Add a parameter for the MMIO hole size when building a HVM domain.
This is useful for specifying a larger than normal MMIO hole to ensure
that no PCIe device's MMIO region overlaps with RAM in a guest's
physical address space. This is needed on certain systems with PCIe
switches with a broken ACS capability. On these systems, if a device
downstream of the switch attempts a DMA to a guest physical address
that overlaps with the MMIO region of another downstream device, then
the switch routes the transfer directly to the device and the read or
write never hits RAM.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
To allow new parameters to be added to the xc_hvm_build*() family of
functions, pass them in a structure. Make the other variants fill in
the structure and call xc_hvm_build() (except for xc_hvm_build_mem()
which had no users and is removed).
The units of the mem_size and mem_target arguments are in bytes (not
MiB like the old functions).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
If memcpy() and memmove() were used with source and destination of
different alignment then the result would be all jumbled.
When their implementations were imported from Linux some macros for
big-endian platforms were taken instead of the correct little-endian
ones (specifically, the push and pull macros in assembler.h).
Fix this by taking Linux's arch/include/asm/assembler.h as-is and
making only the minimum changes necessary for Xen.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Campbell <Ian.Campbell@citrix.com>
Setup memory management, heaps etc. using the location and size of the
first memory bank given in the device tree.
The DTB is also copied so it can be used afterwards.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Prior to setting up the page tables, parse the DTB for the location
and size of RAM.
Use this information to get the physical address to relocate Xen to in
setup_pagetables().
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Add early_printk() which can be used before setup_pagetables(). This
will be used when doing the early parsing of the DTB.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Add a mapping for the device tree blob in the initial page tables.
This will allow the DTB to be parsed for memory information prior to
setting up the real page tables.
It is mapped into the first L2 slot after the fixmap. When this slot
is reused in setup_pagetables(), flush the TLB.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Link a device tree blob (DTB) into the xen image. This is loaded
immediately after Xen and xen_start() is called with the correct
address in atag_paddr.
The DTB file must be supplied by setting the CONFIG_DTB_FILE variable
in .config or on the make command line.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
Allow a zImage format kernel to be used for dom0. zImages are (by
default) hardcoded with the RAM location so adjust the RAM in the
memory map to match the physical memory map (0x80000000).
Vmlinux ELF images are loaded using a hack to locate the RAM so the
IPA is the same as the kernel's VA so the elf loader does the right
thing. If an ELF image is loaded the RAM will be located at
0xC0000000 (as before).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Committed-by: Ian Campbell <ian.campbell@citrix.com>
If a PCI System Error (SERR) is asserted it causes an NMI. If this NMI
occurs while the CPU is in printk() then Xen may deadlock as
pci_serr_error() calls console_force_unlock() which screws up the
console lock.
printk() isn't safe to call from NMI context so defer the diagnostic
message to a softirq.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Tested-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
An lea instruction with two register operands should raise an
undefined instruction exception.
Skype does such a instruction and will crash when starting if it does
not get the exception.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Committed-by: Keir Fraser <keir@xen.org>
Set dom0's initial maximum reservation using the max value supplied in
the dom0_mem command line option without limiting it by the available
memory.
This allows dom0 to make use of any hotplugged memory without having
to also adjust the maximum reservation.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Use the 'dom0_mem' command line option to set the maximum number of
pages for dom0. dom0 can use then use the XENMEM_maximum_reservation
memory op to automatically find this limit and reduce the size of any
page tables etc.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
The result of a CPUID Extended Topology Enumeration leaf for PV guests
is invalid as the level in ECX is ignored. This can cause some guests
to loop endlessly when trying to enumerate the topology.
Since the physical topology isn't useful to PV guests set the topology
leaf as unsupported.
Guests affected include Linux kernels prior 2.6.32 where a workaround
was applied ("xen: mask extended topology info in cpu",
82d6469916c6fcfa345636a49004c9d1753905d1).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
David Vrabel