- Made the non-present flush testing a bit simpler.
- Removed dma_addr_level_page_maddr(). Use a modified
addr_to_dma_page_maddr() instead.
- Upon mapping new context entry: flush old entry using domid 0 and
always flush iotlb.
Signed-off-by: Espen Skoglund <espen.skoglund@netronome.com>
Domctl interface is extended to allow libxc retrieve device group
information from hypervisor. Vendor-specific iommu_ops is also
extended by adding a new operation "get_device_group_id()", which is
currently a null pointer but could be implemented later for vt-d.
Error will be raised from tools side when user trying to assign PCI
device with a sibling device being driven by dom0. User will keep
being prompted until he has hidden the entire device group (at least,
the sibling devices driven by dom0) in dom0 kernel
parameter. Hopefully this framework could be flexible enough to
support both amd iommu and vt-d.
The following 2 cases are not covered by this patch, but should be
easy to handle.
* Checking for hot-plug devices (maybe we can delay calling
ImageHandler.signalDeviceModel() until all checks are done?)
* Checking for splitted device group between different passthru
domains
Signed-off-by: Wei Wang <wei.wang2@amd.com>
On map: only flush when old PTE was valid or invalid PTE may be
cached.
On unmap: always flush old entry, but skip flush for unaffected
IOMMUs.
Signed-off-by: Espen Skoglund <espen.skoglund@netronome.com>
into stubdom/ as possible. That also permits to build all of
ioemu, c and caml stubdoms at the same time.
Signed-off-by: Samuel Thibault <samuel.thibault@eu.citrix.com>
This patch fix xend as when fatal error happened (e.g. qemu-dm process
was killed) log error message then mark that domain as crashed, do
what specified on crashed in the domain config file. Added some code in
xend to check those crashed hvm DM status each 30 seconds.
Signed-off-by: Xiaowei Hu <xiaowei.hu@oracle.com>
When I changed the name of a domain by using xm rename command, the
name of the domain that xentop shows did not change. This patch
reflects new domain name to the name of domains that xentop shows.
Signed-off-by: Masaki Kanno <kanno.masaki@jp.fujitsu.com>
This patch removes the following warnings on ia64 by
including necessary header files.
On x86 the necessary files are included by recusive inclusion.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
This patch removes unused resource parameter and fixes the default
value for domain_migrate. Also removes tab indent in XendOptions.py.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
When a domain's VT-d table is changed, only the iommus under which the
domain has assigned devices need to be flushed.
Signed-off-by: Yang, Xiaowei <xiaowei.yang@intel.com>
This a step forward to fix the security hole introduced by dom0's 1:1
mapping VT-d table: remove the critical code and data from it. The
more flexible solution is to update dom0's VT-d table on demand as what
will be done for other PV domains. However, there could bring a
performance issue even with software optimization. Iotlb flush of some
hardware is time-consuming.
Signed-off-by: Yang, Xiaowei <xiaowei.yang@intel.com>
Added more informative error codes for device assignment domctls.
Introduced python bindings for device assignment and enable xend to
also perform IOMMU device assignment when assigning PCI devices.
Signed-off-by: Espen Skoglund <espen.skoglund@netronome.com>
Perform IOMMU map/unmap when (a) frame type changes, (b) memory
reservation changes, and (c) a grant reference is newly mapped or
completely unmapped from a domain.
Signed-off-by: Espen Skoglund <espen.skoglund@netronome.com>
Introduce 'iommu_pv' boot parameter (default off). Added a need_iommu
flag which is set if guest has PCI devices assigned. IOMMU page
tables are populated with current guest memory when IOMMU is first
enabled for the guest.
Signed-off-by: Espen Skoglund <espen.skoglund@netronome.com>
Mapping should be removed from current domain's p2m table when doing a
grant table transfer.
Signed-off-by: Espen Skoglund <espen.skoglund@netronome.com>
Move hvm platform timers from underlying physical CPU TSC to Xen
system time and ensure domain-wide monotonicity. TSC on many systems
may skew between processors leading to 'time going backwards' messages
from some guests.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
F10 to select boot device. This will be rarely used, and it is
possible to hit F10 before the message is displayed and the keypress
will still register. So in practice it is quite possibel to use this
boot feature reliably without needing a multi-second delay.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
In xen/arch/x86/cpu/amd.c the function disable_c1_ramping iterates
over the northbridges using NR_CPUS as an upper bound for the number of
nodes. If there are no more northbridges found, it stops iterating.
Sadly it just adds the northbridge number to 0x18 and uses this as a
PCI device number, so probing the 9th northbridge on an 8 node system will
be caught by the newly inserted assertion in pci_conf_read in current
unstable. We fix this by first querying the number of nodes from the
first northbridge to avoid the overflow.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Verified by Mark.Johnson@sun.com
This patch adds -s --ssl option to xm migrate. It will override
xend-relocation-ssl setting in /etc/xen/xend-config.sxp.
When mix deploy xen 3.2 and xen 3.3 servers, it's convenient to have a
command line option rather than modify /etc/xen/xend-config.sxp every
time.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
This patch makes ssl relocation server listen on 8003 if enabled.
Whether to start ssl relocation server now controlled by
xend-relocation-ssl-server. So ssl and non-ssl relocation server can
run simultaneously. You can also only start ssl server or only start
non-ssl relocation server.
When mix deploy xen 3.2 server (has no ssl support) and 3.3 servers,
start ssl and non-ssl relocation server simultaneously can keep
backward compatibility.
It's also more reasonable to have separate ports for ssl and non-ssl.
In this patch, also renames xend-relocation-tls to xend-relocation-ssl.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
acpi_sleep_info is changed but some of the code in Xen is not
synchronized up with this change, which causes Xen S3 failure.
Signed-off-by: Shane Wang <shane.wang@intel.com>
The contents of these two files are duplicate of xend-config.sxp and
xm-config.xml. They only add maintaining burdens to developers.
This patch removes them permanently.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
The automatic NUMA placement code (find_relaxed_node) in
XendDomainInfo.py contains several bugs:
1. The domain just created shall not be considered in the load
calculation.
2. Nodes with too less memory for the domain must be considered during
the load calculation phase and abandoned later, currently these nodes
win with a load of 0.
3. CPUs which are offline shall not be considered in load calculation.
4. (Integer-)Dividing the load value by the number of cores per node
may conceal subtle load differences resulting in a non-optimal node to
be chosen.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Keir Fraser