... ahead of extending it with a second test.
Rename run_tests() to test_paging_mempool_size() and have it return int so the
new run_tests() can decide whether to run subsequent tests or not.
Comment the parameters to xc_domain_populate_physmap_exact() to make it
clearer what's going on, and remove the page added to the physmap when the
test is done.
No practical change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Provide support for this insn, which is a prereq to FRED. CPUID-wise,
while its and FRED's enumerators were already introduced, their dependency
still needs adding.
While adding a testcase, also add a SWAPGS one. In order to not affect
the behavior of pre-existing tests, install write_{segment,msr} hooks
only transiently.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
EVEX.W meaning is unusual for VBMAC{,X}OR16x16x16, but that needs taking
care of only in the test harness.
Like already proposed in "x86emul: support AVX10.1", use just
vcpu_must_have(), not host_and_vcpu_must_have().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
While in principle it's possible to have a vendor virtualising another,
this is fairly tricky in practice and comes with the world's supply of
security issues.
Reject any CPU policy with vendors not matching the host's.
Signed-off-by: Alejandro Vallejo <alejandro.garciavallejo@amd.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com> # CHANGELOG.md
The limitation of which tests can be build on 32bit is too strict. Move
some tests out of the 64bit explicit region, as they can also be built on
32bits.
Fixes: cb50e40337 ("test/pdx: add PDX compression unit tests")
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
When building the PDX test harness as a 32bit executable the page shifts
done on unsigned long types can overflow. Instead use pfn_to_paddr(),
which casts the values to paddr_t previous to doing the shift.
Fixes: cb50e40337 ("test/pdx: add PDX compression unit tests")
Reported-by: Edwin Török <edwin.torok@citrix.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
clang would duplicate the loop body and end up with a double definition
of the symbol:
```
/tmp/test_x86_emulator-0f3576.s:27823: Error: symbol `vmovsh_to_mem' is already defined
/tmp/test_x86_emulator-0f3576.s:27825: Error: symbol `.Lvmovsh_to_mem_end' is already defined
```
Until a better solution is found: reduce optimizations in the test runner.
Using -Os might also work, but we can't rely on the size optimization
always avoiding the duplication of asm blocks.
This is test code, not performance critical code, and -O0 is more future
proof.
However for debugging -Og is recommended over -O0, and this still avoids
the duplicate label problem.
Signed-off-by: Edwin Török <edwin.torok@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Fixes this `-fsanitize=undefined` error:
```
test_x86_emulator.c:614:12: runtime error: null pointer passed as argument 1, which is declared to never be null
/usr/include/string.h:44:28: note: nonnull attribute specified here
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior test_x86_emulator.c:614:12
```
Although this is more of a grey area: I don't see anything in the
standard that'd forbid calling `memcpy` with NULL and 0, but `glibc`
does specify it as non-null, which allows the compiler to make
optimizations assuming it never is NULL, so this is undefined behaviour
only on glibc.
Best to avoid the potential undefined behaviour though.
Signed-off-by: Edwin Török <edwin.torok@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Fixes this `-fsanitize=undefined` error:
```
test_x86_emulator.c:1103:32: runtime error: left shift of 573785183 by 2 places cannot be represented in type 'int'
SUMMARY: UndefinedBehaviorSanitizer: undefined-behavior test_x86_emulator.c:1103:32
```
Signed-off-by: Edwin Török <edwin.torok@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Before adding more private stuff to xen/vpci.h, split it up. In order to
be able to include the private header first in a CU, the per-arch struct
decls also need to move (to new asm/vpci.h files).
While adjusting the test harness'es Makefile, also switch the pre-existing
header symlink-ing rule to a pattern one.
Apart from in the test harness code, things only move; no functional
change intended.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
... to a dedicated subdir of x86's private lib/ sub-tree.
For the CPU policy harnesses and libxenguest use $(lib-y) as set by the
new Makefile.common, whereas for the emulator harnesses stick to building
just cpuid.o for the time being.
Requested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
clang-21 refuses to compile this:
```
test_x86_emulator.c:1164:24: error: shifting a negative signed value is undefined [-Werror,-Wshift-negative-value]
1164 | regs.r8 = (-1L << 40) + 1;
| ~~~ ^
1 error generated.
```
The shift could also exceed the width of the type on some systems.
I confirmed that both the old and the new code would produce the same value
with GCC on x86-64: `0xffffff0000000001`.
Signed-off-by: Edwin Török <edwin.torok@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Replace the remaining non-local symlink-ing (i.e. of core emulator files)
as well, to avoid mixing approaches. (The symlink-ing of test blob sources
needs to remain for the time being.)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
... and split the x86 group away from the common group.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
The error messages that the compiler may emit can be confusing.
The check was also the wrong way round in case multiple make targets are
specified: We want to do the check whenever targets other than the running
and cleaning ones are specified.
Fixes: 05f4cc2192 ("x86emul: suppress default test harness build with incapable compiler")
Fixes: d5997399b7 ("x86emul: suppress "not built" warning for test harness'es run targets")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Many *.c files are symlinked while building, so along with generated *.h
files they ought to be removed. Conversely $(TARGET) doesn't need removing
twice.
Fixes: cb4fcf70b2 ("x86emul: parallelize SIMD test code building")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Introduce some basic infrastructure for doing domain ID allocation unit tests,
and add a few tests that ensure correctness of the domain ID allocator.
Use <xen-tools/bitops.h> and xen/lib/find-next-bit.c in test hardness code.
Adjust find-next-bit.c to be compiled with __XEN_TOOLS__.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
vpci_remove_register() only supports removing a register in a time,
but the follow-on changes need to remove all registers within a range.
So, refactor it to support removing all registers in a given region.
And it is no issue to remove a non exist register, so remove the
__must_check prefix.
Note: two test cases don't math the new logic of
vpci_remove_registers(), then modify them.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
With the appearance of Intel Sierra Forest and Granite Rapids it's now
possible to get a production x86 host with the following memory map:
SRAT: Node 0 PXM 0 [0000000000000000, 000000007fffffff]
SRAT: Node 0 PXM 0 [0000000100000000, 000000807fffffff]
SRAT: Node 1 PXM 1 [0000063e80000000, 000006be7fffffff]
SRAT: Node 2 PXM 2 [00000c7e80000000, 00000cfe7fffffff]
SRAT: Node 3 PXM 3 [000012be80000000, 0000133e7fffffff]
This is from a four socket Granite Rapids system, with each node having
512GB of memory. The total amount of RAM on the system is 2TB, but without
enabling CONFIG_BIGMEM the last range is not accessible, as it's above the
16TB boundary covered by the frame table. Sierra Forest and Granite Rapids
are socket compatible, however Sierra Forest only supports 2 socket
configurations, while Granite Rapids can go up to 8 sockets.
Note that while the memory map is very sparse, it couldn't be compressed
using the current PDX_MASK compression algorithm, which relies on all
ranges having a shared zeroed region of bits that can be removed.
The memory map presented above has the property of all regions being
similarly spaced between each other, and all having also a similar size.
Use a lookup table to store the offsets to translate from/to PFN and PDX
spaces. Such table is indexed based on the input PFN or PDX to translated.
The example PFN layout about would get compressed using the following:
PFN compression using PFN lookup table shift 29 and PDX region size 0x10000000
range 0 [0000000000000, 0x0000807ffff] PFN IDX 0 : 0000000000000
range 1 [0x00063e80000, 0x0006be7ffff] PFN IDX 3 : 0x00053e80000
range 2 [0x000c7e80000, 0x000cfe7ffff] PFN IDX 6 : 0x000a7e80000
range 3 [0x0012be80000, 0x00133e7ffff] PFN IDX 9 : 0x000fbe80000
Note how the tow ranges belonging to node 0 get merged into a single PDX
region by the compression algorithm.
The default size of lookup tables currently set in Kconfig is 64 entries,
and the example memory map consumes 10 entries. Such memory map is from a
4 socket Granite Rapids host, which in theory supports up to 8 sockets
according to Intel documentation. Assuming the layout of a 8 socket system
is similar to the 4 socket one, it would require 21 lookup table entries to
support it, way below the current default of 64 entries.
The valid range of lookup table size is currently restricted from 1 to 512
elements in Kconfig.
An extra array is used to keep track of the base PFN for each translated
range. Non used slots are set to ~0UL, so that in mfn_valid() the mfn <
base check always fails, thus reporting the mfn as invalid.
Introduce __init_or_pdx_mask and use it on some shared functions between
PDX mask and offset compression, as otherwise some code becomes unreachable
after boot if PDX offset compression is used. Mark the code as __init in
that case, so it's pruned after boot.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Otherwise Coverity complains about possibly shifting an integer more than
31 bits.
This also reverts the previous attempt to fix this Coverity reported
issue, commit 4dd3230290.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Coverity ID: 1662707
Fixes: cb50e40337 ('test/pdx: add PDX compression unit tests')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Introduce a set of unit tests for PDX compression. The unit tests contains
both real and crafted memory maps that are then compressed using the
selected PDX algorithm. Note the build system for the unit tests has been
done in a way to support adding new compression algorithms easily. That
requires generating a new test-pdx-<compress> executable that's build with
the selected PDX compression enabled.
Currently the only generated executable is test-pdx-mask that tests PDX
mask compression.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Depending on the build environment, HOSTCC can be different than CC. With
the recent `install` rule addition, this would put a binary of a wrong
format in the destdir (e.g. building tests on x86 host for Arm target).
Take the opportunity to adjust the `run` rule to only run the test if
HOSTCC is CC, else print a warning message.
Fixes: 96a587a057 ("tools/tests: Add install target for vPCI")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Unlike the other tests, this is not standalone. It requires poking at a live
system, making it unweildly to use.
It also hasn't been touched in 7 years, despite changes in libraries and
kernel devices using the deprivilege infrastructure.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
The Indirect Target Selection speculative vulnerability means that indirect
branches (including RETs) are unsafe when in the first half of a cacheline.
This means it's not safe for logic using the stubs to write raw 0xc3's.
Introduce place_ret() which, for now, writes a raw 0xc3 but will contain
additional logic when return thunks are in use.
stub_selftest() doesn't strictly need to be converted as they only run on
boot, but doing so gets us a partial test of place_ret() too.
No functional change.
This is part of XSA-469 / CVE-2024-28956
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
There are two originators for the PCI configuration space access:
1. The domain that owns physical host bridge: MMIO handlers are
there so we can update vPCI register handlers with the values
written by the hardware domain, e.g. physical view of the registers
vs guest's view on the configuration space.
2. Guest access to the passed through PCI devices: we need to properly
map virtual bus topology to the physical one, e.g. pass the configuration
space access to the corresponding physical devices.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Fix few issue with this new directory:
- clean generated files
- and ignore those generated files
- include the dependency files generated by `gcc`.
- rework prerequisites:
"test-rangeset.o" also needs the generated files "list.h" and
"rangeset.h". Technically, both only needs "harness.h" which needs
the generated headers, but that's a bit simpler and the previous
point will add the dependency on "harness.h" automatically.
This last point fix an issue where `make` might decide to build
"test-rangeset.o" before the other files are ready.
Fixes: 7bf777b42c ("tootls/tests: introduce unit tests for rangesets")
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Introduce some basic infrastructure for doing rangeset unit tests, and add
a few tests that ensure correctness of rangeset subtraction.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Use of Xeon Phi features was dropped earlier on; this one was overlooked.
Fixes: 85191cf321 ("x86: drop Xeon Phi support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In a 64bit-clean environment, blowfish fails:
make[6]: Leaving directory
'/builddir/build/BUILD/xen-4.19.1/tools/tests/x86_emulator'
In file included from /usr/include/features.h:535,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from
/usr/lib/gcc/x86_64-xenserver-linux/12/include/stdint.h:9,
from blowfish.c:18:
/usr/include/gnu/stubs.h:7:11: fatal error: gnu/stubs-32.h: No such
file or directory
7 | # include <gnu/stubs-32.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
make[6]: *** [testcase.mk:15: blowfish.bin] Error 1
because of lack of glibc-i386-devel or equivelent. It's non-fatal, but
reduces the content in test_x86_emulator, which we do care about running.
Instead, convert all emulator testcases to being freestanding builds, resuing
the tools/firmware/include/ headers.
This in turn requires making firmware's stdint.h compatible with 64bit builds.
We now have compiler types for every standard type we use.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch is preparation for making stack protector
configurable. First step is to remove -fno-stack-protector flag from
EMBEDDED_EXTRA_CFLAGS so separate components (Hypervisor in this case)
can enable/disable this feature by themselves.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This is actually what the caller acquire_resource() expects on any kind
of error (the comment on top of resource_max_frames() also suggests that).
Otherwise, the caller will treat -errno as a valid value and propagate incorrect
nr_frames to the VM. As a possible consequence, a VM trying to query a resource
size of an unknown type will get the success result from the hypercall and obtain
nr_frames 4294967201.
Also, add an ASSERT_UNREACHABLE() in the default case of _acquire_resource(),
normally we won't get to this point, as an unknown type will always be rejected
earlier in resource_max_frames().
Also, update test-resource app to verify that Xen can deal with invalid
(unknown) resource type properly.
Fixes: 9244528955 ("xen/memory: Fix acquire_resource size semantics")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Due to presumably a copy-and-paste mistake VPBROADCASTMB2Q was tested
twice instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The pseudo keyword fallthrough shall be used to make explicit the
fallthrough intention at the end of a case statement (doing this
using comments is deprecated).
A definition of such pseudo keyword is already present in the
Xen build. This auxiliary definition makes it available also for
for test and fuzzing harness without iterfearing with the one
that the Xen build has.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
While result values and other status flags are unaffected as long as we
can ignore the case of registers having their upper 32 bits non-zero
outside of 64-bit mode, EFLAGS.SF may obtain a wrong value when we
mistakenly re-execute the original insn with VEX.W set.
Note that guest the memory access, if any, is correctly carried out as
32-bit regardless of VEX.W. The emulator-local memory operand will be
accessed as a 64-bit quantity, but it is pre-initialised to zero so no
internal state can leak.
Fixes: 771daacd19 ("x86emul: support BMI1 insns")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Apparently I blindly copied the constants from the BEXTR case, where SF
indeed wants leaving out. For BLSI, BLSMSK, BLSR, and BZHI SF is
defined, and hence wants checking. This is noticable in particular for
BLSR, where with the input we use SF will be set in the result (and
hence is being switched to be clear on input).
Convert to using named constants we have available, while omitting DF,
TF, as well as the MBZ bits 3 and 5 from the masking values in the
checks of the produced output. For BZHI also set SF on input, expecting
it to transition to clear.
Fixes: 771daacd19 ("x86emul: support BMI1 insns")
Fixes: 8e20924de1 ("x86emul: support BMI2 insns")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Gating the main part of what do_test() does is wrong: As it stands, the
"memory" forms of BNDC{L,N,U} weren't tested because of this mistake.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
To represent the USER-MSR bitmap access, a new segment type needs
introducing, behaving like x86_seg_none in terms of address treatment,
but behaving like a system segment for page walk purposes (implicit
supervisor-mode access).
While there also add x86_seg_none handling to the test harness'es
read() hook, as will be needed for MSR-LIST support.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Unconditionally wire this through the ->rmw() hook. Since x86_emul_rmw()
now wants to construct and invoke a stub, make stub_exn available to it
via a new field in the emulator state structure.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
msr-index.h has been in use for a while, so use the identifiers it
provides in place of raw numbers plus comments.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Andrew Cooper