Remove xc_dominfo_t from paging_t, record only max_pages.
This value is used to setup internal data structures.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Move comment about xc_handle to the right place.
Allocate paging early and use calloc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Catch lseek() errors.
Use -1 as return value and let caller read errno.
Remove const casts from buffer pointers, the page is writeable.
Use wrapper for write() which matches the read() prototype.
Remove unused stdarg.h inclusion.
Remove unused macro.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
v3:
- adjust arguments for xc_mem_paging_enable() failures
v2:
- move changes to file_op() to different patch
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Remove stale comment.
If a page was populated several times the vcpu is paused and
xenpaging has to unpause it again.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In libvchan_client_init, go to the error path if the gntdev device is
not available. Otherwise, a segfault happens later as the vchan
context is invalid.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
We were immediately putting the p2m entry translation for grant
copy operations. This allowed for an unnecessary race by which the
page could have been swapped out between the p2m lookup and the actual
use. Hold on to the p2m entries until the grant operation finishes.
Also fixes a small bug: for the source page of the copy, get_page
was assuming the page was owned by the source domain. It may be a
shared page, since we don't perform an unsharing p2m lookup.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Instead of risking deadlock by holding onto the gfn's acquired during
a guest page table walk, acquire an extra reference within the get_gfn/
put_gfn critical section, and drop the extra reference when done with
the map. This ensures liveness of the map, i.e. the underlying page
won't be paged out.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
XENPF_get_cpuinfo should init the flags output field rather than only
modify it.
XENPF_cpu_online must check for the input CPU number to be in range.
XENPF_cpu_offline must also do that, and should also reject attempts to
offline CPU 0 (this fails in cpu_down() too, but preventing this here
appears more correct given that the code here calls
continue_hypercall_on_cpu(0, ...), which would be flawed if cpu_down()
would ever allow bringing down CPU 0 (and a distinct error code is
easier to deal with when debugging issues).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Allow pages typed log dirty to be paged out, and the proper type to
restored when paging pages back in.
Signed-off-by: Andres lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Adin Scannell <adin@scannell.ca>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
queue on exit, even after a wakeup.
Otherwise, when we go round the loop in wait_event(), we may not
actually sleep after the first iteration, as we do not put ourselves
back on the queue on wakeup.
Signed-off-by: Keir Fraser <keir@xen.org>
The Intel GPU uses a two pages NVS region called OpRegion.
In order to get full support for the driver in the guest
we need to map this region.
This patch reserves 2 pages on the top of the memory in the
reserved area and mark this region as NVS in the e820. Then
we write the address to the config space (offset 0xfc) so the
device model can map the OpRegion at this address in the guest.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
When updating a p2m mapping to shared, previous code
unconditionally set the m2p entry for the old mfn to invalid.
We now check that the old mfn does not remain shared.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Disabling log dirty mode in HAP always returns -EINVAL. Make it
return the correct rc on success.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Signed-off-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
The path p2m-lookup -> p2m-pt->get_entry -> 1GB PoD superpage ->
pod_demand_populate ends in the pod code performing a p2m_set_entry with
no locks held (in order to split the 1GB superpage into 512 2MB ones)
Further, it calls p2m_unlock after that, which will break the spinlock.
This patch attempts to fix that.
Signed-off-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
This undoes a single change from c/s 24136:3622d7fae14d
(common/grant_table.c) and several from c/s 24100:be8daf78856a
(common/memory.c). It also completes the former with two previously
missing ia64 specific code adjustments. Authors Cc-ed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andres Lagar-Cavilla <andres@lagarcavilla.org>
To acknowledge the tools' setting of control/shutdown it is normal for
PV drivers to rm the key. This leads to libxl__xs_read() returning
NULL and thus a subsequent strcmp on the return value will cause a
segfault.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
24184:4ecd3615e726 missed this because I was accidentally testing with a
.config containing CONFIG_SYSTEM_LIBAIO=n. Tools tree now fully rebuilt
without this. There were no other issues.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
I think these are better off deleted than remaining to confuse people.
docs/misc/blkif-drivers-explained.txt:
- Talks about Xen 2.0 beta, talks about the old pre-xenstored IPC mechanism.
docs/misc/cpuid-config-for-guest.txt:
- Doesn't really say anything, in particular doesn't actually describe how to
configure CPUID.
docs/misc/hg-cheatsheet.txt:
- Not out of date per-se wrt mercural but talk about Xen 2.0 and gives URLs
under www.cl.cam.ac.uk. Talks a lot about bitkeeper. Given that mercurial is
hardly unusual anymore I think there must be better guides out there so this
one is not worth resurecting.
docs/misc/network_setup.txt:
- This is more comprehensively documented on the wiki these days.
docs/misc/VMX_changes.txt:
- Is basically a changelog from the initial implementation of VMX in 2004.
I'm not sure about some of the other docs, but these ones seemed fairly
obvious.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
I could have sworn I did this years ago.
IIRC the need for our own copy was due to the use of io_set_eventfd which is
not present in version 0.3.106. However it is in 0.3.107 the first version of
which was uploaded to Debian in June 2008 (I can't find a better reference for
the release date).
The necessary version is available in Debian Lenny onwards and is in at least
RHEL 6, Fedora 13 and OpenSuSE 11.3. The necessary version appears to not be
available in RHEL 5 or SLES 11 which is why I haven't simply nuked the in tree
version.
This is based on tools-system-libaio.diff from the Debian packaging although I
have made it optional (but default on).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In order to read keys from xenstore, the xenstore libraries need to
write the request to the xenbus socket. This means that the socket
cannot be opened read-only.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
There's nothing architecture specific about it. It requires, however,
that x86-32's pci_conf_read32() tolerates register accesses above 255
(for consistency the adjustment is done to all pci_conf_readNN()
functions).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Linux PV on HVM guests can use vkbd, so add a vkbd frontend/backend
pair for HVM guests by default. It is useful because it doesn't
require frequent qemu wakeups as the usb keyboard/mouse does.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The FLASK security checks for resource ranges were not implemented
correctly - only the permissions on the endpoints of a range were
checked, instead of all items contained in the range. This would allow
certain resources (I/O ports, I/O memory) to be used by domains in
contravention to security policy.
This also corrects a bug where adding overlapping resource ranges did
not trigger an error.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
The flags passed to xsm_grant_mapref are the flags from the map
operation (GNTMAP_*), not status flags (GTF_*).
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Keir Fraser <keir@xen.org>
It is one of the new architectural commands supported by iommu v2.
It instructs iommu to clear all address translation and interrupt
remapping caches for all devices and all domains.
Signed-off-by: Wei Wang <wei.wang2@amd.com>
Committed-by: Keir Fraser <keir@xen.org>
Xen itself (as much as Linux) relies on this behavior, so it should
also emulate it properly. Not doing so reportedly gets in the way of
kexec inside a HVM guest.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Olaf Hering <olaf@aepfle.de>
Add cpu flag that will be checked by the iommu low level code
to skip iotlb flushes. iommu_iotlb_flush shall be called explicitly.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>