alternatives is used both at boot time, and when loading livepatch payloads.
While for the former it makes sense to panic, it's not useful for the later, as
for livepatches it's possible to fail to load the livepatch if alternatives
cannot be resolved and continue operating normally.
Relax the BUGs in _apply_alternatives() to instead return an error code. The
caller will figure out whether the failures are fatal and panic.
Print an error message to provide some user-readable information about what
went wrong.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: aa5a06d5d6
master date: 2024-09-26 14:18:03 +0100
The check against the expected Xen build ID should be done ahead of attempting
to apply the alternatives contained in the livepatch.
If the CPUID in the alternatives patching data is out of the scope of the
running Xen featureset the BUG() in _apply_alternatives() will trigger thus
bringing the system down. Note the layout of struct alt_instr could also
change between versions. It's also possible for struct exception_table_entry
to have changed format, hence leading to other kind of errors if parsing of the
payload is done ahead of checking if the Xen build-id matches.
Move the Xen build ID check as early as possible. To do so introduce a new
check_xen_buildid() function that parses and checks the Xen build-id before
moving the payload. Since the expected Xen build-id is used early to
detect whether the livepatch payload could be loaded, there's no reason to
store it in the payload struct, as a non-matching Xen build-id won't get the
payload populated in the first place.
Note printing the expected Xen build ID has part of dumping the payload
information is no longer done: all loaded payloads would have Xen build IDs
matching the running Xen, otherwise they would have failed to load.
Fixes: 879615f5db ('livepatch: Always check hypervisor build ID upon livepatch upload')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: fa49f4be41
master date: 2024-09-26 14:18:03 +0100
The following sections: .note.gnu.build-id, .livepatch.xen_depends and
.livepatch.depends are mandatory and ensured to be present by
check_special_sections() before prepare_payload() is called.
Simplify the logic in prepare_payload() by introducing a generic function to
parse the sections that contain a buildid. Note the function assumes the
buildid related section to always be present.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 86d09d16dd
master date: 2024-09-26 14:18:03 +0100
The Elf loading logic will initially use the `data` section field to stash a
pointer to the temporary loaded data (from the buffer allocated in
livepatch_upload(), which is later relocated and the new pointer stashed in
`load_addr`.
Remove this dual field usage and use an `addr` uniformly. Initially data will
point to the temporary buffer, until relocation happens, at which point the
pointer will be updated to the relocated address.
This avoids leaving a dangling pointer in the `data` field once the temporary
buffer is freed by livepatch_upload().
Note the `addr` field cannot retain the const attribute from the previous
`data`field, as there's logic that performs manipulations against the loaded
sections, like applying relocations or sorting the exception table.
No functional change intended.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Michal Orzel <michal.orzel@amd.com>
master commit: 8c81423038
master date: 2024-09-26 14:18:03 +0100
Right now, Xen clobbers the value at 0xffc when performing it's load-base
calculation. We've got plenty of free registers at this point, so the value
can be preserved easily.
This fixes a real bug booting under Coreboot+SeaBIOS, where 0xffc happens to
be the cbmem pointer (e.g. Coreboot's dmesg ring, among other things).
However, there's also a better choice of memory location to use than 0xffc, as
all our supported boot protocols have a pointer to an info structure in %ebx.
Update the documentation to match.
Fixes: 1695e53851 ("x86/boot: Fix the boot time relocation calculations")
Fixes: d96bb172e8 ("x86/entry: Early PVH boot code")
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: e58a2858d5
master date: 2024-08-27 18:08:19 +0100
Xen 4.1 is more than a decade stale now. Use the same mechanism as elsewhere
in the tree to get the current version number.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Edwin Török <edwin.torok@cloud.com>
master commit: 1965e9a930
master date: 2024-08-23 15:02:27 +0100
These days, `ocamlopt -h` asks you whether you meant --help instead, meaning
that the $(shell ) invocation here isn't going end up containing '-g'.
Make it unconditional, like it is in OCAMLCFLAGS already.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Christian Lindig <christian.lindig@cloud.com>
Reviewed-by: Edwin Török <edwin.torok@cloud.com>
master commit: 126293eae6
master date: 2024-08-23 15:02:27 +0100
The current logic to chose the preferred reboot method is based on the mode Xen
has been booted into, so if the box is booted from UEFI, the preferred reboot
method will be to use the ResetSystem() run time service call.
However, that method seems to be widely untested, and quite often leads to a
result similar to:
Hardware Dom0 shutdown: rebooting machine
----[ Xen-4.18-unstable x86_64 debug=y Tainted: C ]----
CPU: 0
RIP: e008:[<0000000000000017>] 0000000000000017
RFLAGS: 0000000000010202 CONTEXT: hypervisor
[...]
Xen call trace:
[<0000000000000017>] R 0000000000000017
[<ffff83207eff7b50>] S ffff83207eff7b50
[<ffff82d0403525aa>] F machine_restart+0x1da/0x261
[<ffff82d04035263c>] F apic_wait_icr_idle+0/0x37
[<ffff82d040233689>] F smp_call_function_interrupt+0xc7/0xcb
[<ffff82d040352f05>] F call_function_interrupt+0x20/0x34
[<ffff82d04033b0d5>] F do_IRQ+0x150/0x6f3
[<ffff82d0402018c2>] F common_interrupt+0x132/0x140
[<ffff82d040283d33>] F arch/x86/acpi/cpu_idle.c#acpi_idle_do_entry+0x113/0x129
[<ffff82d04028436c>] F arch/x86/acpi/cpu_idle.c#acpi_processor_idle+0x3eb/0x5f7
[<ffff82d04032a549>] F arch/x86/domain.c#idle_loop+0xec/0xee
****************************************
Panic on CPU 0:
FATAL TRAP: vector = 6 (invalid opcode)
****************************************
Which in most cases does lead to a reboot, however that's unreliable.
Change the default reboot preference to prefer ACPI over UEFI if available and
not in reduced hardware mode.
This is in line to what Linux does, so it's unlikely to cause issues on current
and future hardware, since there's a much higher chance of vendors testing
hardware with Linux rather than Xen.
Add a special case for one Acer model that does require being rebooted using
ResetSystem(). See Linux commit 0082517fa4bce for rationale.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
# Commit 44a37c7832
# Date 2024-08-06 08:37:10 +0200
# Author Jan Beulich <jbeulich@suse.com>
# Committer Jan Beulich <jbeulich@suse.com>
x86/shutdown: use DMI_MATCH2()
... to please Misra C:2012 Rule 9.3 (Arrays shall not be partially
initialized).
Fixes: d81dd31303 ("x86/shutdown: change default reboot method preference")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
master commit: d81dd31303
master date: 2024-08-05 10:16:54 +0200
master commit: 44a37c7832
master date: 2024-08-06 08:37:10 +0200
It's sadically misleading to show an error without letters and expect
the dmesg reader to understand it's in hex. The patch adds a 0x prefix
to all hex numbers that don't already have it.
On the one instance in which a boolean is printed as an integer, print
it as a decimal integer instead so it's 0/1 in the common case and not
misleading if it's ever not just that due to a bug.
While at it, rename VIRIDIAN CRASH to VIRIDIAN GUEST_CRASH. Every member
of a support team that looks at the message systematically believes
"viridian" crashed, which is absolutely not what goes on. It's the guest
asking the hypervisor for a sudden shutdown because it crashed, and
stating why.
Signed-off-by: Alejandro Vallejo <alejandro.vallejo@cloud.com>
Reviewed-by: Paul Durrant <paul@xen.org>
master commit: ba709d514a
master date: 2024-07-30 11:51:23 +0200
It's very rude for a library to play with signals behind the back of the
application, no matter ones views on the default behaviour of SIGPIPE under
POSIX. Even if the application doesn't care about the xenstored socket, it my
care about others.
This logic has existed since xenstore/xenstored was originally added in commit
29c9e570b1 ("Add xenstore daemon and library") in 2005.
It's also unnecessary. Pass MSG_NOSIGNAL when talking to xenstored over a
pipe (to avoid sucumbing to SIGPIPE if xenstored has crashed), and forgo any
playing with the signal disposition.
This has a side benefit of saving 2 syscalls per xenstore request.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: a17b6db9b0
master date: 2024-07-23 15:11:27 +0100
With the input data now conveniently arranged, use writev()/sendmsg() instead
of decomposing it into write() calls.
This causes all requests to be submitted with a single system call, rather
than at least two. While in principle short writes can occur, the chances of
it happening are slim given that most xenbus comms are only a handful of
bytes.
Nevertheless, provide {writev,sendmsg}_exact() wrappers which take care of
resubmitting on EINTR or short write.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: ebaeb0c64a
master date: 2024-07-23 15:11:27 +0100
We would like to writev() the whole outgoing message, but this is hard given
the current need to prepend the locally-constructed xsd_sockmsg.
Instead, have the caller provide xsd_sockmsg in iovec[0]. This in turn drops
the 't' and 'type' parameters from xs_talkv().
Note that xs_talkv() may alter the iovec structure. This may happen when
writev() is really used under the covers, and it's preferable to having the
lower levels need to duplicate the iovec to edit it upon encountering a short
write. xs_directory_part() is the only function impacted by this, and it's
easy to rearrange to be compatible.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: e2a93bed8b
master date: 2024-07-23 15:11:27 +0100
If the sum of iov element lengths overflows, the XENSTORE_PAYLOAD_MAX can
pass, after which we'll write 4G of data with a good-looking length field, and
the remainder of the payload will be interpreted as subsequent commands.
Check each iov element length for XENSTORE_PAYLOAD_MAX before accmulating it.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
master commit: 42db2deb5e
master date: 2024-07-23 15:11:27 +0100
xen-hvmcrash would previously save records, overwrite the instruction
pointer with a bogus value, and then restore them to crash a domain
just enough to cause the guest OS to memdump.
This approach is found to be unreliable when tested on a guest running
Windows 10 x64, with some executions doing nothing at all.
Another approach would be to trigger NMIs. This approach is found to be
unreliable when tested on Linux (Ubuntu 22.04), as Linux will ignore
NMIs if it is not configured to handle such.
Injecting a double fault abort to all vCPUs is found to be more
reliable at crashing and invoking memdumps from Windows and Linux
domains.
This patch modifies the xen-hvmcrash tool to inject #DF to all vCPUs
belonging to the specified domain, instead of overwriting RIP.
Signed-off-by: Matthew Barnes <matthew.barnes@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: e42e4d8c3e
master date: 2024-07-22 10:50:03 +0100
For SErrors, we support two configurations:
* Every SErrors will result to a panic in Xen
* We will forward SErrors triggered by a VM back to itself
For the latter case, we want to skip the call to do_trap_*() because the PC
was already adjusted.
However, the alternative used to decide between the two configurations
is inverted. This would result to the VM corrupting itself if:
* x19 is non-zero in the panic case
* advance PC too much in the second case
Solve the issue by switch from alternative_if to alternative_if_not.
Fixes: a458d3bd0d ("xen/arm: entry: Ensure the guest state is synced when receiving a vSError")
Signed-off-by: Julien Grall <jgrall@amazon.com>
(cherry picked from commit 35c64c3dce)
GNU assembly that supports such feature will unconditionally add a
.note.gnu.property section to object files. The content of that section can
change depending on the generated instructions. The current logic in
livepatch-build-tools doesn't know how to deal with such section changing
as a result of applying a patch and rebuilding.
Since .note.gnu.property is not consumed by the Xen build, suppress its
addition when livepatch support is enabled.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 718400a54d
master date: 2024-11-11 13:19:45 +0100
Clang 19 complains with the following error when building libxl:
libxl_utils.c:48:15: error: variable length array folded to constant array as an extension [-Werror,-Wgnu-folding-constant]
48 | char path[strlen("/local/domain") + 12];
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
Replace the usage of strlen() with sizeof, which allows the literal
string length to be known at build time. Note sizeof accounts for the
NUL terminator while strlen() didn't, hence subtract 1 from the total
size calculation.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: a7c7c3f642
master date: 2024-11-05 19:59:50 +0000
When using AMD-Vi interrupt remapping the vector field in the IO-APIC RTE is
repurposed to contain part of the offset into the remapping table. Previous to
2ca9fbd739 Xen had logic so that the offset into the interrupt remapping
table would match the vector. Such logic was mandatory for end of interrupt to
work, since the vector field (even when not containing a vector) is used by the
IO-APIC to find for which pin the EOI must be performed.
A simple solution wold be to read the IO-APIC RTE each time an EOI is to be
performed, so the raw value of the vector field can be obtained. However
that's likely to perform poorly. Instead introduce a cache to store the
EOI handles when using interrupt remapping, so that the IO-APIC driver can
translate pins into EOI handles without having to read the IO-APIC RTE entry.
Note that to simplify the logic such cache is used unconditionally when
interrupt remapping is enabled, even if strictly it would only be required
for AMD-Vi.
Reported-by: Willi Junga <xenproject@ymy.be>
Suggested-by: David Woodhouse <dwmw@amazon.co.uk>
Fixes: 2ca9fbd739 ('AMD IOMMU: allocate IRTE entries instead of using a static mapping')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 86001b3970
master date: 2024-11-05 10:36:53 +0000
xl/libxl memory is leaking into a PVH guest through uninitialized
portions of the ACPI tables.
Use libxl_zalloc() to obtain zero-ed memory to avoid this issue.
This is XSA-464 / CVE-2024-45819.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Fixes: 14c0d328da ("libxl/acpi: Build ACPI tables for HVMlite guests")
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 0bfe567b58
master date: 2024-11-12 13:32:45 +0100
No state is left to protect. It being the last field, drop the struct
itself as well. Similarly for then ending up empty, drop the .complete
handler.
This is part of XSA-463 / CVE-2024-45818
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit b180a50326)
No uses are left, hence its setup, teardown, and the field itself can
also go away. stdvga_deinit() is then empty and can be dropped as well.
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 3beb4baf2a)
No consumers are left, hence the producer and the fields themselves can
also go away. stdvga_outb() is then useless, rendering stdvga_out()
useless as well. Hence the entire I/O port intercept can go away.
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 86c03372e1)
No consumers are left, hence the producer and the array itself can also
go away. The static sr_mask[] is then orphaned and hence needs dropping,
too.
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 7aba44bdd7)
No consumers are left, hence the producer and the array itself can also
go away. The static gr_mask[] is then orphaned and hence needs dropping,
too.
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit b16c0966a1)
All read accesses are rejected by the ->accept handler, while writes
bypass the bulk of the function body. Drop the dead code, leaving an
assertion in the read handler.
A number of other static items (and a macro) are then unreferenced and
hence also need (want) dropping. The same applies to the "latch" field
of the state structure.
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 89108547af)
Two of its consumers are dead (in compile-time constant conditionals)
and the only remaining ones are merely controlling debug logging. Hence
the field is now pointless to set, which in particular allows to get rid
of the questionable conditional from which the field's value was
established (afaict 551ceee975 ["x86, hvm: stdvga cache always on"]
had dropped too much of the earlier extra check that was there, and
quite likely further checks were missing).
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit b740a9369e)
Since 68e1183411 ("libxc: introduce a xc_dom_arch for hvm-3.0-x86_32
guests"), HVM guests are built using XEN_DOMCTL_sethvmcontext, which
ends up disabling stdvga caching because of arch_hvm_load() being
involved in the processing of the request. With that the field is
useless, and can be dropped. Drop the helper functions manipulating /
checking as well right away, but leave the use sites of
stdvga_cache_is_enabled() with the hard-coded result the function would
have produced, to aid validation of subsequent dropping of further code.
This is part of XSA-463 / CVE-2024-45818
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 53b7246bdf)
Rework the container to be non-root, use heredocs for readability, and
use apt-get --no-install-recommends to keep the size down. Rename the
job to x86_32, to be consistent with XEN_TARGET_ARCH and the
naming scheme of all the other CI jobs:
${VERSION}-${ARCH}-${BUILD_NAME}
Remove build dependencies for building QEMU. The absence of ninja/meson means
that the container hasn't been able to build QEMU in years.
Remove build dependencies for the documentation as we don't have to
build it for every single arch.
This reduces the size of the container from 2.22GB to 1.32Gb.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 1ceabff115)
Rework the container to use heredocs for readability, and use
apt-get --no-install-recommends to keep the size down.
This reduces the size of the (uncompressed) container from 3.44GB to
1.97GB.
The container is left running the builds and tests as root. A
subsequent patch will make the necessary changes to the test scripts
to allow test execution as a non-root user.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 44b742de09)
Right now, various blocks rewrite domU_config= as a whole, even though it is
largely the same.
* dom0pvh-hvm does nothing but change the domain type to hvm
* *-pci sets the domain type, clears vif=[], appends earlyprintk=xen to the
cmdline, and adds some PCI config.
Refactor this to be domU_type (defaults to pvh), domU_vif (defaults to
xenbr0), and domU_extra_config (defaults to empty) and use these variables to
build domU_config= once.
Of note, the default domU_config= now sets cmdline=, and extra= is intended
for inclusion via domU_extra_config as necessary.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
(cherry picked from commit 3be3ae0770)
* List all the test_variants and summerise what's going on
* Use case rather than an if/else chain for $test_variant
* Adjust indentation inside the case block
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
(cherry picked from commit 6685a129c7)
We spend an awful lot of CI time building QEMU, even though most changes don't
touch the subset of tools/libs/ used by QEMU. Some numbers taken at a time
when CI was otherwise quiet:
With Without
Alpine: 13m38s 6m04s
Debian 12: 10m05s 8m10s
OpenSUSE Tumbleweed: 11m40s 7m54s
Ubuntu 24.04: 14m56s 8m06s
which is a >50% improvement in wallclock time in some cases.
The only build we have that needs QEMU is alpine-3.18-gcc-debug. This is the
build deployed and used by the QubesOS ADL-* and Zen3p-* jobs.
Xilinx-x86_64 deploys it too, but is PVH-only and doesn't use QEMU.
QEMU is also built by CirrusCI for FreeBSD (fully Clang/LLVM toolchain).
This should help quite a lot with Gitlab CI capacity.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit e305256e69)
The smoke tests when successful complete in about 5s. Don't waste
20min+ on failure, shorten the timeout to 120s
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit bcce5a6b62)
Check if xen.efi is bootable with an XTF dom0.
The multiboot2+EFI path is tested on hardware tests already.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
(cherry picked from commit 2d1c673bae)
TEST_TIMEOUT is set as a CI/CD project variable, as it should be, to
match the capability and speed of the testing infrastructure.
As it turns out, TEST_TIMEOUT defined in test.yaml cannot override
TEST_TIMEOUT defined as CI/CD project variable. As a consequence, today
the TEST_TIMEOUT setting in test.yaml for the Xilinx jobs is ignored.
Instead, rename TEST_TIMEOUT to TEST_TIMEOUT_OVERRIDE in test.yaml and
check for TEST_TIMEOUT_OVERRIDE first in console.exp.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
(cherry picked from commit d82e0e094e)
The test showed unreliable behavior due to unsupported console settings.
Update the baud rate used to connect to the UART.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit c23571fe31)
Fixes: 95764a0817 (automation: update xilinx test scripts (tty))
This patch introduced a CI failure due to a timeout in xilinx-x86_64 test.
Change xilinx-x86_64 and xilinx-arm64 scripts to use "expect" utility
to determine test result and allow early exit from tests.
Add "expect" to xilinx container environment (dockerfile).
Rename references to "QEMU" in "qemu-key.exp" expect script to "TEST" to be
used by both QEMU and hardware tests.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 5e99a40ea5)
Fix flaw in qemu-*.sh tests that producess a false success. The following
lines produces success despite the "expect" script producing nonzero exit
status:
set +e
...
./automation/scripts/qemu-key.exp | sed 's/\r\+$//'
(end of file)
The default exit status for a pipeline using "|" operator is that of the
rightmost command. Fix this by setting the "pipefail" option in the shell,
and removing "set +e" allowing the expect script to determine the result.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 740c41ca05)
Update serial device names from ttyUSB* to test board specific names.
Update xilinx-smoke-dom0-x86_64 with new Xen command line console options,
which are now set as Gitlab CI/CD variables. Abstract the directory where
binaries are stored. Increase the timeout to match new setup.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 95764a0817)
After commit c36efb7fce ("automation: use expect to run QEMU") we lost
the \r filtering introduced by b576497e3b ("automation: remove CR
characters from serial output"). This patch reintroduced it.
Fixes: c36efb7fce ("automation: use expect to run QEMU")
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
(cherry picked from commit aa80a04df4)
The expectation is that QEMU_TIMEOUT should be set as a Gitlab CI/CD
variable but if not we should be able to run the pipeline anyway.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Michal Orzel <michal.orzel@amd.com>
(cherry picked from commit 1e2a5f991f)
Add a test script and related job for running x86_64 dom0 tests.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 6979e17b3f)
Roger Pau Monné
Frediano Ziglio
Andrew Cooper
Andrii Sultanov
Alejandro Vallejo
Matthew Barnes
Julien Grall
Jason Andryuk
Jan Beulich
Javi Merino
Marek Marczykowski-Górecki
Stefano Stabellini
Victor Lira
Stefano Stabellini