Make the bufdev and non-bufdev messages distinct, and always print the
non-constant argument (ie, the size).
This assists diagnosis.
CC: Andrew Cooper <andrew.cooper3@citrix.com>
CC: Hans van Kranenburg <hans@knorrie.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Xen 4.11 shipped with a SONAME of 1.1.
For staging (and 4.12 eventually), the SONAME was bumped to 1.2 by c/s
28ca696a3. Further changes before 4.12 ships should not bump the SONAME.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Versions of linux privcmd prior to commit dc9eab6fd94d ("return -ENOTTY
for unimplemented IOCTLs") will return -EINVAL rather than the conventional
-ENOTTY for unimplemented codes. This breaks the error path in
libxenforeignmemory resource mapping, which only translates ENOTTY into
EOPNOTSUPP to inform callers of the need to use an alternative (legacy)
mechanism.
This patch adds a new 'unimplemented' [1] ioctl code into the local
privcmd header which is then used to probe for the appropriate errno to
translate in the resource mapping error path
[1] this is a code that has, so far, never been used in any version of
privcmd and will be added to future versions of the header in the
linux source, to make sure it stays unimplemented.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add support for Linux grant device driver extension which allows
converting existing dma-buf's into an array of grant references
and vise versa. This is only implemented for Linux as other OSes
have no Linux dma-buf support.
Bump gnttab library minor version to 3.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Resource mapping is not supported on Arm and results to an error message
at every guest boot:
xenforeignmemory: error: ioctl failed: Operation not supported
Hide the error message when errnor is ENOTSUPP.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
xencall_alloc_buffer() is used throughout Xen tools for allocating
hypercall buffers. Allocation is done at page granularity. For simple
administration each allocated set of pages contains a small header
holding the number of pages of that set. The hypercall buffer is
located directly after the 4 byte sized header, leading to a wrong
alignment for e.g. pointers.
Repair that by using a 16 byte sized header enforcing the same
alignment as malloc().
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
For libxengnttab.map, introducing a new VERS* section must be matched with a
equivalent SONAME bump.
For libxencall.map, the hunk as presented would have been ok, if Xen 4.11
hadn't been released between xencall_buffers_never_fault() and xencall_fd()
being introduced. Given the timing of the release, xencall_fd() needs moving
into a new VERS_1.2 section.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Add a new function to query whether hypercall buffers are always safe
to access by the hypervisor or might result in EFAULT.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Instead of using anonymous memory for hypercall buffers which is then
locked into memory, use the hypercall buffer device of the Linux
privcmd driver if available.
This has the advantage of needing just a single mmap() for allocating
the buffer and page migration or compaction can't make the buffer
unaccessible for the hypervisor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Current interface to the gntdev in FreeBSD is wrong, and mostly worked
out of luck before the PTI FreeBSD fixes, when kernel and user-space
where sharing the same page tables.
On FreeBSD ioctls have the size of the passed struct encoded in the ioctl
number, because the generic ioctl handler in the OS takes care of
copying the data from user-space to kernel space, and then calls the
device specific ioctl handler. Thus using ioctl structs with variable
sizes is not possible.
The fix is to turn the array of structs at the end of
ioctl_gntdev_alloc_gref and ioctl_gntdev_map_grant_ref into pointers,
that can be properly accessed from the kernel gntdev driver using the
copyin/copyout functions. Note that this is exactly how it's done for
the privcmd driver.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
By using a static inline stub in private.h for OS where this functionality
is not implemented, the various duplicate stubs in the OS-specific source
modules can be avoided.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
A subsequent patch will introduce a new scheme to allow an emulator to
map ioreq server pages directly from Xen rather than the guest P2M.
This patch lays the groundwork for that change by deferring mapping of
gfns until their values are requested by an emulator. To that end, the
pad field of the xen_dm_op_get_ioreq_server_info structure is re-purposed
to a flags field and new flag, XEN_DMOP_no_gfns, defined which modifies the
behaviour of XEN_DMOP_get_ioreq_server_info to allow the caller to avoid
requesting the gfn values.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Remove the implementation of XEN_DOMCTL_pin_mem_cacheattr since it has
been replaced by a dmop. Change xc_domain_pin_memory_cacheattr() so
that it is only defined when XC_WANT_COMPAT_DEVICEMODEL_API is set and
have it call the new dmop. Leave the definitions of
XEN_DOMCTL_MEM_CACHEATTR_* since they are still used by QEMU.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Closing the fd before unhooking it from the list runs the risk that a
concurrent thread calls xentoolcore_restrict_all will operate on the
old fd value, which might refer to a new fd by then. So we need to do
it in the other order.
Sadly this weakens the guarantee provided by xentoolcore_restrict_all
slightly, but not (I think) in a problematic way. It would be
possible to implement the previous guarantee, but it would involve
replacing all of the close() calls in all of the individual osdep
parts of all of the individual libraries with calls to a new function
which does
dup2("/dev/null", thing->fd);
pthread_mutex_lock(&handles_lock);
thing->fd = -1;
pthread_mutex_unlock(&handles_lock);
close(fd);
which would be terribly tedious.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
Commit 89d55473ed "xentoolcore_restrict_all:
Implement for libxenevtchn" added a call to register allowing to
restrict the event channel.
However, the call to deregister the handler was not performed if open
failed or when closing the event channel. This will result to corrupt
the list of handlers and potentially crash the application later one.
Fix it by calling xentoolcore_deregister_active_handle on failure and
closure.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
Non-Linux hosts (where osdep_evtchn_restrict is not yet supported)
made use of errno without including errno.h, fix this by including the
header.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
Implement support for restricting evtchn handles to a particular domain
on Linux by calling the IOCTL_EVTCHN_RESTRICT_DOMID ioctl (support added
in Linux v4.8).
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Julien Grall <julien.grall@linaro.org>
Otherwise,
f942a9b4a1
xentoolcore_restrict_all: "Implement" for xenstore
breaks the build of the tools inside rumprun.
toolcore is in libs, so we need to add the CONFIG_RUMP special case to
tools/libs/Makefile and add toolcore there.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This necessitates adding $(CFLAGS_xeninclude) to all the depending
libraries (which can be done via Rules.mk), so that the definition of
domid_t (in xen.h) can be found.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
In practice, qemu opens a great many fds. Tracking them all down and
playing whack-a-mole is unattractive. It is also potentially fragile
in that future changes might accidentally undo our efforts.
Instead, we are going to teach all the Xen libraries how to register
their fds so that they can be neutered with one qemu call.
Right now, nothing will go wrong if some tries to link without
-ltoolcore, but that will stop working as soon as the first other Xen
library starts to register. So this patch will be followed by the
stubdom build update, and should be followed by a
MINIOS_UPSTREAM_REVISION updated.
Sadly qemu upstream's configuration arrangements are too crude, being
keyed solely off the Xen version number. So they cannot provide
forward/backward build compatibility across changes in xen-unstable,
like this one. qemu patches to link against xentoolcore should be
applied in qemu upstream so avoid the qemu build breaking against the
released version of Xen 4.10.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The pad field needs to be zero as required by the hypervisor.
Instead of setting the pad separately, use C99 initialiser.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Since ioreq servers are only relevant to HVM guests and all the names in
question unequivocally refer to guest frame numbers, name them all .*gfn
to avoid any confusion.
This patch is purely cosmetic. No semantic or functional change.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
DEPS_RM is currently the same as DEPS, so no functional change.
This patch is the result of two perl runes:
git-grep -l 'rm.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+rm\b/; s/\bDEPS\b/DEPS_RM/;'
git-grep -l 'RM.*DEPS' | xargs perl -i~ -pe 'next unless m/^\t+\$\(RM\)/; s/\bDEPS\b/DEPS_RM/;'
And editing tools/xenstat/libxenstat/Makefile by hand.
I verified that I didn't miss anything with this rune:
git-grep '\bDEPS\b' | grep -v include |less
Reported-by: Jan Beulich <JBeulich@suse.com>
CC: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The new function repeats the behavior of the first version
except it has an extended list of arguments which are subsequently
passed to mmap() call.
This is needed for QEMU depriviledging.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This new lib devicemodel call allows multiple extents of pages to be
marked as modified in a single call. This is something needed for a
usecase I'm working on.
The xen side of the modified_memory call has been modified to accept
an array of extents. The devicemodel library either provides an array
of length 1, to support the original library function, or a second
function allows an array to be provided.
Signed-off-by: Jennifer Herbert <Jennifer.Herbert@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
A new device model wrapper is added for the newly introduced
DMOP - XEN_DMOP_map_mem_type_to_ioreq_server.
Since currently this DMOP only supports the emulation of write
operations, attempts to trigger the DMOP with values other than
XEN_DMOP_IOREQ_MEM_ACCESS_WRITE or 0(to unmap the ioreq server)
shall fail. The wrapper shall be updated once read operations
are also to be emulated in the future.
Also note currently this DMOP only supports one memory type,
and can be extended in the future to map multiple memory types
to multiple ioreq servers, e.g. mapping HVMMEM_ioreq_serverX to
ioreq server X, This wrapper shall be updated when such change
is made.
Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 5823d6eb "add a call to restrict the handle" added a new function
to the foreignmemory API. This API is considered stable and so the new
function should be bound to a new version.
This patch creates version 1.1 of the API, dependent on version 1.0, and
binds the restrict call to version 1.1. Thus version 1.0 is as it was
before the new function was added.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>