Libraries have no buisness using stdout directly, and these have no real
value. Dropping them removes the following output when building a PVH guest:
[root@fusebot ~]# xl create shim.cfg
Parsing config from shim.cfg
S3 disabled
S4 disabled
CONV disabled
[root@fusebot ~]#
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This allows the section contents to be disassembled without going
through any extra hoops, simplifying the analysis of problems in test
and/or emulation code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Yes, recent AMD CPUs don't support them anymore, but I think we should
nevertheless cope.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This reverts commit b435014517.
Due to the implementation of cc-option, the check is always true,
which means build for gcc that doesn't have -Og support is broken.
This patch can be reapplied once we have fixed cc-option.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Since version 2.10, QEMU will lock the disk images so a second QEMU
instance will not try to open it. This would prevent live migration from
working correctly. A new parameter as been added to the QMP command
"xen-save-devices-state" in QEMU version 2.11 which allow to unlock the
disk image for a live migration, but also keep it locked for a snapshot.
QEMU commit: 5d6c599fe1d69a1bf8c5c4d3c58be2b31cd625ad
"migration, xen: Fix block image lock issue on live migration"
The extra "live" parameter can only be use if QEMU knows about it, so
only add it if qemu is recent enough.
The struct libxl__domain_suspend_state as now knowledge if the suspend
is part of a live migration.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On connection to QEMU via QMP, the version of QEMU is provided, store it
for later use.
Add a function qmp_qemu_check_version that can be used to check if QEMU
is new enough for certain fonctionnality. This will be used in a moment.
As it's a static function, it is commented out until first use, which is
in the next patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
XSA-256 forces the local APIC to always be enabled for PVH guests, so
ignore any apic option for PVH guests. Update the documentation
accordingly.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
With gcc optimization enabled by:
tools: detect appropriate debug optimization level
b435014517
-Wformat-truncation throws warnings
gcc version 7.3.0
xenalyze.c: In function 'find_symbol':
xenalyze.c:382:36: error: 'snprintf' output may be truncated before the last format character [-Werror=format-truncation=]
snprintf(name, 128, "(%s +%llx)",
^
xenalyze.c:382:5: note: 'snprintf' output between 6 and 144 bytes into a destination of size 128
snprintf(name, 128, "(%s +%llx)",
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
lastname, offset);
~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
Signed-off-by: John Thomson <git@johnthomson.fastmail.com.au>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Xen built with ocaml 4.06 gives errors such as
Error: This expression has type bytes but an expression was
expected of type string
as Byte and safe-strings which were introduced in 4.02 are the
default in 4.06.
This patch which is partly by Richard W.M. Jones of Red Hat
from https://bugzilla.redhat.com/show_bug.cgi?id=1526703
fixes these issues.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Christian Lindig<christian.lindig@citrix.com>
When building debug use -Og as the optimization level if its available,
otherwise retain the use of -O0. -Og has been added by GCC to enable all
optimizations that to not affect debugging while retaining full
debugability.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently with the native tool chain on Debian Jessie ./test_x86_emulator
yields:
Testing AVX2 256bit single native execution...okay
Testing AVX2 256bit single 64-bit code sequence...[line 933] failed!
The bug is that libc's memcpy() in read() uses %xmm8 (specifically, in
__memcpy_sse2_unaligned()), which corrupts %ymm8 behind the back of the AVX2
test code.
Introduce wrappers (and machinery to forward calls to those wrappers)
saving/restoring FPU state around certain library calls.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-and-tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce common helpers for saving and restoring FPU state. During
emul_test_init(), calculate whether to use xsave or fxsave, and tweak the
existing mxcsr_mask logic to avoid using another large static buffer.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Commit 448c03b3cb ("tools/xenstore: try to get minimum thread
stack size for watch thread") added a dependency to libdl to
libxenstore.
Add the needed flags to LDLIBS_libxenstore and the pkg-config file of
libxenstore.
Fixes: 448c03b3cb
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
It is only xenstored which uses libsystemd. Avoid having libxenstore pull
libsystemd into the address space of all of its users.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When creating a GICv3 devicetree node, we currently insert the
redistributor-stride and #redistributor-regions properties, with fixed
values which are actually the architected ones. Since those properties are
optional, and in the case of the stride only needed to cover for broken
platforms, we don't need to describe them if they don't differ from the
default values. This will always be the case for our constructed
DomU memory map.
So we drop those properties altogether and provide a clean and architected
GICv3 DT node for DomUs.
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Reviewed-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
I.e. those not being equivalents of SSEn ones, but with the exception
of the various gather operations.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When creating a pthread in xs_watch() try to get the minimal needed
size of the thread from glibc instead of using a constant. This avoids
problems when the library is used in programs with large per-thread
memory.
Use dlsym() to get the pointer to __pthread_get_minstack() in order to
avoid linkage problems and fall back to the current constant size if
not found.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Jim Fehlig <jfehlig@suse.com>
The maximum size for the input size was set to INPUT_SIZE, which is actually
the size of the data array inside the fuzz_corpus structure and so was not
abling user (or AFL) to fill in the whole structure. Changing to
sizeof(struct fuzz_corpus) correct this problem.
Signed-off-by: Paul Semel <semelpaul@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Curl and xml2 are not required anymore since 185bb58be3 ("tools: drop
libxen") removed their only user.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[ wei: run autogen.sh ]
Applications like libvirt may not populate a device devid field,
delegating that to libxl. If needed, the application can later
retrieve the libxl-produced devid. Indeed most devices are handled
this way in libvirt, channel devices included.
This works well when only one channel device is defined, but more
than one results in
qemu-system-i386: -chardev socket,id=libxl-channel-1,\
path=/tmp/test-org.qemu.guest_agent.00,server,nowait:
Duplicate ID 'libxl-channel-1' for chardev
Besides the odd '-1' value in the id, multiple channels have the same
id, causing qemu to fail. A simple fix is to set an uninitialized
devid (-1) to the dev_num passed to libxl__init_console_from_channel().
Signed-off-by: Jim Fehlig <jfehlig@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Backend domain may be independently destroyed - there is no
synchronization of libxl structures (including /libxl tree) elsewhere.
Backend might also remove the device info from its backend xenstore
subtree on its own.
We have various cases (not comprehensive list):
- both frontend and backend operational: after setting
be/state=XenbusStateClosing backend wait for frontend confirmation
and respond with be/state=XenbusStateClosed; then libxl in dom0
remove frontend entries and libxl in backend domain (which may be the
same) remove backend entries
- unresponsive backend/frontend: after a timeout, force=1 is used to remove
frontend entries, instead of just setting
be/state=XenbusStateClosing; then wait for be/state=XenbusStateClosed.
If that timeout too, remove both frontend and backend entries
- backend gone, with this patch: no place for setting/waiting on
be/state - go directly to removing frontend entries, without waiting
for be/state=XenbusStateClosed (this is the difference vs force=1)
Without this patch the end result is similar, both frontend and backend
entries are removed, but in case of backend gone:
- libxl waits for be/state=XenbusStateClosed (and obviously timeout)
- return value from the function signal an error, which for example
confuse libvirt - it thinks the device remove failed, so is still
there
If such situation is detected, do not fail the removal, but finish the
cleanup of the frontend side and return 0.
This is just workaround, the real fix should watch when the device
backend is removed (including backend domain destruction) and remove
frontend at that time. And report such event to higher layer code, so
for example libvirt could synchronize its state.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
I have no idea what *.1 is meant to cover. Instead also exclude
preprocessed and non-source assembly files.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
I have no idea what *.d1 is supposed to refer to - we only have .*.d
and .*.d2 files (note also the leading dot). Also switch to passing
-name instead of -path to find - that's a requirement for .*.d et al to
work, but would probably have been better from the beginning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Commit 119ee4d773 ("tools/libxc: Tolerate specific zero-content records
in migration v2 streams") meant tolerate those, but failed to set rc
accordingly.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
At the moment, Xen provides virtual PSCI interface compliant with 0.1
and 0.2. Since them, the specification has been updated and the latest
version is 1.1 (see ARM DEN 0022D).
>From an implementation point of view, only PSCI_FEATURES is mandatory.
The rest is optional and can be left unimplemented for now.
At the same time, the compatible for PSCI node have been updated to
expose "arm,psci-1.0".
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: mirela.simonovic@aggios.com
There's no need to have shim specific targets, so just use the regular
xen makefile targets in order to build the shim binary.
When the shim is build as part of the firmware directory install the
stripped Xen binary to the firmware directory and place a binary with
symbols in the debug directory.
The objcopy step of the shim build is also removed in this patch:
since the shim is booted in PVH mode there's no need for the resulting
binary to be in elf32 format. Xen can load PVH kernels with either a
32 or 64bit elf header.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With gcc 7.3.0, the build fails like this:
src/xenstat_linux.c: In function ‘getBridge’
src/xenstat_linux.c:78:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 241 [-Wformat-overflow=]
sprintf(tmp, "/sys/class/net/%s/bridge", de->d_name);
^~
src/xenstat_linux.c:78:5: note: ‘sprintf’ output between 23 and 278 bytes into a destination of size 256
sprintf(tmp, "/sys/class/net/%s/bridge", de->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix by making the buffer bigger.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
"mkdir -p" reports a missing operand, as config/ has no subdirs. Oddly
enough this doesn't cause the whole command (and hence the build to
fail), despite the "set -e" now covering the entire set of commands -
perhaps a quirk of the relatively old bash I've seen this with (a few
simple experiments suggest that commands inside () producing a non-
success status would exit the inner shell, but not the outer one).
Add a dummy . argument to the invocation.
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
"set -e" on a separate Makefile line is meaningless. Glue together all
the lines that this is supposed to cover.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The "special pages" for PVH guests include the frames for console and
Xenstore ring buffers. Those have to be marked as "Reserved" in the
guest's E820 map, as otherwise conflicts might arise later e.g. when
hotplugging memory into the guest.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 96edb111dd ("libxc: panic when trying to create a PVH guest
without kernel support") already improved the handling of non PVH
capable kernels. But xc_dom_parse_elf_kernel() still returned success on
invalid elf images and the domain build only failed later. Now the build
process will fail immediately on detecting the error.
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
xc_dom_parse_image() does not set errno (at least in many code paths).
So LOGE() is not useful.
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Changed the error message when trying to map a null size file.
When doing `xl create` command, we get an Invalid Kernel error
when the file size is greater than zero. For zero length files, we are
falling in the mmap error, and we get an `Invalid parameter` error,
which is not explicit. With this change, we get a `zero length file`
error.
Signed-off-by: Paul Semel <semelpaul@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
To stay in line with other parts of the ocaml code base.
This requires committing a bunch of mli files in tree.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
So it can be used by both gcc and clang. Just add the Kconfig option
and modify the makefiles so the llvm coverage specific code can be
added in a follow up patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[jb: also change the shim config]
The ocaml safe-strings patch uses code introduced in ocaml 4.02
so update the minimal version.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Xen built with ocaml 4.06 gives errors such as
Error: This expression has type bytes but an expression was
expected of type string
as Byte and safe-strings which were introduced in 4.02 are the
default in 4.06.
This patch which is mostly by Richard W.M. Jones of Red Hat
from https://bugzilla.redhat.com/show_bug.cgi?id=1526703
fixes these issues.
v2: drop tools/ocaml/libs/xc/xenctrl.ml from the patch as the
affected code was removed by commit d933f1a53c
tools/ocaml: Drop coredump infrastructure
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
[ wei: remove trailing whitespaces ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
This is for the proposal "Allow setting up shared memory areas between VMs
from xl config file". See:
https://lists.xen.org/archives/html/xen-devel/2017-08/msg03242.html
Then plan is to use XENMEM_add_to_physmap_batch to map the shared pages from
one domU to another and use XENMEM_remove_from_physmap to cancel the sharing.
A wrapper to XENMEM_add_to_physmap_batch was added in the following commit:
commit 20e725e936
Now add the wrapper to XENMEM_remove_from_physmap.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On exit, xen-access did not unsubscribe from CR4 write vm_events,
potentially leaving the guest stuck.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
At least Linux kernels have been able to work with gzip-ed initrd for
quite some time; initrd compressed with other methods aren't even being
attempted to unpack. Furthermore the unzip-ing routine used here isn't
capable of dealing with various forms of concatenated files, each of
which was gzip-ed separately (it is this particular case which has been
the source of observed VM creation failures).
Hence, if unpacking fails, simply hand the compressed blob to the guest
as is.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Andrew Cooper