The build container will be used for a new Alpine Linux 3.12 arm64 build
test.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
QEMU upstream builds with warnings when libc is musl:
#warning redirecting incorrect #include <sys/signal.h> to <signal.h>
Disable -Werror by passing --disable-werror to the QEMUU config script
if libc is musl.
hvmloader doesn't build on musl systems today. Disable any guest
firmware build.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Add a trivial dom0less test:
- fetch the Debian arm64 kernel and use it ad dom0/U kernel
- use busybox-static to create a trivial dom0/U ramdisk
- use ImageBuilder to generate the uboot boot script automatically
- install and use u-boot from the Debian package to start the test
- binaries are loaded from uboot via tftp
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
Use QEMU to start Xen (just the hypervisor) up until it stops because
there is no dom0 kernel to boot.
It is based on the existing build job unstable-arm64v8.
Also use make -j$(nproc) to build Xen.
Signed-off-by: Stefano Stabellini <stefano.stabellini@xilinx.com>
Acked-by: Wei Liu <wl@xen.org>
In order to better support resource allocation and locking for dynamic
hypfs nodes add enter() and exit() callbacks to struct hypfs_funcs.
The enter() callback is called when entering a node during hypfs user
actions (traversing, reading or writing it), while the exit() callback
is called when leaving a node (accessing another node at the same or a
higher directory level, or when returning to the user).
For avoiding recursion this requires a parent pointer in each node.
Let the enter() callback return the entry address which is stored as
the last accessed node in order to be able to use a template entry for
that purpose in case of dynamic entries.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
The node specific write functions take a void user address handle as
parameter. As a write won't change the user memory use a const_void
handle instead.
This requires a new macro for casting a guest handle to a const type.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When moving a domain between cpupools with different scheduling
granularity the sched_units of the domain need to be adjusted.
Do that by allocating new sched_units and throwing away the old ones
in sched_move_domain().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dfaggioli@suse.com>
domain->remote_port and restore_existing_connections() are useless and
can be removed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
set_tdb_key() can be used by destroy_node(), too. So remove the static
attribute and move it to xenstored_core.c.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
When xenstored crashes due to an unrecoverable condition it is calling
either barf() or barf_perror() to issue a message and then exit().
Make sure the message is visible somewhere by using syslog()
additionally to xprintf(), as the latter will be visible only with
tracing active.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
On the Cortex A53, when executing in AArch64 state, a load or store instruction
which uses the result of an ADRP instruction as a base register, or which uses
a base register written by an instruction immediately after an ADRP to the
same register, might access an incorrect address.
The workaround is to enable the linker flag --fix-cortex-a53-843419
if present, to check and fix the affected sequence. Otherwise print a warning
that Xen may be susceptible to this errata
Signed-off-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Bertrand Marquis <bertrand.marquis@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
As of 005de45c88 ("xen: do live patching only from main idle loop")
the comment ahead of livepatch_do_action() has been stale.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Invoking check_wakeup_from_wait() from assembly allows the new
continue_pv_domain() to replace the prior continue_nonidle_domain() as
the tail hook, eliminating an extra reset_stack_and_jump().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
In order to have the same effect on registers as a call to
check_for_livepatch_work() may have, clobber all call-clobbered
registers in debug builds.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
This patch adds a 'name' field into the idl for 'libxl_device_pci' and
libxlu_pci_parse_spec_string() is modified to parse the new 'name'
parameter of PCI_SPEC_STRING detailed in the updated documention in
xl-pci-configuration(5).
If the 'name' field is non-NULL then both libxl_device_pci_add() and
libxl_device_pci_remove() will use it to look up the device BDF in
the list of assignable devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Since assignable devices can be named, a subsequent patch will support use
of a PCI_SPEC_STRING containing a 'name' parameter instead of a 'bdf'. In
this case the name will be used to look up the 'bdf' in the list of assignable
(or assigned) devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch converts libxl to use libxl_pci_bdf_assignable_add/remove/list/
list_free() rather than libxl_device_pci_assignable_add/remove/list/
list_free(), which then allows naming of assignable devices to be supported.
With this patch applied 'xl pci-assignable-add' will take an optional '--name'
parameter, 'xl pci-assignable-remove' can be passed either a BDF or a name and
'xl pci-assignable-list' will take a optional '--show-names' flag which
determines whether names are displayed in its output.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
which support naming and use 'libxl_pci_bdf' rather than 'libxl_device_pci',
as replacements for libxl_device_pci_assignable_add/remove/list/list_free().
libxl_pci_bdf_assignable_add() takes a 'name' parameter which is stored in
xenstore and facilitates two addtional functions added by this patch:
libxl_pci_bdf_assignable_name2bdf() and libxl_pci_bdf_assignable_bdf2name().
Currently there are no callers of these two functions. They will be added in
a subsequent patch.
libxl_device_pci_assignable_add/remove/list/list_free() are left in place
for compatibility but are re-implemented in terms of the newly introduced
functions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
A subsequent patch will introduce code to allow a name to be specified to
'xl pci-assignable-add' such that the assignable device may be referred to
by than name in subsequent operations.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch largely re-writes the code to parse a PCI_SPEC_STRING and enters
it via the newly introduced function. The new parser also deals with 'bdf'
and 'vslot' as non-positional paramaters, as per the documentation in
xl-pci-configuration(5).
The existing xlu_pci_parse_bdf() function remains, but now strictly parses
BDF values. Some existing callers of xlu_pci_parse_bdf() are
modified to call xlu_pci_parse_spec_string() as per the documentation in xl(1).
NOTE: Usage text in xl_cmdtable.c and error messages are also modified
appropriately.
As a side-effect this patch also fixes a bug where using '*' to specify
all functions would lead to an assertion failure at the end of
xlu_pci_parse_bdf().
Fixes: d25cc3ec93 ("libxl: workaround gcc 10.2 maybe-uninitialized warning")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and use in 'libxl_device_pci'
This patch is preparatory work for restricting the type passed to functions
that only require BDF information, rather than passing a 'libxl_device_pci'
structure which is only partially filled. In this patch only the minimal
mechanical changes necessary to deal with the structural changes are made.
Subsequent patches will adjust the code to make better use of the new type.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Acked-by: Nick Rosbrook <rosbrookn@ainfosec.com>
Currently the documentation completely fails to mention the existence of
PCI_SPEC_STRING. This patch tidies things up, specifically clarifying that
'pci-assignable-add/remove' take <BDF> arguments where as 'pci-attach/detach'
take <PCI_SPEC_STRING> arguments (which will be enforced in a subsequent
patch).
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and prepare for adding support for non-positional parsing of 'bdf' and
'vslot' in a subsequent patch.
Also document 'BDF' as a first-class parameter type and fix the documentation
to state that the default value of 'rdm_policy' is actually 'strict', not
'relaxed', as can be seen in libxl__device_pci_setdefault().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and put it into a new xl-pci-configuration(5) manpage, akin to the
xl-network-configration(5) and xl-disk-configuration(5) manpages.
This patch moves the content of the section verbatim. A subsequent patch
will improve the documentation, once it is in its new location.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... rather than an open-coded equivalent.
This patch tidies up the is_pci_in_array() function, making it take a single
'libxl_device_pci' argument rather than separate domain, bus, device and
function arguments. The already-available COMPARE_PCI() macro can then be
used and it is also modified to return 'bool' rather than 'int'.
The patch also modifies libxl_pci_assignable() to use is_pci_in_array() rather
than a separate open-coded equivalent, and also modifies it to return a
'bool' rather than an 'int'.
NOTE: The COMPARE_PCI() macro is also fixed to include the 'domain' in its
comparison, which should always have been the case.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... to be used by callers of libxl_device_pci_assignable_list().
Currently there is no API for callers of libxl_device_pci_assignable_list()
to free the list. The xl function pciassignable_list() calls
libxl_device_pci_dispose() on each element of the returned list, but
libxl_pci_assignable() in libxl_pci.c does not. Neither does the implementation
of libxl_device_pci_assignable_list() call libxl_device_pci_init().
This patch adds the new API function, makes sure it is used everywhere and
also modifies libxl_device_pci_assignable_list() to initialize list
entries rather than just zeroing them.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
A previous patch introduced libxl_device_pci_list_free() which should be used
by callers of libxl_device_pci_list() to properly dispose of the exported
'libxl_device_pci' types and the free the memory holding them. Whilst all
current callers do ensure the memory is freed, only the code in xl's
pcilist() function actually calls libxl_device_pci_dispose(). As it stands
this laxity does not lead to any memory leaks, but the simple addition of
.e.g. a 'string' into the idl definition of 'libxl_device_pci' would lead
to leaks.
This patch makes sure all callers of libxl_device_pci_list() can call
libxl_device_pci_list_free() by keeping copies of 'libxl_device_pci'
structures inline in 'pci_add_state' and 'pci_remove_state' (and also making
sure these are properly disposed at the end of the operations) rather
than keeping pointers to the structures returned by libxl_device_pci_list().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Use of this function is a very inefficient way to check whether a device
has already been assigned.
This patch adds code that saves the domain id in xenstore at the point of
assignment, and removes it again when the device id de-assigned (or the
domain is destroyed). It is then straightforward to check whether a device
has been assigned by checking whether a device has a saved domain id.
NOTE: To facilitate the xenstore check it is necessary to move the
pci_info_xs_read() earlier in libxl_pci.c. To keep related functions
together, the rest of the pci_info_xs_XXX() functions are moved too.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
The code currently checks explicitly whether the device is already assigned,
but this is actually unnecessary as assigned devices do not form part of
the list returned by libxl_device_pci_assignable_list() and hence the
libxl_pci_assignable() test would have already failed.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
For the purposes of re-binding a device to its previous driver
libxl__device_pci_assignable_add() writes the driver path into xenstore.
This path is then read back in libxl__device_pci_assignable_remove().
The functions that support this writing to and reading from xenstore are
currently dedicated for this purpose and hence the node name 'driver_path'
is hard-coded. This patch generalizes these utility functions and passes
'driver_path' as an argument. Subsequent patches will invoke them to
access other nodes.
NOTE: Because functions will have a broader use (other than storing a
driver path in lieu of pciback) the base xenstore path is also
changed from '/libxl/pciback' to '/libxl/pci'.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... to hold a pointer to the device.
There is already a 'pci' field in 'pci_add_state' so simply use that from
the start. This also allows the 'pci' (#3) argument to be dropped from
do_pci_add().
NOTE: This patch also changes the type of the 'pci_domid' field in
'pci_add_state' from 'int' to 'libxl_domid' which is more appropriate
given what the field is used for.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Both 'domid' and 'pci' are available in 'pci_remove_state' so there is no
need to also pass them as separate arguments.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Other parameters, such as 'msitranslate' and 'permissive' are dealt with
but 'rdm_policy' appears to be have been completely missed.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
Currently libxl__device_pci_add_xenstore() is broken in that does not
update the domain's configuration for the first device added (which causes
creation of the overall backend area in xenstore). This can be easily observed
by running 'xl list -l' after adding a single device: the device will be
missing.
This patch fixes the problem and adds a DEBUG log line to allow easy
verification that the domain configuration is being modified. Also, the use
of libxl__device_generic_add() is dropped as it leads to a confusing situation
where only partial backend information is written under the xenstore
'/libxl' path. For LIBXL__DEVICE_KIND_PCI devices the only definitive
information in xenstore is under '/local/domain/0/backend' (the '0' being
hard-coded).
NOTE: This patch includes a whitespace in add_pcis_done().
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
... devices.
Currently there is an assumption built into libxl__device_list() that device
backends are fully enumarated under the '/libxl' path in xenstore. This is
not the case for PCI backend devices, which are only properly enumerated
under '/local/domain/0/backend'.
This patch adds a new get_path() method to libxl__device_type to allow a
backend implementation (such as PCI) to specify the xenstore path where
devices are enumerated and modifies libxl__device_list() to use this method
if it is available. Also, if the get_num() method is defined then the
from_xenstore() method expects to be passed the backend path without the device
number concatenated, so this issue is also rectified.
Having made libxl__device_list() work correctly, this patch removes the
open-coded libxl_pci_device_pci_list() in favour of an evaluation of the
LIBXL_DEFINE_DEVICE_LIST() macro. This has the side-effect of also defining
libxl_pci_device_pci_list_free() which will be used in subsequent patches.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Reviewed-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wl@xen.org>
To improve naming consistency, replaces occurrences of 'pcidev' with 'pci'.
The only remaining use of the term should be in relation to
'libxl_domain_config' where there are fields named 'pcidevs' and 'num_pcidevs'.
Purely cosmetic. No functional change.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
The seemingly arbitrary use of 'pci' and 'pcidev' in the code in libxl_pci.c
is confusing and also compromises use of some macros used for other device
types. Indeed it seems that DEFINE_DEVICE_TYPE_STRUCT_X exists solely because
of this duality.
This patch purges use of 'pcidev' from the libxl internal code, but
unfortunately the 'pcidevs' and 'num_pcidevs' fields in 'libxl_domain_config'
are part of the API and need to be retained to avoid breaking callers,
particularly libvirt.
DEFINE_DEVICE_TYPE_STRUCT_X is still removed to avoid the special case in
libxl_pci.c but DEFINE_DEVICE_TYPE_STRUCT is given an extra 'array' argument
which is used to identify the fields in 'libxl_domain_config' relating to
the device type.
NOTE: Some of the more gross formatting errors (such as lack of spaces after
keywords) that came into context have been fixed in libxl_pci.c.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
There are no users left, xenpaging has its own variant.
The last user was removed with commit 11d0044a16
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wl@xen.org>
Allocate enough memory so that the returned pointer can be safely
accessed as an array of unsigned long.
The actual bitmap size in units of bytes, as returned by bitmap_size,
remains unchanged.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Wei Liu <wl@xen.org>
The different fixed limits for absolute and relative path lengths of
Xenstore nodes make it possible to create per-domain nodes via
absolute paths which are not accessible using relative paths, as the
two limits differ by 1024 characters.
Instead of this weird limits use only one limit, which applies to the
relative path length of per-domain nodes and to the absolute path
length of all other nodes. This means, the path length check is
applied to the path after removing a possible start of
"/local/domain/<n>/" with <n> being a domain id.
There has been the request to be able to limit the path lengths even
more, so an additional quota is added which can be applied to path
lengths. It is XENSTORE_REL_PATH_MAX (2048) per default, but can be
set to lower values. This is done via the new "-M" or "--path-max"
option when invoking xenstored.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
I have been the major contributor for C Xenstore the past few years.
Add me as a maintainer for tools/xenstore/.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wl@xen.org>
While indeed unnecessary for pv_ro_page_fault(), pv_map_ldt_shadow_page()
may run when guest user mode is active, and hence may need to switch to
the kernel page tables in order to retrieve an LDT page mapping.
Fixes: 9ff9705647 ("x86/mm: drop guest_get_eff_l1e()")
Reported-by: Manuel Bouyer <bouyer@antioche.eu.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Manuel Bouyer <bouyer@antioche.eu.org>
For evtchn_fifo_set_pending()'s check of the control block having been
set to be effective, ordering of respective reads and writes needs to be
ensured: The control block pointer needs to be recorded strictly after
the setting of all the queue heads, and it needs checking strictly
before any uses of them (this latter aspect was already guaranteed).
This is XSA-358 / CVE-2020-29570.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Stefano Stabellini