Function xsm_vm_event_control() is only invoked under CONFIG_VM_EVENT, so
it shall be wrapped with it, otherwise it will become unreachable when
VM_EVENT=n and hence violating Misra rule 2.1.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
To make codes less fragile, we limit the scope of "rc" through adding several
instances in relatively narrow scopes. We also fixes wrong indentation.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Helper vcpu_set_soft_affinity() only has a single caller, so it is of little
value to keep it as a helper and could easily be expanded at the sole call
site.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
The only reference of hvm_copy_context_and_params() is in
arch/x86/mm/mem_sharing.c, so it shall be wrapped with CONFIG_MEM_SHARING.
Otherwise it will become unreachable when MEM_SHARING=n, and hence violating
Misra rule 2.1.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Grygorii Strashko <grygorii_strashko@epam.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
HWP and amd-cppc-epp are both governor-less driver, so we introduce
"is_governor_less" flag and cpufreq_is_governorless() to help bypass
governor-related info on dealing with cpufreq para.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
We extract cppc info from "struct xen_get_cpufreq_para", where it acts as
a member of union, and share the space with governor info.
However, it may fail in amd-cppc passive mode, in which governor info and
CPPC info could co-exist, and both need to be printed together via xenpm tool.
If we tried to still put it in "struct xen_get_cpufreq_para" (e.g. just move
out of union), "struct xen_get_cpufreq_para" will enlarge too much to further
make xen_sysctl.u exceed 128 bytes.
So we introduce a new sub-field GET_CPUFREQ_CPPC to dedicatedly acquire
CPPC-related para, and make get-cpufreq-para invoke GET_CPUFREQ_CPPC
if available.
New helpers print_cppc_para() and get_cpufreq_cppc() are introduced to
extract CPPC-related parameters process from cpufreq para.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com> # hypervisor
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Even if Xen governor is not used in amd-cppc active mode, we could
somehow deduce which performance policy (CPUFREQ_POLICY_xxx) user wants to
apply through which governor they choose, such as:
If user chooses performance governor, they want maximum performance, then
the policy shall be CPUFREQ_POLICY_PERFORMANCE
If user chooses powersave governor, they want the least power consumption,
then the policy shall be CPUFREQ_POLICY_POWERSAVE
Function cpufreq_policy_from_governor() is responsible for above transition,
and it shall be also effective when users setting new governor through xenpm.
Userspace is a forbidden choice, and if users specify such option, we shall
not only give warning message to suggest using "xenpm set-cpufreq-cppc", but
also error out.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
amd-cppc has 2 operation modes: autonomous (active) mode and
non-autonomous (passive) mode.
In active mode, we don't need Xen governor to calculate and tune the cpu
frequency, while hardware built-in CPPC power algorithm will calculate the
runtime workload and adjust cores frequency automatically according to the
power supply, thermal, core voltage and some other hardware conditions.
In active mode, CPPC ignores requests done in the desired performance field,
and takes into account only the values set to the minimum performance, maximum
performance, and energy performance preference registers.
A new field EPP (energy performance preference), in CPPC request register, is
introduced. It will be used in the CCLK DPM controller to drive the frequency
that a core is going to operate during short periods of activity, called
minimum active frequency, It could contatin a range of values from 0 to 0xff.
An EPP of zero sets the min active frequency to maximum frequency, while
an EPP of 0xff sets the min active frequency to approxiately Idle frequency.
We implement a new AMD CPU frequency driver `amd-cppc-epp` for active mode.
It requires `active` tag in Xen cmdline for users to explicitly select active
mode.
In driver `active-cppc-epp`, ->setpolicy() is hooked, not the ->target(), as
it does not depend on xen governor to do performance tuning.
We also introduce a new field "policy" (CPUFREQ_POLICY_xxx) to represent
performance policy. Right now, it supports three values:
CPUFREQ_POLICY_PERFORMANCE as maximum performance, CPUFREQ_POLICY_POWERSAVE
as the least power consumption, and CPUFREQ_POLICY_ONDEMAND as no preference,
just corresponding to "performance", "powersave" and "ondemand" Xen governor,
which benefit users from re-using "governor" in Xen cmdline to deliver
which performance policy they want to apply.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
amd-cppc is the AMD CPU performance scaling driver that introduces a
new CPU frequency control mechanism. The new mechanism is based on
Collaborative Processor Performance Control (CPPC) which is a finer grain
frequency management than legacy ACPI hardware P-States.
Current AMD CPU platforms are using the ACPI P-states driver to
manage CPU frequency and clocks with switching only in 3 P-states, while the
new amd-cppc allows a more flexible, low-latency interface for Xen
to directly communicate the performance hints to hardware.
"amd-cppc" driver is responsible for implementing CPPC in passive mode, which
still leverages Xen governors such as *ondemand*, *performance*, etc, to
calculate the performance hints. In the future, we will introduce an advanced
active mode to enable autonomous performence level selection.
Field epp, energy performance preference, which only has meaning when active
mode is enabled and will be introduced later in details, so we read
pre-defined BIOS value for it in passive mode.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Right now, no matter for code construction or hardware restriction, HW_ALL
shall be the only expected values in _PSD for AMD CPPC mode
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Flag PG_log_dirty is for paging log dirty support, not vram tracking support.
However data structure sh_dirty_vram{} and function paging_log_dirty_range()
designed for vram tracking support, are guarded with PG_log_dirty.
We release both from PG_log_dirty, and also move paging_log_dirty_range(),
remamed with p2m_log_dirty_range(), into p2m.c, where it logically belongs.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Users need to set "cpufreq=amd-cppc" in xen cmdline to enable amd-cppc driver,
which selects ACPI Collaborative Performance and Power Control (CPPC) on
supported AMD hardware to provide a finer grained frequency control mechanism.
`verbose` option can also be included to support verbose print.
When users setting "cpufreq=amd-cppc", a new amd-cppc driver
shall be registered and used. All hooks for amd-cppc driver are transiently
missing, and we temporarily make registration fail with -EOPNOTSUPP here. It
will be fixed along with the implementation.
New xen-pm internal flag XEN_PROCESSOR_PM_CPPC is introduced, to stand for
cpufreq driver in CPPC mode. We define XEN_PROCESSOR_PM_CPPC 0x100, as it is
the next value to use after 8-bits wide public xen-pm options. We also add
sanity check on compile time. All XEN_PROCESSOR_PM_xxx checking shall be
updated to consider "XEN_PROCESSOR_PM_CPPC" too.
XEN_PROCESSOR_PM_CPPC and XEN_PROCESSOR_PM_PX are firstly set when Xen parsed
relative driver signature from xen cmdline, and will become exclusive after
cpufreq driver registration. It is because that platform could not support
both or mixed mode (CPPC & legacy Px) operations, and only one cpufreq driver
could be registerd in Xen at one time, such as on AMD, it is either amd-cppc
or legacy P-states driver.
Xen rely on XEN_PROCESSOR_PM_CPPC flag to tell current cpufreq driver is in
CPPC mode, and accepts relative hypercall. It will neglect Px request and
yields success.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In order to provide backward compatibility with existing governors
that represent performance as frequency, like ondemand, the _CPC
table can optionally provide processor frequency range values, Lowest
frequency and Nominal frequency, to let OS use Lowest Frequency/
Performance and Nominal Frequency/Performance as anchor points to
create linear mapping of CPPC performance to CPU frequency.
As Xen is uncapable of parsing the ACPI dynamic table, we'd like to
introduce a new sub-hypercall "XEN_PM_CPPC" to propagate required CPPC
data from dom0 kernel to Xen.
In the according handler set_cppc_pminfo(), we do _CPC and _PSD
sanitization check, as both _PSD and _CPC info are necessary for correctly
initializing cpufreq cores in CPPC mode.
Users shall be warned that if we failed at this point,
no fallback scheme, like legacy P-state could be switched to.
A new flag "XEN_CPPC_INIT" is also introduced for cpufreq core initialised in
CPPC mode. Then all .init flag checking shall be updated to
consider "XEN_CPPC_INIT" too.
We want to bypass construction of px statistic info in cpufreq_statistic_init()
for CPPC mode, while not bypassing cpufreq_statistic_lock initialization for a
good reason. The same check is unnecessary for cpufreq_statistic_exit(),
since it has already been covered by px statistic variable
"cpufreq_statistic_data" check
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
A helper function handle_cpufreq_cmdline() is introduced to tidy different
handling pathes.
We also add a new helper cpufreq_opts_contain() to ignore redundant setting,
like "cpufreq=hwp;hwp;xen"
As only slot 0 of cpufreq_xen_opts[] needs explicit initializing with
non-zero CPUFREQ_xen, dropping full array initializer could avoid touching
initializer every time it grows
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Since we are missing default case for x86 vendor, there is possibility (i.e.
new vendor introduced) that we will return successfully while missing the
whole cpufreq driver initialization process.
Move "ret = -ENOENT" forward to cover default case for x86 vendor, and add
error log.
Requested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Change "balance" to "ondemand" in help info for "xenpm set-cpufreq-cppc"
Fixes: 81ce87fc5e (xen/cpufreq: rename cppc preset name to "XEN_SYSCTL_CPPC_SET_PRESET_ONDEMAND")
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
As we are going to add "struct xen_cppc_para" in "struct xen_sysctl_pm_op" as
a new xenpm sub-op later to specifically dealing with CPPC-info, we need to
follow the naming pattern, to change the struct name to "xen_get_cppc_para",
which is more suitable than "xen_cppc_para".
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
In `xenpm get-cpufreq-para <cpuid>`, ->freq_num and ->cpu_num checking are
tied together via variable "has_num", while ->freq_num only has non-zero value
when cpufreq driver in legacy P-states mode.
So we drop the "has_num" condition check, and mirror the ->gov_num check for
both ->freq_num and ->cpu_num in xc_get_cpufreq_para().
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
In order to fix CI error of a randconfig picking both PV_SHIM_EXCLUSIVE=y and
HVM=y results in hvm.c being built, but domctl.c not being built, which leaves
a few functions, like domctl_lock_acquire/release() undefined, causing linking
to fail.
To fix that, we intend to move domctl.o out of the PV_SHIM_EXCLUSIVE Makefile
/hypercall-defs section, with this adjustment, we also need to remove
redundant vnuma_destroy() stub definition to not break compilation.
Above change will leave dead code in the shim binary temporarily and will be
fixed with the introduction of CONFIG_DOMCTL.
Fixes: 568f806cba ("xen/x86: remove "depends on !PV_SHIM_EXCLUSIVE"")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Since we move "!PV_SHIM_EXCLUSIVE" dependency from CONFIG_HVM, there is
a chance that a randconfig picking both PV_SHIM_EXCLUSIVE=y and HVM=y results
in hvm.c being built, but monitor.c not being built, which leaves
functions like monitor_traps(), etc, undefined, causing linking to fail.
So we move monitor.o out of PV_SHIM_EXCLUSIVE condition to fix above linking
failure.
Fixes: 568f806cba ("xen/x86: remove "depends on !PV_SHIM_EXCLUSIVE"")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
DOM0 could deliever whatever performance statistic (Px, _CPC) it parses, it is
Xen's responsibility to decide which one it shall accept.
Xen rely on XEN_PROCESSOR_PM_xxx flag to tell which mode ( Px or CPPC )
current cpufreq driver supports, and accepts relative info. It will neglect
unsupported-mode request and yields success.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
"ondemand" is more suitable to describe a preset in which epp value is set
with medium(CPPC_ENERGY_PERF_BALANCE), showing no preference over performance or
powersave, minimum with lowest and maximum with highest.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
_PSD info, consisted of "shared_type" and "struct xen_psd_package", will not
only be provided from px-specific "struct xen_processor_performance", but also
in CPPC data.
Two new helper functions are introduced to deal with _PSD. They will later be
re-used for handling the same data for CPPC.
In the meantime, the following style corrections get applied at the same time:
- add extra space before and after bracket of if()
- remove redundant parenthesis
- no need to put brace for printk() at a seperate line
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Right now, only when we failed cpufreq driver registration with -ENODEV, we get
the chance to try the fallback option.
There are two code path erroring out other than -ENODEV in cpufreq driver
registration: one is when the driver itself is broken, like missing mandatory
hooks, cpufreq_register_driver() will fail with -EINVAL, in which we shall
be able to try the fallback option, and the other is -EBUSY due to repeated
registration, in which we shall just exit the loop.
So in conclusion, when error code is -EBUSY or successful return, both
indicating a proper driver is already registered, we shall bail the loop,
other than that, we shall continue to try the fallback option.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Remove all "depends on !PV_SHIM_EXCLUSIVE" (also the functionally
equivalent "if !...") in Kconfig file, since negative dependancy will badly
affect allyesconfig. Although "if !PV_SHIM_EXCLUSIVE" for CONFIG_VGA is not
truly a dependency, setting PV_SHIM_EXCLUSIVE y still makes it unconfigurable.
So we remove it here too
Add "#CONFIG_xxx is not set" for above options in presets for x86 PV shim, as
the explicit declaration is to ephasize setting for the shim is different
from the general default.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Function arch_do_sysctl is to perform arch-specific sysctl op.
Some functions, like psr_get_info() for x86, DTB overlay support for arm,
are solely available through sysctl op, then they all shall be wrapped
with CONFIG_SYSCTL
Also, remove all #ifdef CONFIG_SYSCTL-s in arch-specific sysctl.c, as
we put the guardian in Makefile for the whole file.
Since PV_SHIM_EXCLUSIVE needs sorting in the future, we move
obj-$(CONFIG_SYSCTL) += sysctl.o out of PV_SHIM_EXCLUSIVE condition.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Signed-off-by: Sergiy Kibrik <Sergiy_Kibrik@epam.com>
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Function sched_adjust_global is designed for XEN_SYSCTL_scheduler_op, so
itself and its calling flow, like .adjust_global, shall all be wrapped.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Stewart Hildebrand <stewart@stew.dk> #a653
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
The following functions are only to deal with XEN_SYSCTL_page_offline_op,
then shall be wrapped:
- xsm_page_offline()
- online_page()
- query_page_offline()
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
The following functions is to deal with XEN_SYSCTL_readconsole sub-op, and
shall be wrapped:
- xsm_readconsole()
- read_console_ring()
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
When _CPC table could not provide processor frequency range
values for Xen governor, we need to read processor max frequency
as anchor point.
So we extract amd cpu core frequency calculation logic from amd_log_freq(),
and wrap it as a new helper amd_process_freq().
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
We introduce a new Kconfig CONFIG_PM_STATS for wrapping all operations
regarding performance management statistics.
The major codes reside in xen/drivers/acpi/pmstat.c, including the
pm-statistic-related sysctl op: do_get_pm_info().
CONFIG_PM_STATS also shall depend on CONFIG_SYSCTL
We shall also provide "# CONFIG_PM_STATS is not set" in preset configs for
PV shim on x86.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
We move the following functions into a new file drivers/acpi/pm-op.c, as
they are all more fitting in performance controling and only called by
do_pm_op():
- get_cpufreq_para()
- set_cpufreq_para()
- set_cpufreq_gov()
- set_cpufreq_cppc()
- cpufreq_driver_getavg()
- cpufreq_update_turbo()
- cpufreq_get_turbo_status()
We introduce a new Kconfig CONFIG_PM_OP to wrap the new file.
Also, although the following helpers are only called by do_pm_op(), they have
dependency on local variable, we wrap them with CONFIG_PM_OP in place:
- write_userspace_scaling_setspeed()
- write_ondemand_sampling_rate()
- write_ondemand_up_threshold()
- get_cpufreq_ondemand_para()
- cpufreq_driver.update()
- get_hwp_para()
Various style corrections shall be applied at the same time while moving these
functions, including:
- add extra space before and after bracket of if() and switch()
- fix indentation
- drop all the unnecessary inner figure braces
We shall also provide "# CONFIG_PM_OP is not set" in preset configs for
PV shim on x86.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Function cpupool_do_sysctl is designed for doing cpupool related sysctl
operations, and shall be wrapped.
The following static functions are only called by cpupool_do_sysctl(), then
shall be wrapped too:
- cpupool_get_next_by_id
- cpupool_destroy
- cpupool_unassign_cpu_helper
- cpupool_unassign_cpu
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Users rely on SYSCTL_coverage_op hypercall to interact with the coverage data,
that is, according operations shall be wrapped around with CONFIG_SYSCTL.
Right now, it is compiled under CONFIG_COVERAGE, so we shall make
CONFIG_COVERAGE depend on CONFIG_SYSCTL.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
The following functions are only used to deal with XEN_SYSCTL_physinfo,
then they shall be wrapped:
- arch_do_physinfo()
- get_outstanding_claims()
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
The following function is only to serve spinlock profiling via
XEN_SYSCTL_lockprof_op, so it shall be wrapped:
- spinlock_profile_control()
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
perfc_control() and perfc_copy_info() are responsible for providing control
of perf counters via XEN_SYSCTL_perfc_op in DOM0, so they both shall
be wrapped.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Users could only access trace buffers via hypercall XEN_SYSCTL_tbuf_op,
so we shall make CONFIG_TRACEBUFFER depend on CONFIG_SYSCTL
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Instead of using hypercall passing parameter to identify hwp driver,
we shall use hwp_active(). Also, we've already used hwp_active() in
do_get_pm_info() in the same file to do hwp driver check, it's
better syncing with same way.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
AMD Family 1Ah CPU needs a different COF(Core Operating Frequency) formula,
due to a change in the PStateDef MSR layout in AMD Family 1Ah.
In AMD Family 1Ah, Core current operating frequency in MHz is calculated as
follows:
CoreCOF = Core::X86::Msr::PStateDef[CpuFid[11:0]] * 5MHz
We introduce a helper amd_parse_freq() to parse COF(Core Operating Frequency)
from PstateDef register, to replace the original macro FREQ(v).
amd_parse_freq() is declared as const, as it mainly consists of mathematical
conputation.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
AMD cpufreq cores will be intialized in two modes, legacy P-state mode,
and CPPC mode. So "init" flag shall be extracted from px-specific
"struct xen_processor_perf", and placed in the common
"struct processor_pminfo". Otherwise, later when introducing a new
sub-hypercall to propagate CPPC data, we need to pass irrelevant px-specific
"struct xen_processor_perf" to just set init flag.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Function avail_domheap_pages() is only invoked by get_outstanding_claims(),
so it could be inlined into get_outstanding_claims().
Move up avail_heap_pages() to avoid declaration before
get_outstanding_claims().
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
We move the following functions into drivers/acpi/pmstat.c, as they
are all designed for performance statistic:
- cpufreq_residency_update()
- cpufreq_statistic_reset()
- cpufreq_statistic_update()
- cpufreq_statistic_init()
- cpufreq_statistic_exit()
Consequently, variable "cpufreq_statistic_data" and "cpufreq_statistic_lock"
shall become static.
We also move out acpi_set_pdc_bits(), as it is the handler for sub-hypercall
XEN_PM_PDC, and shall stay with the other handlers together in
drivers/cpufreq/cpufreq.c.
Various style corrections shall be applied at the same time while moving these
functions, including:
- brace for if() and for() shall live at a seperate line
- add extra space before and after bracket of if() and for()
- use array notation
- convert uint32_t into unsigned int
- convert u32 into uint32_t
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
amd-cppc on active mode bypasses the scaling governor layer, and
provides its own P-state selection algorithms in hardware. Consequently,
when it is used, the driver's -> setpolicy() callback is invoked
to register per-CPU utilization update callbacks, not the ->target()
callback.
So, only when cpufreq_driver.setpolicy is NULL, we need to deliberately
set old gov as NULL to trigger the according gov starting.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This commit fixes return type of online_page(), which shall be int
to include correct error value.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Intel's hwp Energy Performance Preference value is compatible with
CPPC's Energy Performance Preference value, so this commit abstracts
the value and re-place it in common header file cpufreq.h, to be
used not only for hwp in the future.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add Collaborative Processor Performance Control feature flag for
AMD processors.
amd-cppc is the AMD CPU performance scaling driver that
introduces a new CPU frequency control mechanism on modern AMD
APU and CPU series.
There are two types of hardware implementations: "Full MSR Support"
and "Shared Memory Support".
Right now, xen will only implement "Full MSR Support", and this new
feature flag indicates whether processor has this feature or not.
Signed-off-by: Penny Zheng <Penny.Zheng@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Penny Zheng