Per VT-d spec, software should submit only one "incremental" command
at a time to Global Command reigster. Current implementation uses a
variable (gcmd) to record the state of Global Status register. It's
error prone.
Signed-off-by: Weidong Han <weidong.han@intel.com>
When set some registers of VT-d, it must wait for hardware
completion. There are lots of duplicated code to do that. This patch
defines a macro for it, thus it is much cleaner.
Signed-off-by: Weidong Han <weidong.han@intel.com>
This patch removes global variable "vtd_enabled", which is
redundant. "iommu_enabled" is enough. And also removes useless global
variables qi_ctrl and ir_ctrl, which are not used at all.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Currently HAP systems suffer a significant performance loss when a vnc
client is connect or the sdl interface is used, because HAP is lacking
an implementation of track_dirty_vram.
As a consequence qemu always tries to update the whole screen because
it does not know which areas of the screen have been updated by the
guest.
This patch implements track_dirty_vram for HAP enabling the logdirty
mechanism only in a specific gfn range and adding a
paging_log_dirty_range function that returns the log dirty bitmap in a
requested range.
Paging_log_dirty_range is different from paging_log_dirty_op because
operates on a range and also because it does not pause the domain. In
order not to lose any update I moved clean_dirty_bitmap at the
beginning of the function before evaluating the logdirty bitmap.
The bitmap is still safe because it is protected by the logdirty lock.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
On some hosts:
[root@localhost ~]# ls /sys/bus/pci/devices/0000:00:05.0/
0000:00:05.0:pcie00 0000:05:00.0 class driver local_cpus
resource subsystem_vendor
0000:00:05.0:pcie01 broken_parity_status config enable modalias
subsystem uevent
0000:00:05.0:pcie02 bus device irq power
subsystem_device vendor
Here we should only get 0000:05:00.0, but we also get 0000:00:05.0
unexpectedly. With this patch, xend only extracts the exact BDF(s).
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
As observed by Mick Joran, if short-lived domain exits cleanly
then os.waitpid() will throw the following exception. This appears
to be because the child process that is used to start the domain
has detached from its parent.
OSError: [Errno 10] No child processes
Cc: Mick Jordan <Mick.Jordan@sun.com>
Signed-off-by: Simon Horman <horms@verge.ent.au>
sub make in tools/blktap2/daemon/lib and tools/lvd/lib
can be triggered many times at the same time which results in
weired link error because one target is linking a library while
another target is trying to recreate the library.
This patch makes it invoke submake only once.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
Other than being arguably more human readable,
this patch reconciles the output differences between
using Xen API and xmlrpc to manipulate domains.
Signed-off-by: Simon Horman <horms@verge.net.au>
Using func for hotplug_slot is not correct, although func is often
zero, previously zero meant please pick a vslot and asking xend to
pick a vslot was the only method available.
This resolves the following error when using Xen API:
$ xm create hvm.conf
...
Internal error: Timed out waiting for device model action.
Signed-off-by: Simon Horman <horms@verge.net.au>
xm uses the following code to read pci information using Xen API:
ppci_ref =3D server.xenapi.DPCI.get_PPCI(dpci_ref)
ppci_record =3D server.xenapi.PPCI.get_record(ppci_ref)
dev =3D {
"domain": int(ppci_record["domain"]),
"bus": int(ppci_record["bus"]),
"slot": int(ppci_record["slot"]),
"func": int(ppci_record["func"]),
"vslot": int(server.xenapi.DPCI.get_hotplug_slot(dpci_ref))
}
As the domain, bus, slot and func values are returned as string
representations of decimal, it makes sense for get_hotplug_slot() to
also return string representations of decimal.
As it is, the int() conversion will break cause xm to fail with
an error if the vslot is in the range 0xa-0xf or 0x1a-0x1f.
$ xm pci-list debian
Error: Invalid argument.
And the int() conversion will return the wrong value if
the vslot is in the range 0x10-0x19.
This patch also alters XendDPCI to store hotplug_vslot as an integer
rather than a string. This is consitent with the way other
values are stored inside XendDPCI.
get_hotplug_slot() returning a string is not consistent
with other calls inside XendDPCI, which return integers.
Signed-off-by: Simon Horman <horms@verge.net.au>
I don't know of the historical reasons for this, but by convention
hex values are stored without a leading '0x' in the backend and
with a leading '0x' in the device configuration.
This patch also removes handling of the case where vslot is missing
from the backend, should never occur.
Signed-off-by: Simon Horman <horms@verge.net.au>
Internally xend doesn't know how to handle empty opts.
This code ensures that opts is only included in the sxpr
if its value will be non-empty.
Signed-off-by: Simon Horman <horms@verge.net.au>
* Install create.dtd in SHAREDIR
* Use SHAREDIR/create.dtd
* import os.path.join into xenapi_create.py,
it already seems to be used many times
Resolves the following error when using XenAPI:
$ xm create hvm.conf
Couldn't open resource '/usr/share/xen/create.dtd' at
/usr/share/xen/create.dtd:1:0
Signed-off-by: Simon Horman <horms@verge.net.au>
On ia64, xen-unstable 19698:f72d26c00002 cannot be built:
../../tools/libxc/libxenguest.so: undefined reference to
`xc_core_arch_map_p2m_writable'
../../tools/libxc/libxenguest.so: undefined reference to `xc_map_m2p'
Because xc_offline_page.c requires xc_map_m2p() in xc_domain_save.c,
xc_offline_page.c must be compiled only if CONFIG_MIGRATE=3Dy.
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Originally, it calls xmalloc to set index in
ioapic_rte_to_remap_entry(). When make with debug=y, it may trigger
spinlock BUG_ON because allocate memory with interrupt disabled.
Signed-off-by: Weidong Han <weidong.han@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Empty QCOW images consist of only the L1 table, this results in a
file size which is not sector-aligned. Since blktap uses O_DIRECT, the
block aligned read of the L1 table will go beyond the end of file and
thus returns the actual file size and not the expected length.
This patch checks whether at least the L1 table has been read.
This should fix bug 1430.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
As pointed out in Xen Bugzilla 1430 in the blktap QCOW driver the
rounding function is wrong in line 824 of block-qcow.c.
This patch replaces this (and other roundings) with the already
existing ROUNDUP macro (and fixes the usual macro pitfall).
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
This patch fixes the "file object has no attribute find" failure
we've been seeing when starting blktap2 devices and adds more
meaningful error output to conditions where the tapdisk2 process is
unable to create a blktap2 device.
Signed-off-by: Dutch Meyer <dmeyer@cs.ubc.ca>
Implement xenbus_wait_for_state_change and xenbus_switch_state and
change the various frontends to use the two functions and do proper
error checking.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
1) fix some small typos in util/pci.py;
2) find_all_the_multi_functions(): BDFs of a multi-function PCIe
device could be different in all the 3 fields (bus, device, function),
so we need self.find_parent() and list all t
he BDFs below the parent;
3) to assign a device of the must-be-co-assigned devices, we require
all the related devices should be owned by pciback;
4) detect and disallow duplicate pci string specified in guest config
file due to carelessness.
Signed-off-by: Dexuan Cui <dexuan.cui@intel.com>
Tmem can share clean page cache pages for Linux domains
in a virtual cluster (currently only the ocfs2 filesystem
has a patch on the Linux side). So when one domain
"puts" (evicts) a page, any domain in the cluster can
"get" it, thus saving disk reads. This functionality
is already present; these are only bug fixes.
- fix bugs when an SE pool is destroyed
- fixes in parsing tool for xm tmem-list output for SE pools
- incorrect locking in one case for destroying an SE pool
- clearer verbosity for transfer when an SE pool is destroyed
- minor cleanup: merge routines that are mostly duplicate
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
table map track handles".
There is no race since the hypercall takes the
domain-lock. Furthermore removing locking from get_maptrack_handle()
races gnttab_setup_table().
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
This patch support exchange a page for a suspended PV guest from user
space.
The basic idea to offline a page is:
1) mark a page offline pending
2) If the page is owned by a HVM domain, user have to live migrate it.
In future, with stub-domain support, we can also exchange the page
without migration.
3) If the page is owned by a PV domain, we will try to exchange the
offline pending page to a new one and free the old page.
This patch achieves item 3.
The method to exchange the offline pending page for PV domain is:
1) Suspend the guest.
2) If the page is being granted out, return with offline pending.
3) Get a copy for the content
4) Scan all page table page to see if any reference to the offending
page, if yes, make the entry to be non-present to reduce the reference
count.
5) After update all page tables, user space tools will try to exchange
the old page. If the new mfn has no reference anymore (i.e.
count_info & count_mask =3D 1), the exchange will allocate a new page,
update the m2p and return success, otherwise it will return fail.
6) If step 5 is success, user space tools will update the content of
the new page change the p2m table, and change all entries scaned in
step 4 to point to new entry.
if step failed, it will try to undo step 4 to revert page table.
7) Resume the guest.
Please refer to thread in
http://www.mailinglistarchive.com/xen-devel@lists.xensource.com/msg63084.html
for more information.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
This patch firstly change the xc_core_arch_map_p2m() to map the p2m to
be writable, then it export this function.
One notice for this patch is, caller should make sure change the p2m
in flight will not cause trouble.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
When a tmem-enabled domain is destroyed, if the domain was
using a persistent pool, the domain destruction process
to scrubs page races tmem's attempts to gracefully dismantle
data structures. Move tmem_destroy earlier in the domain
destruction process.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Keir Fraser