When trying to use xl cpupool-numa-split and dom0 is limited to less
vcpus than one numa node the operation will fail.
Correct this by allowing this configuration.
Reported-by: Glenn Enright <glenn@rimuhosting.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The original code is wrong because the common case is no HA enabled. It
should have been set to NULL first.
Instead of setting ha to NULL, move it to the scope where it is used.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Functions libxl_tmem_freeze(), libxl_tmem_thaw(), libxl_tmem_set() and
libxl_tmem_shared_auth() located in libxl.c file return
ERROR_FAIL/ERROR_INVAL or internal error codes from libxc library
improve main_tmem_* return codes by returning EXIT_{SUCCESS/FAILURE}
accordingly to return codes of those functions.
Signed-off-by: Paulina Szubarczyk <paulinaszubarczyk@gmail.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
create_domain() is of uint32_t return type, because on
success it returns the domid of the new domain, and
uint32_t is what we typically use for domid-s.
However, on failure, it returns ERROR_FAIL or ERROR_INVAL,
which are -3 and -6. Callers assign the return value to an
'int rc' variable and then check for '(rc < 0)'.
Although things work, and no tool (compiler, Coverity, ecc.)
is complaining, using 'int' as return type seems better.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
by making them more consistent with other examples in xl.
Affected functions are the ones related to console, vnc,
dump, destroy, shutdown, list, domid and domname.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Dario Fagggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
by making them more consistent with other examples in xl.
While there, make freemem() of boolean return type, which
looks more natural, and add comment explaining why
parse_mem_size_kb() needs to diverge from the pattern.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add cmdline switches to 'xl migrate-receive' command to specify
a domain-specific hotplug script to setup COLO proxy.
Add a new config var 'colo.default.agentscript' to xl.conf, that
allows the user to override the default global script used to
setup COLO proxy.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add a new option -c to the command 'xl remus'. If you want
to use COLO HA instead of Remus HA, please use -c option.
Update man pages to reflect the addition of a new option to
'xl remus' command.
Also add a new option --colo to the internal command 'xl migrate-receive'.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In COLO mode, secondary needs to send the following data to primary:
1. In libxl
Secondary sends the following CHECKPOINT_CONTEXT to primary:
CHECKPOINT_SVM_SUSPENDED, CHECKPOINT_SVM_READY and CHECKPOINT_SVM_RESUMED
2. In libxc
Secondary sends the dirty pfn list to primary
But the io_fd only can be written in primary, and only can be read in
secondary. Save recv_fd in domain_suspend_state, and send_fd in
domain_create_state. Extend libxl_domain_create_restore API, add a
send_fd param to it. Add LIBXL_HAVE_CREATE_RESTORE_SEND_FD to indicate
the API change.
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Changlong Xie <xiecl.fnst@cn.fujitsu.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
* 'pin' of https://github.com/jgross1/xen:
libxl: add force option for xl vcpu-pin
libxl: print message how to recover from xl cpupool-cpu-remove errors
libxc: do some retries in xc_cpupool_removecpu() for EBUSY case
All patches have Acked-by and Reviewed-by tags.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This makes xl more useful in scripts.
The strange thing about this is that the internal cd_insert function
*already* returned something appropriate, and cd-eject was using it,
but cd-insert wasn't.
Also:
* Rework cd_insert to return EXIT_FAILURE and EXIT_SUCCESS rather than
magic constants
* Use 'r' for non-libxl return code, as specified in CODING_STYLE
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Also move the rc -> shell code translation into set_memory_max() to
make the two functions consistent with each other, and with other
similar examples in xl_cmdimpl.c
Change a 'long long' to "int64_t" while we're at it.
Signed-off-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
An error occurring when calling "xl cpupool-cpu-remove" might leave
the system in a state where a cpu is neither completely free nor in
a cpupool. This can easily be repaired by adding the cpu via
"xl cpupool-cpu-add" to the cpupool where it was removed from before.
Print a message telling this the user in case of an error.
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Add pvusb commands: usbctrl-attach, usbctrl-detach, usb-list,
usbdev-attach and usbdev-detach.
To attach a usb device to guest through pvusb, one could follow
following example:
#xl usbctrl-attach test_vm version=1 ports=8
#xl usb-list test_vm
will show the usb controllers and port usage under the domain.
#xl usbdev-attach test_vm hostbus=1 hostaddr=2
will find the first usable controller:port, and attach usb
device whose busnum is 1 and devnum is 6.
One could also specify which <controller> and which <port>.
#xl usbdev-detach test_vm 0 1
will detach USB device under controller 0 port 1.
#xl usbctrl-detach test_vm dev_id
will destroy the controller with specified dev_id. Dev_id
can be traced in usb-list info.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Add code to support pvusb in domain config file. One could specify
usbctrl and usb in domain's configuration file and create domain,
then usb controllers will be created and usb device would be attached
to guest automatically.
One could specify usb controllers and usb devices in config file
like this:
usbctrl=['version=2,ports=4', 'version=1, ports=4', ]
usbdev=['hostbus=2, hostaddr=1, controller=0,port=1', ]
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Simon Cao <caobosimon@gmail.com>
Reviewed-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
The contents of /proc/uptime is typically something like "80164.57
640617.58", so the existing 512 byte buffer is more than large enoguh,
so reduce its effective size to 511 bytes and ensure we include a
NULL.
Otherwise Coverity points out that we pass a potentially unterminated
string to strtok. In practice this likely doesn't actually cause
issues (at least on Linux) because the
string should always contain a space so we will stop parsing.
CID: 105590
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Dom0 is handled separately (via print_dom0_uptime) and the domU
variant doesn't work for dom0 since libxl_vm_get_start_time() doesn't.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We assert that nullfd if not std{in,out,err} since that would result
in closing one of the just dup2'd fds. For this to happen
std{in,out,err} would have needed to be closed, at which point all
sorts of other things could go wrong.
CID: 1130519
It was previously hypothesised[0] that fixing 1130516 would solve this
too, but that appears to not have been the case.
Compile tested only.
[0] http://lists.xenproject.org/archives/html/xen-devel/2013-11/msg02931.html
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Cc: andrew.cooper3@citrix.com
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Introduce enum type libxl_checkpointed_stream in IDL.
rename the last argument of migrate_receive from "remus" to
"checkpointed" since the semantics of this parameter has
changed.
NOTE:
libxl_domain_restore_params and domain_create aren't changed here,
checkpointed_stream is still an int. Because we will pass the
value from libxl to libxc.
Signed-off-by: Yang Hongyang <hongyang.yang@easystack.cn>
Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Currently the fd is opened and then later closed and
restore_fd_to_close set back to -1, however there are several goto out
and goto error_out paths in the interim.
Since the code resets restore_fd_to_close to -1 it is OK to check this
and close on the out path too.
CID: 1055897
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Using bare realloc risks leaking the old pointer if the realloc fails.
Since xrealloc exits on such failures, drop the error handling.
Noticed while fixing, but not related to, CID 1055898.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
We don't need to free anything extra from Dom0 in order to perform soft
reset. It can also fail soft reset if it happens that we don't have this
memory (which we don't need) available.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When restarting or shutting down dom0 the xendomains script tries to
stop all other domains. Don't do this for the xenstore domain, as it
might survive a dom0 reboot in the future.
The same applies to xl shutdown --all. Here the xenstore domain is
flagged as "never stop".
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Replace the firmware loaded into HVM guests with an OS kernel. Since the HVM
builder now uses the PV xc_dom_* set of functions this kernel will be parsed
and loaded inside the guest like on PV, but the container is a pure HVM
guest.
Also, if device_model_version is set to none or a device model for the
specified domain is not present unconditinally set the nic type to
LIBXL_NIC_TYPE_VIF.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Try to use "xen-qemuuser-domid$domid" first, then
"xen-qemuuser-shared" and root if everything else fails.
The uids need to be manually created by the user or, more likely, by the
xen package maintainer.
Expose a device_model_user setting in libxl_domain_build_info, so that
opinionated callers, such as libvirt, can set any user they like. Do not
fall back to root if device_model_user is set. Users can also set
device_model_user by hand in the xl domain config file.
QEMU is going to setuid and setgid to the user ID and the group ID of
the specified user, soon after initialization, before starting to deal
with any guest IO.
To actually secure QEMU when running in Dom0, we need at least to
deprivilege the privcmd and xenstore interfaces, this is just the first
step in that direction.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In fact, right now, failing at destroying a cpupool is just
not reported to the user in any explicit way.
Let's log an error, as it is customary for xl in these cases.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Rearange the case when we check the new number of vCPUs
against the number of host pCPUs not to use rc for internal
error reporting. In fact:
- rc was at risk of being used uninitialised;
- rc should only be used for holding libxl error codes.
Signed-off-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
In 5b725e56 (xl: improve return and exit codes of vcpu related
functions), the return value of libxl_cpu_bitmap_alloc was not stored in
rc anymore. Yet the subsequent fprintf still used that.
Reinstate the original implementation, that is, to store return value of
libxl_cpu_bitmap_alloc in rc before using rc.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Turning parsing related functions exit codes towards using the
EXIT_[SUCCESS|FAILURE] constants, instead of instead of arbitrary numbers
or libxl return codes.
- for main_*: arbitrary -> EXIT_SUCCESS|EXIT_FAILURE.
- for internal fucntion: arbitrary -> 0/1.
Don't touch parse_config_data() which is big enough to deserve its own patch.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Turning cpupools related functions exit codes towards using the
EXIT_[SUCCESS|FAILURE] constants, instead of instead of arbitrary numbers
or libxl return codes.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Turning scheduling related functions exit codes towards using the
EXIT_[SUCCESS|FAILURE] constants, instead of instead of arbitrary numbers
or libxl return codes.
- for main_*: arbitrary -> EXIT_SUCCESS|EXIT_FAILURE.
- for internal fucntion: arbitrary -> 0/1.
Signed-off-by: Harmandeep Kaur <write.harmandeep@gmail.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
def_getopt would print a message to stderr, but blunder on anyway.
Sadly this is probably not a backport candidate.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This is the xl/xc changes to support Intel Code/Data Prioritization.
CAT xl commands to set/get CBMs are extended to support CDP.
Add new CDP options with CAT commands in xl interface man page.
Add description of CDP in xl-psr.markdown.
Signed-off-by: He Chen <he.chen@linux.intel.com>
Reviewed-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The entries returned from libxl_psr_cat_get_l3_info are assumed
to be socket-continuous. But this is not true in the hotplug case.
This patch gets the socket bitmap for all the sockets on the system
first and stores the socket id in the structure libxl_psr_cat_info in
libxl_psr_cat_get_l3_info. The xl or similar consumers then can display
socket information correctly.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
When displaying the CMT information for all the sockets, we assume socket
number is continuous. This is not true in the hotplug case. For instance,
when the 3rd socket is plugged out on a 4-socket system, the available
sockets numbers are 1,2,4 but current we will display the CMT
information for socket 1,2,3.
The fix is getting the socket bitmap for all the sockets on the system
first and then displaying CMT information for_each_set_bit in that bitmap.
Signed-off-by: Chao Peng <chao.p.peng@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Dario Faggioli <dario.faggioli@citrix.com>
Although we already have 'gfx_passthru' in b_info, this doesn't suffice
after we want to handle IGD specifically. Now we define a new field of
type, gfx_passthru_kind, to indicate we're trying to pass IGD. Actually
this means we can benefit this to support other specific devices just
by extending gfx_passthru_kind. And then we can cooperate with
gfx_passthru to address IGD cases as follows:
gfx_passthru = 0 => sets build_info.u.gfx_passthru to false
gfx_passthru = 1 => sets build_info.u.gfx_passthru to true and
build_info.u.gfx_passthru_kind to DEFAULT
gfx_passthru = "igd" => sets build_info.u.gfx_passthru to true
and build_info.u.gfx_passthru_kind to IGD
Here if gfx_passthru_kind = DEFAULT, we will call
libxl__is_igd_vga_passthru() to check if we're hitting that table to need
to pass that option to qemu. But if gfx_passthru_kind = "igd" we always
force to pass that.
And "-gfx_passthru" is just introduced to work for qemu-xen-traditional
so we should get this away from libxl__build_device_model_args_new() in
the case of qemu upstream.
Signed-off-by: Tiejun Chen <tiejun.chen@intel.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Use existing create/restore path to perform 'soft reset' for HVM
domains. Tear everything down, e.g. destroy domain's device model,
remove the domain from xenstore, save toolstack record and start
over.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Juergen Gross
Wei Liu
Paulina Szubarczyk
Konrad Rzeszutek Wilk
Roger Pau Monne
Dario Faggioli
Harmandeep Kaur
Chong Li
Wen Congyang
George Dunlap
Chunyan Liu
Ian Campbell
Vitaly Kuznetsov
Stefano Stabellini
Ian Jackson
He Chen
Chao Peng
Tiejun Chen