Some versions of GCC complain that the 'firmware' variable can be used
uninitialized. It looks like the switch inside of the else case is just
confusing GCC.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The hunk that prints out error message can only be reached from the loop
that allocates memory. Move that hunk into the loop to avoid confusing
gcc.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Roger Pau Monne <roger.pau@citrix.com>
The foreign header generation blindly replaces 'uint64_t' with '__align8__
uint64_t', to get correct alignment when built as 32bit. This is correct in
most circumstances, but Clang objects to two specific uses.
* Inside a sizeof() expression
* As part of a typecast
An example error looks like:
/local/xen.git/tools/libxc/../../tools/include/xen/foreign/x86_64.h:204:44:
error: 'aligned' attribute ignored when parsing type [-Werror,-Wignored-attributes]
__align8__ uint64_t evtchn_mask[sizeof(__align8__ uint64_t) * 8];
^~~~~~~~~~
/local/xen.git/tools/libxc/../../tools/include/xen/foreign/x86_64.h:13:36:
note: expanded from macro '__align8__'
^~~~~~~~~~~
This sedary is sufficient to fix all the bad examples without touching any of
the legitimate uses, and is more simple than teaching mkheader.py how to parse
C.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
hvmloader is unhosted, and shouldn't use the system errno.h. It already has
to use Xen's errno.h for other hypercalls. The use of public/io/xs_wire.h
requires the use of un-prefixed errno values.
This fixes the build on stricter toolchains where requesting -fno-builtin does
reduce the include path as much as it can.
Reported-by: Doug Goldstein <cardoe@cardoe.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
to include the vcpu IDs, in a way that matches
how the "dom:vcpu" couple is displayed in other
events (runstate changes).
Also add the trace for TRC_SCHED_SHUTDOWN_CODE which
was missing and was done via SCHEDOP_shutdown_code hypercall.
(TRC_SCHED_SHUTDOWN trace was present).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
---
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Olaf Hering <olaf@aepfle.de>
---
Changes from v1:
* enhanced changelog, as suggested during review.
AC_CHECK_LIB() was running gcc -Llib -lm -lutils conftest.c which on
platforms that do as needed operations by default will result in
underlinking. Instead AC_CHECK_LIB() suggests supplying the extra
libraries necessary in a 5th argument.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
If hardware support memory protect externsion, expose this feature
to guest by default. Users don't have to use a 'cpuid= ' option in
config file to turn it on.
Signed-off-by: Liang Li <liang.z.li@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
bcc/ld86/as86 are necessary when we build ROMBIOS. However if we do not
build it (and are not building qemu-trad), the build requirements are
overly strict and can lead to failures.
Signed-off-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Coverity rightly points out that qmp->buffer may not be NULL
terminated when passed to strncat.
Make the actual buffer a byte bigger than QMP_RECEIVE_BUFFER_SIZE and
always append a NULL byte.
I suspect that in practice we have not yet seen QMP messages
approaching the buffer size (4K).
Compile tested only.
CID: 1055989
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
The contents of /proc/uptime is typically something like "80164.57
640617.58", so the existing 512 byte buffer is more than large enoguh,
so reduce its effective size to 511 bytes and ensure we include a
NULL.
Otherwise Coverity points out that we pass a potentially unterminated
string to strtok. In practice this likely doesn't actually cause
issues (at least on Linux) because the
string should always contain a space so we will stop parsing.
CID: 105590
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Dom0 is handled separately (via print_dom0_uptime) and the domU
variant doesn't work for dom0 since libxl_vm_get_start_time() doesn't.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We assert that nullfd if not std{in,out,err} since that would result
in closing one of the just dup2'd fds. For this to happen
std{in,out,err} would have needed to be closed, at which point all
sorts of other things could go wrong.
CID: 1130519
It was previously hypothesised[0] that fixing 1130516 would solve this
too, but that appears to not have been the case.
Compile tested only.
[0] http://lists.xenproject.org/archives/html/xen-devel/2013-11/msg02931.html
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: andrew.cooper3@citrix.com
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
find_vec() is supposed to find the vector in the list if it exists,
choose an empty slot if it doesn't exist, and return null if all slots
are full.
However, coverity noticed that although the callers of find_vec() handle
the last condition, find_vec() itself didn't.
Check to see if we actually found an empty slot before attempting to
initialize it.
CID 1306864
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Coverity notices that if !head is true, that !N can never be true.
Don't bother checking N, since we know it has to be at least one.
CID 1354243
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Commit 7449fb36 ("migration/save: pass checkpointed_stream from libxl to
libxc ") failed to initialise rc in the error path.
Reported-by: Olaf Hering <olaf@aepfle.de>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
we call (init|cleanup)_subkind_nic and (init|cleanup)_subkind_drbd_disk
directly in checkpoint device. Move them to libxl_remus.c, Call them before
calling libxl__checkpoint_devices_setup() or after calling
libxl__checkpoint_devices_teardown().
it is pure refactoring and no functional changes.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add a new structure remus state, and move concrete layer's private
member to remus state.
it is pure refactoring and no functional changes.
Init interval in libxl__remus_setup(). It is safe to move this initialisation,
because this value is only used for remus, and remus will use this value after
libxl__remus_setup().
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Checkpoint device is an abstract layer to do checkpoint.
COLO can also use it to do checkpoint. But there are
still some codes in checkpoint device which touch remus.
This patch and:
tools/libxl: move remus state into a seperate structure
tools/libxl: seperate device init/cleanup from checkpoint device layer
will seperate remus from checkpoint device layer.
We use remus ops directly in checkpoint device. Store it
in checkpoint device state so that we do not aware of
remus_ops in the checkpoint device layer.
It is pure refactoring and no functional changes.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Acked-by:Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Introduce enum type libxl_checkpointed_stream in IDL.
rename the last argument of migrate_receive from "remus" to
"checkpointed" since the semantics of this parameter has
changed.
NOTE:
libxl_domain_restore_params and domain_create aren't changed here,
checkpointed_stream is still an int. Because we will pass the
value from libxl to libxc.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently struct libxl__domain_suspend_state contains 2 type of states,
one is save state, another is suspend state. This patch separates those
two out.
The motivation of this is that COLO will need to do suspend/resume
continuously, we need a more common suspend state.
After this change, dss stands for libxl__domain_save_state,
dsps stands for libxl__domain_suspend_state.
Also introduce libxl__domain_suspend_init to initialise the
libxl__domain_suspend_state.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
CC: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CC: Wei Liu <wei.liu2@citrix.com>
CC: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by:Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The HVM parameter HVM_PARAM_X87_FIP_WIDTH to allow tools and the guest
to adjust the width of the FIP/FDP registers to be saved/restored by
the hypervisor. This is in case the hypervisor hueristics do not do
the right thing.
Add this parameter to the set saved during domain save/migrate.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
All branches need to #GP when their target violates the segment limit
(in 16- and 32-bit modes) or is non-canonical (in 64-bit mode). For
near branches facilitate this via a zero-byte instruction fetch from
the target address (resulting in address translation and validation
without an actual read from memory), while far branches get dealt with
by breaking up the segment register loading into a read-and-validate
part and a write one. The latter at once allows correcting some
ordering issues in how the individual emulation steps get carried out:
Before updating machine state, all exceptions unrelated to that state
updating should have got raised (i.e. the only ones possibly resulting
in partly updated state are faulting memory writes [pushes]).
Note that while not immediately needed here, write and distinct read
emulation routines get updated to deal with zero byte accesses too, for
overall consistency.
Reported-by: 刘令 <liuling-it@360.cn>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
This patch adds pkeys support for cpuid handing.
Pkeys hardware support is CPUID.7.0.ECX[3]:PKU. software support is
CPUID.7.0.ECX[4]:OSPKE and it reflects the support setting of CR4.PKE.
X86_FEATURE_OSXSAVE depends on guest X86_FEATURE_XSAVE, but cpu_has_xsave
function reflects hypervisor X86_FEATURE_XSAVE, it is fixed too.
Signed-off-by: Huaitong Han <huaitong.han@intel.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
1) EXIT_REASON_EXCEPTION_NMI is 0, and Clang complains:
xenalyze.c:513:33: error: initializer overrides prior initialization of this subobject [-Werror,-Winitializer-overrides]
[EXIT_REASON_EXCEPTION_NMI]="EXCEPTION_NMI",
^~~~~~~~~~~~~~~
xenalyze.c:512:11: note: previous initialization is here
[0] = "NONE",
^~~~~~
2) cr3_time_compare(), eip_compare(), ipi_send() and cr3_compare_start() are
declared as nested functions, which is a GCCism not supported by Clang.
As they don't actually make use of the interesting feature offered by
nested functions (i.e. dynamic scoping), move them to just being normal
functions.
3) clear_interval_summary(), update_cpi() and clear_interval_cpi() are all
unused. The former isn't reference anywhere, so is deleted, while the other
two are called from currently #if 0'd code.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Since xch may not be valid (enough) any longer, xc_interface_close
already logs anything of any use before it tears down the integrated
logger so there is no need to log any further in the application via
that path.
CID: 1056203
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
After "Drop unused functions do_cstate and single_cstate helper" make
all the remaining functions and global data static and in the process
allow the compiler to notice that cond_rec_init() is also unused, thus
remove it.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
These have always been dead code since the code was added AFAICT.
This eliminates the code containing CID 10567079, 10567080, 10567081
and 10567082 (all apparently some confusion between max_cx_num vs
MAX_CX_NR, but given the lack of callers its hard to tell what was
intended)
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Doug Goldstein
Wei Liu
Andrew Cooper
Dario Faggioli
Liang Li
Ian Campbell
George Dunlap
Wen Congyang
David Vrabel
Jan Beulich
Huaitong Han
Ian Jackson
Roger Pau Monné