Testing on a Kaby Lake box with 8 CPUs leads to the serial buffer
being filled halfway during dom0 boot, and thus a non-trivial chunk of
Linux boot messages are dropped.
Increasing the buffer to 32K does fix the issue and Linux boot
messages are no longer dropped. There's no justification either on
why 16K was chosen, and hence bumping to 32K in order to cope with
current systems generating output faster does seem appropriate to have
a better user experience with the provided defaults.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Julien Grall <jgrall@amazon.com>
Some addressed comments on enable_boot_cpu_mm() were reintroduced
back during the code movement from arm64/head.S to arm64/mmu/head.S.
We should drop the unreachable code, move the 'mov lr, x5' closer to
'b remove_identity_mapping' so it is clearer that it will return,
and update the in-code comment accordingly.
Fixes: 6734327d76 ("xen/arm64: Split and move MMU-specific head.S to mmu/head.S")
Reported-by: Julien Grall <jgrall@amazon.com>
Signed-off-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Reviewed-by: Ayan Kumar Halder <ayan.kumar.halder@amd.com>
Currently, libxl will grant IOMEM, I/O port and IRQ permissions when
a PCI is attached (see pci_add_dm_done()) for all domain types. However,
the permissions are only revoked for non-HVM domain (see do_pci_remove()).
This means that HVM domains will be left with extra permissions. While
this look bad on the paper, the IRQ permissions should be revoked
when the Device Model call xc_physdev_unmap_pirq() and such domain
cannot directly mapped I/O port and IOMEM regions. Instead, this has to
be done by a Device Model.
The Device Model can only run in dom0 or PV stubdomain (upstream libxl
doesn't have support for HVM/PVH stubdomain).
For PV/PVH stubdomain, the permission are properly revoked, so there is
no security concern.
This leaves dom0. There are two cases:
1) Privileged: Anyone gaining access to the Device Model would already
have large control on the host.
2) Deprivileged: PCI passthrough require PHYSDEV operations which
are not accessible when the Device Model is restricted.
So overall, it is believed that the extra permissions cannot be exploited.
Rework the code so the permissions are all removed for HVM domains.
This needs to happen after the QEMU has detached the device. So
the revocation is now moved to pci_remove_detached().
Also add a comment on top of the error message when the PIRQ cannot
be unbind to explain this could be a spurious error as QEMU may have
already done it.
Signed-off-by: Julien Grall <jgrall@amazon.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Changesets 5852ca4852 (build: fix tools/configure in case only python3
exists) and c8a8645f1e ("xen/build: Automatically locate a suitable python
interpreter") cause the build to look for python3, python and python2 in that
order.
Remove the outdated note from the README.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Python distutils is deprecated and is going to be removed in Python
3.12. distutils.sysconfig is available as the sysconfig module in
stdlib since Python 2.7 and Python 3.2, so use that directly.
Update the README to reflect that we now depend on Python 2.7.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
[Regen ./configure]
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Python distutils is deprecated and is going to be removed in Python
3.12. Add support for setuptools.
Setuptools in Python 3.11 complains:
SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
Keep using setup.py anyway to build the C extension.
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
In preparation of supporting both distutils and setuptools, add the
python3 setuptools module to the containers that have recent python3
installations.
Debian Stretch, Ubuntu trusty (14.04), Ubuntu xenial (16.04) and
Ubuntu bionic (18.04) are kept without setuptools on purpose, to test
installations that don't have it.
Centos 7 in particular is kept with python2 only.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
It is unconditionally 0 in Xen, and was deleted in Linux somewhere between 2.5
and 2.6.
Remove it in Xen too.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
sh_set_toplevel_shadow() re-pinning the top-level shadow we may be
running on is not enough (and at the same time unnecessary when the
shadow isn't what we're running on): That shadow becomes eligible for
blowing away (from e.g. shadow_prealloc()) immediately after the
paging lock was dropped. Yet it needs to remain valid until the actual
page table switch occurred.
Propagate up the call chain the shadow entry that needs releasing
eventually, and carry out the release immediately after switching page
tables. Handle update_cr3() failures by switching to idle pagetables.
Note that various further uses of update_cr3() are HVM-only or only act
on paused vCPU-s, in which case sh_set_toplevel_shadow() will not defer
releasing of the reference.
While changing the update_cr3() hook, also convert the "do_locking"
parameter to boolean.
This is CVE-2023-34322 / XSA-438.
Reported-by: Tim Deegan <tim@xen.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: George Dunlap <george.dunlap@cloud.com>
Bring ppc's Makefile and arch.mk in line with arm and x86 to disable the
build overrides and enable the full Xen build.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add stub function and symbol definitions required by common code. If the
file that the definition is supposed to be located in doesn't already
exist yet, temporarily place its definition in the new stubs.c
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Additionally, change inclusion of asm/ headers to corresponding xen/ ones
throughout arch/ppc now that they work.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Make function declaration consistent with the corresponding definition.
No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
In the Zen1 microarchitecure, there is one divider in the pipeline which
services uops from both threads. In the case of #DE, the latched result from
the previous DIV to execute will be forwarded speculatively.
This is an interesting covert channel that allows two threads to communicate
without any system calls. In also allows userspace to obtain the result of
the most recent DIV instruction executed (even speculatively) in the core,
which can be from a higher privilege context.
Scrub the result from the divider by executing a non-faulting divide. This
needs performing on the exit-to-guest paths, and ist_exit-to-Xen.
Alternatives in IST context is believed safe now that it's done in NMI
context.
This is XSA-439 / CVE-2023-20588.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
We already have 3 cases using STIBP as a Zen1/2 heuristic, and are about to
introduce a 4th. Wrap the heuristic into a pair of predicates rather than
opencoding it, and the explanation of the heuristic, at each usage site.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There is a corner case where e.g. an NMI hitting an exit-to-guest path after
SPEC_CTRL_EXIT_TO_* would have run the entire NMI handler *after* the VERW
flush to scrub potentially sensitive data from uarch buffers.
In order to compensate, issue VERW when exiting to Xen from an IST entry.
SPEC_CTRL_EXIT_TO_XEN already has two reads of spec_ctrl_flags off the stack,
and we're about to add a third. Load the field into %ebx, and list the
register as clobbered.
%r12 has been arranged to be the ist_exit signal, so add this as an input
dependency and use it to identify when to issue a VERW.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Use %r12 to hold an ist_exit boolean. This register is zero elsewhere in the
entry/exit asm, so it only needs setting in the IST path.
As this is subtle and fragile, add check_ist_exit() to be used in debugging
builds to cross-check that the ist_exit boolean matches the entry vector.
Write check_ist_exit() it in C, because it's debug only and the logic more
complicated than I care to maintain in asm.
For now, we only need to use this signal in the exit-to-Xen path, but some
exit-to-guest paths happen in IST context too. Check the correctness in all
exit paths to avoid the logic bit-rotting.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
All other SPEC_CTRL_{ENTRY,EXIT}_* helpers hold stack_end in %r14. Adjust it
for consistency.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
... to better explain how they're used.
Doing so highlights that SPEC_CTRL_EXIT_TO_XEN is missing a VERW flush for the
corner case when e.g. an NMI hits late in an exit-to-guest path.
Leave a TODO, which will be addressed in subsequent patches which arrange for
VERW flushing to be safe within SPEC_CTRL_EXIT_TO_XEN.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
These have grown more complex over time, with some already having been
converted.
Provide full Requires/Clobbers comments, otherwise missing at this level of
indirection.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
With the SPEC_CTRL_EXIT_TO_XEN{,_IST} confusion fixed, it's now obvious that
there's only a single EXIT_TO_XEN path. Fold DO_SPEC_CTRL_EXIT_TO_XEN into
SPEC_CTRL_EXIT_TO_XEN to simplify further fixes.
When merging labels, switch the name to .L\@_skip_sc_msr as "skip" on its own
is going to be too generic shortly.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
c/s 3fffaf9c13 ("x86/entry: Avoid using alternatives in NMI/#MC paths")
dropped the only user, leaving behind the (incorrect) implication that Xen had
split exit paths.
Delete the unused SPEC_CTRL_EXIT_TO_XEN and rename SPEC_CTRL_EXIT_TO_XEN_IST
to SPEC_CTRL_EXIT_TO_XEN for consistency.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Implement bitops.h, based on Linux's implementation as of commit
5321d1b1afb9a17302c6cec79f0cbf823eb0d3fc. Though it is based off of
Linux's implementation, this code diverges significantly in a number of
ways:
- Bitmap entries changed to 32-bit words to match X86 and Arm on Xen
- PPC32-specific code paths dropped
- Formatting completely re-done to more closely line up with Xen.
Including 4 space indentation.
- Use GCC's __builtin_popcount* for hweight* implementation
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
OpenBSD 7.3 will unconditionally access HWCR if the TSC is reported as
Invariant, and it will then attempt to also unconditionally access PSTATE0 if
HWCR.TscFreqSel is set (currently the case on Xen).
The motivation for exposing HWCR.TscFreqSel was to avoid warning messages from
Linux. It has been agreed that Linux should be changed instead to not
complaint about missing HWCR.TscFreqSel when running virtualized.
The relation between HWCR.TscFreqSel and PSTATE0 is not clearly written down in
the PPR, but it's natural for OSes to attempt to fetch the P0 frequency if the
TSC is stated to increment at the P0 frequency.
Exposing PSTATEn (PSTATE0 at least) with all zeroes is not a suitable solution
because the PstateEn bit is read-write, and OSes could legitimately attempt to
set PstateEn=1 which Xen couldn't handle.
Furthermore, the TscFreqSel bit is model specific and was never safe to expose
like this in the first place. At a minimum it should have had a toolstack
adjustment to know not to migrate such a VM.
Therefore, simply remove the bit. Note the HWCR itself is an architectural
register, and does need to be accessible by the guest. Since HWCR contains
both architectural and non-architectural bits, going forward care must be taken
to assert the exposed value is correct on newer CPU families.
Reported-by: Solène Rapenne <solene@openbsd.org>
Link: https://github.com/QubesOS/qubes-issues/issues/8502
Fixes: 14b95b3b85 ('x86/AMD: expose HWCR.TscFreqSel to guests')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Gcc13 apparently infers from "if ( old_cpu < new_cpu )" that "new_cpu"
is >= 1, and then (on x86) complains about "per_cpu(timers, new_cpu)"
exceeding __per_cpu_offset[]'s bounds (being an array of 1 in such a
configuration). Make the code conditional upon there being at least 2
CPUs configured (otherwise there simply is nothing to migrate [to]).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: George Dunlap <george.dunlap@cloud.com>
Add missing parameter names and make function declarations and
definitions consistent. No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Skip the following Xen specific host device tree nodes/properties
from being included into hardware domain /chosen node:
- xen,static-heap: this property informs Xen about memory regions
reserved exclusively as static heap,
- xen,domain-shared-memory-v1: node with this compatible informs Xen
about static shared memory region for a domain. Xen exposes a different
node (under /reserved-memory with compatible "xen,shared-memory-v1") to
let domain know about the shared region,
- xen,evtchn-v1: node with this compatible informs Xen about static
event channel configuration for a domain. Xen does not expose
information about static event channels to domUs and dom0 case was
overlooked (by default nodes from host dt are copied to dom0 fdt unless
explicitly marked to be skipped), since the author's idea was not to
expose it (refer docs/misc/arm/device-tree/booting.txt, "Static Event
Channel"). Even if we wanted to expose the static event channel
information, the current node is in the wrong format (i.e. contains
phandle to domU node not visible by dom0). Lastly, this feature is
marked as tech-preview and there is no Linux dt binding in place.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Release-acked-by: Henry Wang <Henry.Wang@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Julien Grall <jgrall@amazon.com>
As per the last MISRA C group discussion, let's accept 11.7 (for which
we have no violations) and 11.8.
Signed-off-by: Stefano Stabellini <stefano.stabellini@amd.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Implement atomic.h for PPC, based off of the original Xen 3.2
implementation. This implementation depends on some functions that are
not yet defined (notably __cmpxchg), so it can't yet be used.
Signed-off-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contains violations of MISRA C:2012 Rule 7.2 whose
headline states:
"A 'u' or 'U' suffix shall be applied to all integer constants
that are represented in an unsigned type".
Addi the 'U' suffix to integers literals with unsigned type.
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contains violations of MISRA C:2012 Rule 7.2 whose
headline states:
"A 'u' or 'U' suffix shall be applied to all integer constants
that are represented in an unsigned type".
Add the 'U' suffix to integers literals with unsigned type.
For the sake of uniformity, the following change is made:
- add the 'U' suffix to all first macro's arguments
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The xen sources contains violations of MISRA C:2012 Rule 7.2 whose
headline states:
"A 'u' or 'U' suffix shall be applied to all integer constants
that are represented in an unsigned type".
Add the 'U' suffix to integers literals with unsigned type.
For the sake of uniformity, the following change is made:
- add the 'U' suffix to switch cases in 'cpuid.c'
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add missing parameter names and make function declarations and
definitions consistent. No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Use pdev->sbdf instead of the PCI_SBDF macro in calls to pci_* functions
where appropriate. Move NULL check earlier.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Convert pci_find_*cap* functions and call sites to pci_sbdf_t, and remove some
now unused local variables. Also change to more appropriate types on lines that
are already being modified as a result of the pci_sbdf_t conversion.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Paul Durrant <paul@xen.org>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Paul Durrant <paul@xen.org>
When creating dom0 with grant table support disabled in Xen and no IOMMU,
the following assert is triggered (debug build):
"Assertion 's <= e' failed at common/rangeset.c:189"
(XEN) Xen call trace:
(XEN) [<0000020000218568>] rangeset_remove_range+0xbc/0x2cc (PC)
(XEN) [<00000200002c76bc>] domain_build.c#make_hypervisor_node+0x294/0x7c4 (LR)
(XEN) [<00000200002ca240>] domain_build.c#handle_node+0x7ec/0x924
(XEN) [<00000200002ca7ac>] domain_build.c#construct_dom0+0x434/0x4d8
This is because find_unallocated_memory() (used to find memory holes
for extended regions) calls rangeset_remove_range() for an empty
grant table region. Fix it by checking if the size of region is not 0.
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
The xen sources contains violations of MISRA C:2012 Rule 7.2 whose
headline states:
"A 'u' or 'U' suffix shall be applied to all integer constants
that are represented in an unsigned type".
Add the 'U' suffix to integers literals with unsigned type and also to other
literals used in the same contexts or near violations, when their positive
nature is immediately clear. The latter changes are done for the sake of
uniformity.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
The fix for this issue was backported to 11.3, so let's not unduly
engage the workaround.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
The xen sources contain violations of MISRA C:2012 Rule 7.3 whose headline
states:
"The lowercase character 'l' shall not be used in a literal suffix".
Use the "L" suffix instead of the "l" suffix, to avoid potential ambiguity.
If the "u" suffix is used near "L", use the "U" suffix instead, for consistency.
The changes in this patch are mechanical.
Signed-off-by: Gianluca Luparini <gianluca.luparini@bugseng.com>
Signed-off-by: Simone Ballarin <simone.ballarin@bugseng.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Paul Durrant <paul@xen.org>
RTM debugging and BusLock Detect have both introduced conditional behaviour
into the %dr6/7 calculations which Xen's existing logic doesn't account for.
Introduce the CPUID bit for BusLock Detect, so we can get the %dr6 behaviour
correct from the outset.
Implement x86_adj_dr{6,7}_rsvd() fully, and use them in place of the plain
bitmasks.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jinoh Kang <jinoh.kang.kr@gmail.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Broken out of the subsequent patch for clarity.
Add stub x86_adj_dr{6,7}_rsvd() functions which will be extended in the
following patch to fix bugs, and adjust debugreg.h to compile with a more
minimal set of includes.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Right now, bad PV state is silently dropped and zeroed, while bad HVM state is
passed directly to hardware and can trigger VMEntry/VMRUN failures. e.g.
(XEN) d12v0 vmentry failure (reason 0x80000021): Invalid guest state (0)
...
(XEN) RFLAGS=0x00000002 (0x00000002) DR7 = 0x4000000000000001
Furthermore, prior to c/s 30f43f4aa8 ("x86: Reorganise and rename debug
register fields in struct vcpu") in Xen 4.11 where v->arch.dr6 was reduced in
width, the toolstack can cause a host crash by loading a bad %dr6 value on
VT-x hardware.
Reject any %dr6/7 values with upper bits set. For PV guests, also audit
%dr0..3 using the same logic as in set_debugreg() so they aren't silently
zeroed later in the function. Leave a comment behind explaing how %dr4/5
handling changed, and why they're ignored now.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add missing parameter names and make function declarations and
definitions consistent. No functional change.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The first of the commits referenced below didn't go far enough, and the
2nd of them, while trying to close (some of) the gap, wrongly kept using
the potentially type-safe variant. This is getting in the way of new
ports preferably not having any type-unsafe private code (and in
particular not having a need for any overrides in newly introduced
files).
Fixes: 41c48004d1 ("xen/mm: Use __virt_to_mfn in map_domain_page instead of virt_to_mfn")
Fixes: f46b619734 ("xen: Convert page_to_mfn and mfn_to_page to use typesafe MFN")
Reported-by: Shawn Anastasio <sanastasio@raptorengineering.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Shamelessly copy changes to gcov_info structures from linux so that we
can capture coverage for xen built with newer compilers.
Signed-off-by: Javi Merino <javi.merino@cloud.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Roger Pau Monne