Because the PCI-MSI IRQ numbers are allocated dynamically, labeling
them by number is not useful. Instead, for all IRQs beyond
nr_irqs_gsi, use the associated msi_desc to find the PCI device and
use the label of the PCI device for the IRQ.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
In FLASK, event channel labels are distinct from the labels of the
domain using them. When debugging policy issues, it is useful to be
able to view the current label of event channels; add this label to
the event channel dump.
This patch also adds the IRQ associated with a PIRQ for event channels
bound to a PIRQ, and moves the xen_consumer flag to the front to
create more consistent alignment in the output.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
Never mind that ballooning a shared page makes no sense. We still fix it
because it may be exercised.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Have them used locked accesors to the gfn and the underlying shared mfn.
Have them return the number of shared refs to the underlying mfn.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
There are several corner cases in which a page is paged back in, not by paging,
and the stats are not properly updated.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Currently, mm-locks.h enforces a strict ordering between locks in the mm
layer lest there be an inversion in the order locks are taken and thus
the risk of deadlock.
Once p2m lookups becoming synchronized, get_gfn* calls take the p2m lock, and a
new set of inversion arises. Reorder some of the locks in the shadow code so
that even in this case no deadlocks happen.
After this, synchronized p2m lookups are in principle ready to be enabled in
shadow mode.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Xen doesn't clean the type flag when dropping the type count for a page to
zero. So, looking at the type flag when nominating a page for paging it's
incorrect. Look at the type count instead.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
This state in the paging state machine became unnecessary after the last
few updates.
Once eliminated, rename p2m_ram_paging_in_start to p2m_ram_paging_in.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Add a -F (fallbacks) option to xl destroy|reboot to cause an ACPI shutdown or
reset event to be sent to the guest in the event that the guest does not
support the PV control interface.
This is not the default because the response to these triggers is an
guest-internal configuration.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Unlike previous iterations of this patch the enum values now match the
underlying domctl values.
I looked at updating xl.cfg(5) for these while I was here but frankly, even
after reading the comment in xen/include/public/hvm/params.h, I don't have a
clue what they mean, no_missed_ticks_pending in particular might as well be
written in klingon...
For the same reason I didn't try and give the enum more user-friendly names.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
send_trigger already included all the operations covered by button_press.
Rework send_trigger to take an enum instead of a string.
I stopped short at removing the xl "button-press" command but instead have
marked it as deprecated.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Originally libxltypes.py provided the infrastructure and libxl.idl provided the
specific types.
In 23887:a543e10211f7 libxl.idl became libxl_types.idl (to allow for
libxl_types_internal.idl) which means we now have libxl_types.FOO and
libxltypes.FOO providing different things and annoying people in tab
completion.
Rename the infrastructure as idl.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Although xl parsed this value for both PV and HVM domains (and then a second
time for HVM domains) inside libxl it only impacts HVM guests so I think this
is the right place for it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Remove "target_ram", "acpi", "vcpus" and "vcpu_avail" from device model info
and use domain_build_info instead. These must all be consistently specified to
both the domain and the device model, there is no need (and a great deal of
danger) in exposing a way for a user of libxl to set them differently.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Reduces duplication in libxl_vfb and libxl_device_model.
Updated bindings but the python ones in particular are unlikely to be useful
until a user presents itself and fixes them up.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Makes handling of nested structs more correct.
Only change to the generated code right now is that the FOO_Val
(C->ocamlC) function for Enumeration types now takes the C argument by
value instead of reference.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
People typically don't look for comments in generated source and the syntax for
specifying them in the IDL makes things harder to follow.
Instead just use source code comments in the IDL itself.
I dropped a bunch of "foo bool # enable or disable foo" type comments. A lot of
the remainder still aren't terribly useful though.
No change to the generate code other than the comments being removed.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
This patch adds support for yajl versions 2.x, while retaining 1.x
compatibility. All the needed ifdefs can be found in libxl_json.h.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The latter is GPL which makes the whole of mini-os GPL rather than BSD
as intended. In tree users are all GPL or GPL-compatible but we should
fix this so that mini-os is BSD. Do so by using the same BSD
sys/queue.h as we use in libxl.
Tested with the builtin mini-os test app and qemu stubdomain, both of which
appear to still function as expected.
Move tools/libxl/external and the associated sed script to
tools/include/xen-external to allow more sensible access from mini-os.
Also add s/NULL/0/ in the sed script due to NULL not always being
defined in stubdom code when mini-os/wait.h is included.
As well as the obvious ABI changes there are a few API updates
associated with the change:
- struct rw_semaphore.wait_list is unused
- remove_waiter needs to take the wait_queue_head
The latter requires a qemu update, so there is also a QEMU_TAG
update in this changeset.
I sprinkled some extra-emacs local variables around the files I edited
which didn't have them.
I think this should be backported to the stable branches since
external users of mini-os may have been mislead into thinking they
could safely link mini-os against GPL-incompatible code.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
If the guest is an HVM guest and it is not using the vector callback
mechanism, refuse to remap pirqs onto event channels.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Tested-by: Paulian Bogdan Marinca <paulian@marinca.net>
Committed-by: Keir Fraser <keir@xen.org>
All bitmaps maintained by xc_bitops.h are used in single threaded
applications. So nothing will change the bitmaps content, adding
volatile adds just unneeded memory reloads.
xenpaging uses bitmaps alot and using non-volatile versions will
slightly improve performance.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Keir Fraser <keir@xen.org>
Daniel De Graaf
Ian Jackson
Andres Lagar-Cavilla
Ian Campbell
Dietmar Hahn
Roger Pau Monne
Stefano Stabellini
Keir Fraser
Olaf Hering