Also make dmar_{read,write}q() actually do what their names suggest (we
don't need to be concerned of 32-bit restrictions anymore).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
The specification explicitly provides for this, so we should have
supported this from the beginning.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The per-domain event channel lock may suffer from contention. Add it to
the set of locks to be profiled when lock profiling is enabled.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
That flag now means cachability rather than protection, and a new flag
EFI_MEMORY_RO got added in its place.
Along with EFI_MEMORY_RO also add the two other new EFI_MEMORY_*
definitions, even if we don't need them right away.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
From: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
For example on Dell machines we see:
(XEN) 00000fed18000-00000fed19fff type=11 attr=8000000000000000
(XEN) Unknown cachability for MFNs 0xfed18-0xfed19
Let's allow them to be mapped as UC.
We also alter the 'efi-rs' to be 'efi=rs' or 'efi=no-rs'.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
After the first call to ExitBootServices(), avoid calling any boot
services (except GetMemoryMap() and ExitBootServices()) by setting
setting efi_bs to NULL and halting in blexit(). Only GetMemoryMap() and
ExitBootServices() are explicitly allowed to be called after the first
call to ExitBootServices() and so are are called via
SystemTable->BootServices.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Destination pages need mappings to be added to the page tables in the
v1 case (where nothing else calls machine_kexec_add_page() for them).
Further, without the tools mapping the low 1Mb (expected by at least
some Linux version), we need to do so in the hypervisor in the v1 case.
Suggested-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Alan Robinson <alan.robinson@ts.fujitsu.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
admin_io_okay(), guest_io_read(), and guest_io_write() all don't need
their current "regs" parameter at all, and they don't use the vCPU
passed to them for other than obtaining its domain. Drop the former and
replace the latter by a struct domain pointer.
pci_cfg_okay() returns a boolean type, and its "write" parameter is of
boolean kind too.
All of them get called for the current vCPU (and hence current domain)
only, so name the domain parameters accordingly except in the
admin_io_okay() case, which a subsequent patch will use for simplifying
setup_io_bitmap().
Latch current->domain into a local variable in emulate_privileged_op().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Being a pre-3.1 compatibility hypercall handler only, it's not needed
on ARM or any future architectures Xen may get ported to.
Also the function shouldn't really be used internally - its use should
be limited to its purpose (and hence there's also no need for a
prototype).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@cirix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Printing pointers to struct domain isn't really useful for initial
problem analysis. In get_page() also drop the page only after issuing
the log message, so that at the time of printing the state can be
considered reasonably consistent.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Currently, the BSP's stack is the BSS symbol cpu0_stack. In builds using
memguard_stack(), a page gets shot out of the mappings.
To avoid shattering the superpage which will eventually map the BSS, use the
directmap virtual address of cpu0_stack, while still using the same underlying
physical memory. (Xen has an order 21 physical relocation requirement meaning
that the order 3 alignment requirement for cpu0_stack will be honoured even
via its diretmap mapping.)
In addition, fix two issues exposed by the changes.
* do_invalid_op() should use is_active_kernel_text() rather than having its
own, different, idea of when to search through the bugframes.
* Setting of system_state to active needs to be deferred until after code has
left .init.text, for bugframes/backtraces to function in reinit_bsp_stack().
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
* Introduce symbols bounding the multiboot1 header, which helps clarify that
it is data and not code corruption when viewing the disassembly.
* Move the __high_start symbol to its implementation, and declare it
correctly as ENTRY()
* Move the l1_identmap construction to be with all the other pagetables, and
within __page_tables_{start,end}. This won't affect the EFI relocation
algorithm, as l1_identmap contains no relocations.
* Move the cpu0_stack alignment check to the linker. Chances are very good
that a binary with a misaligned stack won't get as far as the test.
* Use MB() in linker script.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Introduced by c/s 376bbba "sched_rt: print useful affinity info when dumping".
If the allocation of cpumask failed, prv was leaked.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Coverity-ID: 1304398
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
The read emulation of the register IROUTER contains lots of uncessary
code as irouter is already valid and doesn't need any processing before
setting the value in a register.
Also take the opportunity to factorize the code to find a vCPU from the
affinity in a single place. It will be easier to change the way to do it
later.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Cc: Chen Baozi <cbz@baozis.org>
Acked-by: Chen Baozi <baozich@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
As suggested by Andrew Cooper, this patch attempts to remove
some redundancy and allow for an easier time when adding vm_events
for new control registers in the future, by having a single
VM_EVENT_REASON_WRITE_CTRLREG vm_event type, meant to serve CR0,
CR3, CR4 and (newly introduced) XCR0. The actual control register
will be deduced by the new .index field in vm_event_write_ctrlreg
(renamed from vm_event_mov_to_cr).
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
As the first step of memory management cleanup, introduce the common code to
mfn_t, gfn_t and pfn_t.
The typesafe construction moves to its own header file, while the declarations
and sentinal values are moved to being common.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Checking that the subject domain is not the current one is pointless
when already having paused that domain: domain_pause() already
ASSERT()s this to be the case.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
binutils 2.22 changed ld default from --copy-dt-needed-entries
to -no-copy-dt-needed-entries. This revealed that some objects
are linked implicitly with libtinfo and newer ld fails to build
relevant executables.
Below is short explanation why we should not do that...
http://fedoraproject.org/wiki/UnderstandingDSOLinkChange says:
The default behaviour for ld (my note: before version 2.22) allows
users to 'indirectly' link to required objects/libraries through
intermediate objects/libraries. While this is convenient, it can
also be dangerous because it makes your program's dependencies tied
to the dependencies of other objects. If those objects ever change
their linkages, they can break your program without any changes
to your own code!
Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The GIC hip04 driver was differring from GICv2. I suspect that some of
the changes in the common GIC code make boot fail on hip04. Although, I
don't have a platform to check so it has been only build tested.
List of GICv2 commit ported to the HIP04:
commit ce12e6dba4b2d120e35dffd95a745452224e7144
Author: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Date: Fri Apr 10 16:21:10 2015 +1000
xen/arm: Don't write to GICH_MISR
GICH_MISR is read-only in GICv2.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Reviewed-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
commit 2eb4f996547dc632aa94b2b7b4f783bec8ffe457
Author: Julien Grall <julien.grall@linaro.org>
Date: Wed Apr 1 17:21:47 2015 +0100
xen/arm: gic: GICv2 & GICv3 only supports 1020 physical interrupts
GICD_TYPER.ITLinesNumber can encode up to 1024 interrupts. Although,
IRQ 1020-1023 are reserved for special purpose.
The result is used by the callers of gic_number_lines in order to check
the validity of an IRQ.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Frediano Ziglio <frediano.ziglio@huawei.com>
Cc: Zoltan Kiss <zoltan.kiss@huawei.com>
commit e2d486b385ce58b6db7561417de28ba837dcd4ac
Author: Julien Grall <julien.grall@linaro.org>
Date: Wed Apr 1 17:21:34 2015 +0100
xen/arm: Divide GIC initialization in 2 parts
Currently the function to translate IRQ from the device tree is set
unconditionally to be able to be able to retrieve serial/timer IRQ
before the GIC has been initialized.
It assumes that the xlate function won't ever changed. We may also need
to have the primary interrupt controller very early.
Rework the gic initialization in 2 parts:
- gic_preinit: Get the interrupt controller device tree node and
set up GIC and xlate callbacks
- gic_init: Initialize the interrupt controller and the boot CPU
interrupts.
The former function will be called just after the IRQ subsystem as been
initialized.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Frediano Ziglio <frediano.ziglio@huawei.com>
Cc: Zoltan Kiss <zoltan.kiss@huawei.com>
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Cc: Zoltan Kiss <zoltan.kiss@huawei.com>
Reviewed-by: Zoltan Kiss <zoltan.kiss@huawei.com>
Tested-by: Shameerali Kolothum Thodi <shameerali.kolothum.thodi@huawei.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The snippet to destroy stubdom and the callback were added in 1fc3aeb3
("libxl: use new QEMU xenstore protocol"). The intention was to destroy
stubdom when it is not responsive. That approach is problematic because
rc is not propagate back to sdss->callback, hence the guest is leaked.
The solution is simple. The destruction of stubdom can be done later in
sdss->callback. That code path already does the right thing to destroy
both the guest and the stubdom that serves the guest.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This patch does two thing:
The original code erroneously fills in xc_hvm_build_args before
generating vmemranges. The effect is that guest memory is populated
without vNUMA information. Move the hunk to right place to fix this.
Move the subtraction of video ram to libxl__vnuma_build_vmemrange_hvm
because it's the central place for generating vmemranges.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Make the setup process similar to PV counterpart. That is, to allocate a
P2M array that covers the whole memory range and start from there. This
is clearer than using an array with no holes in it.
Also the dummy layout should take MMIO hole into consideration. We might
end up having two vmemranges in the dummy layout.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When building HVM guests, originally some fields of xc_hvm_build_args
are filled in xc_hvm_build (and buried in the wrong function), some are
set in libxl__build_hvm before passing xc_hvm_build_args to
xc_hvm_build. This is fragile.
After examining the code in xc_hvm_build that sets those fields, we can
in fact move setting of mmio_start etc in libxl. This way we consolidate
memory layout setting in libxl.
The setting of firmware data related fields is left in xc_hvm_build
because it depends on parsing ELF image. Those fields only point to
scratch data that doesn't affect memory layout.
There should be no change in the generated guest memory layout. But the
semantic is changed for xc_hvm_build. Toolstack that built directly on
top of libxc need to adjust to this change.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: "Chen, Tiejun" <tiejun.chen@intel.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This is useful for debugging low level kernel before the guest as setup
the vector table.
Note that the value of the IPA is only here for reference and may not
always be valid if the error came from a stage 1 table translation walk.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- dropped spurious w/s change ]
When FLASK_{GET,SET}BOOL is called with a named boolean, the call to
flask_security_resolve_bool is made prior to bool_maxstr being populated
by flask_security_make_bools. This results in the maximum string length
being specified as zero, which is not useful. While it would be
possible to initialize bool_maxstr correctly prior to its use, it is
simpler to use a fixed maximum of PAGE_SIZE as is done for the other
calls to safe_copy_string_from_guest.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Migration and HVM domain creation both trigger AVC denials that should
be allowed in the default policy; add these rules.
Guest console writes need to be either allowed or denied without audit
depending on the decision of the local administrator; introduce a policy
boolean to switch between these possibilities.
Reported-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Using gdbsx on Broadwell systems suffers a SMAP violation because
dbg_rw_guest_mem() uses memcpy() with a userspace pointer.
The functions dbg_rw_mem() and dbg_rw_guest_mem() have been updated to pass
'void * __user' pointers which indicates their nature clearly.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Experimentally, this can result in memory allocation, and in particular a
failed assertion that interrupts are enabled when performing a TLB flush.
(XEN) Assertion 'local_irq_is_enabled()' failed at smp.c:223
<snip>
(XEN) [<ffff82d08018a0d3>] flush_area_mask+0x7/0x134
(XEN) [<ffff82d08011f7c6>] alloc_domheap_pages+0xa9/0x12a
(XEN) [<ffff82d08011f8ab>] alloc_xenheap_pages+0x64/0xdb
(XEN) [<ffff82d080178e08>] alloc_xen_pagetable+0x1c/0xa0
(XEN) [<ffff82d08017926b>] virt_to_xen_l1e+0x38/0x1be
(XEN) [<ffff82d080179bff>] map_pages_to_xen+0x80e/0xfd9
(XEN) [<ffff82d080185a23>] __set_fixmap+0x2c/0x2e
(XEN) [<ffff82d0801a6fd4>] machine_crash_shutdown+0x186/0x2b2
(XEN) [<ffff82d0801172bb>] kexec_crash+0x3f/0x5b
(XEN) [<ffff82d0801479b7>] panic+0x100/0x118
(XEN) [<ffff82d08019002b>] set_guest_machinecheck_trapbounce+0/0x6d
(XEN) [<ffff82d080195c15>] do_page_fault+0x40b/0x541
(XEN) [<ffff82d0802345e0>] handle_exception_saved+0x2e/0x6c
Instead, use the directmap mapping which are writable and involve far less
complexity than set_fixmap()
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
__stop_this_cpu() may reset the LAPIC mode back from x2apic to xapic, but will
leave x2apic_enabled alone. This may cause disconnect_bsp_APIC() in
disable_IO_APIC() to suffer a #GP fault.
Disabling the LAPIC can safely be deferred to being the last action.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
The commit 376bbbabbd "sched_rt: print useful
affinity info when dumping" breaks build on ARM64:
sched_rt.c: In function ‘rt_init’:
sched_rt.c:442:26: error: assignment from incompatible pointer type [-Werror]
_cpumask_scratch = xmalloc_array(cpumask_var_t, nr_cpu_ids);
^
sched_rt.c: In function ‘rt_alloc_pdata’:
sched_rt.c:489:29: error: passing argument 1 of ‘alloc_cpumask_var’ from incompatible pointer type [-Werror]
if ( !alloc_cpumask_var(&_cpumask_scratch[cpu]) )
This is because cpumask_var_t is not a type alias to cpumask_t** when
the number of CPU > 2 * BITS_PER_LONG. The correct type for
_cpumask_scratch should be cpumask_var_t*.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
If calling ExitBootServices() fails, the required memory map size may
have increased. When initially allocating the memory map, allocate a
slightly larger buffer (by an arbitrary 8 entries) to fix this.
The ARM code path was already allocating a larger buffer than required,
so this moves the code to be common for all architectures.
This was seen on the following machine when using the iscsidxe UEFI
driver. The machine would consistently fail the first call to
ExitBootServices().
System Information
Manufacturer: Supermicro
Product Name: X10SLE-F/HF
BIOS Information
Vendor: American Megatrends Inc.
Version: 2.00
Release Date: 04/24/2014
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roy Franz <roy.franz@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In fact, printing the cpupool's CPU online mask
for each vCPU is just redundant, as that is the
same for all the vCPUs of all the domains in the
same cpupool, while hard affinity is already part
of the output of dumping domains info.
Instead, print the intersection between hard
affinity and online CPUs, which is --in case of this
scheduler-- the effective affinity always used for
the vCPUs.
This change also takes the chance to add a scratch
cpumask area, to avoid having to either put one
(more) cpumask_t on the stack, or dynamically
allocate it within the dumping routine. (The former
being bad because hypervisor stack size is limited,
the latter because dynamic allocations can fail, if
the hypervisor was built for a large enough number
of CPUs.) We allocate such scratch area, for all pCPUs,
when the first instance of the RTDS scheduler is
activated and, in order not to loose track/leak it
if other instances are activated in new cpupools,
and when the last instance is deactivated, we (sort
of) refcount it.
Such scratch area can be used to kill most of the
cpumasks{_var}_t local variables in other functions
in the file, but that is *NOT* done in this chage.
Finally, convert the file to use keyhandler scratch,
instead of open coded string buffers.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Meng Xu <mengxu@cis.upenn.edu>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Jan Beulich
Andrew Cooper
David Vrabel
Konrad Rzeszutek Wilk
Ross Lagerwall
Ian Jackson
Alan Robinson
Ian Campbell
Julien Grall
Razvan Cojocaru
Daniel Kiper
Wei Liu
Daniel De Graaf
Olaf Hering
Dario Faggioli