Introduce some basic infrastructure for doing domain ID allocation unit tests,
and add a few tests that ensure correctness of the domain ID allocator.
Use <xen-tools/bitops.h> and xen/lib/find-next-bit.c in test hardness code.
Adjust find-next-bit.c to be compiled with __XEN_TOOLS__.
Signed-off-by: Denis Mukhin <dmukhin@ford.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
vpci_remove_register() only supports removing a register in a time,
but the follow-on changes need to remove all registers within a range.
So, refactor it to support removing all registers in a given region.
And it is no issue to remove a non exist register, so remove the
__must_check prefix.
Note: two test cases don't math the new logic of
vpci_remove_registers(), then modify them.
Signed-off-by: Jiqian Chen <Jiqian.Chen@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
With the appearance of Intel Sierra Forest and Granite Rapids it's now
possible to get a production x86 host with the following memory map:
SRAT: Node 0 PXM 0 [0000000000000000, 000000007fffffff]
SRAT: Node 0 PXM 0 [0000000100000000, 000000807fffffff]
SRAT: Node 1 PXM 1 [0000063e80000000, 000006be7fffffff]
SRAT: Node 2 PXM 2 [00000c7e80000000, 00000cfe7fffffff]
SRAT: Node 3 PXM 3 [000012be80000000, 0000133e7fffffff]
This is from a four socket Granite Rapids system, with each node having
512GB of memory. The total amount of RAM on the system is 2TB, but without
enabling CONFIG_BIGMEM the last range is not accessible, as it's above the
16TB boundary covered by the frame table. Sierra Forest and Granite Rapids
are socket compatible, however Sierra Forest only supports 2 socket
configurations, while Granite Rapids can go up to 8 sockets.
Note that while the memory map is very sparse, it couldn't be compressed
using the current PDX_MASK compression algorithm, which relies on all
ranges having a shared zeroed region of bits that can be removed.
The memory map presented above has the property of all regions being
similarly spaced between each other, and all having also a similar size.
Use a lookup table to store the offsets to translate from/to PFN and PDX
spaces. Such table is indexed based on the input PFN or PDX to translated.
The example PFN layout about would get compressed using the following:
PFN compression using PFN lookup table shift 29 and PDX region size 0x10000000
range 0 [0000000000000, 0x0000807ffff] PFN IDX 0 : 0000000000000
range 1 [0x00063e80000, 0x0006be7ffff] PFN IDX 3 : 0x00053e80000
range 2 [0x000c7e80000, 0x000cfe7ffff] PFN IDX 6 : 0x000a7e80000
range 3 [0x0012be80000, 0x00133e7ffff] PFN IDX 9 : 0x000fbe80000
Note how the tow ranges belonging to node 0 get merged into a single PDX
region by the compression algorithm.
The default size of lookup tables currently set in Kconfig is 64 entries,
and the example memory map consumes 10 entries. Such memory map is from a
4 socket Granite Rapids host, which in theory supports up to 8 sockets
according to Intel documentation. Assuming the layout of a 8 socket system
is similar to the 4 socket one, it would require 21 lookup table entries to
support it, way below the current default of 64 entries.
The valid range of lookup table size is currently restricted from 1 to 512
elements in Kconfig.
An extra array is used to keep track of the base PFN for each translated
range. Non used slots are set to ~0UL, so that in mfn_valid() the mfn <
base check always fails, thus reporting the mfn as invalid.
Introduce __init_or_pdx_mask and use it on some shared functions between
PDX mask and offset compression, as otherwise some code becomes unreachable
after boot if PDX offset compression is used. Mark the code as __init in
that case, so it's pruned after boot.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Otherwise Coverity complains about possibly shifting an integer more than
31 bits.
This also reverts the previous attempt to fix this Coverity reported
issue, commit 4dd3230290.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Coverity ID: 1662707
Fixes: cb50e40337 ('test/pdx: add PDX compression unit tests')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Introduce a set of unit tests for PDX compression. The unit tests contains
both real and crafted memory maps that are then compressed using the
selected PDX algorithm. Note the build system for the unit tests has been
done in a way to support adding new compression algorithms easily. That
requires generating a new test-pdx-<compress> executable that's build with
the selected PDX compression enabled.
Currently the only generated executable is test-pdx-mask that tests PDX
mask compression.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Anthony PERARD <anthony.perard@vates.tech>
Depending on the build environment, HOSTCC can be different than CC. With
the recent `install` rule addition, this would put a binary of a wrong
format in the destdir (e.g. building tests on x86 host for Arm target).
Take the opportunity to adjust the `run` rule to only run the test if
HOSTCC is CC, else print a warning message.
Fixes: 96a587a057 ("tools/tests: Add install target for vPCI")
Signed-off-by: Michal Orzel <michal.orzel@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Unlike the other tests, this is not standalone. It requires poking at a live
system, making it unweildly to use.
It also hasn't been touched in 7 years, despite changes in libraries and
kernel devices using the deprivilege infrastructure.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Anthony PERARD <anthony.perard@vates.tech>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Denis Mukhin <dmukhin@ford.com>
The Indirect Target Selection speculative vulnerability means that indirect
branches (including RETs) are unsafe when in the first half of a cacheline.
This means it's not safe for logic using the stubs to write raw 0xc3's.
Introduce place_ret() which, for now, writes a raw 0xc3 but will contain
additional logic when return thunks are in use.
stub_selftest() doesn't strictly need to be converted as they only run on
boot, but doing so gets us a partial test of place_ret() too.
No functional change.
This is part of XSA-469 / CVE-2024-28956
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
There are two originators for the PCI configuration space access:
1. The domain that owns physical host bridge: MMIO handlers are
there so we can update vPCI register handlers with the values
written by the hardware domain, e.g. physical view of the registers
vs guest's view on the configuration space.
2. Guest access to the passed through PCI devices: we need to properly
map virtual bus topology to the physical one, e.g. pass the configuration
space access to the corresponding physical devices.
Signed-off-by: Oleksandr Andrushchenko <oleksandr_andrushchenko@epam.com>
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Fix few issue with this new directory:
- clean generated files
- and ignore those generated files
- include the dependency files generated by `gcc`.
- rework prerequisites:
"test-rangeset.o" also needs the generated files "list.h" and
"rangeset.h". Technically, both only needs "harness.h" which needs
the generated headers, but that's a bit simpler and the previous
point will add the dependency on "harness.h" automatically.
This last point fix an issue where `make` might decide to build
"test-rangeset.o" before the other files are ready.
Fixes: 7bf777b42c ("tootls/tests: introduce unit tests for rangesets")
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Anthony PERARD <anthony.perard@vates.tech>
Introduce some basic infrastructure for doing rangeset unit tests, and add
a few tests that ensure correctness of rangeset subtraction.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Use of Xeon Phi features was dropped earlier on; this one was overlooked.
Fixes: 85191cf321 ("x86: drop Xeon Phi support")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In a 64bit-clean environment, blowfish fails:
make[6]: Leaving directory
'/builddir/build/BUILD/xen-4.19.1/tools/tests/x86_emulator'
In file included from /usr/include/features.h:535,
from /usr/include/bits/libc-header-start.h:33,
from /usr/include/stdint.h:26,
from
/usr/lib/gcc/x86_64-xenserver-linux/12/include/stdint.h:9,
from blowfish.c:18:
/usr/include/gnu/stubs.h:7:11: fatal error: gnu/stubs-32.h: No such
file or directory
7 | # include <gnu/stubs-32.h>
| ^~~~~~~~~~~~~~~~
compilation terminated.
make[6]: *** [testcase.mk:15: blowfish.bin] Error 1
because of lack of glibc-i386-devel or equivelent. It's non-fatal, but
reduces the content in test_x86_emulator, which we do care about running.
Instead, convert all emulator testcases to being freestanding builds, resuing
the tools/firmware/include/ headers.
This in turn requires making firmware's stdint.h compatible with 64bit builds.
We now have compiler types for every standard type we use.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This patch is preparation for making stack protector
configurable. First step is to remove -fno-stack-protector flag from
EMBEDDED_EXTRA_CFLAGS so separate components (Hypervisor in this case)
can enable/disable this feature by themselves.
Signed-off-by: Volodymyr Babchuk <volodymyr_babchuk@epam.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This is actually what the caller acquire_resource() expects on any kind
of error (the comment on top of resource_max_frames() also suggests that).
Otherwise, the caller will treat -errno as a valid value and propagate incorrect
nr_frames to the VM. As a possible consequence, a VM trying to query a resource
size of an unknown type will get the success result from the hypercall and obtain
nr_frames 4294967201.
Also, add an ASSERT_UNREACHABLE() in the default case of _acquire_resource(),
normally we won't get to this point, as an unknown type will always be rejected
earlier in resource_max_frames().
Also, update test-resource app to verify that Xen can deal with invalid
(unknown) resource type properly.
Fixes: 9244528955 ("xen/memory: Fix acquire_resource size semantics")
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-Acked-by: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Due to presumably a copy-and-paste mistake VPBROADCASTMB2Q was tested
twice instead.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The pseudo keyword fallthrough shall be used to make explicit the
fallthrough intention at the end of a case statement (doing this
using comments is deprecated).
A definition of such pseudo keyword is already present in the
Xen build. This auxiliary definition makes it available also for
for test and fuzzing harness without iterfearing with the one
that the Xen build has.
Signed-off-by: Federico Serafini <federico.serafini@bugseng.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
While result values and other status flags are unaffected as long as we
can ignore the case of registers having their upper 32 bits non-zero
outside of 64-bit mode, EFLAGS.SF may obtain a wrong value when we
mistakenly re-execute the original insn with VEX.W set.
Note that guest the memory access, if any, is correctly carried out as
32-bit regardless of VEX.W. The emulator-local memory operand will be
accessed as a 64-bit quantity, but it is pre-initialised to zero so no
internal state can leak.
Fixes: 771daacd19 ("x86emul: support BMI1 insns")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Apparently I blindly copied the constants from the BEXTR case, where SF
indeed wants leaving out. For BLSI, BLSMSK, BLSR, and BZHI SF is
defined, and hence wants checking. This is noticable in particular for
BLSR, where with the input we use SF will be set in the result (and
hence is being switched to be clear on input).
Convert to using named constants we have available, while omitting DF,
TF, as well as the MBZ bits 3 and 5 from the masking values in the
checks of the produced output. For BZHI also set SF on input, expecting
it to transition to clear.
Fixes: 771daacd19 ("x86emul: support BMI1 insns")
Fixes: 8e20924de1 ("x86emul: support BMI2 insns")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Gating the main part of what do_test() does is wrong: As it stands, the
"memory" forms of BNDC{L,N,U} weren't tested because of this mistake.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
To represent the USER-MSR bitmap access, a new segment type needs
introducing, behaving like x86_seg_none in terms of address treatment,
but behaving like a system segment for page walk purposes (implicit
supervisor-mode access).
While there also add x86_seg_none handling to the test harness'es
read() hook, as will be needed for MSR-LIST support.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Unconditionally wire this through the ->rmw() hook. Since x86_emul_rmw()
now wants to construct and invoke a stub, make stub_exn available to it
via a new field in the emulator state structure.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
msr-index.h has been in use for a while, so use the identifiers it
provides in place of raw numbers plus comments.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Drop explicit {evex} pseudo-prefixes. New gas (validly) complains when
they're used on things other than instructions. Our use was potentially
ahead of macro invocations - see simd.h's "override" macro.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
In preparation of introducing a const struct cpu_policy * local in
x86_emulate(), rename that global variable to something more suitable:
"cp" is our commonly used name for function parameters or local
variables of type struct cpu_policy *, and the present name of the
global could hence have interfered already.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Generally it is not a good idea to use BUG() in emulator code. Even for
internal flaws we're better off returning errors to callers, rather than
crashing the system. Replace the sole remaining use and remove the
test / fuzzing harness surrogate. Put in place a declaration pleasing
the compiler when finding uses in Xen headers, while at the same time
breaking the build (at linking time) in case an active reference would
newly appear.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Do as was decided in Lisbon. Reportedly Xen hasn't been working very
well on those processors anyway.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-By: Oleksii Kurochko <oleksii.kurochko@gmail.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
This target enables integration into oss-fuzz. Changing invalid input return
to -1 as values other then 0/-1 are reserved by libfuzzer. Also adding the
missing __wrap_vsnprintf wrapper which is required for successful oss-fuzz
build.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This target enables integration into oss-fuzz. Changing invalid input return
to -1 as values other then 0/-1 are reserved by libfuzzer. Also adding the
missing __wrap_vsnprintf wrapper which is required for successful oss-fuzz
build.
Signed-off-by: Tamas K Lengyel <tamas@tklengyel.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
In case a test is failing in test-xenstore, let the tool exit with an
exit status other than 0.
Fix a typo in an error message.
Reported-by: Andrew Cooper <andrew.cooper3@citrix.com>
Fixes: 3afc5e4a5b ("tools/tests: add xenstore testing framework")
Signed-off-by: Juergen Gross <jgross@suse.com>
Today test-xenstore will write nodes with 3000 bytes node data. This
size is exceeding the default quota for the allowed node size. While
working in dom0 with C-xenstored, OCAML-xenstored does not like that.
Use a size of 2000 instead, which is lower than the allowed default
node size of 2048.
Fixes: 3afc5e4a5b ("tools/tests: add xenstore testing framework")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
A TSX Abort is one option mitigate Native-BHI, but a guest kernel doesn't get
to see this if Xen has turned RTM off using MSR_TSX_{CTRL,FORCE_ABORT}.
Therefore, the meaning of RTM_ALWAYS_ABORT has been adjusted to "XBEGIN won't
fault", and it should be exposed to guests so they can make a better decision.
Expose it in the max policy for any RTM-capable system. Offer it by default
only if RTM has been disabled.
Update test-tsx to account for this new meaning. While adjusting the logic in
test_guest_policies(), take the opportunity to use feature names (now they're
available) to make the logic easier to follow.
This is part of XSA-456 / CVE-2024-2201.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Right now, test-resource always creates HVM Shadow guests. But if Xen has
SHADOW compiled out, running the test yields:
$./test-resource
XENMEM_acquire_resource tests
Test x86 PV
Created d1
Test grant table
Test x86 PVH
Skip: 95 - Operation not supported
and doesn't really test HVM guests, but doesn't fail either.
There's nothing paging-mode-specific about this test, so default to HAP if
possible and provide a more specific message if neither HAP or Shadow are
available.
As we've got physinfo to hand, also provide more specific message about the
absence of PV or HVM support.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
When re-working library call wrapping the sed invocation didn't account
for all sources living in the parent directory when building the 32-bit
harness binary.
Fixes: 6fba45ca3b ("x86emul: rework wrapping of libc functions in test and fuzzing harnesses")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Since the insns here and in particular their memory access patterns
follow the usual scheme, I didn't think it was necessary to add a
contrived test specifically for them.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Since the insns here and in particular their memory access patterns
follow the usual scheme, I didn't think it was necessary to add a
contrived test specifically for them.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Since the insns here don't access memory, I didn't think it was
necessary to extend our SHA test for them.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
These are close relatives of the AVX-VNNI and AVX-VNNI-INT8 ISA
extensions. Since the insns here and in particular their memory access
patterns follow the usual scheme (and especially the word variants of
AVX-VNNI), I didn't think it was necessary to add a contrived test
specifically for them.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Right now, all tools and hypervisor will be complied with the option
-Wdeclaration-after-statement. While most of the code in the hypervisor
is controlled by us, for tools we may import external libraries.
The build will fail if one of them are using the construct we are
trying to prevent. This is the case when building against Python 3.12
and Yocto:
| In file included from /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/Python.h:44,
| from xen/lowlevel/xc/xc.c:8:
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/object.h: In function 'Py_SIZE':
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/object.h:233:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
| 233 | PyVarObject *var_ob = _PyVarObject_CAST(ob);
| | ^~~~~~~~~~~
| In file included from /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/Python.h:53:
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/cpython/longintrepr.h: In function '_PyLong_CompactValue':
| /srv/storage/alex/yocto/build-virt/tmp/work/core2-64-poky-linux/xen-tools/4.17+stable/recipe-sysroot/usr/include/python3.12/cpython/longintrepr.h:121:5: error: ISO C90 forbids mixed declarations and code [-Werror=declaration-after-statement]
| 121 | Py_ssize_t sign = 1 - (op->long_value.lv_tag & _PyLong_SIGN_MASK);
| | ^~~~~~~~~~
| cc1: all warnings being treated as errors
Looking at the tools directory, a fair few directory already add
-Wno-declaration-after-statement to inhibit the default behavior.
We have always build the hypervisor with the flag, so for now remove
only the flag for anything but the hypervisor. We can decide at later
time whether we want to relax.
Also remove the -Wno-declaration-after-statement in some subdirectory
as the flag is now unnecessary.
Part of the commit message was take from Alexander's first proposal:
Link: https://lore.kernel.org/xen-devel/20231128174729.3880113-1-alex@linutronix.de/
Reported-by: Alexander Kanavin <alex@linutronix.de>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Tested-by: Jason Andryuk <jandryuk@gmail.com>
Signed-off-by: Julien Grall <jgrall@amazon.com>
Introduce a handler for the PCI status register, with ability to mask
the capabilities bit. The status register contains RsvdZ bits,
read-only bits, and write-1-to-clear bits. Additionally, we use RsvdP to
mask the capabilities bit. Introduce bitmasks to handle these in vPCI.
If a bit in the bitmask is set, then the special meaning applies:
ro_mask: read normal, guest write ignore (preserve on write to hardware)
rw1c_mask: read normal, write 1 to clear
rsvdp_mask: read as zero, guest write ignore (preserve on write to hardware)
rsvdz_mask: read as zero, guest write ignore (write zero to hardware)
The RO/RW1C/RsvdP/RsvdZ naming and definitions were borrowed from the
PCI Express Base 6.1 specification. RsvdP/RsvdZ bits help Xen enforce
our view of the world. Xen preserves the value of read-only bits on
write to hardware, discarding the guests write value. This is done in
case hardware wrongly implements R/O bits as R/W.
The mask_cap_list flag will be set in a follow-on change.
Signed-off-by: Stewart Hildebrand <stewart.hildebrand@amd.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Everywhere else the VL tests are grouped with the basic ones,
distinguished simply by the "form" specifiers.
No change to the generated test blobs, and hence no functional change.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Denis Mukhin