When xen is configured with --disable-ocamltools then oxenstored will
still be the default if all required ocaml devel packages are installed.
The reason is that xenstored.m4 is included before the ocamltools check.
And xenstored.m4 does not use the result of --disable-ocamltools.
Rearrange the code to check first for the presence of ocaml, then check
--disable-ocamltools and finally decide what sort of xenstored should be
the default.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- ran autogen.sh as requested]
After commit b0f69ec5c7 ("tools: Make
qemu-xen-traditional build optional.") the existing make targets are
wrapped in ifeq ($(CONF),y), but CONF is never set because
config/Tools.mk is not included.
Drop the dead code. The same effect can be achieved by calling the make
commands directly, after calling configure.
A better approach would be a simple, single 'make $something' which
should be a wrapper around a targets in tools/Makefile that clones,
updates and cleans the subprojects. That has to be worked out in a
different patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
stubdom/lwip-x86_64/src/core/dhcp.c: In function 'dhcp_create_request':
stubdom/lwip-x86_64/src/core/dhcp.c:1361:64: error: array subscript is above array bounds
The previous attempt to fix the failure above worked fine in SLE11,
openSUSE 13.1 and newer. But gcc-4.5 as included in openSUSE 11.4 still
failed to compile. To fix compilation also with this version of gcc move
the range check right into the code instead of assigning it to a
temporary variable.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Set CONFIG_LEAF_DIR with configure to give control if needed. The
check for the correct value if the option is not specified is tricky.
Since other packages (such as grub2) started to populate also
/etc/default/ a given system may have both directories.
Use "default" only if /etc/sysconfig does not exist. "sysconfig"
remains the default.
Move the variable from StdGNU.mk to Linux.mk because thats the only
place where it is used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
This replaces config/Linux.modules with a configure option. As a result
of this change only a single xencomons.in is required, instead of a
xencomons.in.in and sed hackery.
After this change blktap2 and blktap will be loaded at the same time.
This is already done in out-of-tree xencommons scripts, and systemd will
load both modules as well. No harm is expected by loading both modules.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
The current usage of LIBEXEC is bogus. It describes the directory for
private xen executables. Other places create their own, similar
libexecdir path as $prefix/lib/xen/*.
Additional two other variables are used to describe similar paths:
PRIVATE_BINDIR and PRIVATE_PREFIX
The autoconf documentation refers to libexec as a directory for
executables and stuff which is called by other programs, not by the
user.
Adjust all places that want libexecdir as a target path. LIBEXEC refers
now to the base directory. Three convenience variables are used to refer
to paths to private binaries, libs and include files.
In the systemd files LIBEXEC_BIN is substituted, so this variable has to
be present in autoconf. All other variables are expanded in Paths.mk
because they are only used in Makefiles.
Most users of LIBEXEC are updated to use LIBEXEC_BIN because that is
what they want.
Users of PRIVATE_BINDIR are updated to use LIBEXEC_BIN because that is
what they want. PRIVATE_BINDIR and PRIVATE_PREFIX usage is removed by
this patch, in favour of LIBXEC_BIN and LIBEXEC
An internal libxl function was removed. A single helper to retrieve
LIBEXEC_BIN remains.
As suggested by the autoconf documentation, configure appends the
package name to LIBEXEC to make sure the provided directory really
refers to xen. This makes sure "make uninstall" preserves the real
libexecdir.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: George Dunlap <george.dunlap@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Samuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested, updated QEMU_TRADITIONAL_REVISION to
pickup version which uses LIBEXEC_BIN ]
This patch lays the groundwork to convert variables used in Makefiles
to the common automake style, i.e. PREFIX becomes prefix, MANDIR becomes
mandir and so on.
The reason is that configure variables such as mandir expand to
${datarootdir}/man, and datarootdir expands to ${prefix}/share. This
requires extra expansion in configure.ac before assigning to MANDIR.
Special care must be taken when variable substition is done in other
files, such as xencommons.in. All @VARIABLES@ used in these files have
to be the expanded version, or all other variables must be available at
runtime.
This patch by itself changes nothing, but upcoming changes will make use
of the lowercase variables.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
... because they are already in Paths.mk:
BINDIR, LIBEXEC, PRIVATE_BINDIR, PRIVATE_PREFIX, SBINDIR, SHAREDIR,
XEN_CONFIG_DIR, XENFIRMWAREDIR, XEN_LOCK_DIR, XEN_PAGING_DIR,
XEN_RUN_DIR. Remove unused PKG_XEN_PREFIX, which was also incorrectly
assigned to PRIVATE_PREFIX.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
Helper scripts get installed into XEN_SCRIPT_DIR, but initscripts,
helper scripts and udev rules still refer to the hardcoded location
/etc/xen/scripts/. Update scripts, rules and Makefile to refer to
@XEN_SCRIPT_DIR@ instead.
Update configure.ac to substitute the path in files using
XEN_SCRIPT_DIR. Remove XEN_SCRIPT_DIR from StdGNU.mk and SunOS.mk, its
already in Paths.mk.
Note: In SunOS.mk it refered to PRIVATE_PREFIX, which was introduced by
9f6d07bac9 ("tools: get rid of hardcoded
config dirs").
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- ran autogen.sh as requested ]
A make -j8 will call the xen.conf rule twice. The move-if-changed
macro may fail if the tmp file was already removed by the other make
process. Fix this by let the all target depend on install.
Also remove the generated file with make clean.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
[ ijc -- fixed s/of/if/ typo in commit message ]
The uninstall target does not know about the paths it removes because
the toplevel Makefile does not include the required files.
Move the commands to tools/Makefile because all files come from subdirs
in tools/ anyway. Drop the removal of $(XEN_RUN_DIR) because it gets
created at runtime. Drop the removal of systemd related files because
the wildcard matches everything.
The proper fix is to remove the files and directories in the Makefiles
which install them. But this version is the least intrusive change at
this point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Cc: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Preserve existing behaviour: if the option was not given, set existing
defaults for FreeBSD, Solaris and everything else.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
In preparation to remove hardcoded /var/run/xen paths, provide
XEN_RUN_DIR and related directories to xc_private.h. Similar code exists
already for libxl, stubdom and other parts.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Replace usage of buildmakevars2file with buildmakevars2header. The macro
generates a C header file, so remove code which converts shell variables
into C defines. Also update the dependency, the macro itself creates a
dependency for _paths.h. A temporary file is not needed anymore.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This macro is similar to buildmakevars2file, it just creates a C header
file instead of shell style syntax. Upcoming changes will use this macro
in libxl and libxc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
genpath is a detail of buildmakevars2file. Replace the dependency to
genpath with the actual buildmakevars2file target. This change by
itself does not fix any bug. Upcoming changes will add dependencies to
$(target), but no rule exist to create $(target).
To force a rebuild of the $(1) rule the target now depends on the
existing .phony target. This dummy target is already used elsewhere in
the code.
No change in behaviour is expected by this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
To maintain the list of directories in a single place, move the existing
list into its own variable and use it in buildmakevars2file.
Required for upcoming changes.
Trim also whitespaces.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
/var/run is a runtime directory. It is not supposed to be packaged.
Remove unused SUBSYS_DIR variable from Config.mk and distro_mapping.txt.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
install-hotplug and install-udev are obsolete since commit 57bcfa11
("tools/hotplug: Separate OS-specific scripts.")
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_LOCK_DIR because it is a compiletime setting. Also /var/lock
might be empty on startup because it is a tmpfs mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Create XEN_RUN_DIR instead of hardcoded path because it is a compiletime
setting. Also /var/run might be empty on startup because it is a tmpfs
mount point.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Move location of temporary bootfiles from /var/run/xend/boot to
/var/run/xen/pygrub. Create the subdirectory if does not exist.
The <dir> argument --output-directory must be an existing directory.
The reason for this change is that all entrys below /var/run have to be
created at runtime in case /var/run is cleared on every boot.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The directory tools/python/xen/util does not exist.
Upcoming changes to genpath will fail if the rule persists.
Nothing uses path.py (anymore?), so get rid it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ ijc -- removed from .gitignore too ]
Even if xen is configured and compiled with different --prefix= so that
it operates entirely below $prefix, the resulting package from 'make
rpmball' is always called "xen.rpm".
Use an environment name to give a different name.
This can be used like this:
suffix=-bugN
prefix=/opx/xen/staging${suffix}
./configure --prefix=${prefix}
make rpmball PKG_SUFFIX=${suffix}
The result will be "xen-bugN.rpm" instead of "xen.rpm". The benefit is that
many xen${suffix}.rpm packages can be installed at the same time.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
stubdom/lwip-x86_64/src/core/dhcp.c: In function 'dhcp_create_request':
stubdom/lwip-x86_64/src/core/dhcp.c:1359:71: error: array subscript is above array bounds [-Werror=array-bounds]
dhcp->msg_out->chaddr[i] = (i < netif->hwaddr_len) ? netif->hwaddr[i] : 0/* pad byte*/;
gcc can not know if hwaddr_len exceeds the hwaddr array size,
so force an upper limit to assist gcc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
CFLAGS+=-Wall is already provided by Config.mk
WARN_FLAGS is not used.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
If -Wextra is appended to CFLAGS it will enable all warnings. Previous
options such as -Wno-unused-parameters have no effect anymore. As a
result compilation will fail with gcc-4.3. Newer versions of gcc will
appearently remember -Wno-* options before -Wextra.
Rearrange warning options for gcc so that -Wextra comes before other -W
options. This fixes compilation of stubdom in SLES11.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Compilation fails with gcc-4.3:
tpmback.c: In function 'tpmback_resp':
tpmback.c:148: error: inlining failed in call to 'tpmdev_check_req': call is unlikely and code size would grow
tpmback.c:165: error: called from here
tpmback.c: In function 'new_tpmif':
tpmback.c:384: error: inlining failed in call to '__init_tpmif': call is unlikely and code size would grow
tpmback.c:425: error: called from here
Adjust code to use static instead of inline, it has the same effect.
Change also tpmif_req_ready and tpmif_req_finished before they start to
cause failures.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
gcc-4.3 fails to prove that array indices will remain positive. Add a
hint for the compiler and check the index value before using it.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Initialze discard_enable properly. This avoids a crash if a
libxl_device_disk with an uninitialized discard_enable is passed to
device_disk_add. Up to now only xl initialized discard_enable in its
config parser. External users of libxl, such as libvirt, do not need to
provide a default value.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Handle new boolean option discard/no-discard for disk configuration. It
is supposed to disable discard support if file based backing storage was
intentionally created non-sparse to avoid fragmentation of the file.
The option intended for the backend driver. A new boolean property
"discard-enable" is written to the backend node. An upcoming patch for
qemu will make use of this property. The kernel blkback driver may be
updated as well to disable discard for phy based backing storage.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Xen is currently installed into /boot, which is a hardcoded path. This
makes it impossible to install two xen.rpm packages from 'make rpmball'
in parallel because rpm complains about conflicting files.
Use BOOT_DIR to define the install path to make it possible to install
xen.gz below --prefix=.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Reviewed-by: Ian Campbell <ian.campbell@citrix.com>
xencommons creates the _hardcoded_ /var/run/xen already, there is no
need to create and package this directory during make install|rpmball.
Without this change installing the resulting xen.rpm will fail on
systems where /var/run is a symlink. rpm complains that '/var/run' (the
symlink) is already owned by some other system rpm package.
Using XEN_RUN_DIR instead of /var/run/xen tree-wide may be done in a
followup patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
pygrub stores the temporary kernel+initrd files in /var/run/pygrub, or
any other directory specified with --output-directory=<dir>. If the
default dir is missing pygrub will create it.
Without this change installing the resulting xen.rpm will fail on
systems where /var/run is a symlink. rpm complains that '/var/run' (the
symlink) is already owned by some other system rpm package.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
/var/lock/subsys is used only in tools/hotplug/Linux/init.d/xendomains.
The start() function already does a "mkdir /var/lock/subsys", so its not
required to create this directory during make install|rpmball.
Without this change installing the resulting xen.rpm will fail on
systems where /var/lock is a symlink. rpm complains that '/var/lock'
(the symlink) is already owned by some other system rpm package.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
xenstored already does "mkdir /var/run/xenstored" on startup, so its not
required to create this directory during make install|rpmball.
Without this change installing the resulting xen.rpm will fail on
systems where /var/run is a symlink. rpm complains that '/var/run' (the
symlink) is already owned by some other system rpm package.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Attaching a CDROM device with 'xm scsi-attach domU /dev/sr0 0:0:0:0'
fails because for some reason the sr driver was not handled at all in
the match list. With the change the above command succeeds and the
device is attached.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Matt Wilson <msw@amazon.com>
The two assert in restore trigger sometimes after hundreds of
migrations. If they trigger the destination host will not destroy the
newly created, yet empty guest. After a second migration attempt to this
host there will be two guets with the same name and uuid. This situation
is poorly handled by the xm tools.
With this change the empty guest will be destroyed.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Matt Wilson <msw@amazon.com>
Callers of xc_domain_save use errno to print diagnostics if the call
fails. But xc_domain_save does not preserve the actual errno in case of
a failure.
This change preserves errno in all cases where code jumps to the label
"out". In addition a new label "exit" is added to catch also code which
used to do just "return 1".
Now libxl_save_helper:complete can print the actual error string.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
disk=[ ' target=/dev/loop0 ' ] will fail to parse because
'/dev/loop ' does not exist.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Also fix the name of the discard-alignment property, add the missing 'n'.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
man/xl.cfg.pod.5 around line 1193: '=item' outside of any '=over'
POD document had syntax errors at /usr/bin/pod2man line 71.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Since xen-3.3 an official unplug protocol for emulated hardware is
available in the toolstack. The pvops kernel does the unplug per
default, so it is safe to do it also in the drivers for forward ported
xenlinux.
Currently its required to load xen-platform-pci with the module
parameter dev_unplug=all, which is cumbersome.
Also recognize the dev_unplug=never parameter, which provides the
default before this patch.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
If xenpaging is started very early for a guest the gfn for the hypercall
page may be paged-out already. This leads to a guest crash:
...
(XEN) HVM10: Allocated Xen hypercall page at 169ff000
(XEN) traps.c:654:d10 Bad GMFN 169ff (MFN 3e900000000) to MSR 40000000
(XEN) HVM10: Detected Xen v4.3
(XEN) io.c:201:d10 MMIO emulation failed @ 0008:c2c2c2c2: 18 7c 55 6d 03 83 ff ff 10 7c
(XEN) hvm.c:1253:d10 Triple fault on VCPU0 - invoking HVM shutdown action 1.
(XEN) HVM11: HVM Loader
...
Update return codes of wrmsr_hypervisor_regs, update callers to deal
with the new return codes:
0: not handled
1: handled
-EAGAIN: retry
Currently wrmsr_hypervisor_regs will not return the following error, it
will be added in a separate patch:
-EINVAL: error during handling
Also update the gdprintk to handle a page value of NULL to avoid
printing a bogus MFN value. Update also computing of MSR value in
gdprintk, the idx was always zero.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Keir Fraser <keir@xen.org>
Olaf Hering