Replace usage of buildmakevars2file with buildmakevars2header. The macro
generates a C header file, so remove code which converts shell variables
into C defines. Also update the dependency, the macro itself creates a
dependency for _paths.h. A temporary file is not needed anymore.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This macro is similar to buildmakevars2file, it just creates a C header
file instead of shell style syntax. Upcoming changes will use this macro
in libxl and libxc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
genpath is a detail of buildmakevars2file. Replace the dependency to
genpath with the actual buildmakevars2file target. This change by
itself does not fix any bug. Upcoming changes will add dependencies to
$(target), but no rule exist to create $(target).
To force a rebuild of the $(1) rule the target now depends on the
existing .phony target. This dummy target is already used elsewhere in
the code.
No change in behaviour is expected by this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To maintain the list of directories in a single place, move the existing
list into its own variable and use it in buildmakevars2file.
Required for upcoming changes.
Trim also whitespaces.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
/var/run is a runtime directory. It is not supposed to be packaged.
Remove unused SUBSYS_DIR variable from Config.mk and distro_mapping.txt.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
install-hotplug and install-udev are obsolete since commit 57bcfa11
("tools/hotplug: Separate OS-specific scripts.")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_LOCK_DIR because it is a compiletime setting. Also /var/lock
might be empty on startup because it is a tmpfs mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_RUN_DIR instead of hardcoded path because it is a compiletime
setting. Also /var/run might be empty on startup because it is a tmpfs
mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Move location of temporary bootfiles from /var/run/xend/boot to
/var/run/xen/pygrub. Create the subdirectory if does not exist.
The <dir> argument --output-directory must be an existing directory.
The reason for this change is that all entrys below /var/run have to be
created at runtime in case /var/run is cleared on every boot.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The directory tools/python/xen/util does not exist.
Upcoming changes to genpath will fail if the rule persists.
Nothing uses path.py (anymore?), so get rid it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed from .gitignore too ]
Even if xen is configured and compiled with different --prefix= so that
it operates entirely below $prefix, the resulting package from 'make
rpmball' is always called "xen.rpm".
Use an environment name to give a different name.
This can be used like this:
suffix=-bugN
prefix=/opx/xen/staging${suffix}
./configure --prefix=${prefix}
make rpmball PKG_SUFFIX=${suffix}
The result will be "xen-bugN.rpm" instead of "xen.rpm". The benefit is that
many xen${suffix}.rpm packages can be installed at the same time.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
stubdom/lwip-x86_64/src/core/dhcp.c: In function 'dhcp_create_request':
stubdom/lwip-x86_64/src/core/dhcp.c:1359:71: error: array subscript is above array bounds [-Werror=array-bounds]
dhcp->msg_out->chaddr[i] = (i < netif->hwaddr_len) ? netif->hwaddr[i] : 0/* pad byte*/;
gcc can not know if hwaddr_len exceeds the hwaddr array size,
so force an upper limit to assist gcc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
This allows us to support sparse physical address maps which we previously
could not because the frametable would end up taking up an enormous fraction
of RAM.
On a fast model which has RAM at 0x80000000-0x100000000 and
0x880000000-0x900000000 this reduces the size of the frametable from
478M to 84M.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
I wanted to make fill_mask a public function so I could use it on ARM, but it
was actually easier to think of a (semi) reasonable public name for the users
of it, so that is what I have done.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
The "pdx compression" functionality will be useful on ARM as well.
Move the code to common code+header and introduce HAS_PDX to control when it is
built. L2_PAGETABLE_SHIFT is x86 specific, so introduce PDX_GROUP_SHIFT to
abstract it out.
ARM has no need for superpage compression (yet?) and lacks SUPERPAGE_SHIFT so
those functions (spage_to_mfn et al) are not moved.
No affect on x86 and no change for ARM (yet).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Currently we support only 40-bits. This is insufficient on systems where
peripherals which need to be 1:1 mapped to dom0 are above the 40-bit limit.
Unfortunately the hardware requirements are such that this means that the
number of levels in the P2M is not static and must vary with the number of
implemented physical address bits. This is described in ARM DDI 0487A.b Table
D4-5. In short there is no single p2m configuration which supports everything
from 40- to 48- bits.
For example a system which supports up to 40-bit addressing will only support 3
level p2m (maximum SL0 is 1 == 3 levels), requiring a concatenated page table
root consisting of two pages to make the full 40-bits of addressing.
A maximum of 16 pages can be concatenated meaning that a 3 level p2m can only
support up to 43-bit addresses. Therefore support for 48-bit addressing
requires SL0==2 (4 levels of paging).
After the previous patches our various p2m lookup and manipulation functions
already support starting at arbitrary level and with arbitrary root
concatenation. All that remains is to determine the correct settings from
ID_AA64MMFR0_EL1.PARange for which we use a lookup table.
As well as supporting 44 and 48 bit addressing we can also reduce the order of
the first level for systems which support only 32 or 36 physical address bits,
saving a page.
Systems with 42-bits are an interesting case, since they only support 3 levels
of paging, implying that 8 pages are required at the root level. So far I am
not aware of any systems with peripheral located so high up (the only 42-bit
system I've seen has nothing above 40-bits), so such systems remain configured
for 40-bit IPA with a pair of pages at the root of the p2m.
Switching to symbolic names for the VTCR_EL2 bits as we go improves the clarity
of the result.
Parts of this are derived from "xen/arm: Add 4-level page table for
stage 2 translation" by Vijaya Kumar K.
arm32 remains with the static 3-level, 2 page root configuration.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
This only affects Xen's own stage one paging.
- Use symbolic names for TCR bits for clarity.
- Update PADDR_BITS
- Base field of LPAE PT structs is now 36 bits (and therefore
unsigned long long for arm32 compatibility)
- TCR_EL2.PS is set from ID_AA64MMFR0_EL1.PASize.
- Provide decode of ID_AA64MMFR0_EL1 in CPU info
Parts of this are derived from "xen/arm: Add 4-level page table for
stage 2 translation" by Vijaya Kumar K.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
This paves the way for boot-time selection of the number of levels to
use in the p2m, which is required to support both 40-bit and 48-bit
systems. For now the starting level remains a compile time constant.
Implemented by turning the linear sequence of lookups into a loop.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Currently we retain the hardcoded values but soon we will want to calculate the
correct values based upon the CPU properties common to all processors, which
are only available once they are all up.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
This file is where most of the P2M logic lives and this function will
eventually need to poke at some internals, so move it.
This is pure code motion.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
ARM allows for the concatenation of pages at the root of a p2m (but not a
regular page table) in order to support a larger IPA space than the number of
levels in the P2M would normally support. We use this to support 40-bit guest
addresses.
Previously we were unable to dump IPAs which were outside the first page of the
root. To fix this we adjust dump_pt_walk to take the machine address of the
page table root instead of expecting the caller to have mapped it. This allows
the walker code to select the correct page to map.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
This allows us to correctly dump 64-bit hypervisor addresses, which use a 4
level table.
It also paves the way for boot-time selection of the number of levels to use in
the p2m, which is required to support both 40-bit and 48-bit systems.
To support multiple levels it is convenient to recast the page table walk as a
loop over the levels instead of the current open coding.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
This was previously part of Vijaya's "xen/arm: Add 4-level page table
for stage 2 translation" but is split out here to make that patch
easier to read.
I went with ->root rather than ->root_level as the original did.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Julien Grall <julien.grall@linaro.org>
Cc: Vijaya Kumar K <Vijaya.Kumar@caviumnetworks.com>
In verify mode, we map the guest memory, and the guest page is
region_base + i * PAGE_SIZE. So we should csum page (region_base
+ i * PAGE_SIZE), not (region_base + (i+curbatch) * PAGE_SIZE)
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
apply_batch() only handles MAX_BATCH_SIZE pages at one time. If
there is some bogus/unmapped/allocate-only/broken page, we will
skip it. So when we call apply_batch() again, the first page's
index is curbatch - invalid_pages. invalid_pages stores the number
of bogus/unmapped/allocate-only/broken pages we have found.
In many cases, invalid_pages is 0, so we don't catch this error.
Signed-off-by: Hong Tao <bobby.hong@huawei.com>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Update libfdt to v1.4.0 of libfdt taken from git://git.jdl.com/software/dtc.git
Xen changes to libfdt_env.h carried over from existing libfdt (v1.3.0)
This update provides the fdt_create_empty_tree() function used by the ARM
EFI boot code.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
__flush_dcache_all added from arch/arm64/mm/cache.S, with helper macros from
arch/arm64/include/asm/assembler.h, from v3.16. The cache flushing is required
when transitioning from EFI code that runs with cache enable to Xen startup
code which expects the cache to be disabled.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed indent on ENTRY() and dropped the entry point label which
duplicates the one from the macro. ]
This extends commit d6cb14b34f ("VT-d: suppress UR signaling for
desktop chipsets") as per the finally obtained list of affected
chipsets from Intel.
Also pad the IDs we had listed there before to full 4 hex digits.
This is CVE-2013-3495 / XSA-59.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Yang Zhang <yang.z.zhang@intel.com>
In a scenario where a page fault that triggered a mem_event occured,
p2m_mem_access_check() will now be able to either 1) emulate the
current instruction, or 2) emulate it, but don't allow it to perform
any writes.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Vmx_disable_intercept_for_msr() will now refuse to disable interception of
MSRs needed for memory introspection. It is not possible to gate this on
mem_access being active for the domain, since by the time mem_access does
become active the interception for the interesting MSRs has already been
disabled (vmx_disable_intercept_for_msr() runs very early on).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Tim Deegan <tim@xen.org>
Speed optimization for introspection purposes: a handful of registers
are sent along with each mem_event. This requires enlargement of the
mem_event_request / mem_event_response stuctures, and additional code
to fill in relevant values. Since the EPT event processing code needs
more data than CR3 or MSR event processors, hvm_mem_event_fill_regs()
fills in less data than p2m_mem_event_fill_regs(), in order to avoid
overhead. Struct hvm_hw_cpu has been considered instead of the custom
struct mem_event_regs_st, but its size would cause quick filling up
of the mem_event ring buffer.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Tim Deegan <tim@xen.org>
Added support for emulating an instruction with no memory writes.
Additionally, introduced hvm_emulate_one_full(), which inspects
possible return values from the hvm_emulate_one() functions
(EXCEPTION, UNHANDLEABLE) and acts on them.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Mass wakeups (via vlapic_ipi()) can take enormous amounts of time,
especially when many of the remote pCPU-s are in deep C-states. For
64-vCPU Windows Server 2012 R2 guests on Ivybridge hardware,
accumulated times of over 2ms were observed (average 1.1ms).
Considering that Windows broadcasts IPIs from its timer interrupt,
which at least at certain times can run at 1kHz, it is clear that this
can't result in good guest behavior. In fact, on said hardware guests
with significantly beyond 40 vCPU-s simply hung when e.g. ServerManager
gets started.
This isn't just helping to reduce the number of ICR writes when the
host APICs run in clustered mode, it also reduces them by suppressing
the sends altogether when - by the time
cpu_raise_softirq_batch_finish() is reached - the remote CPU already
managed to handle the softirq. Plus - when using MONITOR/MWAIT - the
update of softirq_pending(cpu), being on the monitored cache line -
should make the remote CPU wake up ahead of the ICR being sent,
allowing the wait-for-ICR-idle latencies to be reduced (perhaps to a
large part due to overlapping the wakeups of multiple CPUs).
With this alone (i.e. without the IPI avoidance patch in place),
average broadcast times for a 64-vCPU guest went down to a measured
maximum of 310us. With that other patch in place, improvements aren't
as clear anymore (short term averages only went down from 255us to
250us, which clearly is within the error range of the measurements),
but longer term an improvement of the averages is still visible.
Depending on hardware, long term maxima were observed to go down quite
a bit (on aforementioned hardware), while they were seen to go up
again on a (single core) Nehalem (where instead the improvement on the
average values was more visible).
Of course this necessarily increases the latencies for the remote
CPU wakeup at least slightly. To weigh between the effects, the
condition to enable batching in vlapic_ipi() may need further tuning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Mass wakeups (via vlapic_ipi()) can take enormous amounts of time,
especially when many of the remote pCPU-s are in deep C-states. For
64-vCPU Windows Server 2012 R2 guests on Ivybridge hardware,
accumulated times of over 2ms were observed (average 1.1ms).
Considering that Windows broadcasts IPIs from its timer interrupt,
which at least at certain times can run at 1kHz, it is clear that this
can't result in good guest behavior. In fact, on said hardware guests
with significantly beyond 40 vCPU-s simply hung when e.g. ServerManager
gets started.
Recognizing that writes to softirq_pending() already have the effect of
waking remote CPUs from MWAITing (due to being co-located on the same
cache line with mwait_wakeup()), we can avoid sending IPIs to CPUs we
know are in a (deep) C-state entered via MWAIT.
With this, average broadcast times for a 64-vCPU guest went down to a
measured maximum of 255us (which is still quite a lot).
One aspect worth noting is that cpumask_raise_softirq() gets brought in
sync here with cpu_raise_softirq() in that now both don't attempt to
raise a self-IPI on the processing CPU.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
In colo mode, secondary vm is running, so VM_ENTRY_INTR_INFO may
valid before restoring vmcs. If there is no pending event after
restoring vm, we should clear it.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Also clear pending software exceptions.
Copy the fix to SVM as well.
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Aravind Gopalakrishnan <Aravind.Gopalakrishnan@amd.com>
As we've already generated a JSON config for Dom0, print that out when
requested.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Before this change, xl stores domain configuration in "xl" format, which
is in fact a verbatim copy of user supplied domain config.
Now libxl provides a new API to retrieve domain configuration, switch to
that new API, store configuration in JSON format.
Tests done so far (xl.{new,old} denotes xl with{,out} "libxl-json"
support):
1. xl.new create then xl.new save, hexdump saved file: domain config
saved in JSON format
2. xl.new create, xl.new save then xl.old restore: failed on
mandatory flag check
3. xl.new create, xl.new save then xl.new restore: succeeded
4. xl.old create, xl.old save then xl.new restore: succeeded
5. xl.new create then local migrate, receiving end xl.new: succeeded
6. xl.old create then local migrate, receiving end xl.new: succeeded
Note that "xl" config is still supported and handled when restarting a
domain. "xl" config file takes precedence over "libxl-json" in that
case, so that user who uses "config-update" to store new config file
won't have regression. All other scenarios (migration, domain listing
etc.) now use the new API.
Lastly, print out warning when users invoke "config-update" to
discourage them from using this command.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This will be used in later patch for xl to remove its "xl" userdata
file.
Both CTX lock and userdata lock are taken in this API. CTX lock is taken
to maintain locking hierarchy, but it also has a side effect to protect
against R-M-W by other threads. Userdata lock is used to protect against
domain destruction.
In general application should not rely on these internal locks to
protect its own userdata files. It should deploys its own lock if it
cares.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a new public API to return domain configuration. This returned
configuration can be used to rebuild a domain.
Note that this configuration only describes the configuration necessary
to reproduce the guest visible state and does not necessarily include
specific decisions made by the toolstack regarding its current
incarnation (e.g. disk backend) unless they were specified by the
application when the domain was created.
With this approach we can preserve what user has provided in the
original configuration as well as valuable information from xenstore.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Introduce a helper function which can return both "target" node and
"static-max" node of a domain. Reimplement libxl_get_memory_target using
this helper. libxl__fill_dom0_memory_info is adjusted as well.
This helper will be used in later patch.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We introduce an intermediate empty state when inserting media into
CDROM. The scheme works like this:
lock json config
write empty state to xenstore
for (;;) {
write user supplied disk to JSON
write disk information to xenstore
}
unlock json config
Bear in mind that all steps can fail. With the proposed scheme, we now
know, if xenstore is empty, then CDROM should be considered empty;
otherwise we should use JSON version of CDROM configuration.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
We update JSON version first, then write to xenstore, so that we
maintain the following invariant: any device which is present in
xenstore has a corresponding entry in JSON.
The workflow is as followed:
lock json config
read json config
update in-memory json config with new entry, replacing
any stale entry
for loop
open xs transaction
check device existence, abort if it exists
write in-memory json config to disk
commit xs transaction
end for loop
unlock json config
Please see comment in libxl_internal.h for correctness proof.
As those routines are called both during domain creation and device
hotplug, we add a flag to indicate whether we need to update JSON
config. This flag is only set to true when we hotplug a device. We
cannot update JSON config during domain creation as JSON config is
committed to disk only when domain creation finishes.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Olaf Hering
Ian Campbell
Ian Campbell
Wen Congyang
Hong Tao
Roy Franz
Jan Beulich
Razvan Cojocaru
Tamas K Lengyel
Wei Liu