Its sole caller is, and the wrong annotation would cause a build failure
(non-empty .text) if the compiler chose to not inline the function when at
the same time LATE_HWDOM=y.
Fixes: be52cb139f ("x86/mmcfg: add handlers for the PVH Dom0 MMCFG areas")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: bdd5f35cf2
master date: 2026-01-08 11:05:30 +0100
The current logic splits the update of the amount of available memory in
the system (total_avail_pages) and pending claims into two separately
locked regions. This leads to a window between counters adjustments where
the result of total_avail_pages - outstanding_claims doesn't reflect the
real amount of free memory available, and can return a negative value due
to total_avail_pages having been updated ahead of outstanding_claims.
Fix by adjusting outstanding_claims and d->outstanding_pages in the same
place where total_avail_pages is updated. Note that accesses to
d->outstanding_pages is protected by the global heap_lock, just like
total_avail_pages or outstanding_claims. Add a comment to the field
declaration, and also adjust the comment at the top of
domain_set_outstanding_pages() to be clearer in that regard.
Note that failures in assign_pages() causes the claimed amount that has
been allocated to be lost, as the amount is not added back to the domain
quota once pages are freed. Given the intended usage of claims is limited
to initial physmap populate, and the current failure paths in
assign_pages() would lead to the domain being destroyed anyway, don't
add extra logic to recover the claimed amount on failure - it's just adding
complexity for no real benefit.
Fixes: 65c9792df6 ("mmu: Introduce XENMEM_claim_pages (subop of memory ops)")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 75d29d9b5e
master date: 2026-01-08 11:05:30 +0100
XENMAPSPACE_gmfn{_range} allows moving gfn around the guest p2m: the mfn
behind the source gfn is zapped from the origin and mapped at the
requested destination gfn. The destination p2m entries are always created
with type p2m_ram_rw.
With the current checking done in xenmem_add_to_physmap_one() it's possible
to use XENMAPSPACE_gmfn{_range} to change the type of a p2m entry. The
source gfn is only checked to be not shared, and that the underlying page
is owned by the domain.
Make the source checks more strict, by checking that the source gfn is of
type read/write RAM or logdirty. That prevents the operation from
inadvertently changing the type as part of the move.
Fixes: 3e50af3d87 ("New XENMAPSPACE_gmfn parameter for XENMEM_add_to_physmap.")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: c9491ea21a
master date: 2026-01-08 11:05:30 +0100
Pass the TPM2 ACPI table so that the device can be found by a PVH dom0.
Otherwise dom0 shows:
tpm_tis MSFT0101:00: [Firmware Bug]: failed to get TPM2 ACPI table
tpm_tis MSFT0101:00: probe with driver tpm_tis failed with error -22
TCPA is "Trusted Computing Platform Alliance table", but it is really
the table for a TPM 1.2. Pass that as well.
While doing this, move ACPI_SIG_WPBT to alpabetize the entries.
This exposes TPM event log tables on PVH dom0, bring it in line with a
PV dom0.
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 46f3ed0d53
master date: 2025-12-16 09:40:18 +0100
Just like for PV guests MMU_MACHPHYS_UPDATE implies marking of the
respective page as dirty, additions to a HVM guest's P2M should do so.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
[jb: backport limited to the new paging_mark_pfn_dirty() use]
master commit: 98fccdf0ac
master date: 2025-12-11 09:50:30 +0100
Add the missing index increase in the M2P clearing loop, otherwise the loop
keeps pointlessly setting the same MFN entry repeatedly. This seems to be
an oversight from the change that introduced support to process high order
pages in one go.
Fixes: 3c352011c0 ("x86/PoD: shorten certain operations on higher order ranges")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 8e4d495cb8
master date: 2025-12-11 09:50:10 +0100
We have two different functions explaining that DE_CFG is Core-scoped and that
writes are racy but happen to be safe. This is only true when there's one of
them.
Introduce amd_init_de_cfg() to be the singular function which writes to
DE_CFG, modelled after the logic we already have for BP_CFG.
While reworking amd_check_zenbleed() into a simple predicate used by
amd_init_de_cfg(), fix the microcode table. The 'good_rev' was specific to an
individual stepping and not valid to be matched by model, let alone a range.
The only CPUs incorrectly matched that I can locate appear to be
pre-production, and probably didn't get Zenbleed microcode.
Rework amd_init_lfence() to be amd_init_lfence_dispatch() with only the
purpose of configuring X86_FEATURE_LFENCE_DISPATCH in the case that it needs
synthesising. Run it on the BSP only and use setup_force_cpu_cap() to prevent
the bit disappearing on a subseuqent CPUID rescan.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: d0c75dc4c0
master date: 2025-12-01 16:20:41 +0000
This was potentially helpful when the chickenbit was the only mitigation and
microcode had not been released, but that was two years ago.
Zenbleed microcode has been avaialble since December 2023, and the subsequent
Entrysign signature vulnerability means that firmware updates block OS-loading
and more OS-loadable microcode will be produced for Zen2.
i.e. the Zenbleed fix is not going to appear at runtime these days.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: 5cd1ac1575
master date: 2025-11-27 18:22:20 +0000
When setting a timer's config register, timer_sanitize_int_route will
always reset the IRQ route value to what's valid corresponding to the
!HPET_CFG_LEGACY case. This is applied even if the HPET is set to
HPET_CFG_LEGACY.
When some operating systems (e.g. Windows) try to write to a timer
config, they will verify and rewrite the register if the values don't
match what they expect. This causes an unnecessary write to HPET_Tn_CFG.
Note, the HPET specification states that for the Tn_INT_ROUTE_CNF field:
"If the value is not supported by this prarticular timer, then the value
read back will not match what is written. [...] If the LegacyReplacement
Route bit is set, then Timers 0 and 1 will have a different routing, and
this bit field has no effect for those two timers."
Therefore, Xen should not reset timer_int_route if legacy mode is
enabled, regardless of what's in there.
Fixes: ec40d3fe21 ("x86/vhpet: check that the set interrupt route is valid")
Signed-off-by: Tu Dinh <ngoc-tu.dinh@vates.tech>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: fb0e37df71
master date: 2025-11-26 12:10:21 +0100
The usage of atomic_dec_and_test() in msixtbl_pt_unregister() is inverted:
the function will return true when the refcount reaches 0. The current
code does the opposite and calls del_msixtbl_entry() when there are still
refcounts held on the object.
However all callers of msixtbl_pt_unregister() are serialized on the domctl
lock, and hence there cannot be parallel calls to msixtbl_pt_unregister()
that could lead to double freeing of the same object.
The incorrect freeing with active msixtlb entries will result in a possible
guest visible malfunction, but no internal Xen state corruption.
While entries are leaked once the last pIRQ is unbound, the same entry
would get re-used if the device has pIRQs bound again. The guest cannot
exploit this incorrect refcount check to leak arbitrary amounts of memory
by repeatedly enabling and disabling (binding and unbinding) MSI-X entries.
Fixes: 34097f0d30 ('hvm: passthrough MSI-X mask bit acceleration')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: ea87662c77
master date: 2025-11-26 09:46:17 +0100
The xen-ucode utility is sensitive to the overall error as -EEXIST is a
special case for success, but the real error can get clobbered with -EBUSY.
This can be demonstrated most easily by force loading an old microcode, which
should yield -EIO but yields -EBUSY:
# xen-ucode /lib/firmware/amd-ucode/microcode_amd_fam17h.bin --force
Failed to update microcode. (err: Device or resource busy)
(XEN) 256 cores are to update their microcode
(XEN) microcode: CPU0 update rev 0x830107d to 0x830107c failed, result 0x830107d
(XEN) Late loading aborted: CPU0 failed to update ucode: -5
wait_for_state() returns false on encountering LOADING_EXIT. Right now, this
is always transformed into -EBUSY and passed back to callers.
However, control_thread_fn() can move directly to this state in the case of an
early error; it is not an error condition for APs, but the latest write into
stopmachine_data.fn_result wins, causing the real error, -EIO, to get
clobbered with -EBUSY.
Drop all the -EBUSY's, and treat hitting LOADING_EXIT as a success case. This
causes only a single error to be returned through stop_machine_run(), and
preserves the -EIO
# xen-ucode /lib/firmware/amd-ucode/microcode_amd_fam17h.bin --force
Failed to update microcode. (err: Input/output error)
(XEN) 256 cores are to update their microcode
(XEN) microcode: CPU0 update rev 0x830107d to 0x830107c failed, result 0x830107d
(XEN) Late loading aborted: CPU0 failed to update ucode: -5
Fixes: 5ed12565aa ("microcode: rendezvous CPUs in NMI handler and load ucode")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: a405bf42ed
master date: 2025-11-24 15:17:39 +0000
The error messages that the compiler may emit can be confusing.
The check was also the wrong way round in case multiple make targets are
specified: We want to do the check whenever targets other than the running
and cleaning ones are specified.
Fixes: 05f4cc2192 ("x86emul: suppress default test harness build with incapable compiler")
Fixes: d5997399b7 ("x86emul: suppress "not built" warning for test harness'es run targets")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: c482d1f59f
master date: 2025-11-24 11:28:47 +0100
Many *.c files are symlinked while building, so along with generated *.h
files they ought to be removed. Conversely $(TARGET) doesn't need removing
twice.
Fixes: cb4fcf70b2 ("x86emul: parallelize SIMD test code building")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 774c382b28
master date: 2025-11-13 09:08:27 +0100
These files 'docs/misc/kconfig{,-language}.txt' were deleted, but
references are still present in Xen. Remove them to clean-up.
Fixes: 044503f61c ("docs: Delete kconfig docs to fix licensing violation")
Fixes: f80fe2b34f ("xen: Update Kconfig to Linux v5.4")
Signed-off-by: Dmytro Prokopchuk <dmytro_prokopchuk1@epam.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
master commit: c22b6dced0
master date: 2025-11-11 14:44:47 +0100
The stimer enlightment was removed from the defaults list in commit
e83077a3d1 ("libxl: don't enable synthetic timers by default") but the
corresponding docs change was not made. Removing from docs as enabling the
enlightenment will hang Windows 10 guests.
Fixes: e83077a3d1 ("libxl: don't enable synthetic timers by default")
Signed-off-by: James Dingwall <james@dingwall.me.uk>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: d510f9c143
master date: 2025-11-10 16:56:03 +0000
The default terminal settings in Linux will enable echo which interferes with
these tests. Set the value in the script to avoid failure caused by a settings
reset.
Signed-off-by: Victor Lira <victorm.lira@amd.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 2f73ef4bd7)
Otherwise it's not possible for device models to map IRQs of devices on
segments different than 0. Keep the same function prototype and pass the
segment in the high 16bits of the bus parameter, like it's done for the
hypercall itself.
Amends: 7620c0cf9a ("PCI multi-seg: add new physdevop-s")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
master commit: b7838d12bd
master date: 2025-10-21 16:56:19 +0100
With large NR_CPUS on-stack cpumask_t variables are problematic. Now that
the IRQ handler can't be invoked in a nested manner anymore, we can
instead use a per-CPU variable. While we can't use scratch_cpumask in code
invoked from IRQ handlers, simply amend that one with a HPET-special form.
(Note that only one of the two IRQ handling functions can come into play
at any one time.)
Fixes: 996576b965 ("xen: allow up to 16383 cpus")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 80c7c67164
master date: 2025-10-29 09:02:53 +0100
If a SR-IOV card presents an I/O space inside a BAR the
code will continue to loop on the same card.
This is due to the missing increment of the cycle variable.
Fixes: a1a6d59862 ("pci: split code to size BARs from pci_add_device")
Signed-off-by: Frediano Ziglio <frediano.ziglio@cloud.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: f7091c0e1f
master date: 2025-10-27 15:52:20 +0100
Using dynamically allocated / maintained vectors has several downsides:
- possible nesting of IRQs due to the effects of IRQ migration,
- reduction of vectors available for devices,
- IRQs not moving as intended if there's shortage of vectors,
- higher runtime overhead.
As the vector also doesn't need to be of any priority (first and foremost
it really shouldn't be of higher or same priority as the timer IRQ, as
that raises TIMER_SOFTIRQ anyway), simply use the lowest one above the
legacy range. The vector needs reserving early, until it is known whether
it actually is used. If it isn't, it's made available for general use.
With a fixed vector, less updating is now necessary in
set_channel_irq_affinity(); in particular channels don't need transiently
masking anymore, as the necessary update is now atomic. To fully leverage
this, however, we want to stop using hpet_msi_set_affinity() there. With
the transient masking dropped, we're no longer at risk of missing events.
AMD interrupt remapping code so far didn't "return" a consistent MSI
address when translating an MSI message. Clear respective fields there, to
keep the related assertion in set_channel_irq_affinity() from triggering.
Fixes: 996576b965 ("xen: allow up to 16383 cpus")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 8ef32772b5
master date: 2025-10-27 15:51:42 +0100
Keeping channels enabled when they're unused is only causing problems:
Extra interrupts harm performance, and extra nested interrupts could even
have caused worse problems. However, on all Intel hardware I looked at
closely, a 0->1 transition of the enable bit causes an immediate IRQ.
Hence disabling channels isn't a good idea there. Set a "long" timeout
instead.
Along with that also "clear" the channel's "next event", for it to be
properly written by whatever the next user is going to want (possibly
avoiding too early an IRQ).
Further, along the same lines, don't enable channels early when starting
up an IRQ. This doesn't need to happen earlier than from
set_channel_irq_affinity() (once a channel goes into use the very first
time). This eliminates a single instance of
(XEN) [VT-D]INTR-REMAP: Request device [0000:00:1f.0] fault index 0
(XEN) [VT-D]INTR-REMAP: reason 25 - Blocked a compatibility format interrupt request
during boot. (Why exactly there's only one instance, when we use multiple
counters and hence multiple IRQs, I can't tell. My understanding would be
that this was due to __hpet_setup_msi_irq() being called only after
request_irq() [and hence the .startup handler], yet that should have
affected all channels.)
Fixes: 3ba523ff95 ("CPUIDLE: enable MSI capable HPET for timer broadcast")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 24f608dc90
master date: 2025-10-27 15:51:03 +0100
A .disable handler can't typically be re-used for .ack: The latter needs
to deal with IRQ migration, while the former shouldn't. Furthermore
invoking just irq_complete_move() isn't enough; one of
move_{native,masked}_irq() also needs invoking.
Fixes: 487a1cffd7 ("x86: Implement per-cpu vector for xen hypervisor")
Fixes: f821102450 ("x86: IRQ Migration logic enhancement")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: aed6278b2a
master date: 2025-10-21 14:11:45 +0200
By observation GNU ld 2.25 may emit file symbols for .data.read_mostly
when linking xen.efi. Due to the nature of file symbols in COFF symbol
tables (see the code comment) the symbols_offsets[] entries for such
symbols would cause assembler warnings regarding value truncation. Of
course the resulting entries would also be both meaningless and useless.
Add a heuristic to get rid of them, really taking effect only when
--all-symbols is specified (otherwise these symbols are discarded
anyway).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
master commit: 2f21ce1a6a
master date: 2025-10-21 14:10:46 +0200
When Entrysign has been mitigated in firwmare, it is believed to be safe to
rely on the CPU patchloader again. This avoids us needing to maintain the
digest table for all new microcode indefinitely.
Relax the digest check when firmware looks to be up to date, and leave behind
a clear message when not.
When the Zen6 (also Fam1ah processors) model numbers are known, they'll want
excluding from the range.
This is best-effort only. If a malicious microcode has been loaded prior to
Xen running, then all bets are off.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
(cherry picked from commit ff8228ab46)
After initial publication, the SB-7033 / CVE-2024-36347 bulletin was updated
to list Zen5 CPUs as vulnerable. Use Fam1ah as an upper bound, and adjust the
command line documentation.
When the Zen6 (also Fam1ah processors) model numbers are known, they'll want
excluding from the range.
Fixes: 630e8875ab ("x86/ucode: Perform extra SHA2 checks on AMD Fam17h/19h microcode")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
(cherry picked from commit c2529496d0)
For Zen3-5 microcode blobs signed with the updated signature scheme, the
checksum field has been reused to be a min_revision field, referring to the
microcode revision which fixed Entrysign (SB-7033, CVE-2024-36347).
Cross-check this when trying to load microcode, but allow --force to override
it. If the signature scheme is genuinely different, a #GP will occur.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
(cherry picked from commit b3f015b8ba)
[Note: --force doesn't exist in this version of Xen]
EIO is not the only error that ucode_ops.apply_microcode() can produce.
EINVAL, EEXISTS and ENXIO can be generated too, each of which mean that Xen is
unhappy in some way with the proposed blob.
Some of these can be bypassed with --force, which will cause the parallel load
to be attempted.
Fixes: 5ed12565aa ("microcode: rendezvous CPUs in NMI handler and load ucode")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
(cherry picked from commit e0bb712a28)
[Note: --force doesn't exist in this version of Xen]
Currently, the URL where the ECLAIR MISRA C scan reports are saved
is hardcoded; making it configurable allows multiple runners and storage
servers to be used without resorting to publishing all artifacts
to the same report server.
Additionally, reports will be accessed publicly by using a proxy,
therefore the address that needs to be printed in GitLab analysis logs
is that of the public url, rather than the location where they are stored.
Signed-off-by: Alessandro Zucchelli <alessandro.zucchelli@bugseng.com>
Signed-off-by: Nicola Vetrini <nicola.vetrini@bugseng.com>
[stefano: remove unneeded exports]
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
(cherry picked from commit bea38de1bd)
64-bit BAR memory address is truncated when removing a passthrough
pci device from guest since it uses "unsigned int".
So, change to use 64-bit type to fix this problem.
This is XSA-476 / CVE-2025-58149.
Fixes: b0a1af6167 ("libxenlight: implement pci passthrough")
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
(cherry picked from commit 421432b822)
Commit 53859596c0 depends on the behavioral change introduced in
ee2eb6849d that inverted the initialization of the MSI-X and header vPCI
handlers. 53859596c0 requires the header to be initialized before MSI-X.
Change the order of initialization and adjust init_msix() to carve holes
for the MSI-X tables if necessary, since it will now run after the BARs
have been possibly mapped into the domain p2m.
Fixes: 50b649c742 ("vpci/msix: improve handling of bogus MSI-X capabilities")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Callers can pass in a vpmask which exceeds d->max_vcpus. Prevent out-of-bound
reads of d->vcpu[].
This is XSA-475 / CVE-2025-58148.
Fixes: 728acba1ba ("viridian: use hypercall_vpmask in hvcall_ipi()")
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: cc64c24502
master date: 2025-10-21 14:10:13 +0200
Callers can pass vp/mask values which exceed the size of vpmask->mask. Ensure
we only set bits which are within bounds.
This is XSA-475 / CVE-2025-58147.
Fixes: b4124682db ("viridian: add ExProcessorMasks variants of the flush hypercalls")
Signed-off-by: Teddy Astie <teddy.astie@vates.tech>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: 36e90c4ef1
master date: 2025-10-21 14:09:37 +0200
When the fixes commit re-arranged the code, it made edd=off jump to the
mbr code instead of returning from the function. Previously edd_done
was immediately before ret and skipped the MBR check.
Replace edd_done with .Ledd_mbr_sig for the start of the MBR checking,
and replace .Ledd_mbr_sig_skip with .Ledd_done to exit from the function.
edd=off jumps to .Ledd_done to return from the function, and internal
jumps go to .Ledd_mbr_sig to check edd=skipmbr.
Fixes: 5ec164fd61 ("x86/boot: re-arrange how/when we do disk I/O")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 02e656f7c8
master date: 2025-10-16 10:25:27 +0200
The function returning zero is an error indication; we shouldn't try to
map MFN 0 and then treat that page as a context table.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: ef5b718cf8
master date: 2025-10-13 16:50:01 +0200
The variable can be cleared (set to false) by a non-init function's error
path (hwp_init_msrs()).
Fixes: 99c4570f82 ("cpufreq: Add Hardware P-State (HWP) driver")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
master commit: 4676e09b3c
master date: 2025-10-13 10:41:35 +0200
I've had the luck to come across a PCI card that exposes a MSI-X capability
where the BIR of the vector and PBA tables points at a BAR that has 0 size.
This doesn't play nice with the code in vpci_make_msix_hole(), as it would
still use the address of such empty BAR (0) and attempt to carve a hole in
the p2m. This leads to errors like the one below being reported by Xen:
d0v0 0000:22:00.0: existing mapping (mfn: 181c4300 type: 0) at 0 clobbers MSIX MMIO area
And the device left unable to enable memory decoding due to the failure
reported by vpci_make_msix_hole().
Introduce checking in init_msix() to ensure the BARs containing the MSI-X
tables are usable. This requires checking that the BIR points to a
non-empty BAR, and the offset and size of the MSI-X tables can fit in the
target BAR.
This fixes booting PVH dom0 on Supermicro AS -2126HS-TN servers with AMD
EPYC 9965 processors. The broken device is:
22:00.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 93)
There are multiple of those integrated controllers in the system, all
broken in the same way.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
master commit: 53859596c0
master date: 2025-10-10 11:02:39 +0200
Reading from the E9 port if the emergency console is active should return
0xe9 according to the documentation from Bochs:
https://bochs.sourceforge.io/doc/docbook/user/bochsrc.html
See `port_e9_hack` section description.
Fix Xen so it also returns the port address. OSes can use it to detect
whether the emergency console is available or not.
Fixes: d1bd157fbc ("Big merge the HVM full-virtualisation abstractions.")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
master commit: db5a3c31a6
master date: 2025-10-02 18:05:50 +0200
Otherwise the check for the SS feature in
check_memory_type_self_snoop_errata() fails unconditionally, which leads to
X86_FEATURE_XEN_SELFSNOOP never being set.
We could also avoid this by not doing the reset_cpuinfo() for the BSP in
identify_cpu(), because SS detection uses boot_cpu_data. However that
creates an imbalance on the state of the BSP versus the APs in the
identify_cpu() code.
I've opted for the less controversial solution of populating FEATURESET_1d
in generic_identify(), as the value is already there. The same is done for
the AMD faulting probe code. While there also populate the FEATURESET_1c
element, as the value is in context.
Fixes: f2663ca2e5 ("x86/cpu/intel: Clear cache self-snoop capability in CPUs with known errata")
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 382dd0d166
master date: 2025-09-25 16:07:05 +0200
PVH guests have no DM, so this causes the guest to fetch the online CPU
bitmap from an unbacked 0xaf00 PIO port when executing the GPE handler.
Seeing how ACPI CPU hotplug is the only event delivered via GPE, remove
the GPE handler in addition to anything ACPI CPU hotplug related.
This shrinks PVH's DSDT substantially and prevents spuriously executing
a large amount of AML with no purpose at all.
Fixes: 062975dc9441("acpi: PVH guests need _E02 method")
Signed-off-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: b59e564aa0
master date: 2025-09-25 09:18:55 +0200
In mca_cap_init function,the mcabanks_alloc allocates and
initializes an mca_banks structure for managing MCA banks,
setting up a bank map and storing the specified or default number
of banks.
After this we will call mcabanks_set(i, mca_allbanks);
The mcabanks_set function sets a specific bit in the bank_map of
an mca_banks structure, provided the structure, its bank_map, and
the bit index are valid.
At the end, we will call
mcabanks_free(xchg(&mca_allbanks, all));
This function is thread safe and does below:
1. Atomically exchanges the value of "mca_allbanks" with "all"
2. Returns the old value that was previously in "mca_allbanks"
So, when we will call mcabanks_free , that will free the memory.
The problem is that mcabanks_set(i, mca_allbanks) function is updating
mca_allbanks which will be freed via mcabanks_free later. This means
new mca_allbanks instance("all") will never get chance to update
it's bank_map.
Due to this when we will collect log from mcheck_mca_logout function ,
the condition "if ( !mcabanks_test(i, bankmask) )" will always fails
and MCA logs will not be collected for any bank.
The fix is to solve this problem.
Fixes: 560cf418c8 ("x86/mcheck: allow varying bank counts per CPU")
Signed-off-by: Soham Dandapat <soham.dandapat@amd.com>
Reviewed-by: Jason Andryuk <jason.andryuk@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
master commit: 532988dccc
master date: 2025-09-09 08:18:11 +0200
We have a mix of root and non-root containers, and are trying to become
rootless. This can cause the local CPIO fragements to end up being user:user
in the test environment.
Nothing seems to go wrong so far, but it's a trap waiting to happen.
Make everything consistently root for the initrds, irrespective of the
rootness of the container the test is running in.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit e3042c9fc2)
This also moves executables too.
I'm not sure why xilinx-smoke-dom0-x86_64.sh was overriding PATH too, as
/usr/local is clearly in PATH given the other tests, but drop that too.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
(cherry picked from commit 7f8c2dd829)
Jan Beulich