`font` had a trailing single quote which was out of place.
`gnttab_max_frames` was missing escapes for the underscores which caused the
underscores to take their markdown meaning, causing 'max' in the middle to be
italicised. Escape the underscores, and make all command line parameters
bold, to be consistent with the existing style.
Clarify how the default for `nmi` changes between debug and non debug builds
of Xen.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The current value of nr_static_irqs + 256 is often too small for larger
systems. Make it dependent on CPU count and number of IO-APIC pins on
x86, and (until it obtains PCI support) simply NR_IRQS on ARM.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Release-Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Currently the quirk code for SandyBridge uses the VTd timeout value when
writing to an IGD register. This is the wrong timeout to use and, at
1000 msec., is also much too large. This patch changes the quirk code
to use a timeout that is specific to the IGD device and allows the user
control of the timeout.
Boolean settings for the boot parameter `snb_igd_quirk' keep their current
meaning, enabling or disabling the quirk code with a timeout of 1000 msec.
In addition specifying `snb_igd_quirk=default' will enable the code and
set the timeout to the theoretical maximum of 670 msec. For finer control,
specifying `snb_igd_quirk=n', where `n' is a decimal number, will enable
the code and set the timeout to `n' msec.
Signed-off-by: Don Dugger <donald.d.dugger@intel.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Update documentation.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
* Add options whose code has been committed (without a patch to this file).
* Remove options which have been deleted (without a patch to this file).
* Tweak some formatting for consistency.
* Nuke some trailing whitespace.
I believe this document now identifies the exact set of command line options
accepted by Xen, for both x86 and ARM architectures.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
For 'dom0_max_vcpus' and 'hvm_debug', markdown was interpreting the text as
regular text, and reflowing it as a regular paragraph, leading to a single
line as output. Reformat them as code blocks inside blockquote blocks, which
causes them to take their precise whitespace layout.
For 'psr', the bullet point was incorrectly delineated from paragraph text,
causing it to be reflowed. Alter the formatting to include the CMT-specific
options as sub-bullets of the overall CMT resource.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Release-acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
Some versions of markdown (specifically the one in Debian Wheezy, currently
used to generate
http://xenbits.xen.org/docs/unstable/misc/xen-command-line.html) seem to be
confused by nested lists in the middle of multi-paragraph parent list entries
as seen in the com1,com2 entry.
The effect is that the "Default" section of all following entries are replace
by some sort of hash or checksum (at least, a string of 32 random seeming hex
digits).
Workaround this issue by making the decriptions of the DPS options a nested
list, moving the existing nested list describing the options for S into a third
level list. This seems to avoid the issue, and is arguably better formatting in
its own right (at least its not a regression IMHO)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Update EFI code to completely ignore the EFI comnandline when booted from GRUB.
Previusly it was parsed of EFI boot specific options, but these aren't used
when booted from GRUB.
Don't do EFI console or video configuration when booted by GRUB. The EFI boot
code does some console and video initialization to support native EFI boot from
the EFI boot manager or EFI shell. This initlization should not be done when
booted using GRUB.
Update EFI documentation to indicate that it describes EFI native boot, and
does not apply at all when Xen is booted using GRUB.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
On certain systems some of the memory map entries designated for use by
runtime services cannot be mapped (frequently due to firmware bugs). On
others, some of the memory map entries aren't even marked for runtime
services use, yet are being used by them. For both cases give people a
way to suppress use of runtime services altogether.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce gnttab_max_maptrack_frames: a new Xen command line option to
specify the max number of maptrack frames per domain.
Deprecate the old gnttab_max_nr_frames and introduce gnttab_max_frames
instead, that doesn't affect the maptrack. Keep gnttab_max_nr_frames for
compatibility.
Rename internally max_nr_grant_frames to max_grant_frames to avoid
confusions.
Introduce DEFAULT_MAX_MAPTRACK_FRAMES, that is completely independent
from max_nr_grant_frames.
Remove MAX_MAPTRACK_TO_GRANTS_RATIO that is now only used in one place
for compatibility.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Currently Xen can only read the configuration file if it is in ASCII
format. If it is in CHAR16 or CHAR8 it will choke. One way to verify
this is to use 'file':
xen.cfg: ASCII text
xen-char16.cfg: Little-endian UTF-16 Unicode text, with CRLF, CR line terminators
The latter is no good.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
In order to support pvgrub (or other bootloader) from dom0 chainloading a
pvgrub (or other) from within the domU filesystem we need a standard for where
the stage 1 bootloader should look and what it should expect to find there.
Add a document along those lines.
This is currently x86-specific since it is expected that other new architecures
(including ARM) will either not need to implement this due to the existence of
more generic specifications for that arch (e.g. the ARM VM spec) or will update
this document in due course.
Signed-off-by: Ian Campbell <ijc@hellion.org.uk>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Cc: Colin Watson <cjwatson@debian.org>
Cc: 759018@bugs.debian.org
A 'channel':
- is a low-bandwidth private communication channel that resembles
a physical serial port.
- is implemented as a PV console with a well-known string name
which is used to hook the channel to the appropriate software
in the guest (i.e. some kind of guest agent).
- has a backend 'connection' which describes what should happen
to the data.
The following 'connection' types are defined:
* PTY: the I/O surfaces as a pty in the backend domain
* SOCKET: a listening Unix domain socket accepts a connection in
the backend domain and proxies
Channels may be listed but don't currently support hotplug/unplug.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Some cleanups to the documentation-
- Remove unnecessary steps listed to apply ucode using initrd.
- Condense 'Misc notes' section as well
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Hvmloader uses the xenstore ring and then tries to reset it back
to its initial state before booting the guest. Occasionally xenstored
will read the ring while it is being zeroed and conclude it has
been corrupted. This prevents PV drivers from loading in the guest.
This patch updates the xenstore ring protocol definition, enabling
a server to advertise additional features to the guest. One such feature
is defined: the ability to cleanly reset the ring including the
higher-level protocol, like an enhanced RESET_WATCHES for rings.
This patch implements the ring reconnection features in oxenstored
and hvmloader, fixing the bug.
This patch also defines an 'invalid' xenstore packet type and uses this
to poison the ring over a reconnect. This will make diagnosing this
bug much easier in future.
Signed-off-by: David Scott <dave.scott@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Jon Ludlam <jonathan.ludlam@citrix.com>
Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Detect Cache Monitoring Technology(CMT) feature and enumerate the
resource types, one of which is to monitor the L3 cache occupancy.
Also introduce a Xen command line parameter to control the Platform
Shared Resource such as CMT.
Signed-off-by: Dongxiao Xu <dongxiao.xu@intel.com>
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This patch introduces documentation notes about AMD container
file formats and where to obtain latest container files from.
Also, We provide a how-to for updating patch level by
concatenating container files along with initrd images.
Misc notes about how Xen handles two containers of same
kind (if/when) they are concatenated together are also included.
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
The arm64 EFI boot support added a new 'dtb' value to the configuration file.
Update the documentation to describe this and how the coniguration file is not
used when GRUB loads the modules. Updates 'ucode' description to indicate that
it is x86 only.
Signed-off-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This behaves in the same way as Linux. The 64 byte limit is arbitrary but
long enough for practical purposes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Re-structured code.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
This patch adds the machinery required for protecting a guest's
network device state. This patch comprises of two parts:
1. Hotplug scripts: The remus-netbuf-setup script is responsible for
setting up and tearing down the necessary infrastructure required for
network output buffering. This script should be invoked by libxl for
each of the guest's network interfaces, when starting or stopping Remus.
Apart from returning success/failure indication via the usual hotplug
entries in xenstore, this script also writes to xenstore, the name of
the REMUS_IFB device to be used to control the vif's network output.
The script relies on libnl3 command line utilities to perform various
setup/teardown functions. The script is confined to Linux platforms only
since NetBSD does not seem to have libnl3.
2. Remus network device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) init_subkind_nic() & cleanup_subkind_nic() are called once per Remus
invocation. They establish and free netlink related state respectively.
b) setup() and teardown are called for each vif attached to the
guest.
During setup():
i) The hotplug script is called to setup a network buffer on a
given vif. The script chooses an available IFB device from
the system, redirects vif egress traffic to the IFB device
and sets up the plug qdisc (output buffer) on the IFB device.
The name of the IFB device is communicated via xenstore to
libxl.
ii) Libxl obtains a handle to the plug qdisc using the libnl3 API
and subsequently controls output buffering using this handle
in the checkpoint callbacks.
During teardown(), the hotplug scripts are called again to remove
the vif->ifb traffic redirection, release the ifb and the plug
qdisc associated with it.
c) The checkpoint callbacks [postsuspend(), preresume() and commit()]
are implemented as synchronous ops as the netlink calls associated
with the qdisc subsystem are very fast.
Signed-off-by: Shriram Rajagopalan <rshriram@cs.ubc.ca>
Signed-off-by: Yang Hongyang <yanghy@cn.fujitsu.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Analysis of XSAs 105 and 106 show that is possible to force a race condition
which causes any arbitrary instruction to be emulated.
To aid testing, explicitly introduce the Forced Emulation Prefix for debug
builds alone.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
/var/run is a runtime directory. It is not supposed to be packaged.
Remove unused SUBSYS_DIR variable from Config.mk and distro_mapping.txt.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Change NMI processing so that if watchdog=force is passed on the
command-line and the NMI is not caused by a perf counter overflow (i.e.
likely not a watchdog "tick"), the NMI is handled by the unknown NMI
handler.
This allows injection of NMIs from IPMI controllers that don't set the
IOCK/SERR bits to trigger the unknown NMI handler rather than be
ignored.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fix command line parsing (don't enable the watchdog on e.g.
"watchdog=xyz").
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Xen cannot safely use any ATS functionality until it gains asynchronous queued
invalidation support, because of the current synchronous wait for completion.
Do not turn ATS on by default.
While editing the default in the command line documentation, correct the
statement regarding PCI Passthrough. ATS is purely a performance
optimisation, and is certainly not required for PCI Passthrough to function.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
Adding actual descriptions for them, hiding the hvm_debug= one from
non-debug builds (the option was recognized but didn't take any effect
so far), and adjusting some debug level specifiers to their purpose.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
HP is setting the ACPI_FADT_NO_CMOS_RTC flag on newer systems,
regardless of whether they're being booted from UEFI. Add a command
line option to allow probing for a working RTC in that case.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
vCPU soft affinity and NUMA-aware scheduling does not have
to be related. However, soft affinity is how NUMA-aware
scheduling is actually implemented, and therefore, by default,
the results of automatic NUMA placement (at VM creation time)
are also used to set the soft affinity of all the vCPUs of
the domain.
Of course, this only happens if automatic NUMA placement is
enabled and actually takes place (for instance, if the user
does not specify any hard and soft affiniy in the xl config
file).
This also takes care of the vice-versa, i.e., don't trigger
automatic placement if the config file specifies either an
hard (the check for which was already there) or a soft (the
check for which is introduced by this commit) affinity.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
XEN_DOMCTL_gdbsx_domstatus is already safe. It loops at most over every vcpu
in a domain and breaks at the first vcpu with an event pending, marking it as
not-pending.
XEN_DOMCTL_gdbsx_pausevcpu had an incorrect bounds check against the vcpu id,
allowing an overflow of d->vcpu[] with an id between d->max_vcpus and
MAX_VIRT_CPUS. It was also able to overflow a vcpus pause count by many
repeated hypercalls.
The bounds check is fixed, and vcpu_pause() has been replaced with
vcpu_pause_by_systemcontroller() which cuts out at 255 uses.
XEN_DOMCTL_gdbsx_unpausevcpu suffered from the same bounds problems as its
pause counterpart, and is fixed in exactly the same way. Despite the
atomic_read(&v->pause_count), this code didn't successfully prevent against an
underflow of the vcpu pause count.
The vcpu_unpause() has been replaced with vcpu_pause_by_systemcontroller()
which correctly prevents against underflow. The printk() is updated to have a
proper guest logging level, and provide more useful information in the XSM
case of one domain having debugger privileges over another.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When using a multiboot capable bootloader this is exactly the field which
should be used.
Replace the deprecation wording with a reference to the information on the
priority of the bootargs fields.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Before this change, each vcpu had its own vcpu-affinity
(in v->cpu_affinity), representing the set of pcpus where
the vcpu is allowed to run. Since when NUMA-aware scheduling
was introduced the (credit1 only, for now) scheduler also
tries as much as it can to run all the vcpus of a domain
on one of the nodes that constitutes the domain's
node-affinity.
The idea here is making the mechanism more general by:
* allowing for this 'preference' for some pcpus/nodes to be
expressed on a per-vcpu basis, instead than for the domain
as a whole. That is to say, each vcpu should have its own
set of preferred pcpus/nodes, instead than it being the
very same for all the vcpus of the domain;
* generalizing the idea of 'preferred pcpus' to not only NUMA
awareness and support. That is to say, independently from
it being or not (mostly) useful on NUMA systems, it should
be possible to specify, for each vcpu, a set of pcpus where
it prefers to run (in addition, and possibly unrelated to,
the set of pcpus where it is allowed to run).
We will be calling this set of *preferred* pcpus the vcpu's
soft affinity, and this changes introduce it, and starts using it
for scheduling, replacing the indirect use of the domain's NUMA
node-affinity. This is more general, as soft affinity does not
have to be related to NUMA. Nevertheless, it allows to achieve the
same results of NUMA-aware scheduling, just by making soft affinity
equal to the domain's node affinity, for all the vCPUs (e.g.,
from the toolstack).
This also means renaming most of the NUMA-aware scheduling related
functions, in credit1, to something more generic, hinting toward
the concept of soft affinity rather than directly to NUMA awareness.
As a side effects, this simplifies the code quit a bit. In fact,
prior to this change, we needed to cache the translation of
d->node_affinity (which is a nodemask_t) to a cpumask_t, since that
is what scheduling decisions require (we used to keep it in
node_affinity_cpumask). This, and all the complicated logic
required to keep it updated, is not necessary any longer.
The high level description of NUMA placement and scheduling in
docs/misc/xl-numa-placement.markdown is being updated too, to match
the new architecture.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The page scrubbing is done in 128MB chunks in lockstep across all the
non-SMT CPU's. This allows for the boot CPU to hold the heap_lock whilst each
chunk is being scrubbed and then release the heap_lock when the CPU's are
finished scrubing their individual chunk. This allows for the heap_lock to
not be held continously and for pending softirqs are to be serviced
periodically across the CPU's.
The page scrub memory chunks are allocated to the CPU's in a NUMA aware
fashion to reduce socket interconnect overhead and improve performance.
Specifically in the first phase we scrub at the same time on all the
NUMA nodes that have CPUs - we also weed out the SMT threads so that
we only use cores (that gives a 50% boost). The second phase is for NUMA
nodes that have no CPUs - for that we use the closest NUMA node's CPUs
(non-SMT again) to do the job.
This patch reduces the boot page scrub time on a 128GB 64 core AMD Opteron
6386 machine from 49 seconds to 3 seconds.
On a IvyBridge-EX 8 socket box with 1.5TB it cuts it down from 15 minutes
to 63 seconds.
Signed-off-by: Malcolm Crossley <malcolm.crossley@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
cpufreq parameter can take more options than currently
documented. Include these with some comments regarding
their intention.
Signed-off-by: Aravind Gopalakrishnan <aravind.gopalakrishnan@amd.com>
Finally last patch in the series to enable creation of pvh dom0.
A pvh dom0 is created by adding dom0pvh to grub xen command line.
Signed-off-by: Mukesh Rathor <mukesh.rathor@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Handle new boolean option discard/no-discard for disk configuration. It
is supposed to disable discard support if file based backing storage was
intentionally created non-sparse to avoid fragmentation of the file.
The option intended for the backend driver. A new boolean property
"discard-enable" is written to the backend node. An upcoming patch for
qemu will make use of this property. The kernel blkback driver may be
updated as well to disable discard for phy based backing storage.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Supervisor Mode Access Prevention (SMAP) is a new security
feature disclosed by Intel, please refer to the following
document:
http://software.intel.com/sites/default/files/319433-014.pdf
If CR4.SMAP = 1, supervisor-mode data accesses are not allowed
to linear addresses that are accessible in user mode. If CPL < 3,
SMAP protections are disabled if EFLAGS.AC = 1. If CPL = 3, SMAP
applies to all supervisor-mode data accesses (these are implicit
supervisor accesses) regardless of the value of EFLAGS.AC.
This patch enables SMAP in Xen to prevent Xen hypervisor from
accessing pv guest data, whose translation paging-structure
entries' U/S flags are all set.
Signed-off-by: Feng Wu <feng.wu@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
With proper permission (and, for the I/O port case, wrap-around) checks
added (note that for the I/O port case a count of zero is now being
disallowed, in line with I/O memory handling):
XEN_DOMCTL_irq_permission:
XEN_DOMCTL_ioport_permission:
Of both IRQs and I/O ports there is only a reasonably small amount, so
there's no excess resource consumption involved here. Additionally
they both have a specialized XSM hook associated.
XEN_DOMCTL_iomem_permission:
While this also has a specialized XSM hook associated (just like
XEN_DOMCTL_{irq,ioport}_permission), it's not clear whether it's
reasonable to expect XSM to restrict the number of ranges associated
with a domain via this hook (which is the main resource consumption
item here).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Document and implement a new option that permits disk backends which
would otherwise have to avoid O_DIRECT (because of the network memory
lifetime bug) to use it anyway. This is:
direct-io-safe in the xl domain disk config specification
direct_io_safe in the libxl disk API
direct-io-safe in the backend xenstore interface
Add a reference to xen/include/public/io/blkif.h in
docs/misc/vbd-interface.txt.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Felipe Franciosi <felipe@paradoxo.org>
Andrew Cooper