The xc_psr_* functions expect the type to be xc_psr_cat_type instead of
libxl_psr_cbm_type, so do the conversion.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Or else clang complains with:
implicit conversion from enumeration type 'yajl_gen_status' to different
enumeration type 'yajl_status' [-Werror,-Wenum-conversion]
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: remove extraneous ";" ]
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Since it's unsafe to code it as a function because it would end up passing a
non literal string to a printf like function.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Fix errors like:
/local/work/xen.git/dist/install/usr/local/include/libxl_uuid.h:59:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
void static inline libxl_uuid_copy_0x040400(libxl_uuid *dst,
^
/local/work/xen.git/dist/install/usr/local/include/libxl_uuid.h:59:1: error: 'inline' is not at beginning of declaration [-Werror=old-style-declaration]
/local/work/xen.git/dist/install/usr/local/include/libxl.h:1233:1: error: 'static' is not at beginning of declaration [-Werror=old-style-declaration]
int static inline libxl_domain_create_restore_0x040200(
^
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
c/s f5d947bf1b "tools/libxl: add back channel support to read stream"
made a bogus adjustment to libxl__stream_read_start(), including
removing the comment hinting at what was going on, which breaks
conversion of a legacy migration stream.
Symptoms look like:
root@anonymi:~ # xl migrate domU host
migration target: Ready to receive domain.
Saving to migration stream new xl format (info 0x1/0x0/2677)
xc: error: error polling suspend notification channel: -1: Internal error
Loading new save file <incoming migration stream> (new xl fmt info 0x1/0x0/2677)
Savefile contains xl domain config in JSON format
Parsing config from <saved>
libxl: error: libxl_stream_read.c:327:stream_header_done: Invalid ident: expected 0x4c6962786c466d74, got 0x01f00f0000000000
libxl: error: libxl_utils.c:430:libxl_read_exactly: file/stream truncated reading ipc msg header from domain 1 save/restore helper stdout pipe
The adjustment is not required for backchannel support (as there is no
interaction between back channels and legacy conversion), and caused
stream->fd to be latched in the datacopier before legacy conversion
substitutes it for the fd which is the output of the conversion script.
This causes libxl to consume data from the legacy stream rather than the
v2 stream, and for the conversion script to encounter an error as the
legacy stream appears to skip ahead.
Undo the adjustments to libxl__stream_read_start(), and introduce a
better description of what is going on. Introduce some extra assertions
to try and catch similar breakage in the future.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
c/s d5c693d "libxl/save: Refactor libxl__domain_suspend_state" broke soft
reset as libxl__domain_suspend_device_model() now fails when domid in not set
in libxl__domain_suspend_state.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Later changes (Patch titled "tools/libxc: Use featuresets rather than
guesswork") will cause the cpuid generation logic to seed their
information from a featureset. This patch adds the infrastructure to
specify a featureset, and will obtain the appropriate defaults from Xen
if omitted.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is a partial revert of 612f15, that allowed CDROM devices to use the
'phy' PV backend. Due to limitations in the current implementation of the
libxl_cdrom_insert function, the PV backend used in conjunction with an
emulated CDROM device must always be Qdisk at the moment. This is due to
libxl_cdrom_insert not running disk hotplug scripts on plug and unplug of PV
CDROM backends (and possibly other yet to be identified issues).
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is needed because the cd-{insert/eject} functions are not prepared to
deal with blkback, which would be used by default if no backend was
specified.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
So libxl doesn't have to pass the build info around just to get the device
model used by the guest. This allows to simplify
libxl__device_nic_setdefault.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
create_domain() is of uint32_t return type, because on
success it returns the domid of the new domain, and
uint32_t is what we typically use for domid-s.
However, on failure, it returns ERROR_FAIL or ERROR_INVAL,
which are -3 and -6. Callers assign the return value to an
'int rc' variable and then check for '(rc < 0)'.
Although things work, and no tool (compiler, Coverity, ecc.)
is complaining, using 'int' as return type seems better.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
by making them more consistent with other examples in xl.
Affected functions are the ones related to console, vnc,
dump, destroy, shutdown, list, domid and domname.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Dario Fagggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
by making them more consistent with other examples in xl.
While there, make freemem() of boolean return type, which
looks more natural, and add comment explaining why
parse_mem_size_kb() needs to diverge from the pattern.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The internals of the uuid_t struct don't match a big endian octet stream on
*BSD systems, which means that it cannot be directly casted to a
uint8_t[16].
In order to solve that change the type to be an unsigned char[16], which
doesn't imply any other change on Linux. On *BSDs change the helpers so that
the uuid is always stored as a big endian byte stream.
NB: tested on FreeBSD and Linux only.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Discussed-with: Ian Jackson <Ian.Jackson@eu.citrix.com>
Discussed-with: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The fields that are printed might not be set in the case of a failure, which
generates a segmentation fault.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This code is extracted from the FreeBSD blkfront implementation.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The current code in libxl assumed that vdev is equal to local device, but
this is only true for Linux systems. In other OSes the local device can use
a nomenclature completely different from the virtual device one.
Move the current libxl__devid_to_localdev Linux implementation out of the
OS-specific file and rename it to libxl__devid_to_vdev, and then make sure
local_device_attach_cb return the local device in the diskpath field.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This factors out the nic hotplug specific code from the common code path in
order to make it easier to add support for disk hotplug scripts. It
shouldn't include any functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Netlink is required when initialising COLO, so make sure only to compile
COLO only when netlink is available. Change the inclusion of
linux/netlink.h to netlink/netlink.h so that it doesn't use Linux kernel
header directly.
Provide necessary stub functions in case COLO is disabled. This should
fix build on FreeBSD because there is no netlink there. It would also
make libxl build properly when netlink is not present on a Linux
system.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
COLO and Remus net buffer support both depend on the availability of
libnl. Use a generic name.
No functional changes.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
They are only used there, no need to expose them to other parts of
libxl.
This is necessary to make libxl build on FreeBSD again because FreeBSD
doesn't have netlink.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We need to separate COLO code from common code as clean as possible.
With this patch, all COLO structures are now in libxl_colo.h.
It does the following:
1. Move two typedefs for libxl__domain_create_state{,cb} back to
libxl_internal.h.
2. Move libxl__colo_save_state to libxl_colo.h.
3. Include libxl_internal.h in libxl_colo.h.
4. Move a bunch of colo typedefs to the top of libxl_internal.h.
5. Move the inclusion of libxl_colo.h to the right place in
libxl_internal.h.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a service routine checking whether a device model must be started
after adding a device to a domain.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add an internal service function to check for a running device model.
This can be used later when adding devices to a domain requiring a
device model for either printing an error message or starting the
device model in case it is not already running.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a new pvusb backend type "qusb" which is provided by qemu. It can
be selected either by specifying the type directly in the configuration
or it is selected automatically by libxl in case there is no "usbback"
driver loaded.
The "qusb" backend is a full replacement for the kernel based backend
"vusb". The interface to the frontend is the very same including all
Xenstore paths, while the backend paths in Xenstore differ ("qusb"
instead ov "vusb").
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a function to query whether the device model is supporting a
specific backend type. The device model is writing the supported
backend types to Xenstore on startup. The new query function checks
for the appropriate entry to be present.
As not all versions of qemu are capable to indicate support of
specific backends the query function is to be called with an indicator
whether the default return value should be "supported" (in case qemu
doesn't know set any support information) or "not supported".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
libxl__need_xenpv_qemu() is called with configuration data for console,
vfbs, disks and channels today in order to evaluate the need for
starting a device model for a pv domain.
The console data is local to the caller and setup in a way to never
require a device model. All other data is taken from the domain config
structure.
In order to support other device backends via qemu change the interface
of libxl__need_xenpv_qemu() to take the domain config structure as
input instead of the single device arrays.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In case libxl__need_xenpv_qemu() returns an error let domain creation
fail.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It takes a bit of thinking to parse the original statement. It looks
like it is missing an ',' - right after the 'braced' to make it
obvious that:
if (X)
return XYZ;
is OK, while multiple conditionals require braces.
Changing the 'apart from' with 'except' makes it more obvious
(I hope).
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Konrad Rzeszutek Wilk
Roger Pau Monne
Wei Liu
Andrew Cooper
Vitaly Kuznetsov
Dario Faggioli
Harmandeep Kaur
Chunyan Liu
Ian Jackson
Chong Li
Juergen Gross