The guest may try to load data from the emulated MMIO region using
instructions with Sign-Extension (i.e ldrs*). Any use of one those,
will set the SSE bit (Syndrome Sign Extend) in the ISS (see B3-1433
in DDI 0406C.b).
Note that the bit can only be set for access size smaller than the
register size (i.e byte/half-word for aarch32, byte/half-word/word for
aarch32). So we don't have to worry about undefined C behavior.
Until now, the support of sign-extension was limited for byte access in
vGIC emulation. Although there is no reason to not have it generically.
So move the support just after we get the data from the MMIO emulation.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Rather than letting each handler to retrieve the register used by the
I/O access, add a new parameter to pass the register in parameter.
This will help to implement generic register manipulation on I/O access
such as sign-extension and endianess.
Read handlers need to modify the value of the register, so a pointer to
it is given in argument. Write handlers shouldn't modify the register,
therefore only a plain value is given.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Place the calls to xc_vcpu_setcontext and the allocation of the hypercall
buffer into the arch-specific vcpu hooks. This is needed in order to
introduce a new builder, so x86 HVM guests can initialize the BSP using
XEN_DOMCTL_sethvmcontext instead of XEN_DOMCTL_setvcpucontext.
This patch should not introduce any functional change.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
..which gets memory map and calls ExitBootServices(). We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which sets chosen GOP mode. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which collects variable store parameters. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which collects system tables data. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which finds suitable GOP mode. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which gets pointer to GOP device. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which sets console mode. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
..which initializes basic EFI variables. We want to re-use this
code to support multiboot2 protocol on EFI platforms.
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Move the driver register function to the cpufreq.c, and remove the
(unused) de-registration one.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Mark the funciton __init.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
The spatch provided in previous patch didn't handle all sites that need
transformation.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There is code in libxl using XTL_VERBOSE. We should provide a libxl
mapping for it.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
When building on 64-bit platforms this prevents build errors for
32-bit components which are enabled on a default build.
Signed-off-by: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Having the internals of xc_cpuid_policy() make hypercalls to collect domain
information causes xc_cpuid_apply_policy() to be very inefficient.
Re-order operations to collect all information at once at the outermost layer,
and pass a structure in to all cpuid policy generation functions.
This removes several hypercalls (4 from HVM, 3 from PV) for each of the
up-to 108 leaves processed.
No change in the eventual policy provided, although all the information
gathering how has (or has correct) error checking.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Since XSA-131 qemu-xen has defaulted to non-permissive mode and the
option was extended to cover that case in 015a373351 "tools: libxl:
allow permissive qemu-upstream pci passthrough".
Since I was rewrapping to adjust the text anyway I've split the safety
warning into a separate paragraph to make it more obvious.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Eric <epretorious@yahoo.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
During the attachment of a loopback mounted image file, the mode of all
curent instances of this device already attached to other domains must be
checked. This requires finding all loopback devices pointing to the inode
of the shared image file, and then comparing the major and minor number of
these devices to the major and minor number of every vbd device found in the
xenstore database.
Prior to this patch, the entire xenstore database is walked for every instance
of every loopback device pointing to the same shared image file. This process
causes the block attachment process to becomes exponentially slower with every
additional attachment of a shared image.
Rather than scanning all of xenstore for every instance of a shared loopback
device, this patch creates a list of the major and minor numbers from all
matching loopback devices. After generating this list, Xenstore is walked
once, and major and minor numbers from every vbd are checked against the list.
If a match is found, the mode of that vbd is checked for compatibility with
the mode of the device being attached.
Signed-off-by: Mike Latimer <mlatimer@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
As per PSCI 0.2 spec, if CPU_ON entry_point_address is 64-bit then SMC
call function ID parameter should be set to SMC64 version.
Signed-off-by: Brijesh Singh <brijeshkumar.singh@amd.com>
Reviewed-by: Julien grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
It looks to be missing in the policy file for the initial
domain. Eventually we may want to extend this access to
non-dom0 domains but for now it certainly dom0-only.
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CONFIG_HVM is not used anywhere in the build process so drop it.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
In order to better support future Intel processors, intel_pstate
changes to use percentage values to tune P-states. The setpolicy
driver interface is used to configure the intel_pstate internal
policy. The __cpufreq_set_policy needs to be intercepted to use
the setpolicy driver if it exists.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Add support to detect the APERF/MPERF feature. Also, remove the identical
code in cpufreq.c and powernow.c.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Cosmetics.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Use a bit mask for testing of a set bit instead of test_bit in case no
atomic operation is needed, as this will lead to smaller and more
effective code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
And also remove the extra space. 'gmfn' does not exist in this
function anymore.
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Use a bit mask for testing of a set bit instead of test_bit in case no
atomic operation is needed, as this will lead to smaller and more
effective code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use a bit mask for testing of a set bit instead of test_bit in case no
atomic operation is needed, as this will lead to smaller and more
effective code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use a bit mask for testing of a set bit instead of test_bit in case no
atomic operation is needed, as this will lead to smaller and more
effective code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use a bit mask for testing of a set bit instead of test_bit in case no
atomic operation is needed, as this will lead to smaller and more
effective code.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Dario Faggioli <dario.faggioli@citrix.com>
Now that p2m->get_entry() always returns a valid order, utilize this
to accelerate some of the operations in PoD code. (There are two uses
of p2m->get_entry() left which don't easily lend themselves to this
optimization.)
Also adjust a few types as needed and remove stale comments from
p2m_pod_cache_add() (to avoid duplicating them yet another time).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Julien Grall
Roger Pau Monne
Daniel Kiper
Wei Liu
Wei Wang
Sander Eikelenboom
Andrew Cooper
Ian Campbell
Mike Latimer
Brijesh Singh
Konrad Rzeszutek Wilk
Doug Goldstein
Dario Faggioli
Juergen Gross
Jan Beulich