Use the generic xen/linkage.h macros to annotate code symbols
and add missing annotations.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Use the generic xen/linkage.h macros to annotate code symbols
and add missing annotations.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
When the revision in hardware is newer than anything Xen has to hand,
'microcode_cache' isn't set up. Then, `xen-ucode` initiates the update
because it doesn't know whether the revisions across the system are symmetric
or not. This involves the patch getting all the way into the
apply_microcode() hooks before being found to be too old.
This is all a giant mess and needs an overhaul, but in the short term simply
adjust the apply_microcode() to return -EEXIST.
Also, unconditionally print the preexisting microcode revision on boot. It's
relevant information which is otherwise unavailable if Xen doesn't find new
microcode to use.
Fixes: 648db37a15 ("x86/ucode: Distinguish "ucode already up to date"")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Move altp2m code from generic p2m.c file to altp2m.c, so it is kept separately
and can possibly be disabled in the build. We may want to disable it when
building for specific platform only, that doesn't support alternate p2m.
No functional change intended.
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Guard calls to CPU-specific mcheck init routines in common MCE code
using new INTEL/AMD config options.
The purpose is not to build platform-specific mcheck code and calls to it,
if this platform is disabled in config.
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add build-time checks for newly introduced INTEL/AMD config options when
calling vmce_{intel/amd}_{rdmsr/wrmsr}() routines.
This way a platform-specific code can be omitted in vmce code, if this
platform is disabled in config.
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Build AMD vPMU when CONFIG_AMD is on, and Intel vPMU when CONFIG_INTEL
is on respectively, allowing for a plaftorm-specific build.
No functional change intended.
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The mentioned macros exist only because of Linux compatible purpose.
The patch defines __ffs() in terms of Xen bitops and it is safe
to define in this way ( as __ffs() - 1 ) as considering that __ffs()
was defined as __builtin_ctzl(x), which has undefined behavior when x=0,
so it is assumed that such cases are not encountered in the current code.
To not include <xen/linux-compat.h> to Xen library files __ffs() and __ffz()
were defined locally in find-next-bit.c.
Except __ffs() usage in find-next-bit.c only one usage of __ffs() leave
in smmu-v3.c. It seems that it __ffs can be changed to ffsl(x)-1 in
this file, but to keep smmu-v3.c looks close to linux it was deciced just
to define __ffs() in xen/linux-compat.h and include it in smmu-v3.c
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Rahul Singh <rahul.singh@arm.com>
... in order to also deny Dom0 access through the alias ports (commonly
observed on Intel chipsets). Without this it is only giving the
impression of denying access to both PICs. Unlike for CMOS/RTC, do
detection very early, to avoid disturbing normal operation later on.
Like for CMOS/RTC a fundamental assumption of the probing is that reads
from the probed alias port won't have side effects in case it does not
alias the respective PIC's one.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
By default there's already no use for this when we run in shim mode.
Plus there may also be a need to suppress the probing in case of issues
with it. Before introducing further port alias probing, introduce a
command line option allowing to bypass it, default it to on when in shim
mode, and gate RTC/CMOS port alias probing on it.
Requested-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
The count_args_ macro violates Rule 20.7, but it can't be made
compliant with Rule 20.7 without breaking its functionality. Since
it's very unlikely for this macro to be misused, it is deviated.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
These rules are concerned with the use of facilities provided by the
C Standard Library (qsort, bsearch for rule 21.9, and those provided
by <time.h> for rule 21.10).
Xen provides in its source code its own implementation of some of these
functions and macros, therefore a justification is provided for allowing
uses of these functions in the project.
The rules are also marked as clean as a consequence.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
There's no point in forcing a system wide update of the MTRRs on all processors
when there are no changes to be propagated. On AP startup it's only the AP
that needs to write the system wide MTRR values in order to match the rest of
the already online CPUs.
We have occasionally seen the watchdog trigger during `xen-hptool cpu-online`
in one Intel Cascade Lake box with 448 CPUs due to the re-setting of the MTRRs
on all the CPUs in the system.
While there adjust the comment to clarify why the system-wide resetting of the
MTRR registers is not needed for the purposes of mtrr_ap_init().
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Update parse_nic_config() to support a new `vlan' keyword. This
keyword specifies the VLAN configuration to assign to the VIF when
attaching it to the bridge port, on operating systems that support
the capability (e.g. Linux). The vlan keyword will allow one or
more VLANs to be configured on the VIF when adding it to the bridge
port. This will be done by the vif-bridge script and functions.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Add `vlan' string field to libxl_device_nic, to allow a VLAN
configuration to be specified for the VIF when adding it to the
bridge device.
Update libxl_nic.c to read and write the vlan field from the
xenstore.
This provides the capability for supported operating systems (e.g.
Linux) to perform VLAN filtering on bridge ports. The Xen
hotplug scripts need to be updated to read this information from
the xenstore and perform the required configuration.
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
In compare_cpu_pct(), there is a double -> unsigned long long converion when
calling compare(). In C, this discards the fractional part, resulting in an
out-of order sorting such as:
NAME STATE CPU(sec) CPU(%)
xendd --b--- 4020 5.7
icecream --b--- 2600 3.8
Domain-0 -----r 1060 1.5
neon --b--- 827 1.1
cheese --b--- 225 0.7
pizza --b--- 359 0.5
cassini --b--- 490 0.4
fusilli --b--- 159 0.2
bob --b--- 502 0.2
blender --b--- 121 0.2
bread --b--- 69 0.1
chickpea --b--- 67 0.1
lentil --b--- 67 0.1
Introduce compare_dbl() function and update compare_cpu_pct() to call it.
Fixes: 49839b535b ("Add xenstat framework.")
Signed-off-by: Leigh Brown <leigh@solinno.co.uk>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Now that we're using hypercalls to start APs, we can replace the 'ap_cpuid'
global with a regular function parameter. This requires telling the compiler
that we'd like the parameter in a register rather than on the stack.
While adjusting, rename to cpu_setup(). It's always been used on the BSP,
making the name ap_start() specifically misleading.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Various functions have a parameter or local variable called cpuid, but this
triggers a MISRA R5.3 violation because we also have a function called cpuid()
which wraps the real CPUID instruction.
In all these cases, it's a Xen cpu index, which is far more commonly named
just cpu in our code.
While adjusting these, fix a couple of other issues:
* cpufreq_cpu_init() is on the end of a hypercall (with in-memory parameters,
even), making EFAULT the wrong error to use. Use EOPNOTSUPP instead.
* check_est_cpu() is wrong to tie EIST to just Intel, and nowhere else using
EIST makes this restriction. Just check the feature itself, which is more
succinctly done after being folded into its single caller.
* In powernow_cpufreq_update(), replace an opencoded cpu_online().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The function itself properly handles and hands onwards failure from
create_perdomain_mapping(). Therefore its caller should respect possible
failure, too.
Fixes: 4b28bf6ae9 ("x86: re-introduce map_domain_page() et al")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
The commit makes a claim without justification.
The claim is false; it broke lsevtchn in dom0, a debugging utility which
absolutely does care about all of the domain's event channels.
Whether to return information about a xen-owned evtchn is a matter of policy,
and it's not acceptable to subvert Xen's security subsystem on the decision.
This reverts commit f60ab5337f.
Fixes: f60ab5337f ("evtchn: refuse EVTCHNOP_status for Xen-bound event channels")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Assigning a variable to itself is an anti-pattern. It introduces definite UB
in an attempt to silence a warning about possible UB.
As it's definite undefined behaviour, it also mis-compiles in simple cases,
using whatever stale value happened to be in the allocated register.
Clang includes -Wuninitialized within -Wall, but GCC only includes it in
-Wextra, which is not used by Xen at this time.
Furthermore, the specific pattern of assigning a variable to itself in its
declaration is only diagnosed by GCC with -Winit-self. Clang does diagnose
simple forms of this pattern with a plain -Wuninitialized, but it fails to
diagnose the instances in Xen that GCC manages to find.
GCC, with -Wuninitialized and -Winit-self notices:
arch/x86/time.c: In function ‘read_pt_and_tsc’:
arch/x86/time.c:297:14: error: ‘best’ is used uninitialized in this function [-Werror=uninitialized]
297 | uint32_t best = best;
| ^~~~
arch/x86/time.c: In function ‘read_pt_and_tmcct’:
arch/x86/time.c:1022:14: error: ‘best’ is used uninitialized in this function [-Werror=uninitialized]
1022 | uint64_t best = best;
| ^~~~
Fix these up to start with a value of ~0, which is also more robust in the
case that something goes wrong.
Fixes: 23658e8232 ("x86/time: further improve TSC / CPU freq calibration accuracy")
Fixes: 3f3906b462 ("x86/APIC: calibrate against platform timer when possible")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This option is new in GCC-14, and maps to MISRA Rule 1.1. The codebase is
clean to it, and Eclair is blocking.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Tag the rule as clean, as there are no more violations in the codebase since
93c27d54dd ("xen/arm: Fix MISRA regression on R1.1,
flexible array member not at the end").
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
If xenstored runs out of memory it is possible for it to fail operations
that should succeed. libxl wasn't robust against this, and could fail
to ensure that the TTY path of a non-initial console was created and
read-only for guests. This doesn't qualify for an XSA because guests
should not be able to run xenstored out of memory, but it still needs to
be fixed.
Add the missing error checks to ensure that all errors are properly
handled and that at no point can a guest make the TTY path of its
frontend directory writable.
Signed-off-by: Demi Marie Obenour <demi@invisiblethingslab.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Some devices (notably Intel Wifi 6 AX210 card) keep auxiliary registers
on the same page as MSI-X table. Device model (especially one in
stubdomain) cannot really handle those, as direct writes to that page is
refused (page is on the mmio_ro_ranges list). Instead, extend
msixtbl_mmio_ops to handle such accesses too.
Doing this, requires correlating read/write location with guest
MSI-X table address. Since QEMU doesn't map MSI-X table to the guest,
it requires msixtbl_entry->gtable, which is HVM-only. Similar feature
for PV would need to be done separately.
This will be also used to read Pending Bit Array, if it lives on the same
page, making QEMU not needing /dev/mem access at all (especially helpful
with lockdown enabled in dom0). If PBA lives on another page, QEMU will
map it to the guest directly.
If PBA lives on the same page, discard writes and log a message.
Technically, writes outside of PBA could be allowed, but at this moment
the precise location of PBA isn't saved, and also no known device abuses
the spec in this way (at least yet).
To access those registers, msixtbl_mmio_ops need the relevant page
mapped. MSI handling already has infrastructure for that, using fixmap,
so try to map first/last page of the MSI-X table (if necessary) and save
their fixmap indexes. Note that msix_get_fixmap() does reference
counting and reuses existing mapping, so just call it directly, even if
the page was mapped before. Also, it uses a specific range of fixmap
indexes which doesn't include 0, so use 0 as default ("not mapped")
value - which simplifies code a bit.
Based on assumption that all MSI-X page accesses are handled by Xen, do
not forward adjacent accesses to other hypothetical ioreq servers, even
if the access wasn't handled for some reason (failure to map pages etc).
Relevant places log a message about that already.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The arch_msix struct had a single "warned" field with a domid for which
warning was issued. Upcoming patch will need similar mechanism for few
more warnings, so change it to save a bit field of issued warnings.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
libxl passes some information to libacpi to create the ACPI table for a PVH
guest, and among that information it's a bitmap of which vCPUs are online
which can be less than the maximum number of vCPUs assigned to the domain.
While the population of the bitmap is done correctly for HVM based on the
number of online vCPUs, for PVH the population of the bitmap is done based on
the number of maximum vCPUs allowed. This leads to all local APIC entries in
the MADT being set as enabled, which contradicts the data in xenstore if vCPUs
is different than maximum vCPUs.
Fix by copying the internal libxl bitmap that's populated based on the vCPUs
parameter.
Reported-by: Arthur Borsboom <arthurborsboom@gmail.com>
Link: https://gitlab.com/libvirt/libvirt/-/issues/399
Reported-by: Leigh Brown <leigh@solinno.co.uk>
Fixes: 14c0d328da ('libxl/acpi: Build ACPI tables for HVMlite guests')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Leigh Brown <leigh@solinno.co.uk>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With lock handling now allowing up to 16384 cpus (spinlocks can handle
65535 cpus, rwlocks can handle 16384 cpus), raise the allowed limit for
the number of cpus to be configured to 16383.
The new limit is imposed by IOMMU_CMD_BUFFER_MAX_ENTRIES and
QINVAL_MAX_ENTRY_NR required to be larger than 2 * CONFIG_NR_CPUS.
Add a support limit of physical CPUs to SUPPORT.md (4096 on x86, 128
on ARM).
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
To improve clarity and ease of navigation do not show reports related
to adopted code in the scheduled analysis.
Configuration options are commented out because they may be useful
in the future.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Adjust ECLAIR configuration for rules: R21.14, R21.15, R21.16 by taking
into account mem* macros defined in the Xen sources as if they were
equivalent to the ones in Standard Library.
Signed-off-by: Alessandro Zucchelli <alessandro.zucchelli@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Commit 2209c1e35b ("xen/arm: Introduce a generic way to access memory
bank structures") introduced a MISRA regression for Rule 1.1 because a
flexible array member is introduced in the middle of a struct, furthermore
this is using a GCC extension that is going to be deprecated in GCC 14 and
a warning to identify such cases will be present
(-Wflex-array-member-not-at-end) to identify such cases.
In order to fix this issue, use the macro __struct_group to create a
structure 'struct membanks_hdr' which will hold the common data among
structures using the 'struct membanks' interface.
Modify the 'struct shared_meminfo' and 'struct meminfo' to use this new
structure, effectively removing the flexible array member from the middle
of the structure and modify the code accessing the .common field to use
the macro container_of to maintain the functionality of the interface.
Given this change, container_of needs to be supplied with a type and so
the macro 'kernel_info_get_mem' inside arm/include/asm/kernel.h can't be
an option since it uses const and non-const types for struct membanks, so
introduce two static inline, one of which will keep the const qualifier.
Given the complexity of the interface, which carries a lot of benefit but
on the other hand could be prone to developer confusion if the access is
open-coded, introduce two static inline helper for the
'struct kernel_info' .shm_mem member and get rid the open-coding
shm_mem.common access.
Fixes: 2209c1e35b ("xen/arm: Introduce a generic way to access memory bank structures")
Reported-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Import __struct_group from Linux, commit 50d7bd38c3aa
("stddef: Introduce struct_group() helper macro"), in order to
allow the access through the anonymous structure to the members
without having to write also the name, e.g:
struct foo {
int one;
struct {
int two;
int three, four;
} thing;
int five;
};
would become:
struct foo {
int one;
__struct_group(/* None */, thing, /* None */,
int two;
int three, four;
);
int five;
};
Allowing the users of this structure to access the .thing members by
using .two/.three/.four on the struct foo.
This construct will become useful in order to have some generalized
interfaces that shares some common members.
Origin: git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git 50d7bd38c3aa
Reported-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The expression get more complicated when ->mod_end isn't being abused as a
size field. Introduce and use a initrd_len local variable.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
modules_headroom is a misleading name as it applies strictly to mod[0] only,
and the movement loop is deeply unintuitive and completely undocumented.
Provide help to whomever needs to look at this code next.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@gmail.com>
The xen sources contain violations of MISRA C:2012 Rule 14.4 whose
headline states:
"The controlling expression of an if statement and the controlling
expression of an iteration-statement shall have essentially Boolean type".
Add comparisons to avoid using enum constants as controlling expressions
to comply with Rule 14.4.
Amend the comment in the enum definition to reflect the fact that
boolean uses of iommu_intremap are no longer allowed.
No functional change.
Signed-off-by: Maria Celeste Cesario <maria.celeste.cesario@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Update ECLAIR configuration to take into account the deviations
agreed during MISRA meetings.
Amend an existing entry of Rule 14.4 in deviations-rst:
it is not a project-wide deviation.
Tag Rule 14.4 as clean for arm.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
MISRA C Rule 20.7 states: "Expressions resulting from the expansion
of macro parameters shall be enclosed in parentheses". Therefore, some
macro definitions should gain additional parentheses to ensure that all
current and future users will be safe with respect to expansions that
can possibly alter the semantics of the passed-in macro parameter.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
MISRA C Rule 20.7 states: "Expressions resulting from the expansion
of macro parameters shall be enclosed in parentheses". Therefore, some
macro definitions should gain additional parentheses to ensure that all
current and future users will be safe with respect to expansions that
can possibly alter the semantics of the passed-in macro parameter.
No functional change.
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
HVM_CPU_XSAVE_SIZE() may rewrite %xcr0 twice. Defer the calculation until
after we've decided to write out an XSAVE record.
Note in hvm_load_cpu_xsave_states() that there were versions of Xen which
wrote out a useless XSAVE record. This sadly limits out ability to tidy up
the existing infrastructure. Also leave a note in xstate_ctxt_size() that 0
still needs tolerating for now.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... in order to change how LAPIC_ID handling works. Importantly, this allows
us to start APs by vCPU ID in order to query the LAPIC_ID, rather than needing
to know the APIC_ID in order to wake them.
Other improvements avoid:
* The 16bit entry stub
* A LMSW insn, which has no decode assist on AMD and needs emulating fully
* 13 vLAPIC emulations when 3 hypercalls can do
* 4 pages of stack when 1 in plenty
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The IO port, MSR, IO-APIC and LAPIC accessors compile typically to single or
pairs of instructions, which is less overhead than even the stack manipulation
to call the helpers.
Move the implementations from util.c to being static inlines in util.h
In addition, turn ioapic_base_address into a constant as it is never modified
from 0xfec00000 (substantially shrinks the IO-APIC logic), and make use of the
"A" constraint for WRMSR/RDMSR like we already do for RDTSC.
Bloat-o-meter reports a net:
add/remove: 0/13 grow/shrink: 0/18 up/down: 0/-790 (-790)
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Move the crc and its state into struct gunzip_state. In the process, expand
the only use of CRC_VALUE as it is hides what is being compared.
Furthermore, all variables here should be uint32_t rather than unsigned long,
which halves the storage space required. Filter the typechanges through the
logic.
Adjust the logic to hold crc in a positive form, and negate it for update in
flush_window(). This is the more normal way to write CRC algorithms, and
avoids weird-to-follow logic in gunzip().
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Move the input buffer handling, buffer pointer(inbuf), size(insize), and
index(inptr), into gunzip_state. Adjust functions and macros that consumed the
input buffer to accept a struct gunzip_state reference.
Convert get_byte() into a real function and subsume fill_inbuf(). Fix the
failure path to work correctly when error() stops being a plain panic().
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Move the window position, outcnt/wp, into struct gunzip_state. This removes
'outcnt' and it's alias 'wp'.
Consistently use the term "position" which is better than "pointer" given that
this is is a plain integer field.
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Edgar E. Iglesias