The num_disks field can change during guest lifetime. Don't use that as
the size of diskws, use a dedicated counter instead.
Also free diskws and reset diskws to NULL after disabling events so that
it will be automatically re-created when the guest reboots.
Reported-by: Fatih Acar <fatih.acar@gandi.net>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Tested-by: Fatih Acar <fatih.acar@gandi.net>
libxl_domain_build_info_dispose is not resetting the type field to LIBXL_DOMAIN_TYPE_INVALID.
Instead, it is memseting the struct to 0 thus when libxl_domain_build_info_init_type is called
after a dispose on the same struct, an assertion is triggered because type != LIBXL_DOMAIN_TYPE_INVALID.
Calling libxl_domain_build_info_init makes sure the type field is correctly initialized.
Signed-off-by: Fatih Acar <fatih.acar@gandi.net>
Signed-off-by: Nikita Kozlov <nikita.kozlov@gandi.net>
Signed-off-by: Vincent Legout <vincent.legout@gandi.net>
Signed-off-by: Baptiste Daroussin <baptiste.daroussin@gandi.net>
Acked-by: Wei Liu <wei.liu2@citrix.com>
domid is normally represented by uint32_t, but many format
strings in xl_cmdimpl.c use %d when printing, which is signed.
Use %u instead to print the unsigned integer domid.
Signed-off-by: Ronald Rojas <ronladred@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Last part of the wiring necessary for allowing to
change the value of the ratelimit_us parameter online,
for Credit2 (like it is already for Credit1).
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since the existing configuration option "u.hvm.acpi" is x86 specific and
we want to reuse it on ARM as well, add a unified option "acpi" for
x86 and ARM, and for ARM it's disabled by default.
Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add HVM usb passthrough support to libxl by using qemu's capability
to emulate standard USB controllers.
A USB controller is added via qmp command to the emulated hardware
when a usbctrl device of type DEVICEMODEL is requested. Depending on
the requested speed the appropriate hardware type is selected. A host
USB device can then be added to the emulated USB controller via qmp
command.
Removing of the devices is done via qmp commands, too.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@citrix.com>
Add a new xl command "qemu-monitor-command" to issue arbitrary commands
to a domain's device model. Syntax is:
xl qemu-monitor-command <domain> <command>
The command is issued via qmp human-monitor-command command. Any
information returned by the command is printed to stdout.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The path to the BIOS blob can be overriden by the xl's
bios_path_override option, or provided by u.hvm.bios_firmware in the
domain_build_info struct by other libxl user.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
If user asks xl to automatically connect to console when creating a
guest, use the new startup protocol before trying to unpause domain so
that we don't lose any console output.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
libxl_set_memory_target() and several other interface functions of
libxl use a 32 bit sized parameter for a memory size value in kBytes.
This limits the maximum size to be passed in such a parameter
depending on signedness of the parameter to 2TB or 4TB.
Correct this by using 64 bit types.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
GCC 6 will warn on unused static const variables in c modules:
https://gcc.gnu.org/ml/gcc-patches/2015-09/msg00847.html
When compiling with LIBXL_HAVE_NO_SUSPEND_RESUME set (arm & aarch64),
the compiler emits the following errors:
xl_cmdimpl.c:101:19: error: 'migrate_report'
defined but not used [-Werror=unused-const-variable=]
xl_cmdimpl.c:99:19: error: 'migrate_permission_to_go'
defined but not used [-Werror=unused-const-variable=]
xl_cmdimpl.c:97:19: error: 'migrate_receiver_ready'
defined but not used [-Werror=unused-const-variable=]
xl_cmdimpl.c:95:19: error: 'migrate_receiver_banner'
defined but not used [-Werror=unused-const-variable=]
These unused const variables are only used in functions which exist between
the ifndef block:
#ifndef LIBXL_HAVE_NO_SUSPEND_RESUME
...
#endif
Wrap the same ifndef around these variables.
Signed-off-by: Chris Patterson <pattersonc@ainfosec.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Gcc 4.4.4 complained that the "pause" variable introduced in 22b430e0
("xl: add option to leave domain paused after migration") shadowed
pause(2) declaration in unistd.h.
Rename "pause" to "pause_after_migration" to fix this issue.
Reported-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This is useful for debugging domains that crash on resume from migration.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When scripting, it is much more convenient to use:
[root@fusebot ~]# xl info xen_version
4.8-unstable
than to construct some sed/awk/other to parse:
[root@fusebot ~]# xl info
...
xen_version : 4.8-unstable
...
This works by wrapping all printf() calls in main_info() with maybe_printf(),
which formats its arguments, compares the resulting string to the provided
restriction, and discards it if no match is found.
A restriction like this doesn't make sense in combination with --numa, so is
excluded in that case.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When trying to use xl cpupool-numa-split and dom0 is limited to less
vcpus than one numa node the operation will fail.
Correct this by allowing this configuration.
Reported-by: Glenn Enright <glenn@rimuhosting.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The original code is wrong because the common case is no HA enabled. It
should have been set to NULL first.
Instead of setting ha to NULL, move it to the scope where it is used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Functions libxl_tmem_freeze(), libxl_tmem_thaw(), libxl_tmem_set() and
libxl_tmem_shared_auth() located in libxl.c file return
ERROR_FAIL/ERROR_INVAL or internal error codes from libxc library
improve main_tmem_* return codes by returning EXIT_{SUCCESS/FAILURE}
accordingly to return codes of those functions.
Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
create_domain() is of uint32_t return type, because on
success it returns the domid of the new domain, and
uint32_t is what we typically use for domid-s.
However, on failure, it returns ERROR_FAIL or ERROR_INVAL,
which are -3 and -6. Callers assign the return value to an
'int rc' variable and then check for '(rc < 0)'.
Although things work, and no tool (compiler, Coverity, ecc.)
is complaining, using 'int' as return type seems better.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
by making them more consistent with other examples in xl.
Affected functions are the ones related to console, vnc,
dump, destroy, shutdown, list, domid and domname.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Dario Fagggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
by making them more consistent with other examples in xl.
While there, make freemem() of boolean return type, which
looks more natural, and add comment explaining why
parse_mem_size_kb() needs to diverge from the pattern.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add cmdline switches to 'xl migrate-receive' command to specify
a domain-specific hotplug script to setup COLO proxy.
Add a new config var 'colo.default.agentscript' to xl.conf, that
allows the user to override the default global script used to
setup COLO proxy.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a new option -c to the command 'xl remus'. If you want
to use COLO HA instead of Remus HA, please use -c option.
Update man pages to reflect the addition of a new option to
'xl remus' command.
Also add a new option --colo to the internal command 'xl migrate-receive'.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In COLO mode, secondary needs to send the following data to primary:
1. In libxl
Secondary sends the following CHECKPOINT_CONTEXT to primary:
CHECKPOINT_SVM_SUSPENDED, CHECKPOINT_SVM_READY and CHECKPOINT_SVM_RESUMED
2. In libxc
Secondary sends the dirty pfn list to primary
But the io_fd only can be written in primary, and only can be read in
secondary. Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state. Extend libxl_domain_create_restore API, add a
send_fd param to it. Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate
the API change.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
* 'pin' of https://github.com/jgross1/xen:
libxl: add force option for xl vcpu-pin
libxl: print message how to recover from xl cpupool-cpu-remove errors
libxc: do some retries in xc_cpupool_removecpu() for EBUSY case
All patches have Acked-by and Reviewed-by tags.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This makes xl more useful in scripts.
The strange thing about this is that the internal cd_insert function
*already* returned something appropriate, and cd-eject was using it,
but cd-insert wasn't.
Also:
* Rework cd_insert to return EXIT_FAILURE and EXIT_SUCCESS rather than
magic constants
* Use 'r' for non-libxl return code, as specified in CODING_STYLE
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also move the rc -> shell code translation into set_memory_max() to
make the two functions consistent with each other, and with other
similar examples in xl_cmdimpl.c
Change a 'long long' to "int64_t" while we're at it.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
An error occurring when calling "xl cpupool-cpu-remove" might leave
the system in a state where a cpu is neither completely free nor in
a cpupool. This can easily be repaired by adding the cpu via
"xl cpupool-cpu-add" to the cpupool where it was removed from before.
Print a message telling this the user in case of an error.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add pvusb commands: usbctrl-attach, usbctrl-detach, usb-list,
usbdev-attach and usbdev-detach.
To attach a usb device to guest through pvusb, one could follow
following example:
#xl usbctrl-attach test_vm version=1 ports=8
#xl usb-list test_vm
will show the usb controllers and port usage under the domain.
#xl usbdev-attach test_vm hostbus=1 hostaddr=2
will find the first usable controller:port, and attach usb
device whose busnum is 1 and devnum is 6.
One could also specify which <controller> and which <port>.
#xl usbdev-detach test_vm 0 1
will detach USB device under controller 0 port 1.
#xl usbctrl-detach test_vm dev_id
will destroy the controller with specified dev_id. Dev_id
can be traced in usb-list info.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add code to support pvusb in domain config file. One could specify
usbctrl and usb in domain's configuration file and create domain,
then usb controllers will be created and usb device would be attached
to guest automatically.
One could specify usb controllers and usb devices in config file
like this:
usbctrl=['version=2,ports=4', 'version=1, ports=4', ]
usbdev=['hostbus=2, hostaddr=1, controller=0,port=1', ]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The contents of /proc/uptime is typically something like "80164.57
640617.58", so the existing 512 byte buffer is more than large enoguh,
so reduce its effective size to 511 bytes and ensure we include a
NULL.
Otherwise Coverity points out that we pass a potentially unterminated
string to strtok. In practice this likely doesn't actually cause
issues (at least on Linux) because the
string should always contain a space so we will stop parsing.
CID: 105590
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Dom0 is handled separately (via print_dom0_uptime) and the domU
variant doesn't work for dom0 since libxl_vm_get_start_time() doesn't.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We assert that nullfd if not std{in,out,err} since that would result
in closing one of the just dup2'd fds. For this to happen
std{in,out,err} would have needed to be closed, at which point all
sorts of other things could go wrong.
CID: 1130519
It was previously hypothesised[0] that fixing 1130516 would solve this
too, but that appears to not have been the case.
Compile tested only.
[0] http://lists.xenproject.org/archives/html/xen-devel/2013-11/msg02931.html
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: andrew.cooper3@citrix.com
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce enum type libxl_checkpointed_stream in IDL.
rename the last argument of migrate_receive from "remus" to
"checkpointed" since the semantics of this parameter has
changed.
NOTE:
libxl_domain_restore_params and domain_create aren't changed here,
checkpointed_stream is still an int. Because we will pass the
value from libxl to libxc.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently the fd is opened and then later closed and
restore_fd_to_close set back to -1, however there are several goto out
and goto error_out paths in the interim.
Since the code resets restore_fd_to_close to -1 it is OK to check this
and close on the out path too.
CID: 1055897
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Using bare realloc risks leaking the old pointer if the realloc fails.
Since xrealloc exits on such failures, drop the error handling.
Noticed while fixing, but not related to, CID 1055898.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We don't need to free anything extra from Dom0 in order to perform soft
reset. It can also fail soft reset if it happens that we don't have this
memory (which we don't need) available.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When restarting or shutting down dom0 the xendomains script tries to
stop all other domains. Don't do this for the xenstore domain, as it
might survive a dom0 reboot in the future.
The same applies to xl shutdown --all. Here the xenstore domain is
flagged as "never stop".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Replace the firmware loaded into HVM guests with an OS kernel. Since the HVM
builder now uses the PV xc_dom_* set of functions this kernel will be parsed
and loaded inside the guest like on PV, but the container is a pure HVM
guest.
Also, if device_model_version is set to none or a device model for the
specified domain is not present unconditinally set the nic type to
LIBXL_NIC_TYPE_VIF.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Wei Liu
Fatih Acar
Ronald Rojas
Dario Faggioli
Shannon Zhao
Juergen Gross
Anthony PERARD
Chris Patterson
Roger Pau Monne
Andrew Cooper
Paulina Szubarczyk
Konrad Rzeszutek Wilk
Harmandeep Kaur
Chong Li
Wen Congyang
George Dunlap
Chunyan Liu
Ian Campbell
Vitaly Kuznetsov