After rombios transfers the data for a write, it checks the status and
fails if BSY is set. qemu-trad doesn't set BSY for PIO writes, but QEMU
upstream does, and this causes rombios to fail writes because they are
marked as BSY. Instead, wait for BSY to clear after a write.
INT 13 writes are probably rarely used these days, but they are used by
GRUB 2 to write to its environment file which happens by default on
Ubuntu.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
The condition: if there is a space in the ring then wait for the producer
to fill the ring also evaluates to true even if the ring if full. It
leads to a deadlock where producer is waiting for consumer
to consume the items and consumer is waiting for producer to fill the ring.
Fix for the issue: check if the ring is full and then break from
the loop to consume the items from the ring.
eg. case: prod = 1272, cons = 248.
Signed-off-by: Anshul Makkar <anshul.makkar@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
First of all limit the memory range used for testing to 4Mb: There's no
point placing page tables right above 8Mb when they can equally well
live at the bottom of the chunk at 4Mb - rep_io_test() cares about the
5Mb...7Mb range only anyway. In a subsequent patch this will then also
allow simply looking for an unused 4Mb range (instead of using a build
time determined one).
Extend the "skip tests" condition beyond the "is there enough memory"
question.
Reported-by: Charles Arnold <carnold@suse.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Tested-by: Gary Lin <glin@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Release-acked-by: Julien Grall <julien.grall@arm.com>
The use of seabios defconfig kills boot performance of Windows guests
because the default is for the int13 handler to use PIO when accessing
the emulated IDE device.
By instead using a canned configuration with the ATA settings overridden
to enable DMA access (and also wider PIO) boot performance is markedly
improved without the need to use a different (and possibly not supported)
device model.
This patch adds the canned configuration into tools/firmware and modifies
the Makefile rule to copy it into place.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
The present way of setting this up is flawed: Leaving the I/O bitmap
pointer at zero means that the interrupt redirection bitmap lives
outside (ahead of) the allocated space of the TSS. Similarly setting a
TSS limit of 255 when only 128 bytes get allocated means that 128 extra
bytes may be accessed by the CPU during I/O port access processing.
Introduce a new HVM param to set the allocated size of the TSS, and
have the hypervisor actually take care of setting namely the I/O bitmap
pointer. Both this and the segment limit now take the allocated size
into account.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Tim Deegan <tim@xen.org>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
At the moment this flag is unconditionally set for PVHv2 domains. Note that
using this boot flag requires that the FADT table revision is at least 5.
Reported-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Update the structure of the FADT table to version 5, and use that version for
PVHv2 guests. Note that HVM guests will continue to use FADT 4. In order to do
this, add a new field to acpi_config that contains the ACPI revision to use by
libacpi. Note that currently this only applies to the FADT.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
There is no reason to build, for example, dsdt_pvh.asl for hvmloader. We
pass which DSDTs to build via DSDT_FILES parameter.
If DSDT_FILES is empty all DSDTs for a particular architecture will be built.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
We now have permission from Lenovo to relicense commit 801d469ad8
("[HVM] ACPI support patch 3 of 4: ACPI _PRT table") to LGPLv2.1
This essentially means reverting commits c3397311a6 ("acpi: Prevent
GPL-only code from seeping into non-GPL binaries") and 26c4f0b8a4
("tools/libacpi: fix sed usage")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Ken Lancaster <klancaster@lenovo.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The current commit in tree is rather old. It has come to a point that
cherry-picking commits from upstream isn't trivial anymore.
There is long term plan to track ipxe upstream, but for 4.8 release, we
should just update ipxe to a newer commit (they are using rolling
release model now).
Forward-port the one boot prompt patch that is still relevant and retire
the rest which are already in upstream.
Reported-by: Juergen Schinker <ba1020@homie.homelinux.net>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
In prepearation to moving acpi sources into generally available
libacpi:
1. Pass IOAPIC/LAPIC/PCI mask values via struct acpi_config
2. Modify include files search paths to point to acpi directory
3. Macro-ise include file for build.c that defines various
utilities used by that file. Users of libacpi will be expected
to define this macro when compiling build.c
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
ACPI sources will be available to various component which will build
them according to their own rules. ACPI's Makefile will only generate
necessary source files.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Non-hvmloader users may be building tables in virtual address space
and therefore we need to make sure that values that end up in tables
are physical addresses.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Components that wish to use ACPI builder will need to provide their own
mem_alloc() and virt_to_phys() routines. Pointers to these routines will
be passed to the builder as memory ops.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
ACPI builder is currently distributed under GPLv2 license.
We plan to make the builder available to components other than the
hvmloader (which is also GPLv2). Some of these components (such as
libxl) may be distributed under LGPL-2.1 so that they can be used by
non-GPLv2 callers. But this will not be possible if we incorporate
the ACPI builder in those other components.
To avoid this problem we are relicensing sources in ACPI bulder
directory to the Lesser GNU Public License (LGPL) version 2.1
gpl/mk_dsdt_asl.sh file will remain GPL-only pending permission to
relicense from Lenovo due to commit 801d469ad ("[HVM] ACPI support
patch 3 of 4: ACPI _PRT table."))
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Daniel Kiper <dkiper@net-space.pl>
Acked-by: Stefan Berger <stefanb@us.ibm.com>
Acked-by: Kouya Shimura <kouya@jp.fujitsu.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Kevin Tian <kevin.tian@intel.com>
Acked-by: Keir Fraser <keir@xen.org>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Lars Kurth <lars.kurth@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [for Oracle, VirtualIron and Sun contributions]
Some code (specifically, introduced by commit 801d469ad ("[HVM] ACPI
support patch 3 of 4: ACPI _PRT table.")) has only been licensed under
GPLv2. We want to prevent this code from showing up in non-GPL
binaries which might become possible after we make ACPI builder code
available to users other than hvmloader.
There are two pieces that we need to be careful about:
(1) A small chunk of code in dsdt.asl that implements _PIC method
(2) A chunk of ASL generator in mk_dsdt.c that describes with PCI
interrupt routing.
This code will now be generated by a GPL-only script which will be
invoked only when ACPI builder's Makefile is called with GPL variable
set.
We also strip license header from generated ASL files to prevent
inadverent use of those files with incorrect license.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This code will be needed by PVH guests who don't want to use full DSDT.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Intermediate stages of building a target should be made with
temporary files that are copied to final target in the end.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
3a7f872a ("tools: lift BUILD_BUG_ON to a tools header file") was taken
out from an rather old half finished branch by dropping unrelated
changes. Unfortunately two issues sneaked in.
1. Hvmloader should be standalone. Revert the changes to hvmloader.
2. The define guard in libs.h was erroneously deleted. Add that back.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Only define BUILD_BUG_ON when there isn't one already, because mini-os
currently leaks that.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Coverity complains:
overflow_before_widen: Potentially overflowing expression
info->nr_modules * 32U with type unsigned int (32 bits, unsigned) is
evaluated using 32-bit arithmetic, and then used in a context that
expects an expression of type uint64_t (64 bits, unsigned).
The overflow is unlikely to happen in reality because we only expect a
few modules.
Fix that by converting the check to use bound checking to placate
Coverity.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
The original code used sizeof(info->signature) as the size parameter for
memcpy, which was wrong.
Fix that by using structure assignment.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
... to compile SeaBIOS and OVMF. Only depend on CONFIG_*.
If --with-system-* configure option is used, then set *_CONFIG=n to not
compile SEABIOS and OVMF.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
All BIOSes but ROMBIOS needs to be loaded via modules.
ROMBIOS is handled as a special case.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
... and do not include the SeaBIOS ROM into hvmloader anymore.
This also fix the dependency on roms.inc, hvmloader.o does not include it.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The BIOS blob can be found an entry called "firmware" of the modlist of
the hvm_start_info struct.
The found BIOS blob is not loaded by this patch, but only passed as
argument to bios_load() function.
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
We'd need to update other routines' definitions. However, acpi_config
is not really a const since new_vm_gid() wants to update
acpi_config.vm_gid_addr.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Initialize it in hvmloader, avoiding ACPI code's use of xenstore_read()
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
This way ACPI code won't use xenstore-read() and hvm_param_set()
which are private to hvmloader.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Ross Lagerwall
Wei Liu
Jan Beulich
Anshul Makkar
Paul Durrant
Roger Pau Monne
Boris Ostrovsky
Anthony PERARD