Some of the PCI host bridges require private data. Add priv field
to struct pci_host_bridge, so such bridges may populate it with
their private data.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
When a device is passed through to a xl domU, the iomem ranges may
overlap with the extended regions. Remove iomem from extended regions.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Similarly to fba1b0974d, when a device is passed through to a
direct-map dom0less domU, the xen,reg ranges may overlap with the
extended regions. Remove xen,reg from direct-map domU extended regions.
Take the opportunity to update the comment ahead of find_memory_holes().
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
The default terminal settings in Linux will enable echo which interferes with
these tests. Set the value in the script to avoid failure caused by a settings
reset.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Commit f6d1bfa160 introduced flushing conring in console_init_preirq().
However, when CONFIG_EARLY_PRINTK is enabled, the early boot messages
had already been sent to serial before main console initialization. This
results in all the early boot messages being duplicated.
Change conring_flush() to accept argument listing devices to which to
flush conring. We don't want to send to serial at console initialization
when using early printk, but we want these messages to be send at conring
dump triggered by keyhandler.
Fixes: f6d1bfa160 ("xen/console: introduce conring_flush()")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Add a per-domain way to optionally disable traps for accesses
to unmapped addresses.
The domain flag is general but it's only implemented for Arm for now.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Fix the condition part of the for loop in p2m_invalidate_root() that
uses P2M_ROOT_LEVEL instead of P2M_ROOT_PAGES. The goal here is to
invalidate all root page tables (that can be concatenated), so the loop
must iterate through all these pages. Root level can be 0 or 1, whereas
there can be 1,2,8,16 root pages. The issue may lead to some pages
not being invalidated and therefore the guest access won't be trapped.
We use it to track pages accessed by guest for set/way emulation provided
no IOMMU, IOMMU not enabled for the domain or P2M not shared with IOMMU.
Fixes: 2148a125b7 ("xen/arm: Track page accessed between batch of Set/Way operations")
Reported-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Modify Arm32 assembly boot code to reset any unused MPU region, initialise
'max_mpu_regions' with the number of supported MPU regions and set/clear the
bitmap 'xen_mpumap_mask' used to track the enabled regions.
Introduce cache.S to hold arm32 cache related functions.
Use the macro definition for "dcache_line_size" from linux.
Change the order of registers in prepare_xen_region() as 'strd' instruction
is used to store {prbar, prlar} in arm32. Thus, 'prbar' has to be a even
numbered register and 'prlar' is the consecutively ordered register.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Introduce pr_t typedef which is a structure having the prbar and prlar members,
each being structured as the registers of the AArch32 Armv8-R architecture.
Also, define MPU_REGION_RES0 to 0 as there are no reserved 0 bits beyond the
BASE or LIMIT bitfields in prbar or prlar respectively.
In pr_of_addr(), enclose prbar and prlar arm64 specific bitfields with
appropriate macros. So, that this function can be later reused for arm32 as
well.
Signed-off-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Introduce the intc_hw_operations structure to encapsulate interrupt
controller-specific data and operations. This structure includes:
- A pointer to interrupt controller information (`intc_info`)
- Callbacks to initialize the controller and set IRQ type/priority
- A reference to an interupt controller descriptor (`host_irq_type`)
- number of interrupt controller irqs.
Add function register_intc_ops() to mentioned above structure.
Co-developed-by: Romain Caritey <Romain.Caritey@microchip.com>
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Implements dt_processor_hartid() to get the hart ID of the given
device tree node and do some checks if CPU is available and given device
tree node has proper riscv,isa property.
As a helper function dt_get_hartid() is introduced to deal specifically
with reg propery of a CPU device node.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
To align with other architectures where <asm/page.h> is included from <asm/mm.h>
(and not the other way around), the following changes are made:
- Since <asm/mm.h> is no longer included in <asm/page.h>:
- Move the definitions of paddr_to_pte() and pte_to_paddr() to <asm/mm.h>,
as paddr_to_pfn() and pte_to_paddr() are already defined there.
- Move _vmap_to_mfn() to <asm/mm.h> because mfn_from_pte() is defined there and
open-code it inside macros vmap_to_mfn().
- Drop the inclusion of <xen/domain_page.h> from <asm/page.h> to resolve a compilation error:
./include/xen/domain_page.h:63:12: error: implicit declaration of function '__mfn_to_virt'; did you mean 'mfn_to_nid'? [-Werror=implicit-function-declaration]
63 | return __mfn_to_virt(mfn_x(mfn));
This happens because __mfn_to_virt() is defined in <asm/mm.h>, but due to
the current include chain:
<xen/domain.h>
<asm/domain.h>
<xen/mm.h>
<asm/mm.h>
<asm/page.h>
<xen/domain_page.h>
static inline void *map_domain_page_global(mfn_t mfn)
{
return __mfn_to_virt(mfn_x(mfn));
}
...
...
#define __mfn_to_virt() ...
This leads to a circular dependency and the build error above.
As a result, since <xen/domain_page.h> is no longer included in
<asm/page.h>, the flush_page_to_ram() definition cannot remain there.
It is now moved to riscv/mm.c.
Including <asm/page.h> from <asm/mm.h> does not cause issues with the
declaration/definition of clear_page() when <xen/mm.h> is included, and
also prevents build errors such as:
common/domain.c: In function 'alloc_domain_struct':
common/domain.c:797:5: error: implicit declaration of function 'clear_page';did you mean 'steal_page'? [-Werror=implicit-function-declaration]
797 | clear_page(d);
| ^~~~~~~~~~
| steal_page
caused by using clear_page() in common/domain.c.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A later patch removes boot_module and replaces its uses with bootmodule.
The equivalent field for "type" doesn't have BOOTMOD_UNKNOWN as a zero
value, so it must be explicitly set in the static xen_boot_info.
Not a functional change.
Signed-off-by: Alejandro Vallejo <agarciav@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The way they currently include each other, with one of the includes
being conditional on CONFIG_GRANT_TABLE, makes it hard to know which
contents are included when.
Break the cycle by removing the asm/grant_table.h include.
Not a functional change because.
Signed-off-by: Alejandro Vallejo <agarciav@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The comment is similar to extended capabilities in the function
below.
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The early exit from domain_cmdline_size() is buggy. Even if there's no
bootloader cmdline and no kextra, there still might be Xen parameters to
forward, and therefore a nonzero cmdline length.
Explain what the function is doing, and rewrite it to be both more legible and
more extendible.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
It's non-init caller was dropped in Xen 4.14.
No functional change.
Fixes: 02e9a9cf20 ("xen: remove XEN_SYSCTL_set_parameter support")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Let's avoid such open-coding. There's also no need to use
guest_cpu_user_regs(), when the function has a suitable parameter.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The definitions of device_tree_get_reg() and device_tree_get_u32() are already
in common code, so move their prototypes there as well.
Signed-off-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
In file included from ./include/xen/pci.h:72,
from drivers/pci/pci.c:8:
./arch/arm/include/asm/pci.h:131:50: error: ‘struct rangeset’ declared inside parameter list will not be visible outside of this definition or declaration [-Werror]
131 | static inline int pci_sanitize_bar_memory(struct rangeset *r)
| ^~~~~~~~
cc1: all warnings being treated as errors
Fixes: 4acab25a93 ("x86/vpci: fix handling of BAR overlaps with non-hole regions")
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
It hasn't been used since the introduction of the script. Also drop
relevant CFLAGS and header inclusion.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The commit referenced below changed the type of the first parameter.
Misra C:2012 Rule 8.3 requires the declaration to follow suit.
Fixes: bf0cd071db ("xen/pmstat: consolidate code into pmstat.c")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
This option enables the system suspend support. This is the mechanism that
allows the system to be suspended to RAM and later resumed.
The patch introduces three options:
- HAS_SYSTEM_SUSPEND: indicates suspend support is available on the platform.
- SYSTEM_SUSPEND_ALWAYS_ON: used for architectures where suspend must always
be enabled.
- SYSTEM_SUSPEND: user-facing option to enable/disable suspend if supported.
Defaults to enabled if SYSTEM_SUSPEND_ALWAYS_ON is set and depends on
HAS_SYSTEM_SUSPEND.
On x86, both HAS_SYSTEM_SUSPEND and SYSTEM_SUSPEND_ALWAYS_ON are selected by
default, making suspend support always enabled. The options are designed to
be easily extensible to other architectures (e.g., PPC, RISC-V) as future
support is added.
Signed-off-by: Mykyta Poturai <mykyta_poturai@epam.com>
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In preparation for x86 to start using bootmodule instead of boot_module
Signed-off-by: Alejandro Vallejo <agarciav@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
The 2 missed ones are: register_runstate_phys_area and
register_vcpu_time_phys_area.
Fixes: d5df44275e ("domain: introduce GADDR based runstate area registration alternative")
Fixes: 60e544a8c5 ("x86: introduce GADDR based secondary time area registration alternative")
Signed-off-by: Gang Ji <gang.ji@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Function avail_domheap_pages() is only invoked by get_outstanding_claims(),
so it could be inlined into get_outstanding_claims().
Move up avail_heap_pages() to avoid declaration before
get_outstanding_claims().
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
We move the following functions into drivers/acpi/pmstat.c, as they
are all designed for performance statistic:
- cpufreq_residency_update()
- cpufreq_statistic_reset()
- cpufreq_statistic_update()
- cpufreq_statistic_init()
- cpufreq_statistic_exit()
Consequently, variable "cpufreq_statistic_data" and "cpufreq_statistic_lock"
shall become static.
We also move out acpi_set_pdc_bits(), as it is the handler for sub-hypercall
XEN_PM_PDC, and shall stay with the other handlers together in
drivers/cpufreq/cpufreq.c.
Various style corrections shall be applied at the same time while moving these
functions, including:
- brace for if() and for() shall live at a seperate line
- add extra space before and after bracket of if() and for()
- use array notation
- convert uint32_t into unsigned int
- convert u32 into uint32_t
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
If the total returned by Xen is more than the number of elements
allocated, it means that the buffer was too small and so the data is
incomplete. Retry to get all the data.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
xc_pm_get_pxstat() requires the caller to allocate the pt and trans_pt
buffers but then calls xc_pm_get_max_px() to determine how big they are
(and hence how much Xen will copy into them). This is susceptible to
races if xc_pm_get_max_px() changes so avoid the problem by requiring
the caller to also pass in the size of the buffers.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
If set_px_pminfo is called a second time with a larger state_count than
the first call, calls to PMSTAT_get_pxstat will read beyond the end of
the pt and trans_pt buffers allocated in cpufreq_statistic_init() since
they would have been allocated with the original state_count.
Secondly, the states array leaks on each subsequent call of
set_px_pminfo.
Fix both these issues by ignoring subsequent calls to set_px_pminfo if
it completed successfully previously. Return success rather than an
error to avoid errors in the dom0 kernel log when reloading the
xen_acpi_processor module.
At the same time, fix a leak of the states array on error.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Check that the total number of states passed in and hence the size of
buffers is sufficient to avoid writing more than the caller has
allocated.
The interface is not explicit about whether getpx.total is expected to
be set by the caller in this case but since it is always set in
libxenctrl it seems reasonable to check it and make it explicit.
Fixes: c06a7db0c5 ("X86 and IA64: Update cpufreq statistic logic for supporting both x86 and ia64")
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Current logic of emulating legacy capability list is only for domU.
So, expand it to emulate for dom0 too. Then it will be easy to hide
a capability whose initialization fails in a function.
And restrict adding PCI_STATUS register only for domU since dom0
has no limitation to access that register.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The input handling is already implemented, and that limitation is not
there anymore.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Live update of xenstored is available since Xen 4.15 and it is tested
on a regular basis since then.
Switch the live update support from "Tech Preview" to "Supported".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Depending on the build environment, HOSTCC can be different than CC. With
the recent `install` rule addition, this would put a binary of a wrong
format in the destdir (e.g. building tests on x86 host for Arm target).
Take the opportunity to adjust the `run` rule to only run the test if
HOSTCC is CC, else print a warning message.
Fixes: 96a587a057 ("tools/tests: Add install target for vPCI")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Change "RCar3/RCar4" to "R-Car Gen3/Gen4" to match official Renesas branding.
Aligns with documentation and industry-standard terminology.
Signed-off-by: Jahan Murudi <jahan.murudi.zg@renesas.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Add missing input register descriptions to enable_secondary_cpu_mm
and enable_boot_cpu_mm functions. This update improves code clarity
and consistency in comments.
No functional changes are introduced by this patch.
Signed-off-by: Mykola Kvach <mykola_kvach@epam.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
Without "pipefail", $? have the exit value of `tee`, which should
always be 0. But instead of using "pipefail", do collect the value of
from the test with $PIPESTATUS.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
This is easier than escaping individual characters, especially '&'
and '<' which are problematic if present.
We might still need to escape ']]>' if this string is present in the
test output, but hopefully not.
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Oleksandr Andrushchenko