issues needed to be resolved by executing certain code early/later
Restore the physical to machine array such that balloon-allocated
pages can be deallocated.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
by using paging levels>=3 rather than ifdef i386. This patch fixes
the "black screen" hang issue when building w/XEN_TARGET_X86_PAE=y on
32bit.
Tested linux debian and win2003EE guests with pae=1. The linux
guest boots without error, while the windows guest sometimes hits a
bug() in shadow.c. Both VT and SVM encounter the same bug.
Signed-off-by: Tom Woller <thomas.woller@amd.com>
having the potential of missing synchronization there,
as I suspect exists in native Linux) is not needed with the hypercall
approach. In the hypervisor, the patch adds the
needed synchronization.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
modules. Most people's initrd-building tools will not know
about these drivers so it will only cause confusion not to
include them in the kernel core image.
Signed-off-by: Keir Fraser <keir@xensource.com>
set console.limit command in the test was never being run. The select in
Console.py was never timing out because there was always someting to read on
the fd, the OOM messages are constant. So the test would hang.
The fix includes:
1) Changing MEM in 15_create_smallmem_pos.py to 32MBs, which is the default
for the tools that should work.
2) Change the XmConsole init to add an argument to set the console limit
when it's created.
3) Set a default large limit for console so we won't hang in the future.
4) Added a new 16_create_smallmem_neg.py test to handle failure situation.
5) Added comment in README.
Signed-off-by: Daniel Stekloff <dsteklof@us.ibm.com>
physical RAM to first 1GB of physical RAM. This allows x86_64 xen to boot
larger dom0 images. Without this changes large dom0 images fail to
boot with "Unknown interrupt" on xen console and wedge.
Signed-off-by: Todd Clayton <todd.clayton@sun.com>
guest is being debugged. The differences are handling of int3 exception
and missed pit timer injections. The Xen hypervisor should get back to
the normal mode when the gdb connection is closed. With the attached
patch gdbserver properly detaches from the guest when the gdb detaches
or quits.
Signed-Off-By: Nitin A Kamble <nitin.a.kamble@intel.com>
use that saved value when handling the reply. Xenstored will leave the
message type intact, _except_ when returning an error, in which case it will
change the type to XS_ERROR. This meant that we failed to remove a
transaction from our internal list if xenstored returned EAGAIN, as we did not
realise that the message was XS_TRANSACTION_END. This manifested itself as
the intended behaviour until the connection was closed, at which point all of
those failed transactions would erroneously be aborted.
Signed-off-by: Ewan Mellor <ewan@xensource.com>
were:
1. Some critical Xen interrupts could get blocked behind
unacknowledged guest interrupts. This is avoided by making
all Xen-bound interrrupts strictly higher priority.
2. Interrupts must not only be EOIed on the CPU that received
them, but also in reverse order when interrupts are nested.
A whole load of logic has been added to ensure this.
There are two boot parameters relating to all this:
'ioapic_ack=old' -- use the old IO-APIC ACK method
'ioapic_ack=new' -- use the new IO-APIC ACK method (default)
'force_intack' -- periodically force acknowledgement of
interrupts (default is no; useful for debugging)
Signed-off-by: Keir Fraser <keir@xensource.com>
feature for PCI devices. It provides some examples (mostly stolen from
the e-mail which accompanied the late-binding patch) of how to use the
sysfs attributes for late binding.
This patch was revised from the last documentation patch that I
submitted which included this and some documentation on the permissive
flag. I've divided the two sections up and I'd like this one considered
for acceptance now while I revise the permissive flag code.
Signed-off-by: Ryan Wilson <hap9@epoch.ncsc.mil>
what has been currently allocated to the domain causing the kernel to
crash. This patch validates the value passed in and prevents setting the
value below the current allocation level.
Signed-off-by: ksrinivasan@novell.com
drive image or a TPM, to be migrated to a remote machine. The patch
hooks into the checkpointing (XendCheckpoint.py) code and performs
migration in 4 different steps:
In a 1st step (step = 0 in the code) migration of all devices of a
domain is 'tested', that means their driver implementations (blkif.py,
netif.py, tpmif.py, usbif.py, pciif.py) are queried whether migration is
possible at all. Currently all device representations respond with a
'yes' (=0), although probably a VM mounting a hard drive partition
should respond with a 'no' (-1) already. This first step is a quick
check to see whether devices can be migrated.
The 2nd step is to do whatever can be done before the domain is
suspended. At this point migration of the device could be initiated, if
at all possible.
The 3rd step is to migrate a device after the domain has been suspended,
meaning that it is not scheduled anymore and the VM is 'settled'. All
devices are called again and a good implementation would initiate the
migration in a background process to achieve as much concurrency as
possible.
The 4th step is to synchronize with the 3rd step. At this point the
implementor has to make sure that anything that was initiated in step 3
has completed. Once all steps 4 have been processed, the VM will resume
on the remove machine.
I have implemented hooks for migration of a virtual TPM in
xen/xend/server/tpmif.py. These hooks call a configurable external
migration tool using the os.popen() call with a fixed command line
parameter set. The implementation refuses to migrate a VM attached to a
virtual TPM if no tool has been provided for migration.
All other devices do not currently overload the 'migrate' method defined
in the DevController.py and therefore will just let migration happen.
I have added hooks for error recovery such that whatever part of
migration has been initiated can be rolled back when any of the devices
fail to migrate in one of the steps. The interface (in tpmif.py) to the
external application now uses os.popen() to allow error handling by
reading the application's output.
Signed-off-by: Stefan Berger <stefanb@us.ibm.com>
removed tight encoding of flag and ref. This change is xen-internal
so this shouldn't affect domain api.
Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
checksum calculation gets done twice, which is not twice as good as
once.
With this patch, TCP/UDP checksum errors from dom0 are fixed, and
domUs can use TCP/UDP without turning off TX checksum offload. Normal
non-VLAN bridged configs still work fine, tested with xm-test.
Signed-off-by: Jim Dykman <dykman@us.ibm.com>
The primary purpose of this patch is to add support for non-polling
access to the xen trace buffers. The hypervisor changes have already
been accepted.
Also included are a few bug fixes and some minor new features:
1. If xenmon is run without first allocating trace buffers (via
'setsize') and enabling them (via 'tbctl'), then this is done
automatically using sensible defaults.
2. There was a bug that caused the first second's worth of data output
from xenmon to be erroneous; This has been fixed.
3. There was a bug that caused xenmon to sometimes not display data for
newly created domains; This has also been fixed.
4. The xenmon display has a 'heartbeat' which flickers once per second.
This is to show that xenmon is still alive, even though the display
isn't changing at all, a situation that can happen sometimes when there
is nothing at all happening on a particular cpu.
5. Added cpu utilization display to the top of the xenmon window.
6. Added a bunch of options in xenmon to control exactly which metrics
are displayed, so the screen doesn't get cluttered with stuff you're not
interested in. The new options are:
--allocated
--noallocated
--blocked
--noblocked
--waited
--nowaited
--excount
--noexcount
--iocount
--noiocount
7. Added an option ("--cpu=N") to xenmon to specify which physical cpu
you'd like data displayed for.
8. Updated the README with information about default trace buffer size, etc.
Signed-off-by: Rob Gardner <rob.gardner@hp.com>
is specified on the make command line, e.g.:
make XEN_TARGET_ARCH=x86_64
This busted the vmxassist and hvmloader builds, which must
be done -m32. Using "override" in the vmxassist/hvmloader
Makefiles fixes the problem by not allowing this to be
overridden from the command line.
Signed-off-by: Dave Lively <dlively@virtualiron.com>
(e.g., Dell 1850). Disable it by default for now, but allow the
new mwethod to be tested by passing boot parameter 'new_ack'
to Xen.
You can tell which ACK method you are using because Xen prints
out "Using old ACK method" or "Using new ACK method" during boot.
This workaround can be removed if/when the problems with the new
ACK method are flushed out.
Signed-off-by: Keir Fraser <keir@xensource.com>
(apparently broken) IO-APIC hardware:
1. Do not mask/unmask the IO-APIC pin during normal ISR
processing. This seems to have really bizarre side effects
on some chipsets.
2. Since we instead tickle the local APIC in the ->end
irq hook function, it *must* run on the CPU that
received the interrupt. Therefore we track which CPUs
need to do final acknowledgement and IPI them if
necessary to do so.
Signed-off-by: Keir Fraser <keir@xensource.com>
