
execvpe. Also, the new code was unreachable.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
- Use a compile-time-constant check for whether we can safely flush
just one cacheline. This reduces the common case from 28
instructions to three.
- Pass an object to the macro, not a pointer, so we can detect
attempts to flush arrays.
- Decode CCSIDR correctly to get cacheline size.
- Remove some redundant DSBs at the call sites.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
libxl_cpupool_list() enumerates the cpupools by "probing": calling
cpupool_info, starting at 0 and stopping when it gets an error. However,
cpupool_info will print an error when the call to xc_cpupool_getinfo() fails,
resulting in every xl command that uses libxl_list_cpupool (such as
cpupool-list) printing that error message spuriously.
Since at the moment the times we want to print the message correspond
with the use of the existing "exact" parameter, use it to decide
whether to print the message or not.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
HPET_TN_FSB is not really suitable for masking interrupts - it merely
switches between the two delivery methods. The right way of masking is
through the HPET_TN_ENABLE bit (which really is an interrupt enable,
not a counter enable or some such). This is even more so with certain
chip sets not even allowing HPET_TN_FSB to be cleared on some of the
channels.
Further, all the setup of the channel should happen before actually
enabling the interrupt, which requires splitting legacy and FSB logic.
Finally this also fixes an S3 resume problem (HPET_TN_FSB did not get
set in hpet_broadcast_resume(), and hpet_msi_unmask() doesn't get
called from the general resume code either afaict).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
- printing file name and line number here is pointless
- they are guest related, so should get their log level filter
accordingly
- include segment numbers and canonicalize number widths
Signed-off-by: Jan Beulich <jbeulich@suse.com>
This was removed by 26167:31dcc0e08754 "xend: Remove old vtpm support
from xm" but at least one caller was left. Reinstate with
s/TPM/device/ since it appears that this functionality could apply
elsewhere.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Using pci_find_next_cap() without prior pci_find_cap_offset() is bogus
(and possibly wrong, given that the latter doesn't check the
PCI_STATUS_CAP_LIST flag, which so far was checked in an open-coded way
only for the non-bridge case).
Once at it, fold the two calls into one, as we need its result in any
case.
Question is whether, without any caller left, pci_find_next_cap()
should be purged as well.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Xiantao Zhang <xiantao.zhang@intel.com>
The biggest subtlety here is there additional argument when op ==
SCHEDOP_shutdown and reason == SHUTDOWN_suspend and its interpretation by
xc_domain_{save,restore}. Add some clarifying comments to libxc as well.
This patch moves some structs around but there is no functional change
other than improved documentation.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch updates extras/mini-os/COPYING to explain
which optional features are GPL and what the implications
of enabling them are.
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
- invalidate tlb after setting WXN
- flush D-cache and I-cache after relocation;
- invalidate D-cache after writing to smp_up_cpu;
- flush I-cache after changing HTTBR;
- flush I-cache and branch predictor after writing Xen text ptes.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Remove a definition not belonging into the interface, and correct a
few typos in comments.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
This patch enables hpet msi remapping for amd iommu.
Signed-off-by: Wei Wang <wei.wang2@amd.com>
- use the existing ACPI_IVHD_* #define-s
- warn on finding more than one IVHD HPET entry
- consolidate parameters of update_intremap_entry_from_msi_msg()
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Committed-by: Jan Beulich <jbeulich@suse.com>
Secondary cpus are held by the firmware until we send an IPI to them.
Reordered non-boot cpu wait loop to perform the check before waiting
for an event, to handled the case where the event has already
happened when we reach the loop.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
"Enables the processor to receive instruction cache, BTB, and TLB maintenance
operations from other processors"
...
"You must set this bit before enabling the caches and MMU, or
performing any cache and TLB maintenance operations. The only time
you must clear this bit is during a processor power-down sequence"
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
When deregistering a timeout, the address of application data was
being passed to the timeout_deregister hook instead of the data
itself.
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
It seems that all current callers have interrupts enabled, making the
code currently safe but dangerous. Also, fix a trailing whitespace
issue.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
There have been some "organizational changes" within AMD.
Update the MAINTAINERS file accordingly.
Please also feel free to use the new email addresses if there are
any inquires related to code authored by Wei Wang, Christoph Egger
or Andre Przywara.
Signed-off-by: Andre Przywara <osp@andrep.de>
Acked-by: Wei Wang <weiwang.dd@gmail.com>
Acked-by: Boris Ostrovsky <boris.ostrovsky@amd.com>
Acked-by: Wei Huang <wei.huang2@amd.com>
Acked-by: Christoph Egger <Christoph_Egger@gmx.de>
Committed-by: Keir Fraser <keir@xen.org>
c/s 20281:95ea2052b41b, which introduces Grant Table version 2
hypercalls introduces a vulnerability whereby the compat hypercall
handler can fall into an infinite loop.
If the watchdog is enabled, Xen will die after the timeout.
This is a security problem, XSA-24 / CVE-2012-4539.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If the guest has not fully populated its top-level PAE entries when it calls
HVMOP_pagetable_dying, the shadow code could try to unhook entries from
MFN 0. Add a check to avoid that case.
This issue was introduced by c/s 21239:b9d2db109cf5.
This is a security problem, XSA-23 / CVE-2012-4538.
Signed-off-by: Tim Deegan <tim@xen.org>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In certain conditions, such as low memory, set_p2m_entry() can fail.
Currently, the p2m and m2p tables will get out of sync because we still
update the m2p table after the p2m update has failed.
If that happens, subsequent guest-invoked memory operations can cause
BUG()s and ASSERT()s to kill Xen.
This is fixed by only updating the m2p table iff the p2m was
successfully updated.
This is a security problem, XSA-22 / CVE-2012-4537.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The timer action for a vcpu periodic timer is to calculate the next
expiry time, and to reinsert itself into the timer queue. If the
deadline ends up in the past, Xen never leaves __do_softirq(). The
affected PCPU will stay in an infinite loop until Xen is killed by the
watchdog (if enabled).
This is a security problem, XSA-20 / CVE-2012-4535.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The program xen-tmem-list-parse parses the output of xm/xl tmem-list
into human-readable format. A missing NULL terminator sometimes
causes garbage to be spewed where the two-letter pool type
should be output.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
The claim_lock() function would fail in the perl code with:
Invalid argument at -e line 2.
because the Perl snippet opens for reading the file descriptor, which
was earlier opened for write (append).
Signed-off-by: Jacek Konieczny <jajcus@jajcus.net>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
When a config-file for a pv-domU has a vfb section with a vnc=0
option then a "xl create" for that domU crashes with the message
xl: libxl.c:252: libxl_defbool_val: Assertion `!libxl_defbool_is_default(db)'
failed.
and the domU hangs early in the start.
This patch fixes the cause of the assertion and let the domU start
normally.
This problem exists since xen 4.2.
Signed-off-by: Ronny Hegewald <Ronny.Hegewald@online.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
This patch adds vtpm support to libxl. It adds vtpm parsing to config
files and 3 new xl commands:
vtpm-attach
vtpm-detach
vtpm-list
Signed-off-by: Matthew Fioravante <matthew.fioravante@jhuapl.edu>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Ian Campbell
Stefano Stabellini
Ronny Hegewald
Chunyan Liu
Jan Beulich
Olaf Hering
Tim Deegan
George Dunlap
Matthew Fioravante
Wei Wang
Jim Fehlig
Andrew Cooper
Andre Przywara
Ian Jackson
Dan Magenheimer
Jacek Konieczny