Since they're being passed to Dom0 using an array of uint32_t, they
must be representable as 32-bit quantities, and hence the buffer
allocation must specify an upper address boundary.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
This patch fixes ia64 by the following method:
- rename xc_handle xch
- rename guest_xc xch
- add xc_interface *xch to arguments of some functions
- replace xc_dom_printf with macros
- Add *xch argument to corresponding x86 functions [iwj]
Signed-off-by: KUWAMURA Shin'ya <kuwa@jp.fujitsu.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
In changeset 21653,
dev_type = sxp.name(dev_config)
should not have been moved, otherwise, the checking "mac"
paragraph is of no use.
(The original patch as submitted was correct but I had to make the
change manually as it had been mangled.)
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Signed-off-by Chunyan Liu <CYLiu@novell.com>
Oxenstored should not try to create the evtchn device, as it:
* creates the wrong name (/dev/xen/eventchn rather than evtchn)
* uses a hard-coded minor number, even though this dynamically
depends on what other misc devices are in the kernel
Remove all this code and just rely on the system to create the device.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Recent kernels have a reset file on sysfs per PCI device, to allow PCI
device reset from userspace.
This patch adds support to libxl for resetting PCI devices using the
reset file on sysfs, in case the do_flr file is not preset.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
at the moment libxl_wait_for_device_model waits on a xenstore watch
before checking the current value of the xenstore node, that might
contain already the value the function was looking for.
This patch changes libxl_wait_for_device_model so that it checks the
value of the xenstore node first, then waits for the watch.
xenstore watch automatically fire one time when you install them for
this exact same purpose, so the previous code is not wrong, but this
version is clearer.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The flask library is small, and putting everything in libxenctrl make
relying on flask functionalities in libxl easier.
libflask is left for compatibility purpose, but should be considered
deprecated, and remove in the near future. all flask_ symbols are now
xc_flask_ symbols in libxenctrl.
Signed-off-by: Vincent Hanquez <vincent.hanquez@eu.citrix.com>
The flask library is small, and putting everything in libxenctrl make
relying on flask functionalities in libxl easier.
libflask is left for compatibility purpose, but should be considered
deprecated, and remove in the near future. all flask_ symbols are now
xc_flask_ symbols in libxenctrl.
Signed-off-by: Vincent Hanquez <vincent.hanquez@eu.citrix.com>
Fix the xencommons init script chkconfig configuration since the
priority was missing here and chkconfig was complaining about invalid
chkconfig script so I added both start and stop priorities to the
chkconfig line and it was working fine, the script was successfully
added to chkconfig when using `chkconfig --add xencommons` and
management using the chkconfig utility was now possible.
Tested on RHEL-5 Server with Xen-4.1-unstable installed, running on
PVops kernel 2.6.32.15 and it was working fine.
Signed-off-by: Michal Novotny <minovotn@redhat.com>
In XendDomainInfo.py device_create function, when device type is
"vif", it has a paragraph to check the validity of "mac"
address. Before checking validity, device_add has been done. But after
checking validity, if the mac address is invlid, it raises VmError and
exits directly without doing clean work like removing the device item
from config info. This will cause that the incorrect mac address is
saved into VM Config file and VM fails to restart. If check "mac"
validity before doing device_add, there will be no problem.
Signed-off-by Chunyan Liu <CYLiu@novell.com>
used as a replacement of xm in xendomains:
- dryrun and quiet, long options to xl create;
- l, option to xl list.
printf_info is now used to print the configuration of the running VMs so
the output has been reformatted to be similar to the output of xm list -l.
There is still one command used in xendomains that is not implemented in
xl and not covered by this patch: xm shutdown. However a patch has been
sent to the list in the past and we are expecting a new version of it
soon.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
must still be tmem-enabled to use this functionality (e.g.
won't work for Windows), but upstream Linux tmem (aka
cleancache and frontswap) patches apply cleanly on top
of PV on HVM patches.
Also, fix up some ASSERTS and code used only when bad guest
mfns are passed to tmem. Previous code could crash Xen
if a buggy/malicious guest passes bad gmfns.
Signed-off-by: Dan Magenheimer <dan.magenheimer@oracle.com>
This patch implements HVMOP_pagetable_dying: an hypercall for
guests to notify Xen that a pagetable is about to be destroyed so that
Xen can use it as a hint to unshadow the pagetable soon and unhook the
top-level user-mode shadow entries right away.
Gianluca Guida is the original author of this patch.
Signed-off-by: Gianluca Guida <glguida@gmail.com>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Fix the truncation code so that it always accepts an exact match,
even when one command is a prefix of another one. This fixes,
e.g., "xl list"
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
This is a minor fix to the calculation of bit-width of fixed function
perfmon counters in Intel processors. Bits 5-12 of edx register
should be calculated as (edx & 0x1fe0) >>5 instead of using 0x1f70.
From: "John, Jaiber J" <jaiber.j.john@intel.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
If a command hold domains_lock, "xm list" would hang for waiting for
the lock. Such as creating many VMs at a script (such as 20), command
of "xm list" could hang for long time(10 mins). I think domains_lock
here only protect update(). So, we shouldn't do update before command
of "list" really get this lock, but xm do need show the domain's
information quickly. In this patch, if command couldn't get the
domains_lock after 20 times trying, "xm list" would show the
information of VMs without update().
Signed-off-by: James Song (Wei) <jsong@novell.com>
If xenfs is compiled as a module, now cannot complete
'service xencommons start', modprobe xenfs can fix it.
Signed-off-by: Yu Zhiguo <yuzg@cn.fujitsu.com>
This is the patch for error reporting on ia64 that has a special
handling in comparison with i386/x86_64 platforms. This is pretty
straight-forward just to fail on "cannot map mfn page" message instead
of continue since the memory is not being correctly mapped using the
xc_map_foreign_range() function.
From: Michal Novotny <minovotn@redhat.com>
Signed-off-by: Keir Fraser <keir.fraser@citrix.com>
Separate the miscellaneous actions the dist: target does into its own
target so you can run them independently.
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
Keir Fraser
Ian Jackson
Stefano Stabellini