Commit the flex output into revision control, for the benefit of those
without flex or with only very old flex. This change is split into a
separate patch for ease of review. Generated with flex 2.5.35-6 on
Debian lenny i386, by running "make" in the libxl directory. No
manual changes in this commit.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Introduce new flex/regexp-based parser for disk configuration strings.
Callers will be updated in following patches.
The existing xm command line syntax for block-attach expects multiple
arguments containing different parameters for different parts of the
disk specification, so we supply a parser function which can take
multiple strings and scan them in sequence.
Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
libxl callers should not be required to specify the backend if they
don't want to. So LIBXL_DISK_BACKEND_UNKNOWN should instruct libxl to
choose the backend for itself.
For now, we do this by simply treating it the same as BACKEND_TAP,
which itself falls back to other methods.
More thorough fixes for the disk handling will follow.
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <Ian.Jackson@eu.citrix.com>
It's not clear this is needed - Linux doesn't use the MPS table even
if available, and no system having one was seen so far.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
This allows Dom0 access to all suitable EFI runtime services. The
actual calls into EFI are done in "physical" mode, as entering virtual
mode has been determined to be incompatible with kexec (EFI's
SetVirtualAddressMap() can be called only once, and hence the
secondary kernel can't establish its mappings). ("Physical" mode here
being quoted because this is a mode with paging enabled [otherwise
64-bit mode wouldn't work] but all mappings being 1:1.)
Open issue (not preventing this from being committed imo):
Page (and perhaps other) faults occuring while calling runtime
functions in the context of a hypercall don't get handled correctly
(they don't even seem to reach do_page_fault()). I'm intending to
investigate this further.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Besides introducing the relevant code paralleling parts of what is
under xen/arch/x86/boot/, this adjusts the build logic so that with a
single compilation two images (gzip-compressed ELF and EFI
application)
can get created. The EFI part of this depends on a new enough compiler
(supposedly gcc 4.4.x and above, but so far only tested to work with
4.5.x) and a properly configured linker (must support the i386pep
emulation). If either functionality is found to not be available, the
EFI part of the build will simply be skipped.
The patch adds all code to allow Xen and the (accordingly enabled)
Dom0 kernel to boot, but doesn't allow Dom0 to make use of EFI
runtime calls (this will be the subject of the next patch).
Parts of the code were lifted from an earlier never published OS
project of ours - whether respective license information needs to be
added to the respective source file is unclear to me (I was told
internally that adding a GPLv2 license header can be done if needed by
the community).
Open issues (not preventing this from being committed imo):
The trampoline allocation and initialization isn't really nice. This
is due to the trampoline needing to be placed at a fixed address, and
hence making the trampoline relocatable would seem desirable here (as
well as for BIOS-based booting, where the trampoline location needed
to be adjusted a number of time already in the past, due to it
colliding with firmware data).
By excluding mem.S, edd.S, and video.S from copied trampoline (i.e.
moving up wakeup.S? and making sure none of the symbols are used from
EFI code), the effective trampoline size could at least be reduced.
Should the mappings of [__XEN_VIRT_START, mbi.mem_upper) and
[_end, __XEN_VIRT_START+BOOTSTRAP_MAP_BASE) be destroyed, despite
non-EFI code also keeping them?
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Since the perf counter that the LAPIC NMI watchdog uses only
runs while the core isn't halted, and all APs are idle at
this point in the boot process, it's possible that remote
CPUs won't see any NMIs during the 10-tick waiting period.
Force all CPUs to busy-wait so we know the timers are running.
Signed-off-by: Tim Deegan <Tim.Deegan@citrix.com>
This patch is to support core-pair topology introduced by AMD CPUs,
which introduces a new concept of [core, compute unit]. There is a new
feature bit for topology extension in CPUID:0x80000001. Also a new
CPUID 0x8000001E is introduced for CPU topology enumeration. This
patch collects the sibling information from the new CPUID and will be
stored in the sibling map in Xen hypervisor.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
This patch moves cpu_core_id and phys_proc_id into cpuinfo_x86
structure. This is similar to upstream Linux kernel's approach.
Signed-off-by: Wei Huang <wei.huang2@amd.com>
The flask_tbufcontrol hook currently calls domain_has_xen with the
second argument being a class (SECCLASS_XEN) instead of a permission.
This patch fixes the hook so that it passes the XEN__TBUFCONTROL
permission instead.
Signed-off-by: James Carter <jwcart2@tycho.nsa.gov>
Cleanup frontend and backend devices from xenstore for all dev types - not only
disks. Because backend cleanup moved to libxl__device_destroy,
libxl__devices_destroy is somehow simpler.
Signed-off-by: Marek Marczykowski <marmarek@mimuw.edu.pl>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Memory for strings in libxl_device_disk must be allocated from outside of
libxl__gc to not be freed at the end of function (by libxl__free_all).
Fixes xl block-detach
Signed-off-by: Marek Marczykowski <marmarek@mimuw.edu.pl>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
'script=' length was wrong... Replaced calls to strncmp("param", *argv,
explicit sizeof("param")) with macro and helper function to extract parameter
value. Also introduce replace_string function to simplify code.
Signed-off-by: Marek Marczykowski <marmarek@mimuw.edu.pl>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
At once, move the common (between 32- and 64-bit) definition of
machine_to_phys_mapping_valid to a common location.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Besides being (in my eyes) desirable cleanup, this at once represents
another prerequisite for native EFI booting support.
Signed-off-by: Jan Beulich <jbeulich@novell.com>
Rather than being able to decompress only the payloads of bzImage
containers, extend the logic to also decompress simple compressed ELF
images. At once, allow uncompressed bzImage payloads.
This is a prerequisite for native EFI booting support (where, in the
absence of a capable secondary boot loader, the image will always be
in compressed form).
Signed-off-by: Jan Beulich <jbeulich@novell.com>
With this it is questionable whether retaining struct domain's
nr_pirqs is actually necessary - the value now only serves for bounds
checking, and this boundary could easily be nr_irqs.
Note that ia64, the build of which is broken currently anyway, is only
being partially fixed up.
v2: adjustments for split setup/teardown of translation data
v3: re-sync with radix tree implementation changes
Signed-off-by: Jan Beulich <jbeulich@novell.com>
The generated strings are the lower case enum value names, with underscores.
Accepted string for parsing are the same but are case insensitive.
We provide a table of strings->value for each Enumeration as well as a
convenience function to perform a lookup.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
/etc/init.d/xendomains relies on simple pattern matching from sructures
being printed by "xl list -l" command. so update xl implementation to
match.
Signed-off-by: Carsten Schiers <carsten@schiers.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
OCaml libraries will live in /usr/local/ if the user compiles OCaml
from source. This patch asks the OCaml compiler where we should look
for libraries.
NB: it may be that we should do the same thing for the NetBSD case,
but I don't have a BSD box to test this out.
Signed-off-by: Mike McClurg <mike.mcclurg@citrix.com>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
When adding pci devices one by one, pciback notice only the first one. For
every next, "state" is left as is (usualy "4" in that time), so backend will
not rescan xenstore. So when VM is starting all devices should be added at once
and then backend can initialize it.
This applies only to pci, because only pci backend have one xenstore dir for
multiple devices.
Signed-off-by: Marek Marczykowski <marmarek@mimuw.edu.pl>
Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Currently, xendomains service will save or migrate all the running domains in
the host on stop.
Change XENDOMAINS_AUTO_ONLY=true. Then on service stop, it will only
save or migrate all VMs under XENDOMAINS_AUTO (/etc/xen/auto), but always
shutdown all the running VMs.
It's a way to cleanly shutdown all the running VMs on system reboot. If you
want to save/migrate a VM, create a link to /etc/xen/auto.
Signed-off-by: Zhigang Wang <zhigang.x.wang@oracle.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
tools/xenpaging/mem_event.h is only included in xenpaging.h.
Add the contents into that file and remove mem_event.h.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Write all paged-out pages back into the guest if the pager is
interrupted by ctrl-c or if it receives SIGTERM.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
If xenpaging is started manually then no event is sent to xenpaging when
the guest is shutdown or rebooted. Add a watch on the @releaseDomain
node to leave the loop and gracefully shutdown the pager.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Unlink pagefile in the signal handler and also in the exit path.
This does not leave a stale pagefile if an error occoured.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Pass gfn as integer to xenpaging_populate_page(). xc_map_foreign_pages()
takes a pointer to a list of gfns, but its a const pointer. So writing
the value back to the caller is not needed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Set the starting gfn to somewhere in the middle of the gfn range to
avoid paging during BIOS startup. This can speedup booting of a guest.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Move num_pages into struct xenpaging.
num_pages will be used by the policy in a subsequent patch.
Also remove a memset, the victims array is allocated with calloc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Remove the local domain_id variable, it is already fetched from
paging->mem_event in other places.
Update the sprintf format string to use unsigned argument.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In the unlikely event that xc_mem_paging_resume() fails, do not overwrite the
error with the return value from xc_evtchn_notify()
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
get_request() and put_response() can not fail, remove return value
and update calling functions.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Ian Jackson
Keir Fraser
Jan Beulich
Tim Deegan
Wei Huang
James Carter
Marek Marczykowski
Anthony PERARD
Signed-off-by: Shriram Rajagopalan
Allen Kay
Ian Campbell
Carsten Schiers
Mike McClurg
Zhigang Wang
Stefano Stabellini
Olaf Hering