At the moment, Xen provides virtual PSCI interface compliant with 0.1
and 0.2. Since them, the specification has been updated and the latest
version is 1.1 (see ARM DEN 0022D).
>From an implementation point of view, only PSCI_FEATURES is mandatory.
The rest is optional and can be left unimplemented for now.
At the same time, the compatible for PSCI node have been updated to
expose "arm,psci-1.0".
Signed-off-by: Julien Grall <julien.grall@arm.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: mirela.simonovic@aggios.com
There's no need to have shim specific targets, so just use the regular
xen makefile targets in order to build the shim binary.
When the shim is build as part of the firmware directory install the
stripped Xen binary to the firmware directory and place a binary with
symbols in the debug directory.
The objcopy step of the shim build is also removed in this patch:
since the shim is booted in PVH mode there's no need for the resulting
binary to be in elf32 format. Xen can load PVH kernels with either a
32 or 64bit elf header.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
With gcc 7.3.0, the build fails like this:
src/xenstat_linux.c: In function ‘getBridge’
src/xenstat_linux.c:78:34: warning: ‘%s’ directive writing up to 255 bytes into a region of size 241 [-Wformat-overflow=]
sprintf(tmp, "/sys/class/net/%s/bridge", de->d_name);
^~
src/xenstat_linux.c:78:5: note: ‘sprintf’ output between 23 and 278 bytes into a destination of size 256
sprintf(tmp, "/sys/class/net/%s/bridge", de->d_name);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix by making the buffer bigger.
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
"mkdir -p" reports a missing operand, as config/ has no subdirs. Oddly
enough this doesn't cause the whole command (and hence the build to
fail), despite the "set -e" now covering the entire set of commands -
perhaps a quirk of the relatively old bash I've seen this with (a few
simple experiments suggest that commands inside () producing a non-
success status would exit the inner shell, but not the outer one).
Add a dummy . argument to the invocation.
Suggested-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
"set -e" on a separate Makefile line is meaningless. Glue together all
the lines that this is supposed to cover.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
The "special pages" for PVH guests include the frames for console and
Xenstore ring buffers. Those have to be marked as "Reserved" in the
guest's E820 map, as otherwise conflicts might arise later e.g. when
hotplugging memory into the guest.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Commit 96edb111dd ("libxc: panic when trying to create a PVH guest
without kernel support") already improved the handling of non PVH
capable kernels. But xc_dom_parse_elf_kernel() still returned success on
invalid elf images and the domain build only failed later. Now the build
process will fail immediately on detecting the error.
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
xc_dom_parse_image() does not set errno (at least in many code paths).
So LOGE() is not useful.
Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Changed the error message when trying to map a null size file.
When doing `xl create` command, we get an Invalid Kernel error
when the file size is greater than zero. For zero length files, we are
falling in the mmap error, and we get an `Invalid parameter` error,
which is not explicit. With this change, we get a `zero length file`
error.
Signed-off-by: Paul Semel <semelpaul@gmail.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
To stay in line with other parts of the ocaml code base.
This requires committing a bunch of mli files in tree.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
So it can be used by both gcc and clang. Just add the Kconfig option
and modify the makefiles so the llvm coverage specific code can be
added in a follow up patch.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
[jb: also change the shim config]
The ocaml safe-strings patch uses code introduced in ocaml 4.02
so update the minimal version.
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Xen built with ocaml 4.06 gives errors such as
Error: This expression has type bytes but an expression was
expected of type string
as Byte and safe-strings which were introduced in 4.02 are the
default in 4.06.
This patch which is mostly by Richard W.M. Jones of Red Hat
from https://bugzilla.redhat.com/show_bug.cgi?id=1526703
fixes these issues.
v2: drop tools/ocaml/libs/xc/xenctrl.ml from the patch as the
affected code was removed by commit d933f1a53c
tools/ocaml: Drop coredump infrastructure
Signed-off-by: Michael Young <m.a.young@durham.ac.uk>
Reviewed-by: Christian Lindig <christian.lindig@citrix.com>
[ wei: remove trailing whitespaces ]
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
This is for the proposal "Allow setting up shared memory areas between VMs
from xl config file". See:
https://lists.xen.org/archives/html/xen-devel/2017-08/msg03242.html
Then plan is to use XENMEM_add_to_physmap_batch to map the shared pages from
one domU to another and use XENMEM_remove_from_physmap to cancel the sharing.
A wrapper to XENMEM_add_to_physmap_batch was added in the following commit:
commit 20e725e936
Now add the wrapper to XENMEM_remove_from_physmap.
Signed-off-by: Zhongze Liu <blackskygg@gmail.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On exit, xen-access did not unsubscribe from CR4 write vm_events,
potentially leaving the guest stuck.
Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
Acked-by: Tamas K Lengyel <tamas@tklengyel.com>
At least Linux kernels have been able to work with gzip-ed initrd for
quite some time; initrd compressed with other methods aren't even being
attempted to unpack. Furthermore the unzip-ing routine used here isn't
capable of dealing with various forms of concatenated files, each of
which was gzip-ed separately (it is this particular case which has been
the source of observed VM creation failures).
Hence, if unpacking fails, simply hand the compressed blob to the guest
as is.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
I'm in the process of putting together a gas change issuing at least
warnings when the intended size of a memory operation can't be deduced
from another (register) operand. Add missing suffixes to silence such
future diagnostics.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Note that this avoids emulating the behavior of VCVTPS2PH found on at
least some Intel CPUs, which update MXCSR even when the memory write
faults.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
xl: libxl.c:339: libxl_defbool_val: Assertion `!libxl_defbool_is_default(db)' failed.
This happens because initiate_domain_create() checks for type != HVM, then
pokes at the hvm union. Check for == HVM instead so the union access is
correctly guarded.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
c/s 4ddf474e2 "tools/xen-mceinj: Pass in GPA when injecting through
MSR_MCI_ADDR" removed the remaining user of hypercall.
It has been listed as broken, deprecated and wont-fix since XSA-74, so take
this opportunity to remove it completely.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Intel specifies IBRS/IBPB (combined, in a single bit) and STIBP as a separate
bit. AMD specifies IBPB alone in a 3rd bit.
AMD's IBPB is a subset of Intel's combined IBRS/IBPB. For performance
reasons, administrators might wish to express "IBPB only" even on Intel
hardware, so we allow the AMD bit to be used for this purpose.
The behaviour of STIBP is more complicated.
It is our current understanding that STIBP will be advertised on HT-capable
hardware irrespective of whether HT is enabled, but not advertised on
HT-incapable hardware. However, for ease of virtualisation, STIBP's
functionality is ignored rather than reserved by microcode/hardware on
HT-incapable hardware.
For guest safety, we treat STIBP as special, always override the toolstack
choice, and always advertise STIBP if IBRS is available. This removes the
corner case where STIBP is not advertised, but the guest is running on
HT-capable hardware where it does matter.
Finally as a bugfix, update the libxc CPUID logic to understand the e8b
feature leaf, which has the side effect of also offering CLZERO to guests on
applicable hardware.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
We generally support old config formats indefinintely (see the disk
format) without emitting warnings.
Signed-off-by: George Dunlap <george.dunlap@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
LIBXL_DEFINE_DEVICE_FROM_TYPE uses libxl__..._devtype.type to
be assigned as device and backend type.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
On adding to XS name of device is taken from
libxl__device_kind enum. On getting device from XS
the name is hardcoded. It leads to potential
mistmatch errors. The patch is using libxl__device_kind
everywere to have one source of device name.
Signed-off-by: Oleksandr Grytsov <oleksandr_grytsov@epam.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Remove the implementation of XEN_DOMCTL_pin_mem_cacheattr since it has
been replaced by a dmop. Change xc_domain_pin_memory_cacheattr() so
that it is only defined when XC_WANT_COMPAT_DEVICEMODEL_API is set and
have it call the new dmop. Leave the definitions of
XEN_DOMCTL_MEM_CACHEATTR_* since they are still used by QEMU.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Remove sched=null from shim cmdline and doc
We use the default scheduler (credit1 as of writing). The NULL
scheduler still has bugs to fix.
Update shim.config.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Kconfig has
bool "VGA support" if !PV_SHIM_EXCLUSIVE
so for the shim build VGA option doesn't exist.
This avoids having shim.config changed every time the shim is built.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The recent commit 66bf4ef0 "x86/hvm: re-work viridian APIC assist code"
modified one of the field names in struct hvm_viridian_vcpu_context but
did not accordingly modify xen-hvmctx, leading to a failure to build tools.
This patch makes the necessary change to fix the build.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements new generic set value interfaces in libxc and libxl.
These interfaces are suitable for all allocation features. It also adds a
new MBA set value command in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements generic get value interfaces in libxc and libxl.
It also refactors the get value flow in xl to make it be suitable for all
allocation features. Based on that, a new MBA get value command is added in xl.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch implements a new xl get HW info interface. A new argument
is added for psr-hwinfo command to get and show MBA HW info.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
This patch implements the new libxl get hw info interface,
'libxl_psr_get_hw_info', which is suitable to all psr allocation
features. It also implements corresponding list free function,
'libxl_psr_hw_info_list_free' and makes 'libxl_psr_cat_get_info' call
'libxl_psr_get_hw_info' to avoid redundant code in libxl_psr.c.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Julien Grall
Roger Pau Monné
Dario Faggioli
Jan Beulich
Juergen Gross
Simon Gaiser
Paul Semel
Wei Liu
Michael Young
Zhongze Liu
Razvan Cojocaru
Andrew Cooper
George Dunlap
Oleksandr Grytsov
Ross Lagerwall
Paul Durrant
Yi Sun