block-log.c: In function 'ctl_close_sock':
block-log.c:363:23: warning: array subscript is above array bounds
[-Warray-bounds]
Adjust loop condition in ctl_close_sock() to fix warning.
Adjust array acccess in ctl_close() to actually access the array
member.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
vhd_journal_write_entry
-O2 -Wall -Werror triggers these warnings:
libvhd-journal.c: In function 'vhd_journal_write_entry':
libvhd-journal.c:335: warning: statement with no effect
Really return the error from vhd_journal_write() to caller.
v2:
- simplify the patch by just adding the missing return statement
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Keir Fraser <keir@xen.org>
Apparently Windows 8 refuse to use any mode if has more than one page.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Vesa specification require that mode information return if a given
mode is supported or not so test if we can support it checking
required memory and set correctly supported bit.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Informations are stored in a structure that is smaller than final one.
Previous code copy this structure to stack extending with zeroes then
update it and copy to caller while now the not-extended version is
copied into stack and then is extended during copy reducing stack
usage.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
If you try to get mode information for an unsupported mode
interrupt should return error but not that the function is not
supported.
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Remove an overflow computing width x height x bit which does
not fit into a 16 bits. I wrote a routine to multiple these value
and get the size required for framebuffer in segment unit (64k).
Signed-off-by: Frediano Ziglio <frediano.ziglio@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Hardcode uint8_t, uint16_t and uint32_t typedefs, so we no longer need
stdint.h
Resolves problem reported by Wang Zhihao on 64bit Ubuntu systems.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
This patch adds better support for both Flex and Bison, which might
be needed to compile libxl. Now configure script sets BISON and FLEX
Makefile vars if bison and flex are found, but doesn't complain if
they are not found.
Also, added some Makefile soccery to print a warning message if
Bison or Flex are needed but not found.
[ Improved the warning message slightly. -iwj ]
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
the domain specific scheduling parameters like cpu_weight, cap, slice, ...
will be set during creating the domain, so this parameters can be defined
in the domain config file
[ Improved the documentation wording slightly. -iwj ]
Signed-off-by: Dieter Bloms <dieter@bloms.de>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
I missed a couple of memsets in 25237:31489be80c51, we need to use
libxl_domain_config_init everywhere and not memset since not all fields are
initialised to zero now (the type field in particular). This fixes an abort
with "xl list <dom>" for a specific domain due to assert(type == -1) in
libxl_domain_build_info_init_type().
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
This patch makes sure the passthrough device belongs to pciback before
allow them passthrough to the guest. There are still many other
checks missing.
xm terminates the guest startup process when this type of condition is
found. This patch just allows the guest to continue to boot but with
no device passthrough.
Signed-off-by: Allen Kay <allen.m.kay@intel.com>
Signed-off-by: Xudong Hao <xudong.hao@intel.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
(also make note about AMD support's experimental status)
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently this struct is too complicated for the IDL to represent (arrays) so
for now implement by hand.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Since the key information can be fairly simply put on the command-line,
there's no need to require an actual config file.
Also improve the help to cross-reference the xlcpupool.cfg manpage.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, if "xl cpupool-create" is called with no cpus configured,
xl will choose a cpu at random from the list of unassigned cpus, and
if no unassigned cpus are available, it will fail.
This seems to me to be a poor interface. For one, it makes it impossible
to create an empty cpupool using the xl command-line, except by creating
a pool and then removing the cpus from it. For two, I don't think assigning
a random cpu is a feature; it's not unreasonable for the user to specify
which cpus to add to which pools.
This patch changes the behavior of "xl cpupool-create" to create an empty
pool if no cpus are specified. I believe this interface to be more expected
and more script-friendly.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Only libxl_xen_config_dir_path and libxl_lock_dir_path are used outside the
library. Also bindir, sbindir, sharedir and xenpagingdir appeared to be
completely unused so nuke them.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Use python-config utility when possible, and if it is not present switch to
distutils.
Should fix the bug reported by Olaf Hering on SuSE.
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
distclean removed config/Tools.mk which was needed by tools/Rules.mk, thus
preventing distclean from running properly in the tools directory. This patch
only enforces config/Tools.mk presence when not performing a clean/distclean
target
Signed-off-by: Roger Pau Monne <roger.pau@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Check the return values of the libxc mem_access calls. Free allocated
structures (platform_info, domain_info) on errors during
initialization and exit. Unbind VIRQ, close event channel and
connection to Xen on errors during initialization
Signed-off-by: Aravindh Puthiyaparambil <aravindh@virtuata.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl__domain_build_info_setdefault may be called several times,
so rtc_timeoffset can't be setted in it.
Move rtc_timeoffset setting logic to libxl__build_pre.
Reported-by: Teck Choon Giam <giamteckchoon@gmail.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Lin Ming <mlin@ss.pku.edu.cn>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
---
tools/libxl/libxl_create.c | 9 ---------
tools/libxl/libxl_dom.c | 17 +++++++++++++++--
2 files changed, 15 insertions(+), 11 deletions(-)
Dan Magenheimer explains in <4c2f7fca-dda2-4598-aaab-3a6a3fe532cd@default>:
I think the tmem_destroy functionality pre-dates the
existence of tmem "freeable" memory* and was a way for
a toolset to force the hypervisor to free up the hypervisor
memory used by some or all ephemeral tmem pools. Once the
tmem allocation/free process was directly linked into
alloc_heap_pages() in the hypervisor (see call to
tmem_relinquish_pages()), this forcing function was
no longer needed.
So, bottom line, I *think* it can be ripped out, or at least
for now removed from the definition of the stable xl API/UI.
The libxl.c routine libxl_tmem_destroy() could also be
removed if you like, but I guess I'd prefer to leave the
lower level droppings in xc.c and in the hypervisor in case
I am misremembering.
Accordingly remove this interface from libxl and xl but don't touch libxc or
the hypervisor.
This is the only libxl_tmem_* function which might potentially have required
conversion to be asynchronous and which therefore might have been a potential
API stability concern.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Dan Magenheimer <dan.magenheimer@oracle.com>
This test script runs "xl -N network-attach 0 <foobar>" against various
rate syntax and checks that the output is as expected.
[ Added entries to .hgignore and .gitignore for tools/libxl/tmp.* -iwj ]
Signed-off-by: Mathieu Gagne <mgagne@iweb.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The `rate` keyword specifies the rate at which the outgoing traffic
will be limited to. The default if this keyword is not specified
is unlimited.
The `rate` keyword supports an optional replenishment interval
parameter for specifying the granularity of credit replenishment.
It determines the frequency at which the vif transmission credit
is replenished. The default interval is 50ms.
For example:
'rate=10Mb/s'
'rate=250KB/s'
'rate=1MB/s@20ms'
Signed-off-by: Mathieu Gagne <mgagne@iweb.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Replace alloca() with mmap() for array sizes greater than a page in
xc_linux_osdep.c.
When mapping in large amounts of pages (in the GB range) from a guest
in to Dom0 using xc_map_foreign_bulk(), a segfault occurs in the libxc
client application. This is because the pfn array in
linux_privcmd_map_foreign_bulk() is being allocated using alloca() and
the subsequent memcpy causes the stack to blow. This patch replaces
the alloca() with mmap() for pfn array sizes greater than a page.
Fix an error print with the correct function name.
Do the same for the map array in linux_gnttab_grant_map()
Signed-off-by: Aravindh Puthiyaparambil <aravindh@virtuata.com>
Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently `xl vncviewer $dom` does not work because the VNC port is not
registered in xenstore when using qemu-upstream. This patch attempted to fix
this.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
-O2 -Wall -Werror triggers these warnings:
io.c: In function 'do_send':
io.c:196: warning: ignoring return value of 'writev', declared with attribute warn_unused_result
io.c: In function 'do_recv':
io.c:287: warning: ignoring return value of 'writev', declared with attribute warn_unused_result
writev to -1 will always fail, silence the warning by removing the offending
(disabled) debug code.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
tools/libfsimage/Rules.mk relies on having certain variables set already; if
they're not set, the definitions dont' work right. The result was a bunch
of empty files and pygrub failing with an uninformative error message.
It's likely that this didn't cause anyone problems becasue changing the
Makefiles didn't cause a re-build; building from a fresh repo results in
completely empty filesystem plugin binaries.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
We introduce a new "carefd" concept, which relates to fds that we care
about not being inherited by long-lived children.
As yet we do not use this anywhere in libxl. Until all locations in
libxl which make such fds are converted, libxl__postfork may not work
entirely properly. If these locations do not use O_CLOEXEC (or use
calls for which there is no O_CLOEXEC) then multithreaded programs may
not work properly.
This introduces a new API call libxl_postfork_child_noexec which must
be called by applications which make long-running non-execing
children. Add the appropriate call to xl's postfork function.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Introduce definition and use of a new function-local macro REQUIRE_FDS
to avoid repeatedly spelling out which fds we are interested in.
We are going to introduce a new fd for the SIGCHLD self-pipe.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
libxl's task has become too complicated (particularly in the presence
of both forking and multithreading) to support reuse of the same
libxl_ctx after fork.
So abolish libxl_ctx_fork. xl instead simply initialises a new
libxl_ctx.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Ie, we permit general code in libxl direct access to the manifest
constants such as XEN_RUN_DIR. This simplifies their use in (eg)
format strings.
This might be controversial because it will make it difficult to make
any of these runtime-configurable later without changing lots of use
sites. But I don't think it's likely we'll want to do that.
For the moment, leave existing call sites of all the functions in
libxl_paths.c unchanged. The simplified use arrangements can be used
in new code and when we update call sites for other reasons.
Also correct the dependencies in the Makefile so that _libxl_paths.h
is generated before anything that uses libxl_internal.h.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
We introduce:
<type> *GCNEW(<type> *var);
<type> *GCNEW_ARRAY(<type> *var, ssize_t nmemb);
<type> *GCREALLOC_ARRAY(<type> *var, size_t nmemb);
char *GCSPRINTF(const char *fmt, ...);
void LOG(<xtl_level_suffix>, const char *fmt, ...);
void LOGE(<xtl_level_suffix>, const char *fmt, ...);
void LOGEV(<xtl_level_suffix>, int errnoval, const char *fmt, ...);
all of which expect, in the calling context,
libxl__gc *gc;
Most of these will find callers in subsequent patches. The exceptions
are the orthogonally necessary LOGE and LOGEV, and GCREALLOC_ARRAY.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Arrange that if we pass NULL as a gc, we simply don't register the
pointer. This instantly gives us non-gc'ing but error-checking
versions of malloc, realloc, vasprintf, etc.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Formally change the libxl memory allocation failure policy to "crash".
Previously we had a very uneven approach; much code assumed that
libxl__sprintf (for example) would never return NULL, but some code
was written more carefully.
We think it is unlikely that we will be able to make the library
actually robust against allocation failure (since that would be an
awful lot of never-tested error paths) and few calling environments
will be able to cope anyway. So, instead, adopt the alternative
approach: provide allocation functions which never return null, but
will crash the whole process instead.
Consequently,
- New noreturn function libxl__alloc_failed which may be used for
printing a vaguely-useful error message, rather than simply
dereferencing a null pointer.
- libxl__ptr_add now returns void as it crashes on failure.
- libxl__zalloc, _calloc, _strdup, _strndup, crash on failure using
libxl__alloc_failed. So all the code that uses these can no longer
dereference null on malloc failure.
While we're at it, make libxl__ptr_add use realloc rather than
emulating it with calloc and free, and make it grow the array
exponentially rather than linearly.
Things left to do:
- Remove a lot of now-spurious error handling.
- Remove the ERROR_NOMEM error code.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Keir Fraser
Olaf Hering
Frediano Ziglio
Ian Jackson
Roger Pau Monne
Dieter Bloms
Ian Campbell
Christoph Egger
Xudong Hao
Andres Lagar-Cavilla
George Dunlap
Tim Deegan
Aravindh Puthiyaparambil
Lin Ming
Mathieu Gagne
Stefano Stabellini
Anthony PERARD