The current version of the powernow driver uses the APERF/MPEF
and the HWCR MSRs. Add cases in traps.c to let dom0 access
those MSRs.
Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Change the meaning of credit1's "weight" parameter to be per-vcpu,
rather than per-VM.
At the moment, the "weight" parameter for a VM is set on a per-VM
basis. This means that when cpu time is scarce, two VMs with the same
weight will be given the same amount of total cpu time, no matter how
many vcpus it has. I.e., if a VM has 1 vcpu, that vcpu will get x% of
cpu time; if a VM has 2 vcpus, each vcpu will get (x/2)% of the cpu
time.
I believe this is a counter-intuitive interface. Users often choose
to add vcpus; when they do so, it's with the expectation that a VM
will need and use more cpu time. In my experience, however, users
rarely change the weight parameter. So the normal course of events is
for a user to decide a VM needs more processing power, add more cpus,
but doesn't change the weight. The VM still gets the same amount of
cpu time, but less efficiently allocated (because it's divided).
The attached patch changes the meaning of the "weight" parameter, to
be per-vcpu. Each vcpu is given the weight. So if you add an extra
vcpu, your VM will get more cpu time as well.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
When __pci_enable_msix() returns early, output parameter (struct
msi_desc **desc) will not be initialized. On my machine, a Broadcom
BCM5709 nic has both MSI and MSIX capability blocks and when guest
tries to enable msix interrupts but __pci_enable_msix() returns early
for encountering a msi block, the whole system will crash for fatal
page fault immediately.
Signed-off-by: Wei Wang <wei.wang2@amd.com>
This is an attempt to impose some sensible coherent ordering on the
cpu namespace, where previously there was none (we were at the mercy
of BIOS ordering, which varies wildly across systems).
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Implement PCI pass-through for multi-function devices. The supported BDF
notation is: BB:DD.* - therefore passing-through a subset of functions or
remapping the function numbers is not supported except for when passing
through a single function which will be a virtual function 0.
Letting qemu automatically select the virtual slot is not supported in
multi-function passthrough since the qemu-dm protocol can not actually
handle that case.
Also fix format error in xl pci-list-assignable.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Allow specification of backend domains for vifs, either in the config
file or via network-attach.
Signed-off-by: Mihir Nanavati <mihirn@cs.ubc.ca>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
If libelf calls elf_err() or elf_msg() before elf_set_log() has been
called then it could potentially read an uninitialised log handling
callback function pointer from struct elf_binary. Fix this in libxc by
zeroing the structure before calling elf_init().
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The error message when one wants to list a non-existent domain is at
best misleading (libxl_domain_info failed (code -5)).
This patch catches this specific error and tells the user that the
requested domain does not exist:
Error: Domain '42' does not exist.
Signed-off-by: Andre Przywara <andre.przywara@amd.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Change p2m infrastructure to operate on per-p2m instead of per-domain.
This allows us to use multiple p2m tables per-domain.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Tim Deegan <Tim.Deegan@citrix.com>
Currently, there has a logic to check whether the EPT GFN is exceeding
guest physical address width. It uses right shift(>>) to implement the
check. But the right shift count is greater than the width of the
type(unsigned long = 32) under the PAE. And this will cause guest boot
fail under PAE with EPT supported.
Signed-off-by: Li Xin <xin.li@intel.com>
Signed-off-by: Zhang Yang <yang.z.zhang@intel.com>
Corrects an error introduced with cs 21422.
Without the patch my machine crashed when removing a cpu from a
cpupool other than Pool-0.
Signed-off-by: Juergen Gross <juergen.gross@ts.fujitsu.com>
VMs that don't use their full timeslice are guaranteed to flip back
and forth between "active" and "inactive". If we set credit to 0
when setting "inactive", then when the VM comes back to "active"
again, it will effectively be behind most other vcpus in credit.
This causes the credit1 to effectively discriminate *against*
VMs which use less than their full timeslice.
Instead of setting credit to 0, divide it in half. This gets rid of
some of the system credit while allowing non-cpu-bound VMs to keep
some priority advantage.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
This patch implements 'yield' for credit1. It does this by attempting
to put yielding vcpu behind a single lower-priority vcpu on the
runqueue. If no lower-priority vcpus are in the queue, it will go at
the back (which if the queue is empty, will also be the front).
Runqueues are sorted every 30ms, so that's the longest this priority
inversion can happen.
For workloads with heavy concurrency hazard, and guest which implement
yield-on-spinlock, this patch significantly increases performance and
total system throughput.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
From: Anthony PERARD <anthony.perard@citrix.com>
This patch adds a second argument to vif-bridge script. It can be "vif"
or "tap". "vif" give the default behavior and "tap" just add the
interface to the found bridge when the action is "add".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
tools/hotplug/Linux/vif-bridge | 20 ++++++---
tools/hotplug/Linux/vif-common.sh | 70 ++++++++++++++++++++++++---------
tools/hotplug/Linux/xen-backend.rules | 5 +-
tools/libxl/libxl.c | 6 +-
4 files changed, 70 insertions(+), 31 deletions(-)
From: Anthony PERARD <anthony.perard@citrix.com>
This patch adds a function to check the version of the device model.
Depending on the version of the DM, the command line arguments will be
built differently.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
tools/libxl/libxl.c | 160 ++++++++++++++++++++++++++++++++++++++++++++-
tools/libxl/libxl_utils.c | 78 ++++++++++++++++++++++
tools/libxl/libxl_utils.h | 6 ++
3 files changed, 243 insertions(+), 1 deletions(-)
From: Anthony PERARD <anthony.perard@citrix.com>
Currently, tap device names for a domain begin at tap42.-1, but it must
be tap42.0.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
---
tools/libxl/libxl.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
When ioapic_rte_to_remap_entry fails, currently it just writes value
to ioapic. But the 'mask' bit may be changed if it writes to the upper
half of RTE. This patch ensures to recover the original value of 'mask'
bit in this case.
Signed-off-by: Weidong Han <weidong.han@intel.com>
At the end of io_apic_write_remap_rte, it writes new entry (remapped
interrupt) to ioapic. But it writes low 32 bits before high 32 bits,
it unmasks interrupt before writing high 32 bits if 'mask' bit in low
32 bits is cleared. Thus it may result in issues. This patch fixes
this issue by writing high 32 bits before low 32 bits.
Signed-off-by: Jiang, Yunhong <yunhong.jiang@intel.com>
Signed-off-by: Weidong Han <weidong.han@intel.com>
Extended PCI configuration space is not accessible on 32 bit
systems. This patch disables IBS feature on 32 bit to avoid
IBSCTL(0x1cc) accesses.
Signed-off-by: Wei Wang <wei.wang2@amd.com>
Creates a shared memory ring buffer and event channel in HVM domains
for passing debug messages from PV drivers on HVM guests
The console is used by windows pv drivers to send debug data to xenconsoled
Signed-off-by: Owen Smith <owen.smith@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Fixes these valgrind reported leaks, found with "valgrind xl create -n ..."
==21170== 8 bytes in 3 blocks are definitely lost in loss record 1 of 3
==21170== at 0x4022F0A: malloc (vg_replace_malloc.c:236)
==21170== by 0x411B22F: strdup (in /lib/i686/cmov/libc-2.7.so)
==21170== by 0x4030085: xlu__cfgl_strdup (libxlu_cfg.c:290)
==21170== by 0x402F3C4: xlu__cfg_yylex (libxlu_cfg_l.l:37)
==21170== by 0x402DD86: xlu__cfg_yyparse (libxlu_cfg_y.c:1338)
==21170== by 0x40308AE: xlu_cfg_readdata (libxlu_cfg.c:85)
==21170== by 0x804DBE4: parse_config_data (xl_cmdimpl.c:591)
==21170== by 0x8056EE4: create_domain (xl_cmdimpl.c:1381)
==21170== by 0x80582AE: main_create (xl_cmdimpl.c:3178)
==21170== by 0x804B54B: main (xl.c:76)
==21170==
==21170== 57 bytes in 2 blocks are definitely lost in loss record 2 of 3
==21170== at 0x4022F0A: malloc (vg_replace_malloc.c:236)
==21170== by 0x402FE22: xlu__cfgl_dequote (libxlu_cfg.c:307)
==21170== by 0x402F4B4: xlu__cfg_yylex (libxlu_cfg_l.l:52)
==21170== by 0x402DD86: xlu__cfg_yyparse (libxlu_cfg_y.c:1338)
==21170== by 0x40308AE: xlu_cfg_readdata (libxlu_cfg.c:85)
==21170== by 0x804DBE4: parse_config_data (xl_cmdimpl.c:591)
==21170== by 0x8056EE4: create_domain (xl_cmdimpl.c:1381)
==21170== by 0x80582AE: main_create (xl_cmdimpl.c:3178)
==21170== by 0x804B54B: main (xl.c:76)
==21170==
==21170== 111 bytes in 6 blocks are definitely lost in loss record 3 of 3
==21170== at 0x4022F0A: malloc (vg_replace_malloc.c:236)
==21170== by 0x402FE22: xlu__cfgl_dequote (libxlu_cfg.c:307)
==21170== by 0x402F4ED: xlu__cfg_yylex (libxlu_cfg_l.l:56)
==21170== by 0x402DD86: xlu__cfg_yyparse (libxlu_cfg_y.c:1338)
==21170== by 0x40308AE: xlu_cfg_readdata (libxlu_cfg.c:85)
==21170== by 0x804DBE4: parse_config_data (xl_cmdimpl.c:591)
==21170== by 0x8056EE4: create_domain (xl_cmdimpl.c:1381)
==21170== by 0x80582AE: main_create (xl_cmdimpl.c:3178)
==21170== by 0x804B54B: main (xl.c:76)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
1. Try to allocate from nodes containing CPUs which a guest can be
scheduled on.
2. Remember which node we allocated from last, and round-robin
allocations among above-mentioned nodes.
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
NOTE: This functionality depends on a corresponding qemu-dm patch to work as
expected. Should be safe to use with an un-patched qemu-dm as before.
libxl_wait_for_device_model can only wait for one status value, re-work the
API so that a callback function can chose between several different possible
status values for qemu-dm and fix up all callers appropriately.
In the case of PCI device insert we succeed if qemu-dm reports
"pci-device-inserted" and error out instead of hanging forever if it fails
since qemu-dm now reports a status of "pci-insert-failed".
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Move to state-machine parser for PCI BDF's now that the number of possible
sscanf expressions is sufficiently large to make it worth it. Also implement
parsing of virtual PCI slot numbers.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Introduce a new libxl call libxl_device_pci_parse_bdf() and use it
consistently.
This patch also fixes an infinite loop bug in xl create. If there is a
parse-error on any pci config file entry then xl will attempt to skip it, but
since num_pcidevs is used to index the config list and is not incremented when
skipping, this caused an infinite loop. Solve that problem by introducing a new
loop counter variable.
Note that virtual PCI slots are not parsed by the new code. However this is
a step towards support for virtual slots and multi-function device assignment
since only one location in the code will need to be changed now.
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Get rid of scan_sys_pcidir() and open-code it inside
libxl_device_pci_list_assignable() since it's not a generically re-useable
function and we're not supporting pcistub driver now. Also use macros for sysfs
dirs in libxl_device_pci_reset
Signed-off-by: Gianni Tedesco <gianni.tedesco@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Found using "valgrind xl create -n ..." and "valgrind xl create -e ..."
freeing config_data solves:
==18276== 944 bytes in 1 blocks are definitely lost in loss record 12 of 12
==18276== at 0x4022F0A: malloc (vg_replace_malloc.c:236)
==18276== by 0x404AEC1: libxl_read_file_contents (libxl_utils.c:258)
==18276== by 0x8056865: create_domain (xl_cmdimpl.c:1314)
==18276== by 0x8057E2D: main_create (xl_cmdimpl.c:3135)
==18276== by 0x804B2FB: main (xl.c:76)
==18276==
Adding free_domain_config() solves the following (plus presumably others
which didn't trigger because I have no devices of that type).
d_config->disks:
==18276== 61 (32 direct, 29 indirect) bytes in 1 blocks are definitely lost in loss record 9 of 12
==18276== at 0x4022F0A: malloc (vg_replace_malloc.c:236)
==18276== by 0x4022F94: realloc (vg_replace_malloc.c:525)
==18276== by 0x804E2D3: parse_config_data (xl_cmdimpl.c:715)
==18276== by 0x8056A7C: create_domain (xl_cmdimpl.c:1347)
==18276== by 0x8057E2D: main_create (xl_cmdimpl.c:3135)
==18276== by 0x804B2FB: main (xl.c:76)
d_config->vifs:
==18276== 76 (48 direct, 28 indirect) bytes in 1 blocks are definitely lost in loss record 10 of 12
==18276== at 0x4022F0A: malloc (vg_replace_malloc.c:236)
==18276== by 0x4022F94: realloc (vg_replace_malloc.c:525)
==18276== by 0x804E665: parse_config_data (xl_cmdimpl.c:779)
==18276== by 0x8056A7C: create_domain (xl_cmdimpl.c:1347)
==18276== by 0x8057E2D: main_create (xl_cmdimpl.c:3135)
==18276== by 0x804B2FB: main (xl.c:76)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Found with "valgrind xl destroy ...":
==16272== 53,248 bytes in 1 blocks are definitely lost in loss record 6 of 6
==16272== at 0x4022249: calloc (vg_replace_malloc.c:467)
==16272== by 0x403FD4A: libxl_list_domain (libxl.c:490)
==16272== by 0x404B901: libxl_name_to_domid (libxl_utils.c:65)
==16272== by 0x804B4D2: domain_qualifier_to_domid (xl_cmdimpl.c:181)
==16272== by 0x804B50F: find_domain (xl_cmdimpl.c:198)
==16272== by 0x804D70C: destroy_domain (xl_cmdimpl.c:2104)
==16272== by 0x8054E4C: main_destroy (xl_cmdimpl.c:2912)
==16272== by 0x804B2FB: main (xl.c:76)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Keir Fraser
Stefano Stabellini
Gianni Tedesco
Anthony Perard
Juergen Gross
Ian Campbell
Ian Campbell