Temporarily retain unsafe behaviour of reading f.e. directory.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
- handle realloc errors
- remove redundancy of libxl__append_disk_list_of_type return value
and ndisks paramter.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Subsequent patches will endeavour to make reality match this defined
interface.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Now that IDL type destructors are no longer libxl_*_destroy we can use the more
common libxl_NOUN_VERB structure here.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Destroy is an overloaded term which would commonly like to be used for actual
destructive operations, such as destroying a domain etc.
Dispose isn't a great term but it does the job.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Fix FPU switching uncovered with Hyper-V: Do FPU switching always on
the n1 vmcb rather doing it on the current active vmcb. The FPU state
between n1 and n2 vmcb is already synced in the vmrun and vmexit
emulation.
This fixes the situation where the n2 vmcb had the #NM intercept bit
set but the virtual vmcb did not. That means it was believed the l1
guest can handle an #NM intercept but was actually wrong.
The result were three #GP's with error code 0x11 in the l1 guest.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Keir Fraser <keir@xen.org>
pvhvm running with more than 32 vcpus and pv_irq/pv_time enabled
need vcpu placement to work, or else it will softlockup.
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@oracle.com>
Committed-by: Keir Fraser <keir@xen.org>
In order to have two different DSDT tables for rombios and SeaBIOS,
this patch introduce a new parameter to acpi_build_tables() which
contain the DSDT table to load.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
The ACPI PIIX4 device in QEMU upstream as not the same behavior to
handle PCI hotplug. This patch introduce the necessary change to the
DSDT ACPI table to behave as expceted by the new QEMU.
To switch to this new DSDT table version, there is a new option
--dm-version to mk_dsdt.
Change are inspired by SeaBIOS DSDT source code.
There is few things missing with the new QEMU:
- QEMU provide the plugged/unplugged status only per slot (and not
per func like qemu-xen-traditionnal.
- I did not include the _STA ACPI method that give the status of a
device (present, functionning properly) because qemu-xen does not
handle it.
- I did not include the _RMV method that say if the device can be
removed,
because the IO port of QEMU that give this status always return
true. In
SeaBIOS table, they have a specific _RMV method for VGA, ISA that
return
false. But I'm not sure that we can do the same in Xen.
So, the only way to remove a device is from outside of the guest (like
with xl pci-detatch), and can not be initiated from inside.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Use __attribute__((format(printf,..))) for the function _stmt to
prevent any mistake.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch move the IO port range reservation from the dsdt.asl to
mk_dsdt. This IO port range need to be generated by mk_dsdt, because
qemu-xen use different port. The IO port for qemu-xen will be added in
a later patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
With this new option, there is no need to compile mk_dsdt for each
DSDT table that we want. The Makefile is a bit reorganize to handle
this new option and to prepare more change in a coming patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
asserted
PV on HVM guests can loose level interrupts coming from emulated
devices if they have been remapped onto event channels. The reason is
that we are missing the code to inject a pirq again in the guest when
the guest EOIs it, if it corresponds to an emulated level interrupt
and the interrupt is still asserted.
Fix this issue and also return error when the guest tries to get the
irq_status of a non-existing pirq.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Alter the 'reserved' uint8_t to be used a 'flag'. We use only for one
flag: BLKIF_DISCARD_SECURE.
That flag can only be set if the backend has set 'discard-secure' to
one. If backend has not set 'discard-secure' to one, that flag will
have no effect.
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Keir Fraser <keir@xen.org>
We flesh out details on what is expected of 'feature-flush' and
what are some of the extra parameters that the frontend can read
from the backend. Those extra parameters are: : discard-aligment,
and discard-granularity.
Acked-by: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Keir Fraser <keir@xen.org>
Just a simple sed s/trim/discard/. We are ignoring the comments
which are incorrect.
The reason for the name change is that TRIM is specific to ATA
while the operation can be done on top of SCSI interfaces too.
Hence the rename to something more generic.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Committed-by: Keir Fraser <keir@xen.org>
Fedora 16 grub2 configuration file can have lines like
set default="${saved_entry}"
and a string containing an integer is expected
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The grub2 configuration file in Fedora 16 can have one or more
menuentrys in a submenu, with configuration of the form
submenu "Xen 4.1" {
menuentry ... {
...
}
}
(this example occurs when the xen hypervisor is installed on the
guest)
Ignore the submenu line and the corresponding }
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The grub2 configuration file in Fedora 16 can have GPT partition
references like (hd0,gpt2) so remove the "gpt" string where necessary
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Fedora 16 puts grub configuration files in /boot/grub2/grub.cfg so
pygrub should look there as well
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
On Fedora 16 the first GPT partition is a boot partition for grub2 with
the grub2 configuration in the second partition.
Check all GPT partitions for grub configuration, not just the first.
[ Also remove now-inaccurate comment. -iwj ]
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Otherwise we erroneously fall through the LIBXL_DOMAIN_TYPE_PV case into the
"default: abort()".
(I'm sure we fixed this once already...)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Dario Faggioli <dario.faggioli@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Move HVM io fields into a structure.
On MMIO instruction failure print out some more bytes.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Keir Fraser <keir@xen.org>
Sandy bridge introduces new MSR to get cc7/pc2 residency (core C-state
7/package C-state 2). Print the cc7/pc2 residency when on sandy bridge
platform.
Signed-off-by: Yang Zhang <yang.z.zhang@intel.com>
Committed-by: Keir Fraser <keir@xen.org>
hpet_fsb_cap_lookup(), if it doesn't find any FSB capable timer,
leaves hpet_events allocated, while hpet_events->cpumask may not have
been, As we're pretty generous with these one-time allocations already
(in that hpet_events doesn't get freed when no usable counters were
found, even if in that case only the first array entry [or none at
all] may get used), simply make the cpumask allocation in the legacy
case independent of whether hpet_events was NULL before.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Christoph Egger <Christoph.Egger@amd.com>
Committed-by: Keir Fraser <keir@xen.org>
microcode_fits() must return distinct values for the success and
no-fit-but-no-error cases, so the caller can react accordingly. Make
it return 1 in the success case, and adjust its single caller.
Also remove an impossible code path - install_equiv_cpu_table(), which
gets called prior to microcode_fits(), never leaves equiv_cpu_table
being NULL without also returning an error.
Note that this is still awaiting testing on a system where the
regression was actually observed (which also requires a new enough
microcode_ctl package). Note also that this will need to be
backported to 4.0 and 4.1 (or the broken c/s that got backported
there reverted).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Committed-by: Keir Fraser <keir@xen.org>
Hyper-V starts a root domain which effectively an l2 guest.
Hyper-V passes its devices through to the root domain and
let it do the MMIO accesses. The emulation is done by
Xen (host) and Hyper-V forwards the interrupts to the l2 guest.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Generally there was a NR_CPUS-bits wide array in these functions and
another (through a cpumask_t) on their callers' stacks, which may get
a little large for big NR_CPUS. As the functions can fail anyway, do
the allocation in there.
For the x86/MCA case this require a little code restructuring: By using
different CPU mask accessors it was possible to avoid allocating a mask
in the broadcast case. Also, this was the only user that failed to
check the return value of the conversion function (which could have led
to undefined behvior).
Also constify the input parameters of the two functions.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
... thus reducing the per-CPU data area size back to one page even when
building for large NR_CPUS.
At once eliminate the old __cpu{mask,list}_scnprintf() helpers.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Use cpumask_copy() instead of direct variable assignments for copying
CPU masks. While direct assignments are not a problem when both sides
are variables actually defined as cpumask_t (except for possibly
copying *much* more than would actually need to be copied), they must
not happen when the original variable is of type cpumask_var_t (which
may have lass space allocated to it than a full cpumask_t). Eliminate
as many of such assignments as possible (in several cases it's even
possible to collapse two operations [copy then clear one bit] into one
[cpumask_andnot()]), and thus set the way for reducing the allocation
size in alloc_cpumask_var().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
The former is the runtime equivalent of NR_CPUS (and users of NR_CPUS,
where necessary, get adjusted accordingly), while the latter is for the
sole use of determining the allocation size when dynamically allocating
CPU masks (done later in this series).
Adjust accessors to use either of the two to bound their bitmap
operations - which one gets used depends on whether accessing the bits
in the gap between nr_cpu_ids and nr_cpumask_bits is benign but more
efficient.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Disallow xenpaging in a PoD guest until coexistance between the two features
is properly implemented.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Add some documentation for each of the p2m_mem_paging functions to describe
what they ought to do.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Add checks to forward the p2m_ram_paging* state properly during page-in.
Resume can be called several times if several vcpus called populate for
the gfn. Finish resume only once.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
While doing so, eliminate the use of struct irq_cfg and convert the
CPU mask accessors to the new style ones as far as possible.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
struct irq_cfg really has become an architecture extension to struct
irq_desc, and hence it should be treated as such (rather than as IRQ
chip specific data, which it was meant to be originally).
For a first step, only convert a subset of the uses; subsequent
patches (partly to be sent later) will aim at fully eliminating the
use of the old structure type.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
If the serial device is not "pty" then there is nothing to do but this is not
an error. Removes a spurious warning if e.g. serial="file:/tmp/serial.log" is used:
libxl: error: libxl_qmp.c:137:register_serials_chardev_callback: Failed to store serial port information in xenstore: No such file or directory
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Backends were inconsistent about reporting and it's a pain to edit them all
when adding a new class of osdep.
Signed-off-by: Ian Campbell <Ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
---
Requires Daniel De Graaf's "libxc: add xc_gntshr_* functions"
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
currently it return success no matter what.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Ian Campbell
Christoph Egger
Zhenzhong Duan
Anthony PERARD
Stefano Stabellini
Konrad Rzeszutek Wilk
Michael Young
Yang Zhang
Jan Beulich
Tim Deegan
Jan Beulich
Olaf Hering