libxl_dominfo.shutdown_reason is valid iff (shutdown||dying). This is a bit
annoying when generating language bindings since it needs all sorts of special
casing. Just introduce an explicit value instead.
Signed-off-by: Ian Campbell <ian.cambell@citrix.com>
Signed-off-by: Rob Hoes <rob.hoes@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Discovered by Coverity,
CIDs 1054968 1054969 1054970 1054971 1054972 1054973 10549704
This was broken by c/s 5cc436c1d2 which did a blanket change of 'int
xc_handle' -> 'xc_interface *xch'. The types got updated, but error
conditions were left as-were. (I suspect some sed was involved originally)
Also while playing around in this area, fix up some of the bracketing style to
match the Xen coding style.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Campbell <Ian.Campbell@citrix.com>
CC: Ian Jackson <Ian.Jackson@eu.citrix.com>
CPU nodes are not required to have #address-cells == 1 and #size-cells == 0, so
don't check for that (see Linux Documentation/devicetree/booting-without-of.txt
Section III.5.a).
In some OMAP5 device, tree, these 2 properties are not correctly set. Therefore,
Xen will only able to handle 1 CPU.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
CC: andrii.anisov@globallogic.com
CC: baozich@gmail.com
It's possible to have 2 type (const and non-const) of data in the same
compilation unit. Using only __initdata will result to a compilation error:
error: $variablename causes as section tupe conflict with $variablename2
because a section containing const variables is marked read only and so cannot
contain non-const variables.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Cambell <ian.campbell@citrix.com>
CC: Jan Beulich <JBeulich@suse.com>
CC: Keir Fraser <keir@xen.org>
The commit "minios: refactor xenbus state machine" caused "/state" to
be appended to the local value of nodename. Previously the nodename
variable pointed to dev->nodename.
The xenbus_rm() calls were not updated to reflect this change, and
refer to paths that do not exist.
For example, shutdown_blkfront() for vbd 2049 would issue these calls:
xenbus_rm(XBT_NIL, "device/vbd/2049/state/ring-ref");
xenbus_rm(XBT_NIL, "device/vbd/2049/state/event-channel");
This patch restores the previous behavior, issuing these calls
instead:
xenbus_rm(XBT_NIL, "device/vbd/2049/ring-ref");
xenbus_rm(XBT_NIL, "device/vbd/2049/event-channel");
This causes frontend drivers to not be properly reset when PV-GRUB
exists. Some PV Linux drivers fail to re-initialize frontend devices
if PV-GRUB leaves them in this state.
Signed-off-by: Ben Cressey <bcressey@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[msw: adjusted commit message to include consequences, split out
changes into separate patches]
Signed-off-by: Matt Wilson <msw@amazon.com>
This patch removes cases where the error message pointer is already
NULL and is then set to NULL. These are harmless, but suggest
incorrect practice: the pointer should be passed to free() to
deallocate memory prior to reassignment. There are no functional
changes in this patch.
Signed-off-by: Ben Cressey <bcressey@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
[msw: split a larger patch from Ben into this cleanup patch]
Signed-off-by: Matt Wilson <msw@amazon.com>
This patch cleans up instances of char array allocation where string
lengths were manually counted to use strlen() instead. There are no
functional changes in this patch.
Signed-off-by: Matt Wilson <msw@amazon.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-By: Samuel Thibault <samuel.thibault@ens-lyon.org>
The char arrays used to hold xenbus paths have historically been
allocated by manually counting the length longest string constants
included in constructing the path. This has led to improperly sized
buffers, both too large (with little consequence) and too small (which
obviously causes problems). This patch corrects the instances where
the length was incorrectly calculated by using strlen() on the longest
string constant used in building a xenbus path.
A follow-on clean-up patch will change all instances to use strlen().
Signed-off-by: Ben Cressey <bcressey@amazon.com>
Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-By: Samuel Thibault <samuel.thibault@ens-lyon.org>
[msw: split this patch from a larger patch from Ben, reworked to use
strlen()]
Signed-off-by: Matt Wilson <msw@amazon.com>
This is the version from Debian Wheezy which is what both Ian Jackson and
myself run on our workstations. As committers it is useful to minimise
regeneration noise.
This is purely a run of autogen.sh. I have not tried to build the result.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com>
Tested-by: Ian Jackson <ian.jackson@citrix.com>
If this option is given don't bother building seabios ourselves.
Likely to be handy for distros who have an existing seabios
package which they want to reuse.
Signed-off-by: Fabio Fantoni <fabio.fantoni@m2r.biz>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The commit dbd1243 "xen/arm: Add helpers to use the device tree" introduced
DT_ROOT_NODE_ADDR_CELLS_DEFAULT with is used for default value when
bad copy from Linux code.
The ePAR (section 2.3.5) says: "If missing, a client program should assume a
default value of 2 for #address-cells, and a value of 1 for #size-cells."
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
This define will be use later to retrieve the correct hardware CPU ID.
Also replace hardcoded mask in arm32/head.S by this define.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
When building tools in debug mode (debug=y), pass --enable-debug when
configuring qemu-xen to enable some debug support (namely, to prevent
symbols from being stripped).
Signed-off-by: Matthew Daley <mattjd@gmail.com>
With CPUID features suitably masked this is supposed to work, but was
completely broken (i.e. the case wasn't even considered when the
original xsave save/restore code was written).
First of all, xsave_enabled() wrongly returned the value of
cpu_has_xsave, i.e. not even taking into consideration attributes of
the vCPU in question. Instead this function ought to check whether the
guest ever enabled xsave support (by writing a [non-zero] value to
XCR0). As a result of this, a vCPU's xcr0 and xcr0_accum must no longer
be initialized to XSTATE_FP_SSE (since that's a valid value a guest
could write to XCR0), and the xsave/xrstor as well as the context
switch code need to suitably account for this (by always enforcing at
least this part of the state to be saved/loaded).
This involves undoing large parts of c/s 22945:13a7d1f7f62c ("x86: add
strictly sanity check for XSAVE/XRSTOR") - we need to cleanly
distinguish between hardware capabilities and vCPU used features.
Next both HVM and PV save code needed tweaking to not always save the
full state supported by the underlying hardware, but just the parts
that the guest actually used. Similarly the restore code should bail
not just on state being restored that the hardware cannot handle, but
also on inconsistent save state (inconsistent XCR0 settings or size of
saved state not in line with XCR0).
And finally the PV extended context get/set code needs to use slightly
different logic than the HVM one, as here we can't just key off of
xsave_enabled() (i.e. avoid doing anything if a guest doesn't use
xsave) because the tools use this function to determine host
capabilities as well as read/write vCPU state. The set operation in
particular needs to be capable of cleanly dealing with input that
consists of only the xcr0 and xcr0_accum values (if they're both zero
then no further data is required).
While for things to work correctly both sides (saving _and_ restoring
host) need to run with the fixed code, afaict no breakage should occur
if either side isn't up to date (other than the breakage that this
patch attempts to fix).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Yang Zhang <yang.z.zhang@intel.com>
Acked-by: Keir Fraser <keir@xen.org>
Commit f5a54e92 ("xen: move some arch CFLAGS into the common Rules.mk")
transformed CFLAGS assignments to CFLAGS-y ones, which collides with
the was xen/arch/x86/efi/Makefile determines whether the tol chain is
usable for an EFI build. Transform the block back to using CFLAGS.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Acked-by: Keir Fraser <keir@xen.org>
Not doing this was found to cause problems with sequences of allocation
(multi-page), freeing, and then again allocation of the same page upon
boot when interrupts are still disabled (causing the owner field to be
non-zero, thus making the allocator attempt a TLB flush and, in its
processing, triggering an assertion).
Reported-by: Tomasz Wroblewski <tomasz.wroblewski@citrix.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Tomasz Wroblewski <tomasz.wroblewski@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Guest needs the ability to enable and disable MSI-X interrupts
by setting the MSI-X control bit, for a passed-through device.
Guest is allowed to write MSI-X mask bit only if Xen *thinks*
that mask is clear (interrupts enabled). If the mask is set by
Xen (interrupts disabled), writes to mask bit by the guest is
ignored.
Currently, a write to MSI-X mask bit by the guest is silently
ignored.
A likely scenario is where we have a 82599 SR-IOV nic passed
through to a guest. From the guest if you do
ifconfig <ETH_DEV> down
ifconfig <ETH_DEV> up
the interrupts remain masked. On VF reset, the mask bit is set
by the controller. At this point, Xen is not aware that mask is set.
However, interrupts are enabled by VF driver by clearing the mask
bit by writing directly to BAR3 region containing the MSI-X table.
From dom0, we can verify that
interrupts are being masked using 'xl debug-keys M'.
Initially, guest was allowed to modify MSI-X bit.
Later this behaviour was changed.
See changeset 74c213c506.
Signed-off-by: Joby Poriyath <joby.poriyath@citrix.com>
Namely with PFN compression, MMIO ranges that the firmware may need
runtime access to can live in the holes that gets shrunk/eliminated by
PFN compression, and hence no mappings would result from simply
copying Xen's direct mapping table's L3 page table entries. Build
mappings for this "manually" in the EFI runtime call 1:1 page tables.
Use the opportunity to also properly identify (via a forcibly undefined
manifest constant) all the disabled code regions associated with it not
being acceptable for us to call SetVirtualAddressMap().
Signed-off-by: Jan Beulich <jbeulich@suse.com>
- fix a bogus "test" with zero immediate
- move stuff easily/better done in C into C code
- re-arrange code paths so that no redundant GET_CURRENT() would remain
on the fast paths
- move long latency operations earlier
- slightly defer disabling global interrupts on the VM entry path
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
With the hex byte emission we were taking away a good part of
flexibility from the compiler, as for simplicity reasons these were
built using fixed operands. All half way modern build environments
would allow using the mnemonics (but we can't disable the hex variants
yet, since the binutils around at the time gcc 4.1 got released didn't
support these yet).
I didn't convert __vmread() yet because that would, just like for
__vmread_safe(), imply converting to a macro so that the output operand
can be the caller supplied variable rather than an intermediate one. As
that would require touching all invocation points of __vmread() (of
which there are quite a few), I'd first like to be certain the approach
is acceptable; the main question being whether the now conditional code
might be considered to cause future maintenance issues, and the second
being that of parameter/argument ordering (here I made __vmread_safe()
match __vmwrite(), but one could also take the position that read and
write should use the inverse order of one another, in line with the
actual instruction operands).
Additionally I was quite puzzled to find that all the asm()-s involved
here have memory clobbers - what are they needed for? Or can they be
dropped at least in some cases?
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
... at once making conditional forward jumps, which are statically
predicted to be not taken, only used for the unlikely (error) cases.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
- move stuff easily/better done in C into C code
- re-arrange code paths so that no redundant GET_CURRENT() would remain
on the fast paths
- move long latency operations earlier
- slightly defer disabling interrupts on the VM entry path
- use ENTRY() instead of open coding it
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Tim Deegan <tim@xen.org>
On some board, there is no alias to the UART. To avoid modification in
the device tree, dt-uart should also search device by path.
To distinguish an alias from a path, dt-uart will check the first character.
If it's a / then it's path, otherwise it's an alias.
Signed-off-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
The SeaBIOS ROM image may validly exceed 128k in size, it's only our
interface code that so far assumed that it wouldn't. Remove that
restriction by setting the base address depending on image size.
Add a check to HVM loader so that too big images won't result in silent
guest failure anymore.
Uncomment the intended build-time size check for rombios, moving it
into a function so that it would actually compile.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
[ported from xapi-project/blktap a79ac2c05f9 ("XOP-289: use UTC for VHD
timestamps")]
Currently, the local timezone is factored into VHD timestamps due to the
use of mktime(). This breaks "vhd-util check" for VHDs created in one
timezone and then moved westward, which results in "primary footer
invalid: creation time in future" errors.
Signed-off-by: Andrei Lifchits <andrei.lifchits@citrix.com>
Andrei no longer works for Citrix but Germano Percossi (ex-colleague of
Andrei) contacted Andrei and confirmed that
1) this work was written on Citrix time,
2) it is OK to have Andrei's SoB.
Remove unused variable "tm".
Signed-off-by: Germano Percossi <germano.percossi@citrix.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
There are some disk formats commonly supported by both qdisk and blktap.
As qdisk is better supported and blktap is unmaintained, we choose qdisk
over blktap whenever possible.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
A file descriptor leak was detected after creating multiple domUs with
pass-through PCI devices. This patch fixes the issue.
Signed-off-by: Xi Xiong <xixiong@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
Newer PCI standards (e.g., PCI-X 2.0 and PCIe) introduce extended
configuration space which is larger than 256 bytes. This patch uses
stat() to determine the amount of space used to correctly save all of
the PCI configuration space. Resets handled by the xen-pciback driver
don't have this problem, as that code correctly handles saving
extended configuration space.
Signed-off-by: Steven Noonan <snoonan@amazon.com>
Reviewed-by: Matt Wilson <msw@amazon.com>
[msw: adjusted commit message]
Signed-off-by: Matt Wilson <msw@amazon.com>
Although we do not support hardware flow control in the Xen driver
for the PL011 UART, the other end may be configured to use it.
In this case it waits in vain for the RTS signal to be asserted by
the host and will never transmit any characters.
So we leave RTS and DTR as they had been setup before.
This fixes the UART input on Calxeda Midway, which uses hardware
flow control for the serial-over-LAN functionality.
Signed-off-by: Andre Przywara <andre.przywara@linaro.org>
Acked-by: Ian Campbell <ian.campbell@citrix.com>
Spotted because it breaks the clang build for LLVM <3.2. .ifnes is
not right here as it will choke on a string with embedded quotes.
.ifnb would be better except that LLVM <3.2 doesn't support that either
(and nor does binutils 2.16).
It should be possible to use something like !!msg or !!msg[0] instead
of a separate flag, but I gave up trying to find something that would
make it through CPP, asm() and gas as a usable constant. :|
Signed-off-by: Tim Deegan <tim@xen.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Allow mwait_idle to utilize C8, C9, C10 when they are present on...
"Fourth Generation Intel(R) Core(TM) Processors", which are based on
Intel(R) microarchitecture code name Haswell.
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Here we disable HW promotion of C1 to C1E and export both C1 and C1E
as distinct C-states.
This allows a cpuidle governor to choose a lower latency C-state than
C1E when necessary to satisfy performance and QOS constraints -- and
still save power versus polling.
This also corrects the erroneous latency previously reported for C1E
-- it is 10usec, not 1usec.
Signed-off-by: Len Brown <len.brown@intel.com>
Avoided the effect of changing the meaning of "max_cstate=".
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Remove the assumption that cstate_tables are indexed by MWAIT flag
values. Each entry identifies itself via its own flags value. This
change is needed to support multiple states that share the same MWAIT
flags.
Note that this can have an effect on what state is described by 'N' on
cmdline max_cstate=N on some systems.
Signed-off-by: Len Brown <len.brown@intel.com>
Avoided the effect of changing the meaning of "max_cstate=".
Drop MWAIT_MAX_NUM_CSTATES (done differently in a prior patch on
Linux).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
- properly validate available feature set on APs
- also validate xsaveopt availability on APs
- properly indicate whether the initialization is on the BSP (we
shouldn't be using "cpu == 0" checks for this)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Nothing defines CONFIG_X86_INTEL_USERCOPY, and as far as I can tell it
was never used even when Xen supported 32-bit x86.
Signed-off-by: Matt Wilson <msw@amazon.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The DMI checks that force the use of the bigsmp APIC driver are for
systems that are no longer supported by Xen (32-bit x86).
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Keir Fraser <keir@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The BIOS reboot option was never implemented for x86_64, and retaining
it is somewhat false advertising.
Signed-off-by: Matt Wilson <msw@amazon.com>
Acked-by: Keir Fraser <keir@xen.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The old code for OEM SMBios strings was:
char path[20] = "bios-strings/oem-XX";
path[(sizeof path) - 3] = '0' + ((i < 10) ? i : i / 10);
path[(sizeof path) - 2] = (i < 10) ? '\0' : '0' + (i % 10);
Where oem-1 thru 9 specifically had no leading 0.
However, the definition of HVM_XS_OEM_STRINGS specifically requires leading
0s.
This regression was introduced by the combination of c/s 4d23036e70 and
e64c3f71ce
I realise that this patch causes a change to the public headers. However I
feel it is justified as:
* All toolstacks used to have to embed the magic string (and almost certainly
still do)
* If by some miriacle a new toolstack has started using the new define will
continue to work.
* The only intree consumer of the define is hvmloader itself.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
Fixes regression indirectly introduced by c/s 4d23036e70
That changeset added some smbios tables which were option based on the
toolstack providing appropriate xenstore keys. The do_struct() macro would
unconditionally increment nr_structs, even if a table was not actually
written.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Keir Fraser <keir@xen.org>
With there being so many systems with broken ACPI tables, and with it
generally being known what's wrong with those tables, give people a
handle to overcome the resulting disabling of their IOMMUs.
Inspired by Linux side patches providing similar functionality.
Suggested-by: Sander Eikelenboom <linux@eikelenboom.it>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-By: Sander Eikelenboom <linux@eikelenboom.it>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Suravee Suthikulpanit <suravee.suthikulapanit@amd.com>
For one we shouldn't accept IVHD tables specifying IO-APIC IDs beyond
the limit we support (MAX_IO_APICS, currently 128).
And then we shouldn't memset() a pointer allocation of which failed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Suravee Suthikulpanit <suravee.suthikulapanit@amd.com>
- we used the C4/C5 (first prefix) byte instead of the apparent ModR/M
one as the second prefix byte
- early decoding normalized vex.reg, thus corrupting it for the main
consumer (copy_REX_VEX()), resulting in #UD on the two-operand
instructions we emulate
Also add respective test cases to the testing utility plus
- fix get_fpu() (the fall-through order was inverted)
- add cpu_has_avx2, even if it's currently unused (as in the new test
cases I decided to refrain from using AVX2 instructions in order to
be able to actually run all the tests on the hardware I have)
- slightly tweak cpu_has_avx to more consistently express the outputs
we don't care about (sinking them all into the same variable)
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Keir Fraser <keir@xen.org>
Rob Hoes
Andrew Cooper
Julien Grall
Ben Cressey
Matt Wilson
Ian Campbell
Fabio Fantoni
Matthew Daley
Olaf Hering
Jan Beulich
Joby Poriyath
Wei Liu
Xi Xiong
Steven Noonan
Andre Przywara
Tim Deegan
Len Brown