The commit 3e322bef8b ("xen/arm: firmware: Add SCMI over SMC calls
handling layer") introduces simple driver which forwards SCMI over SMC
calls from hwdom/dom0 to EL3 firmware (TF-A) with a single SCMI OSPM agent
support. While it is working gracefully for hwdom/dom0 use case it doesn't
cover "thin Dom0 with guest domain, which serves as Driver domain"
use-case. In this case HW need to be enable in Driver domain and dom0 is
performing only control functions.
The EL3 SCMI firmware (TF-A) with a single SCMI OSPM agent support is
pretty generic case for the default vendors SDK and new platforms.
This patch enables passthrough of SCMI SMC single agent interface to the
one guest domain serving as Driver domain.
Configure Dom0 to enable SCMI passthrough:
- dom0: add scmi-smc-passthrough to the Xen Command Line
Enabled SCMI passthrough for guest using toolstack in the following way:
- domD: xl.cfg add "arm_sci" option as below
arm_sci = "type=scmi_smc"
- domD: xl.cfg enable access to the "arm,scmi-shmem"
iomem = [
"47ff0,1@22001",
]
- domD: add SCMI nodes to the Driver domain partial device tree as in the
below example:
passthrough {
scmi_shm_0: sram@22001000 {
compatible = "arm,scmi-shmem";
reg = <0x0 0x22001000 0x0 0x1000>;
};
firmware {
compatible = "simple-bus";
scmi: scmi {
compatible = "arm,scmi-smc";
shmem = <&scmi_shm_0>;
...
}
}
}
dom0less case configuration:
- add "xen,sci_type" property for required DomU ("xen,domain") node
xen,sci_type="scmi_smc"
- add scmi nodes to the Driver domain partial device tree the same way
as above and enable access to the "arm,scmi-shmem" according to
dom0less documentation. For example:
scmi_shm_0: sram@22001000 {
compatible = "arm,scmi-shmem";
reg = <0x00 0x22001000 0x00 0x1000>;
-> xen,reg = <0x0 0x47ff0000 0x0 0x1000 0x0 0x22001000>;
-> xen,force-assign-without-iommu;
};
The SCMI SMC single agent interface can be enabled for one and only one
domain. In general, the configuration is similar to any other HW
passthrough, except explicitly enabling SCMI with "arm_sci" xl.cfg option.
Note that "arm,scmi-smc" and "arm,scmi-shmem" nodes will be removed from
dom0/hwdom DT when "scmi-smc-passthrough" cmdline parameter was provided.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech> # tools
The introduced SCI (System Control Interface) subsystem provides unified
interface to integrate in Xen SCI drivers which adds support for ARM
firmware (EL3, SCP) based software interfaces (like SCMI) that are used in
system management. The SCI subsystem allows to add drivers for different FW
interfaces or have different drivers for the same FW interface (for example,
SCMI with different transports).
This patch updates SCMI over SMC calls handling layer, introduced by
commit 3e322bef8b ("xen/arm: firmware: Add SCMI over SMC calls handling
layer"), to be SCI driver:
- convert to DT device;
- convert to SCI Xen interface.
There are no functional changes in general, the driver is just adopted
to the SCI interface.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Call stack for dom0less hwdom case (1:1) memory:
create_domUs
|-construct_domU
|-construct_hwdom()
|-allocate_memory_11()
And allocate_memory_11() uses "dom0_mem" as:
min_low_order =
get_order_from_bytes(min_t(paddr_t, dom0_mem, MB(128)));
In case of dom0less boot the "dom0_mem" is not used and defaulted to 0,
which causes min_low_order to get high value > order and so no allocations
happens from low memory.
Fix it, by using kinfo->unassigned_mem instead of "dom0_mem" which has
correct memory size in both cases: regular dom0 boot and dom0less boot.
Fixes: 52cb53f181 ("xen/arm: dom0less hwdom construction")
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Since commit 341f271cf8 ("xen/evtchn: fully restrict concept of pIRQ for
arches with pIRQ support only"), the corresponding PPC arch pIRQ callbacks
become unreachable, so drop them.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Since commit 341f271cf8 ("xen/evtchn: fully restrict concept of pIRQ for
arches with pIRQ support only"), the corresponding Arm arch pIRQ callbacks
become unreachable, so drop them.
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Julien Grall <jgrall@amazon.com>
On platforms without PIRQ support evtchn_move_pirqs()/send_guest_pirq()
functions are unreachable (Misra rule 2.1).
Move these function under CONFIG_HAS_PIRQ ifdefs to fix Misra rule 2.1
violation and resolve call of evtchn_move_pirqs() from common /sched/core.c
vcpu_move_irqs() code by moving evtchn_move_pirqs() into x86
arch_move_irqs() callback (which is converted to define).
Signed-off-by: Grygorii Strashko <grygorii_strashko@epam.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Juergen Gross <jgross@suse.com> # xen/sched
Grygorii Strashko