Nicola reports that the XSA-438 fix introduced new MISRA violations because of
some incidental tidying it tried to do. The parameter is useless, so resolve
the MISRA regression by removing it.
hap_update_cr3() discards the parameter entirely, while sh_update_cr3() uses
it to distinguish internal and external callers and therefore whether the
paging lock should be taken.
However, we have paging_lock_recursive() for this purpose, which also avoids
the ability for the shadow internal callers to accidentally not hold the lock.
Fixes: fb0ff49fe9 ("x86/shadow: defer releasing of PV's top-level shadow reference")
Reported-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
(cherry picked from commit e71157d1ac)
RFDS affects Atom cores, also branded E-cores, between the Goldmont and
Gracemont microarchitectures. This includes Alder Lake and Raptor Lake hybrid
clien systems which have a mix of Gracemont and other types of cores.
Two new bits have been defined; RFDS_CLEAR to indicate VERW has more side
effets, and RFDS_NO to incidate that the system is unaffected. Plenty of
unaffected CPUs won't be getting RFDS_NO retrofitted in microcode, so we
synthesise it. Alder Lake and Raptor Lake Xeon-E's are unaffected due to
their platform configuration, and we must use the Hybrid CPUID bit to
distinguish them from their non-Xeon counterparts.
Like MD_CLEAR and FB_CLEAR, RFDS_CLEAR needs OR-ing across a resource pool, so
set it in the max policies and reflect the host setting in default.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit fb5b6f6744)
... before we add yet more complexity to this logic. Mostly expanded
comments, but with three minor changes.
1) Introduce cpu_has_useful_md_clear to simplify later logic in this patch and
future ones.
2) We only ever need SC_VERW_IDLE when SMT is active. If SMT isn't active,
then there's no re-partition of pipeline resources based on thread-idleness
to worry about.
3) The logic to adjust HVM VERW based on L1D_FLUSH is unmaintainable and, as
it turns out, wrong. SKIP_L1DFL is just a hint bit, whereas opt_l1d_flush
is the relevant decision of whether to use L1D_FLUSH based on
susceptibility and user preference.
Rewrite the logic so it can be followed, and incorporate the fact that when
FB_CLEAR is visible, L1D_FLUSH isn't a safe substitution.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 1eb91a8a06)
VERW is going to be used for a 3rd purpose, and the existing nomenclature
didn't survive the Stale MMIO issues terribly well.
Rename the command line option from `md-clear=` to `verw=`. This is more
consistent with other options which tend to be named based on what they're
doing, not which feature enumeration they use behind the scenes. Retain
`md-clear=` as a deprecated alias.
Rename opt_md_clear_{pv,hvm} and opt_fb_clear_mmio to opt_verw_{pv,hvm,mmio},
which has a side effect of making spec_ctrl_init_domain() rather clearer to
follow.
No functional change.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit f7603ca252)
On parts vulnerable to RFDS, VERW's side effects are extended to scrub all
non-architectural entries in various Physical Register Files. To remove all
of Xen's values, the VERW must be after popping the GPRs.
Rework SPEC_CTRL_COND_VERW to default to an CPUINFO_error_code %rsp position,
but with overrides for other contexts. Identify that it clobbers eflags; this
is particularly relevant for the SYSRET path.
For the IST exit return to Xen, have the main SPEC_CTRL_EXIT_TO_XEN put a
shadow copy of spec_ctrl_flags, as GPRs can't be used at the point we want to
issue the VERW.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 0a666cf2cd)
Broken out of the following patch because this change is subtle enough on its
own. See it for the rational of why we're moving VERW.
As for how, extend the trick already used to hold one condition in
flags (RESUME vs LAUNCH) through the POPing of GPRs.
Move the MOV CR earlier. Intel specify flags to be undefined across it.
Encode the two conditions we want using SF and PF. See the code comment for
exactly how.
Leave a comment to explain the lack of any content around
SPEC_CTRL_EXIT_TO_VMX, but leave the block in place. Sods law says if we
delete it, we'll need to reintroduce it.
This is part of XSA-452 / CVE-2023-28746.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 475fa20b73)
MD_CLEAR and FB_CLEAR need OR-ing across a migrate pool. Allow this, by
having them unconditinally set in max, with the host values reflected in
default. Annotate the bits as having special properies.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit de17162caf)
restore_all_guest() does a lot of manipulation of the stack after popping the
GPRs, and uses raw %rsp displacements to do so. Also, almost all entrypaths
use raw %rsp displacements prior to pushing GPRs.
Provide better mnemonics, to aid readability and reduce the chance of errors
when editing.
No functional change. The resulting binary is identical.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 37541208f1)
Dealing with exceptions raised from within emulation stubs involves
discarding return address (replaced by exception related information).
Such discarding of course also requires removing the corresponding entry
from the shadow stack.
Also amend the comment in fixup_exception_return(), to further clarify
why use of ptr[1] can't be an out-of-bounds access.
This is CVE-2023-46841 / XSA-451.
Fixes: 209fb9919b ("x86/extable: Adjust extable handling to be shadow stack compatible")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 91f5f7a915
master date: 2024-02-27 13:49:22 +0100
The current behavior is that no error is reported if (some) phantom functions
fail to be assigned during device add or assignment, so the operation succeeds
even if some phantom functions are not correctly setup.
This can lead to devices possibly being successfully assigned to a domU while
some of the device phantom functions are still assigned to dom0. Even when the
device is assigned domIO before being assigned to a domU phantom functions
might fail to be assigned to domIO, and also fail to be assigned to the domU,
leaving them assigned to dom0.
Since the device can generate requests using the IDs of those phantom
functions, given the scenario above a device in such state would be in control
of a domU, but still capable of generating transactions that use a context ID
targeting dom0 owned memory.
Modify device assign in order to attempt to deassign the device if phantom
functions failed to be assigned.
Note that device addition is not modified in the same way, as in that case the
device is assigned to a trusted domain, and hence partial assign can lead to
device malfunction but not a security issue.
This is XSA-449 / CVE-2023-46839
Fixes: 4e9950dc1b ('IOMMU: add phantom function support')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: cb4ecb3cc1
master date: 2024-01-30 14:28:01 +0100
On Arm32, after cleaning and invalidating the last dcache line of the top
domheap page i.e. VA = 0xfffff000 (as a result of flushing the page to
RAM), we end up adding the value of a dcache line size to the pointer
once again, which results in a pointer arithmetic overflow (with 64B line
size, operation 0xffffffc0 + 0x40 overflows to 0x0). Such behavior is
undefined and given the wide range of compiler versions we support, it is
difficult to determine what could happen in such scenario.
Modify clean_and_invalidate_dcache_va_range() as well as
clean_dcache_va_range() and invalidate_dcache_va_range() due to similarity
of handling to prevent pointer arithmetic overflow. Modify the loops to
use an additional variable to store the index of the next cacheline.
Add an assert to prevent passing a region that wraps around which is
illegal and would end up in a page fault anyway (region 0-2MB is
unmapped). Lastly, return early if size passed is 0.
Note that on Arm64, we don't have this problem given that the max VA
space we support is 48-bits.
This is XSA-447 / CVE-2023-46837.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
master commit: 190b7f49af
master date: 2023-12-12 14:01:00 +0100
Before speculation defences, some paths in Xen could genuinely get away with
being IRQs-on at entry. But XPTI invalidated this property on most paths, and
attempting to maintain it on the remaining paths was a mistake.
Fast forward, and DO_SPEC_CTRL_COND_IBPB (protection for AMD BTC/SRSO) is not
IRQ-safe, running with IRQs enabled in some cases. The other actions taken on
these paths happen to be IRQ-safe.
Make entry_int82() and int80_direct_trap() unconditionally Interrupt Gates
rather than Trap Gates. Remove the conditional re-adjustment of
int80_direct_trap() in smp_prepare_cpus(), and have entry_int82() explicitly
enable interrupts when safe to do so.
In smp_prepare_cpus(), with the conditional re-adjustment removed, the
clearing of pv_cr3 is the only remaining action gated on XPTI, and it is out
of place anyway, repeating work already done by smp_prepare_boot_cpu(). Drop
the entire if() condition to avoid leaving an incorrect vestigial remnant.
Also drop comments which make incorrect statements about when its safe to
enable interrupts.
This is XSA-446 / CVE-2023-46836
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit a48bb129f1)
The current setup of the quarantine page tables assumes that the quarantine
domain (dom_io) has been initialized with an address width of
DEFAULT_DOMAIN_ADDRESS_WIDTH (48).
However dom_io being a PV domain gets the AMD-Vi IOMMU page tables levels based
on the maximum (hot pluggable) RAM address, and hence on systems with no RAM
above the 512GB mark only 3 page-table levels are configured in the IOMMU.
On systems without RAM above the 512GB boundary amd_iommu_quarantine_init()
will setup page tables for the scratch page with 4 levels, while the IOMMU will
be configured to use 3 levels only. The page destined to be used as level 1,
and to contain a directory of PTEs ends up being the address in a PTE itself,
and thus level 1 page becomes the leaf page. Without the level mismatch it's
level 0 page that should be the leaf page instead.
The level 1 page won't be used as such, and hence it's not possible to use it
to gain access to other memory on the system. However that page is not cleared
in amd_iommu_quarantine_init() as part of re-initialization of the device
quarantine page tables, and hence data on the level 1 page can be leaked
between device usages.
Fix this by making sure the paging levels setup by amd_iommu_quarantine_init()
match the number configured on the IOMMUs.
Note that IVMD regions are not affected by this issue, as those areas are
mapped taking the configured paging levels into account.
This is XSA-445 / CVE-2023-46835
Fixes: ea38867831 ('x86 / iommu: set up a scratch page in the quarantine domain')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit fe1e4668b3)
The use of access_ok() is buggy, because it permits access to the compat
translation area. 64bit PV guests don't use the XLAT area, but on AMD
hardware, the DBEXT feature allows a breakpoint to match up to a 4G aligned
region, allowing the breakpoint to reach outside of the XLAT area.
Prior to c/s cda16c1bb2 ("x86: mirror compat argument translation area for
32-bit PV"), the live GDT was within 4G of the XLAT area.
All together, this allowed a malicious 64bit PV guest on AMD hardware to place
a breakpoint over the live GDT, and trigger a #DB livelock (CVE-2015-8104).
Introduce breakpoint_addr_ok() and explain why __addr_ok() happens to be an
appropriate check in this case.
For Xen 4.14 and later, this is a latent bug because the XLAT area has moved
to be on its own with nothing interesting adjacent. For Xen 4.13 and older on
AMD hardware, this fixes a PV-trigger-able DoS.
This is part of XSA-444 / CVE-2023-34328.
Fixes: 65e3554908 ("x86/PV: support data breakpoint extension registers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit dc9d9aa62d)
The handling of MSR_DR{0..3}_MASK is asymmetric between PV and HVM guests.
HVM guests context switch in based on the guest view of DBEXT, whereas PV
guest switch in base on the host capability. Both guest types leave the
context dirty for the next vCPU.
This leads to the following issue:
* PV or HVM vCPU has debugging active (%dr7 + mask)
* Switch out deactivates %dr7 but leaves other state stale in hardware
* HVM vCPU with debugging activate but can't see DBEXT is switched in
* Switch in loads %dr7 but leaves the mask MSRs alone
Now, the HVM vCPU is operating in the context of the prior vCPU's mask MSR,
and furthermore in a case where it genuinely expects there to be no masking
MSRs.
As a stopgap, adjust the HVM path to switch in/out the masks based on host
capabilities rather than guest visibility (i.e. like the PV path). Adjustment
of the of the intercepts still needs to be dependent on the guest visibility
of DBEXT.
This is part of XSA-444 / CVE-2023-34327
Fixes: c097f54912 ("x86/SVM: support data breakpoint extension registers")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 5d54282f98)
Introduce a timeout for bootloader execution when running in restricted mode.
Allow overwriting the default time out with an environment provided value.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit 9c114178ff)
Much like the device model depriv mode, add the same kind of support for the
bootloader. Such feature allows passing a UID as a parameter for the
bootloader to run as, together with the bootloader itself taking the necessary
actions to isolate.
Note that the user to run the bootloader as must have the right permissions to
access the guest disk image (in read mode only), and that the bootloader will
be run in non-interactive mode when restricted.
If enabled bootloader restrict mode will attempt to re-use the user(s) from the
QEMU depriv implementation if no user is provided on the configuration file or
the environment. See docs/features/qemu-deprivilege.pandoc for more
information about how to setup those users.
Bootloader restrict mode is not enabled by default as it requires certain
setup to be done first (setup of the user(s) to use in restrict mode).
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
(cherry picked from commit 1f762642d2)
Introduce a --runas=<uid> flag to deprivilege pygrub on Linux and *BSDs. It
also implicitly creates a chroot env where it drops a deprivileged forked
process. The chroot itself is cleaned up at the end.
If the --runas arg is present, then pygrub forks, leaving the child to
deprivilege itself, and waiting for it to complete. When the child exists,
the parent performs cleanup and exits with the same error code.
This is roughly what the child does:
1. Initialize libfsimage (this loads every .so in memory so the chroot
can avoid bind-mounting /{,usr}/lib*
2. Create a temporary empty chroot directory
3. Mount tmpfs in it
4. Bind mount the disk inside, because libfsimage expects a path, not a
file descriptor.
5. Remount the root tmpfs to be stricter (ro,nosuid,nodev)
6. Set RLIMIT_FSIZE to a sensibly high amount (128 MiB)
7. Depriv gid, groups and uid
With this scheme in place, the "output" files are writable (up to
RLIMIT_FSIZE octets) and the exposed filesystem is immutable and contains
the single only file we can't easily get rid of (the disk).
If running on Linux, the child process also unshares mount, IPC, and
network namespaces before dropping its privileges.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
(cherry picked from commit e0342ae555)
This is work required in order to let pygrub operate in highly deprivileged
chroot mode. This patch adds a function that preloads every plugin, hence
ensuring that a on function exit, every shared library is loaded in memory.
The new "init" function is supposed to be used before depriv, but that's
fine because it's not acting on untrusted data.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
(cherry picked from commit 990e65c3ad)
This patch allows pygrub to get ahold of every RW file descriptor it needs
early on. A later patch will clamp the filesystem it can access so it can't
obtain any others.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
(cherry picked from commit 0710d7d445)
Small tidy up to ensure output_directory always has a trailing '/' to ease
concatenating paths and that `output` can only be a filename or None.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
(cherry picked from commit 9f2ff9a7c9)
There's a hypercall being issued in order to determine whether PV64 is
supported, but since Xen 4.3 that's strictly true so it's not required.
Plus, this way we can avoid mapping the privcmd interface altogether in the
depriv pygrub.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit f4b504c617)
Adds the common tools include folder to the -I compile flags
of libfsimage. This allows us to use:
xen-tools/common-macros.h:BUILD_BUG_ON()
With it, statically assert a sanitized "blocklog - SECTOR_BITS" cannot
underflow.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 7d85c70431)
Sanity-check the XFS superblock for wellformedness at the mount handler.
This forces pygrub to abort parsing a potentially malformed filesystem and
ensures the invariants assumed throughout the rest of the code hold.
Also, derive parameters from previously sanitized parameters where possible
(rather than reading them off the superblock)
The code doesn't try to avoid overflowing the end of the disk, because
that's an unlikely and benign error. Parameters used in calculations of
xfs_daddr_t (like the root inode index) aren't in critical need of being
sanitized.
The sanitization of agblklog is basically checking that no obvious
overflows happen on agblklog, and then ensuring agblocks is contained in
the range (2^(sb_agblklog-1), 2^sb_agblklog].
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 620500dd1b)
agblklog could plausibly be 32, but that would overflow this shift.
Perform the shift as ULL and cast to u32 at the end instead.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit ddc45e4eea)
xfs_info.agnolog (and related code) and XFS_INO_AGBNO_BITS are dead code
that serve no purpose.
This is part of XSA-443 / CVE-2023-34325
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 37fc1e6c1c)
The caching invalidation guidelines from the AMD-Vi specification (48882—Rev
3.07-PUB—Oct 2022) seem to be misleading on some hardware, as devices will
malfunction (see stale DMA mappings) if some fields of the DTE are updated but
the IOMMU TLB is not flushed. This has been observed in practice on AMD
systems. Due to the lack of guidance from the currently published
specification this patch aims to increase the flushing done in order to prevent
device malfunction.
In order to fix, issue an INVALIDATE_IOMMU_PAGES command from
amd_iommu_flush_device(), flushing all the address space. Note this requires
callers to be adjusted in order to pass the DomID on the DTE previous to the
modification.
Some call sites don't provide a valid DomID to amd_iommu_flush_device() in
order to avoid the flush. That's because the device had address translations
disabled and hence the previous DomID on the DTE is not valid. Note the
current logic relies on the entity disabling address translations to also flush
the TLB of the in use DomID.
Device I/O TLB flushing when ATS are enabled is not covered by the current
change, as ATS usage is not security supported.
This is XSA-442 / CVE-2023-34326
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 5fc98b9708)
The function domain_entry_fix() will be initially called to check if the
quota is correct before attempt to commit any nodes. So it would be
possible that accounting is temporarily negative. This is the case
in the following sequence:
1) Create 50 nodes
2) Start two transactions
3) Delete all the nodes in each transaction
4) Commit the two transactions
Because the first transaction will have succeed and updated the
accounting, there is no guarantee that 'd->nbentry + num' will still
be above 0. So the assert() would be triggered.
The assert() was introduced in dbef1f7482 ("tools/xenstore: simplify
and fix per domain node accounting") with the assumption that the
value can't be negative. As this is not true revert to the original
check but restricted to the path where we don't update. Take the
opportunity to explain the rationale behind the check.
This CVE-2023-34323 / XSA-440.
Fixes: dbef1f7482 ("tools/xenstore: simplify and fix per domain node accounting")
Signed-off-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
(cherry picked from commit c4e05c97f5)
sh_set_toplevel_shadow() re-pinning the top-level shadow we may be
running on is not enough (and at the same time unnecessary when the
shadow isn't what we're running on): That shadow becomes eligible for
blowing away (from e.g. shadow_prealloc()) immediately after the
paging lock was dropped. Yet it needs to remain valid until the actual
page table switch occurred.
Propagate up the call chain the shadow entry that needs releasing
eventually, and carry out the release immediately after switching page
tables. Handle update_cr3() failures by switching to idle pagetables.
Note that various further uses of update_cr3() are HVM-only or only act
on paused vCPU-s, in which case sh_set_toplevel_shadow() will not defer
releasing of the reference.
While changing the update_cr3() hook, also convert the "do_locking"
parameter to boolean.
This is CVE-2023-34322 / XSA-438.
Reported-by: Tim Deegan <tim@xen.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@cloud.com>
(cherry picked from commit fb0ff49fe9)
In the Zen1 microarchitecure, there is one divider in the pipeline which
services uops from both threads. In the case of #DE, the latched result from
the previous DIV to execute will be forwarded speculatively.
This is an interesting covert channel that allows two threads to communicate
without any system calls. In also allows userspace to obtain the result of
the most recent DIV instruction executed (even speculatively) in the core,
which can be from a higher privilege context.
Scrub the result from the divider by executing a non-faulting divide. This
needs performing on the exit-to-guest paths, and ist_exit-to-Xen.
Alternatives in IST context is believed safe now that it's done in NMI
context.
This is XSA-439 / CVE-2023-20588.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit b5926c6ecf)
We already have 3 cases using STIBP as a Zen1/2 heuristic, and are about to
introduce a 4th. Wrap the heuristic into a pair of predicates rather than
opencoding it, and the explanation of the heuristic, at each usage site.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit de1d265001)
There is a corner case where e.g. an NMI hitting an exit-to-guest path after
SPEC_CTRL_EXIT_TO_* would have run the entire NMI handler *after* the VERW
flush to scrub potentially sensitive data from uarch buffers.
In order to compensate, issue VERW when exiting to Xen from an IST entry.
SPEC_CTRL_EXIT_TO_XEN already has two reads of spec_ctrl_flags off the stack,
and we're about to add a third. Load the field into %ebx, and list the
register as clobbered.
%r12 has been arranged to be the ist_exit signal, so add this as an input
dependency and use it to identify when to issue a VERW.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 3ee6066bcd)
Use %r12 to hold an ist_exit boolean. This register is zero elsewhere in the
entry/exit asm, so it only needs setting in the IST path.
As this is subtle and fragile, add check_ist_exit() to be used in debugging
builds to cross-check that the ist_exit boolean matches the entry vector.
Write check_ist_exit() it in C, because it's debug only and the logic more
complicated than I care to maintain in asm.
For now, we only need to use this signal in the exit-to-Xen path, but some
exit-to-guest paths happen in IST context too. Check the correctness in all
exit paths to avoid the logic bit-rotting.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 21bdc25b05)
x86/entry: Partially revert IST-exit checks
The patch adding check_ist_exit() didn't account for the fact that
reset_stack_and_jump() is not an ABI-preserving boundary. The IST-ness in
%r12 doesn't survive into the next context, and is a stale value C.
This shows up in Gitlab CI for the Clang build:
https://gitlab.com/xen-project/people/andyhhp/xen/-/jobs/5112783827
and in OSSTest for GCC 8:
http://logs.test-lab.xenproject.org/osstest/logs/183045/test-amd64-amd64-xl-qemuu-debianhvm-amd64/serial-pinot0.log
There's no straightforward way to reconstruct the IST-exit-ness on the
exit-to-guest path after a context switch. For now, we only need IST-exit on
the return-to-Xen path.
Fixes: 21bdc25b05 ("x86/entry: Track the IST-ness of an entry for the exit paths")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9b57c800b7)
All other SPEC_CTRL_{ENTRY,EXIT}_* helpers hold stack_end in %r14. Adjust it
for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 7aa28849a1)
... to better explain how they're used.
Doing so highlights that SPEC_CTRL_EXIT_TO_XEN is missing a VERW flush for the
corner case when e.g. an NMI hits late in an exit-to-guest path.
Leave a TODO, which will be addressed in subsequent patches which arrange for
VERW flushing to be safe within SPEC_CTRL_EXIT_TO_XEN.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 45f0055735)
These have grown more complex over time, with some already having been
converted.
Provide full Requires/Clobbers comments, otherwise missing at this level of
indirection.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 7125429aaf)
With the SPEC_CTRL_EXIT_TO_XEN{,_IST} confusion fixed, it's now obvious that
there's only a single EXIT_TO_XEN path. Fold DO_SPEC_CTRL_EXIT_TO_XEN into
SPEC_CTRL_EXIT_TO_XEN to simplify further fixes.
When merging labels, switch the name to .L\@_skip_sc_msr as "skip" on its own
is going to be too generic shortly.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 694bb0f280)
c/s 3fffaf9c13 ("x86/entry: Avoid using alternatives in NMI/#MC paths")
dropped the only user, leaving behind the (incorrect) implication that Xen had
split exit paths.
Delete the unused SPEC_CTRL_EXIT_TO_XEN and rename SPEC_CTRL_EXIT_TO_XEN_IST
to SPEC_CTRL_EXIT_TO_XEN for consistency.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 1c18d73774)
Reportedly the AMD Custom APU 0405 found on SteamDeck, models 0x90 and
0x91, (quoting the respective Linux commit) is similarly affected. Put
another instance of our Zen1 vs Zen2 distinction checks in
amd_check_zenbleed(), forcing use of the chickenbit irrespective of
ucode version (building upon real hardware never surfacing a version of
0xffffffff).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 145a69c094)
The region that needs to be cleaned/invalidated may be at the top
of the address space. This means that 'end' (i.e. 'p + size') will
be 0 and therefore nothing will be cleaned/invalidated as the check
in the loop will always be false.
On Arm64, we only support we only support up to 48-bit Virtual
address space. So this is not a concern there. However, for 32-bit,
the mapcache is using the last 2GB of the address space. Therefore
we may not clean/invalidate properly some pages. This could lead
to memory corruption or data leakage (the scrubbed value may
still sit in the cache when the guest could read directly the memory
and therefore read the old content).
Rework invalidate_dcache_va_range(), clean_dcache_va_range(),
clean_and_invalidate_dcache_va_range() to handle a cache flush
with an element at the top of the address space.
This is CVE-2023-34321 / XSA-437.
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Acked-by: Bertrand Marquis <bertrand.marquis@arm.com>
master commit: 9a216e92de
master date: 2023-09-05 14:30:08 +0200
GDS_CTRL is introduced by the August 2023 microcode. GDS_NO is for current
and future processors not susceptible to GDS.
This is part of XSA-435 / CVE-2022-40982
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 9f585f59d9)
The August 2023 microcode for GDS has an impact on the CLWB instruction. See
code comments for full details.
This is part of XSA-435 / CVE-2022-40982
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 2dd06b4ea1)
On native, synthesise the SRSO bits by probing various hardware properties as
given by AMD.
Extend the IBPB-on-entry mitigations to Zen3/4 CPUs. There is a microcode
prerequisite to make this an effective mitigation.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 220c06e6fe)
AMD have specified new CPUID bits relating to SRSO.
* SRSO_NO indicates that hardware is no longer vulnerable to SRSO.
* IBPB_BRTYPE indicates that IBPB flushes branch type information too.
* SBPB indicates support for a relaxed form of IBPB that does not flush
branch type information.
Current CPUs (Zen4 and older) are not expected to enumerate these bits.
Native software is expected to synthesise them for guests using model and
microcode revision checks.
Two are just status bits, and SBPB is trivial to support for guests by
tweaking the reserved bit calculation in guest_wrmsr() and feature
dependencies. Expose all by default to guests, so they start showing up when
Xen synthesises them.
While adding feature dependenies for IBPB, fix up an overlooked issue from
XSA-422. It's inappropriate to advertise that IBPB flushes RET predictions if
IBPB is unavailable itself.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 2280b0ee2a)
... in order to make the SRSO mitigations easier to integrate.
* Check for AMD/Hygon CPUs directly, rather than assuming based on IBPB.
In particular, Xen supports synthesising the IBPB bit to guests on Intel to
allow IBPB while dissuading the use of (legacy) IBRS.
* Collect def_ibpb_entry rather than opencoding the BTC_NO calculation for
both opt_ibpb_entry_{pv,hvm}.
No functional change.
This is part of XSA-434 / CVE-2023-20569
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
(cherry picked from commit 292f68fb77)
With xl/libxl now able to control the policy bits for MSR_ARCH_CAPS, it is
safe to advertise to guests by default. In turn, we don't need the special
case to expose details to dom0.
This advertises MSR_ARCH_CAPS to guests on *all* Intel hardware, even if the
register content ends up being empty.
- Advertising ARCH_CAPS and not RSBA signals "retpoline is safe here and
everywhere you might migrate to". This is important because it avoids the
guest kernel needing to rely on model checks.
- Alternatively, levelling for safety across the Broadwell/Skylake divide
requires advertising ARCH_CAPS and RSBA, meaning "retpoline not safe on
some hardware you might migrate to".
On Cascade Lake and later hardware, guests can now see RDCL_NO (not vulnerable
to Meltdown) amongst others. This causes substantial performance
improvements, as guests are no longer applying software mitigations in cases
where they don't need to.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
(cherry picked from commit 4b2cdbfe76)
We can't use initializers of unnamed struct/union members just yet.
Fixes: d638fe233c ("libxl: use the cpuid feature names from cpufeatureset.h")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 1aa5acbbec)
Because of -Wshadow the build otherwise fails with old enough glibc.
While there also obey line length limits for msr_add().
Fixes: 6d21cedbaa ("libxl: add support for parsing MSR features")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 4f6afde88b)
Andrew Cooper
Jan Beulich
Roger Pau Monné
Michal Orzel
Alejandro Vallejo
Julien Grall
Stefano Stabellini