This option is unique to x86 PV dom0's, but it is not sensible to have a
catch-all which blindly maps all non-RAM regions into the IOMMU.
The map-reserved option remains, and covers all the buggy firmware issues that
I am aware of. The two common cases are legacy USB keyboard emulation, and
the BMC mailbox used by vendor firmware in NICs/HBAs to report information
back to the iLO/iDRAC/etc for remote remote management purposes.
A specific advantage of this change is that x86 dom0's IOMMU setup is now
consistent between PV and PVH.
This change is not expected to have any impact, due to map-reserved remaining.
In the unlikely case that it does cause an issue, we should introduce other
map-$SPECIFIC options rather than re-introducing this catch-all.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Update parse_efi_param() to use parse_boolean() for "rs", so it behaves
like other Xen booleans.
However, change "attr=uc" to not be a boolean. "no-attr=uc" is ambiguous and
shouldn't be accepted, but accept "attr=no" as an acceptable alternative.
Update the command line documentation for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
GICv2 and GICv3 supports up to 1020 interrupts. However, the value computed
from GICD_TYPER.ITLinesNumber can be up to 1024. On GICv3, we will end up to
write in reserved registers that are right after the IROUTERs one as the
value is not capped early enough.
Cap the number of interrupts as soon as we compute it so we know we can
safely using it afterwards.
Signed-off-by: Julien Grall <julien.grall@arm.com>
Reported-by: Jan-Peter Larsson <Jan-Peter.Larsson@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Release-Acked-by: Juergen Gross <jgross@suse.com>
Taking decision by `need_iommu_pt_sync()` make us never kicking
`iommu_iotlb_flush()` for IOMMUs which do share P2M with CPU.
So check `has_iommu_pt()` instead.
Signed-off-by: Andrii Anisov <andrii_anisov@epam.com>
Reviewed-by: Paul Durant <paul.durrant@citrix.com>
Release-Acked-by: Juergen Gross <jgross@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Second try, this time also works for all links to xen-vbd-interface(7).
We don't try anymore to have pod2html generate relative links, instead
we do it ourself.
First, we modify all links to man pages to have what looks like an
absolute URL and pod2html will just write it in the html output.
Absolute URL in POD are in the form L<text|scheme:...> so let's just use
a scheme that isn't real, but easy to find in the resulting html output:
"relative:".
Then we fix the output and remove all the bogus scheme "relative" and
can end up with nice relative links.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Having a pvh boolean isn't ideal. If we gain a 3rd virtulsation mode,
what does `dom0=no-pvh` mean?
Change the syntax to be "dom0 = pv | pvh" which offers an option to more
obviously select PV mode. Hide both options behind the relevent
CONFIG_* settings, and default to PVH mode when CONFIG_PV is compiled
out.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Alter parse_pci_param() to use parse_boolean(), so the sub options
behave like other Xen booleans.
Update the command line documentation for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Update parse_iommu_param() to uniformly use parse_boolean(), so the sub
booleans behave like other Xen boolean options. Reposition the
custom_param() to avoid a forward declaration of parse_iommu_param().
Rewrite the command line documentation almost from scratch, including
far more detail.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Update to the latest metadata style, and discuss the options more
completely where appropriate.
Drop the redundant comment beside parse_dom0_param() - it is already out
of sync with the main documentation. Also drop the individual
documentation for deprecated options which refer to their newer
versions, for the same reason.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Block interrupts (in vmx_intr_assist()) for the duration of
processing a sync vm_event (similarly to the strategy
currently used for single-stepping). Otherwise, attempting
to emulate an instruction when requested by a vm_event
reply may legitimately need to call e.g.
hvm_inject_page_fault(), which then overwrites the active
interrupt in the VMCS.
The sync vm_event handling path on x86/VMX is (roughly):
monitor_traps() -> process vm_event -> vmx_intr_assist()
(possibly writing VM_ENTRY_INTR_INFO) ->
hvm_vm_event_do_resume() -> hvm_emulate_one_vm_event()
(possibly overwriting the VM_ENTRY_INTR_INFO value).
This patch may also be helpful for the future removal
of may_defer in hvm_set_cr{0,3,4} and hvm_set_msr().
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
CLONE_NEWIPC was introduced in Linux 2.6.19, on the 29th of November
2006, which was 12 years, 1 month, and 14 days ago.
Nevertheless apparently some people are trying to build Xen on systems
whose kernel headers are that old. Placate these people by providing
a fallback #define for CLONE_NEWIPC.
The actual binary value will of course remain constant, because of the
kernel API promise, so this is and will be correct on all platforms
where the CLONE_NEWIPC is supported. (Even if for some reason we miss
the right #includes.)
Of course at runtime this value will not work on older kernels. It
will be rejected as unknown by anything except some pre-2.6.18
kernels. On those kernels we do not want to support dm_restrict, and
an attempt to use it will fail. It is OK for the failure to be a
messy EINVAL syscall failure. (The IPC namespace unshare is necessary
to avoid a suborned deprivileged qemu from causing trouble with shm,
sem, etc.)
On the very old kernels, the feature is totally out of scope.
(We are only interested, here, in making the build work, to avoid
blocking people who aren't using this feature.)
CC: Wei Liu <wei.liu2@citrix.com>
CC: Juergen Gross <jgross@suse.com>
CC: Jan Beulich <JBeulich@suse.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This reverts commit 1bce5f9baf.
This situation should be handled by disabling the dm restrict
feature, not silently falling back to lower protection.
Also this #ifdeffery is bad style.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Users may choose to export a snapshot of OVMF and build it
with xen.git supplied ovmf-makefile. In that case we don't
need to call `git submodule`.
Fixes b16281870e.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Currently, all links to other man pages are sent to
http://man.he.net/man$mansection/$manpage, but that site doesn't have
Xen man pages, so all links to other Xen man pages are broken.
In order to fix that, this is going to be a bit complex.
First, we need to teach pod2html on where other .pod files can be found,
otherwise it isn't going make any links to our pages. This is done with
--podpath.
Second, pod2html doesn't actually understand our format
"$manpage.$mansection.pod". But instead of teaching it (which is
probably impossible) we are going to modify our .pod files in order to
tell pod2html which file to look for. This is done with the sed command
by transforming for example: "L<xl.conf(5)>" to "L<xl.conf(5)|xl.conf.5>".
Last but not least, in order to have relative links to the other
generated man page, we are going against the rules, we are going to use
"--htmlroot=." so that pod2html doesn't prepand "/" to all "relative"
links. We are also going to `cd` into the "man" dir and set podpath to
"." so that pod2html is going to generate relative links to other pod
file in the form "./$man" insteadof "man/$man" or "../$man" with other
compination of options. The result of --podpath + --podroot can be check
in pod2html's cache file "pod2html.tmp".
All of this is going to generate links in the form "./$html_manpage".
But all of this doesn't work for xen-vbd-interface(7), because it's not
a pod file... maybe we could generate pod2html's cache (pod2html.tmp)
file to add en entry.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
When the command line parsing was updated to use const strings and no longer
tokenise with NUL characters, string matches could no longer be made with
strcmp().
Unfortunately, the replacement was buggy. strncmp(s, "opt", ss - s) matches
"o", "op" and "opt" on the command line, as ss - s may be shorter than the
passed literal. Furthermore, parse_bool() is affected by this, so substrings
such as "d", "e" and "o" are considered valid, with the latter being ambiguous
between "on" and "off".
Introduce a new strcmp-like function for the task, which looks for exact
string matches, but declares success when the NUL of the literal matches a
comma, colon or semicolon in the command line fragment.
No change to the intended parsing functionality, but fixes cases where a
partial string on the command line will inadvertently trigger options.
A few areas were more than just a trivial change:
* parse_irq_vector_map_param() gained some style corrections.
* parse_vpmu_params() was rewritten to use the normal list-of-options form,
rather than just fixing up parse_vpmu_param() and leaving the parsing being
hard to follow.
* Instead of making the trivial fix of adding an explicit length check in
parse_bool(), use the length to select which token to we search for, which
is more efficient than the previous linear search over all possible tokens.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Coverity understandably complains that get_reaper_lock_and_uid leaks
the fd and hence open-file. But this is intentional: the lock becomes
owned by the child process as a whole, which is entirely the property
of libxl.
(The coding style here in this subprocess is a bit anomalous but it's
probably not worth it to convert get_reaper_lock_and_uid to `goto out'
style and have it explicitly return the fd number.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
CLONE_NEWIPC has been introduced in Linux 2.6.19 only (and into glibc
at around that time as well). Cope with it being undefined as well as
with the underlying kernel not knowing of it.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This comments that libxl__json_object_get_* and libxl__json_*_get
functions accept the libxl__json_object parameter to be NULL.
libxl__json_object_to_json also works with NULL.
This also move libxl__json_object_alloc declaration closer to similar
functions, and closer to libxl__json_object_free.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
It isn't possible to use libxl__json_object_append_to() outside of
libxl_json.c as there is no way to allocate a struct libxl__yajl_ctx.
So also remove libxl__yajl_ctx typedef from the internal header.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Now that `datalen' needs to be 1, we can remove it. Also change `data'
parameter to be a singe byte.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The re-implementation is done because we want to be able to send the
file description that QEMU can use to save its state. When QEMU is
restricted, it would not be able to write to a path.
This replace both libxl__qmp_stop() and libxl__qmp_save().
qmp_qemu_check_version() was only used by libxl__qmp_save(), so it is
replace by a version using libxl__ev_qmp instead.
Coding style fixed in libxl__domain_suspend_device_model() for the
return value.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This create an extra step for the two call sites of the function.
libxl__domain_suspend_device_model() in this patch gets an extra error
variable (there is ret and rc), but ret goes away in the next patch.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
---
libxl_domain_soft_reset() haven't been tested, as it doesn't appear to
possible to call the function from xl.
These two functions, dmss_init and dmss_dispose, need to be called to
initialise the private parts of a libxl__dm_spawn_state (dmss) as well
as dispose of them before giving back control to a caller.
There are 3 functions that can start using a dmss, the classic
libxl__spawn_local_dm, the one for stubdom libxl__spawn_stub_dm and
libxl__spawn_qdisk_backend. But there are only 2 exit path as
libxl__spawn_qdisk_backend is using libxl__spawn_local_dm functions.
These two new functions are empty but will be used shortly.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch moves the creation of the QMP unix socket from QEMU to libxl.
But libxl doesn't rely on this yet.
When starting QEMU with dm_restrict=1, pre-open the QMP socket before
exec QEMU. That socket will be useful to find out if QEMU is ready, and
pre-opening it means that libxl can connect to it without waiting for
QEMU to create it.
The pre-opening is conditional, based on the use of dm_restrict
because it is using a new command line option of QEMU, and dm_restrict
support in QEMU is newer.
-chardev socket,fd=X is available with QEMU 2.12, since commit:
> char: allow passing pre-opened socket file descriptor at startup
> 0935700f8544033ebbd41e1f13cd528f8a58d24d
dm_restrict is available in QEMU 3.0.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These two new functions libxl__domain_build_state_{init,dispose} should
be called every time a new libxl__domain_build_state comes to existance.
There seems to be two of them, one with the domain creation machinery,
and one in the stub_dm_spawn.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This function can be used by user of libxl__spawn_* when they setup a
notification other than xenstore. The parent can already report success
via libxl__spawn_initiate_detach(), this new function can be used for
failure instead of waiting for the timeout.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch implement the API libxl__ev_qmp documented in the previous
patch, "libxl: Design of an async API to issue QMP commands to QEMU".
Since this API is to interact with QEMU via the QMP protocol, it also
implement a QMP client. The specification for the QEMU Machine Protocol
(QMP) can be found in the QEMU repository at:
https://git.qemu.org/?p=qemu.git;a=blob_plain;f=docs/interop/qmp-spec.txt
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ wei: fix build ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
All the functions will be implemented in later patches.
This patch includes the API that libxl can use to send QMP commands to
QEMU.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ wei: fix build ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
That wrapper is going to be used to safely log a json_object, as
libxl__json_object_to_json return NULL on error. In the error case,
JSON() will return an invalid json string.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch makes the function simpler to read. It also add the ability
for a caller to tell if QEMU is newer or have the exact version.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
.. to be able to re-use qmp_prepare_cmd with libxl__ev_qmp.
This patch also add the QMP end of command '\r\n' into the generated
string as every caller will needs this.
There should be no functional change.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch change the behavior of libxl__sendmsg_fds to retry sendmsg on
EINTR error and return an error on short writes.
This patch allow a caller of libxl__sendmsg_fds to deal with EWOULDBLOCK
and short writes. The function now requires to send only 1 byte of data
so that when dealing with non-blocking fds a EWOULDBLOCK error would
mean that the fds haven't been sent yet. Current caller already send
only 1 byte.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[ wei: fix build ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
As a short term alternative to deleting the code, default its building
to off (overridable in EXPERT mode only). Additionally make sure other
related baggage (LZO code) won't be carried when the option is off (with
TMEM scheduled to be deleted anyway, I didn't want to introduce a
separate Kconfig option to control the LZO compression code, and hence
CONFIG_TMEM is used directly there). Similarly I couldn't be bothered to
add actual content to the command line option doc for the two affected
options.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
finish_type_change() returns a negative int on error, but the
current code checks if ( !rc ). We also need to treat
finish_type_change()'s return codes cumulatively in the
success case (don't overwrite a 1 returned while processing
the hostp2m if processing an altp2m returns 0).
The breakage was introduced by commit 0fb4b58c8b
("x86/altp2m: fix display frozen when switching to a new view
early").
Properly indent the out: label while at it.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
With being the default scheduler now the comment in sched_credit2
stating it being experimental should be removed.
While at it remove the "TODO" comments already addressed.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Dario Faggioli <dfaggioli@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
Currently dma_bitsize is zero by default on single NUMA node machines.
This makes all alloc_domheap_pages() calls with MEMF_no_dma return NULL.
There is only 1 user of MEMF_no_dma: dom0_memflags, which are used
during memory allocation for Dom0. Failing allocation with default
dom0_memflags is especially severe for the PV Dom0 case: it makes
alloc_chunk() to use suboptimal 2MB allocation algorithm with a search
for higher memory addresses.
This can lead to the NMI watchdog timeout during PV Dom0 construction
on some machines, which can be worked around by specifying "dma_bits"
in Xen's cmdline manually.
Fix the issue by ignoring MEMF_no_dma in cases when dma_bitsize is zero,
which means there is no DMA zone. This shouldn't cause any issues for
Dom0 because alloc_heap_pages() will first use higher memory addresses
for satisfying memory allocation requests.
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
OVMF has become dependent on OpenSSL, which is included as a
submodule. Initialise submodules before building.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Fix device assignment on ARM after 91d4eca7 "mm / iommu: split
need_iommu() into has_iommu_pt() and need_iommu_pt_sync()".
arch_iommu_populate_page_table returns -ENOSYS which causes
iommu_construct to return early, although it is not an error.
hd->status needs to be set to IOMMU_STATUS_initializing before calling
iommu_use_hap_pt, otherwise iommu_use_hap_pt will return the wrong
value.
Signed-off-by: Stefano Stabellini <stefanos@xilinx.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add a verbose option to the dom0 command line, so that dom0 builder
can print extra debug information when required.
Use this new verbose mode to print statistics about memory allocations
when populating dom0 p2m.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Andrew Cooper
Julien Grall
Andrii Anisov
Anthony PERARD
Roger Pau Monné
Razvan Cojocaru
Wei Liu
Ian Jackson
Jan Beulich
Anthony PERARD
Juergen Gross
Sergey Dyasli
Stefano Stabellini