The patch is incorporated from Ben's Virtual Iron's ACPI shutdown patch
in changeset 9989:f8d20c3e4225
The patch support guest ACPI Windows shutdown, as well as ACPI guest
Linux "halt -p" and "shutdown -h now".
Signed-off-by: Ben Thomas <ben@virtualiron.com>
Signed-off-by: Winston Wang <winston.l.wang@intel.com>
Adds ACPI _PRT table for PCI IRQ routing table in PIC mode
and fixes the _PRT table in APIC mode
Signed-off-by: Tang Liang <tangliang@lenovo.com>
Signed-off-by: Winston Wang <winston.l.wang@intel.com>
The patch support ACPI UP Guest Windows 2000, XP and 2003, based on
this we are going to add more support on SMP and 64bit Windows( which
are only working in ACPI mode) later. We tested: in ia32 guest:
a. Installation and boot of Windows XP sp2 and 2003 server in ACPI
mode
b when boot to both window, no yellow mark in device manger and USB,
network card and IDE DMA are working.
c. clean boot (without ACPI related errors) on UP and 4 vcpu rhel4u1
SMP guest and got ioapic Interrupt assigned according to ACPI DSDT
table's _PRT table's GSI.
To minimize the implementation efforts to satisfy the ACPI OS
installation and boot, we implemented ACPI only event logical model by
emulating ACPI hardware based on PIIX4 (Intel 82371ab) by: Populating
the PIIX4 ACPI bridge PCI configuration space; Adding ACPI timer
(required during windows installation/boot), PM1 event register block
and PM1 control register block (both are required during
installation/boot, shutdown, entering and leaving PM S state if adding
those features later), we provided full ACPI hardware registers above
using byte/word/dword access per ACPI spec requirement.
The patch also fixed many existing hvm ACPI related bugs, such as
warnings when boot to ACPI UP and SMP guest Linux OS; adding new ACPI
_PRT table reporting PCI IRQ routing table in PIC mode, adding new _PRT
table in APIC mode, that fixed no IRQ GSI cause it is forced to shutdown
when OS find new device to assign IRQ without ACPI event service; The
patch also fixed the ACPI DSDT table's PCI resource conflict with guest
e820 table when booting and installing ACPI Windows; we also added ACPI
shutdown service by incorporating the code in ACPI "hardware enable
register writer" from Ben's Virtual Iron's team's patch in changeset
9989:f8d20c3e4225.
We only provide minimum power management requirement support per spec-c1
and S5 for shutdown, may be S4 (hibernating which is meaningful for user
to save their working section) in the future.
Please note, current patch needs to have following switches in guest
configuration to enable proper ACPI support
a. need to add ACPI=1 (apic=1 if boot SMP Linux guest plus vcpu=
number want to test) in xmexample.hvm
b. need to add USB support: USB=1 and usbdevice='device' (or
='tablet') as the pm register base is static..., I will adding dynamic
ACPI FADT table for pm register base pointer later.
When installing guest OS in ACPI mode, need to manually tell Windows
setup program to install single core ACPI HAL:
After passing the 1st screen of windows setup of install Windows,
the first thing you'll see at the bottom of the screen is the
option to press F6 if you need to install a SCSI or RAID
controller. Don't press F6. Press F5 instead. This will take
you to a separate menu of Hardware Abstraction Layer's where
you can choose an appropriate HAL .The choices will be:
ACPI Multiprocessor PC
ACPI Uniprocessor PC
Advanced Configuration and Power Interface (ACPI) PC
...
Standard PC
Standard PC with C-Step i486
Please select "Advanced Configuration and Power Interface (ACPI) PC"
using current patch.
Signed-off-by: Winston Wang <winston.l.wang@intel.com>
of void pointers. It also fixes a recently slipped in acm bug that hangs
Xen when a domain is destroyed.
Signed-off by: Reiner Sailer <sailer@us.ibm.com>
No longer open the device as non-blocking: all reads immediately follow
a select() on the device indicating it's ready to read.
Signed-off-by: John Levon <john.levon@sun.com>
The 02_block_device_write_verify.py test that I wrote is failing because
the regular expression to extract the md5sum is only looking at the
first line of output and the sum is in a subsequent line (after the
output from dd).
This patch fixes the test by adding the multiline flag to the search
parameters so that the search looks in all lines of the output for the
md5sum. I added the multiline flag in all searches to make the tests
more robust against changes in the output format of the commands used.
I'm not exactly sure how this slipped through my testing. I suspect
that I forgot to install the new python file after updating the test to
use dd and then tested the old version a second time by accident.
Either that or it really did work when I tested it and the output format
has changed for some reason.
I tested this patch against xen-unstable 10326 and the 02 test fails
without the patch and succeeds with it.
Thanks to James Dykman for some help with this.
Signed-off-by Harry Butterworth <butterwo@uk.ibm.com>
Subsequent patches will follow in the coming weeks that will enable
Xen ACM to control assignment of resources (e.g., block devices and
networking) to virtual machines based on resource labels and the
active security policy.
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
device model. To support USB there are two new optional config lines
that can be added to the guest config file:
usb=1
This will enable USB without defining a specific USB device.
This option is assumed and not needed if the `usbdevice' option
is given.
usbdevice='device'
This will enable USB and also enable support for the given device.
Currently, the only two devices are `mouse' (a PS/2 mouse) and
`tablet' (an absolute pointing device). The advantage of `tablet'
is that Windows guests will automatically recognize and support this
device so specifying the config line:
usbdevice='tablet'
will create a mouse that works transparently with Windows guests
under VNC. (Linux doesn't recognize the USB tablet yet so Linux
guests under VNC will still need the Summagraphics emulation.)
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Fabrice Bellard on the QEMU project). This patch clears the
memory in the BIOS call rather than when the Cirrus Logic register changes,
which more closely matches what happens on the real hardware.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Thus all can be disabled at compile time. It would be easy to
make enabling/disabling a run-time option too.
Signed-off-by: Keir Fraser <keir@xensource.com>
Advertising more CPUs than the guest is allocated hangs boot
of Windows XP (selects wrong HAL). The correct fix here is
to dynamically generate the MPS table (at least the CPU
entries) from hvmloader binary.
Signed-off-by: Keir Fraser <keir@xensource.com>
This patch pass the vcpus number to VT-i domain guest firmware,
so that guest firmware can set SMP info accordingly, mostly in
ACPI MADT table.
This patch is required by VT-i SMP support.
Signed-off-by: Yu Ke <ke.yu@intel.com>
Extends vmxassist to handle two cases related to mode switching found
while experimenting with different boot loaders.
The first case is use of the JMP instruction with memory location
operands to complete a switch to protected mode. This patch adds
emulation for this form of the JMP instruction to vmxassist.
The second case is where boot loader code does not save/restore a
non-zero SS register across a protected mode traversal.
Zeroing the SS register in vmxassist results in all sorts of problems
in the domU after returning back to real mode. This patch stores
segment register values before entering protected mode and correctly
restores the old values (instead of an incorrect zero value) when
reentering real mode.
Signed-off-by: Kevin Tronkowski <ktronkowski@virtualiron.com>
pae_pgdir_above_4gb tp guests that have enabled this vmassist.
Control tools ensure all PAE page directories are below 4GB
unless the vmassist is enabled (triggered via an extended-cr3
option in guest Elf header).
Signed-off-by: Keir Fraser <keir@xensource.com>
qemu will emulate up to 4 serial lines (COM1 - COM4). One of these
lines supports a Summagraphics protocol. This has changed recently,
and it's now always COM2. This patch allows the user to specify
to qemu which lines should be serial lines, and the code will place
the Summagraphics compatible line at just above the last specified
serial line. qemu defaults serial line 0 (COM1) to be "vc", resulting
in the Summagraphics support residing on COM2. This is in keeping
with the current behavior.
The results, via qemu command line, are:
<none> COM2
-serial x COM2
-serial x -serial x COM3
-serial x -serial x -serial x COM4
-serial x -serial x -serial x -serial x <none>
The results are deterministic, and allow the use of up to 4 serial
lines including none with Summagraphics support. There is no
change from current behavior, unless requested.
Signed-off-by: Ben Thomas <ben@virtualiron.com>
util/security.py to be either strings or ints (previously only strings
would work due to the underlying call to lowlevel.acm).
Signed-off-by: Bryan D. Payne <bdpayne@us.ibm.com>
Signed-off-by: Reiner Sailer <sailer@us.ibm.com>
This test imports a ram disk device as a physical device into a domU.
The domU initialises the ram disk with data from /dev/urandom and
calculates the md5 checksum of the data (using tee as it is written so as to
avoid reading it back from the device which might potentially mask
problems).
The domU is stopped and the md5 checksum of the data on the device is
calculated by dom0. The test succeeds if the checksums match, indicating
that all the data written by domU was sucessfully committed to the
device.
This patch also enables tee in BusyBox on the ramdisk and increments the
xm-test version number to 0.8.0.
The patch also installs the block-integrity tests in the default test
set so they get executed.
Signed-off-by: Harry Butterworth <butterwo@uk.ibm.com>
Signed-off-by: Ewan Mellor <ewan@xensource.com>
