Remove xc_dominfo_t from paging_t, record only max_pages.
This value is used to setup internal data structures.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Move comment about xc_handle to the right place.
Allocate paging early and use calloc.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Catch lseek() errors.
Use -1 as return value and let caller read errno.
Remove const casts from buffer pointers, the page is writeable.
Use wrapper for write() which matches the read() prototype.
Remove unused stdarg.h inclusion.
Remove unused macro.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
v3:
- adjust arguments for xc_mem_paging_enable() failures
v2:
- move changes to file_op() to different patch
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Remove stale comment.
If a page was populated several times the vcpu is paused and
xenpaging has to unpause it again.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
In libvchan_client_init, go to the error path if the gntdev device is
not available. Otherwise, a segfault happens later as the vchan
context is invalid.
Signed-off-by: Anil Madhavapeddy <anil@recoil.org>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
The Intel GPU uses a two pages NVS region called OpRegion.
In order to get full support for the driver in the guest
we need to map this region.
This patch reserves 2 pages on the top of the memory in the
reserved area and mark this region as NVS in the e820. Then
we write the address to the config space (offset 0xfc) so the
device model can map the OpRegion at this address in the guest.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
To acknowledge the tools' setting of control/shutdown it is normal for
PV drivers to rm the key. This leads to libxl__xs_read() returning
NULL and thus a subsequent strcmp on the return value will cause a
segfault.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
24184:4ecd3615e726 missed this because I was accidentally testing with a
.config containing CONFIG_SYSTEM_LIBAIO=n. Tools tree now fully rebuilt
without this. There were no other issues.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
I could have sworn I did this years ago.
IIRC the need for our own copy was due to the use of io_set_eventfd which is
not present in version 0.3.106. However it is in 0.3.107 the first version of
which was uploaded to Debian in June 2008 (I can't find a better reference for
the release date).
The necessary version is available in Debian Lenny onwards and is in at least
RHEL 6, Fedora 13 and OpenSuSE 11.3. The necessary version appears to not be
available in RHEL 5 or SLES 11 which is why I haven't simply nuked the in tree
version.
This is based on tools-system-libaio.diff from the Debian packaging although I
have made it optional (but default on).
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
In order to read keys from xenstore, the xenstore libraries need to
write the request to the xenbus socket. This means that the socket
cannot be opened read-only.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Linux PV on HVM guests can use vkbd, so add a vkbd frontend/backend
pair for HVM guests by default. It is useful because it doesn't
require frequent qemu wakeups as the usb keyboard/mouse does.
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Change the way we relocate the memory page if they overlap with pci
hole. Use new map space (XENMAPSPACE_gmfn_range) to move the loop
into xen.
This code usually get triggered when a device is pass through to a
guest and the PCI hole has to be extended to have enough room to map
the device BARs. The PCI hole will starts lower and it might overlap
with some RAM that has been alocated for the guest. That usually
happen if the guest has more than 4G of RAM. We have to relocate
those pages in high mem otherwise they won't be accessible.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Introduce acpi_s3 and acpi_s4 configuration options (default=1). The
S3 and S4 packages are moved into separate SSDTs and their inclusion
is controlled by the new configuration options.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Since hvmloader has a xentore client, use a platform key in xenstore
to indicate whether ACPI is enabled or not rather than the shared
hvm_info_table structure.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
The layouts were actually correct, but the type names were a bit
messed up.
Original patch by Volker Eckert <volker.eckert@citrix.com>
Signed-off-by: Keir Fraser <keir@xen.org>
Incorrect register usage in the _start() wrapper caused the 64-bit
execution emulation to fail.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Committed-by: Keir Fraser <keir@xen.org>
This avoids a conflict with SeaBIOS's memory management. Moreover
there is no reason that acp_info must live below 1MB, and moving it
out actually simplifies our code.
Signed-off-by: Keir Fraser <keir@xen.org>
Parse EXTRA_INCLUDES, EXTRA_LIB, PREPEND_INCLUDES, PREPEND_LIB,
APPEND_INCLUDES, APPEND_LIB during checks, to search for required
files.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Create two new variables called APPEND_ and PREPEND_ to add compile
flags at the beginning or at the end of the search path.
Added a new semantic for user defined compile flags, here is the list
of possible options:
PREPEND_LIB: add libraries to the search path before xen
(before xen installation folders).
PREPEND_INCLUDES: add headers to the search path before xen
(before xen installation folders).
APPEND_LIB: add libraries to the search path at the end
(after all xen installation folders have been added).
APPEND_INCLUDES: add libraries to the search path at the end
(after all xen installation folders have been added).
EXTRA_INCLUDES and EXTRA_LIB can still be used, and they will have the
same effect as PREPEND_INCLUDES and PREPEND_LIB.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Bugzilla 1680: Xend fails to start if /var/lib/xend/state/*.xml are empty
which I get often when replacing the Xen hypervisor with a newer version.
This can be easily be reproduced under Fedora Core 16 by installing
xen RPMs and then replacing the xen.gz with a newer version.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Anthony Low <shinji@pikopiko.org>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Do munmap() on all mapped pages, not just the first one. Without this
change the gfns backing the remaining pages can not be paged out again
because the page count does not go down to 1. This change was missing
from changeset 23827:d1d6abc1db20.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Xen try to inforce the xsm policy when a HVMOP_track_dirty_vram
is received (xen/arch/x86/hvm/hvm.c:3637). It was failing because
in flask_hvmcontext, xsm didn't have any case for this operation.
Signed-off-by: Jean Guyader <jean.guyader@eu.citrix.com>
Committed-by: Keir Fraser <keir@xen.org>
Also move the xenstore specific code to a new function and add a
message if sscanf fails.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This function insert a PCI passthrough device in qemu.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
The integers are now "long long" in the json_object.
If a number (decimal or integer) is too big (or too low), it is stored as it in
a string. So for that, we introduce a new type JSON_NUMBER.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
This structure helps to track the return code of a callback. It's only used
between qmp_synchronous_send and qmp_send.
Now, qmp_synchronous_send will return the rc of the callback if there is no
error.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Because the function qmp_synchronous_send rely on the presence of the id
in the callback_list.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The all key is /libxl/$domid/dm-version.
The /libxl/$domid dir is created with the domain and should be only accessible
by the toolstack domain. The function libxl__xs_libxl_path() give this path.
This come with libxl__device_model_version_running() helper function.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
By setting the next string to parse after having printed any error messages.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Committed-by: Ian Jackson <ian.jackson.citrix.com>
Provide pse36 cpuid bit if guest runs in 32bit PAE
or in long mode. Hyper-V refuses to start as
the "cpu does not provide required hw features"
if it does not find the pse36 cpuid bits.
Signed-off-by: Christoph Egger <Christoph.Egger@amd.com>
Acked-by: Tim Deegan <tim@xen.org>
Committed-by: Tim Deegan <tim@xen.org>
Handle the return value of the select call inside wait_for_dev_destroy
properly, and return 0 if a device is removed, or ERROR_* if a timeout
or error happened. Use the return value of wait_for_dev_destroy inside
libxl__device_remove to properly return from that function.
Signed-off-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
grub-mkrescue internally uses xorriso, which generates a so-called
"Hybrid ISO": The ISO images also contains a DOS partition table,
which allows the identical ISO file to be stored on an USB stick for
booting from it. This breaks PyGrub, since it (wrongly) detects only
the DOS partition table and uses the first partition instead of the
complete ISO file.
Add a check to detect HybridISO files and use offset 0 in addition to
partition table parsing.
Signed-off-by: Philipp Hahn <hahn@univention.de>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Since 23915:4c4b72c94bac "" it is possible that no bus exists and this is not
an error. Removes the following spurious warning when destroying a PV domain
with no PCI devices:
libxl: error: libxl.c:759:libxl_domain_destroy: pci shutdown failed
for domid 1005
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Acked-by: Roger Pau Monne <roger.pau@entel.upc.edu>
Committed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Olaf Hering
Anil Madhavapeddy
Ian Jackson
Ian Campbell
Jean Guyader
Paul Durrant
Daniel De Graaf
Stefano Stabellini
Keir Fraser
Jan Beulich
Roger Pau Monne
Konrad Rzeszutek Wilk
Anthony PERARD
Tim Deegan
Philipp Hahn