An XSM hook for get_dom0_console is currently missing. Using XSM with
a PVH dom0 shows:
(XEN) FLASK: Denying unknown platform_op: 64.
Wire up the hook, and allow it for dom0.
Fixes: 4dd160583c ("x86/platform: introduce hypercall to get initial video console settings")
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Acked-by: Daniel P. Smith <dpsmith@apertussolutions.com>
The current flow for initial SID assignment is that the function
flask_domain_alloc_security() allocates the security context and assigns an
initial SID based on the limited state information it can access. Specifically
the initial SID is determined by the domid of the domain, where it would assign
the label for one of the domains the hypervisor constructed with the exception
of initial domain (dom0). In the case of the initial domain and all other
domains it would use the unlabeled_t SID.
When it came to the SID for the initial domain, its assignment was managed by
flask_domain_create() where it would be switched from unlabeled_t to dom0_t.
This logic worked under the assumption that the first call to
flask_domain_create() would be the hypervisor constructing the initial domain.
After which it would be the toolstack constructing the domain, for which it is
expected to provide an appropriate SID or else unlabeled_t would be used.
The issue is that the assumptions upon which the current flow is built were
weak and are invalid for PV shim and dom0less. Under the current flow even
though the initial domain for PV shim is not set as privileged, flask would
label the domain as dom0_t. For dom0less, the situation is two-fold. First is
that every domain after the first domain creation will fail as they will be
labeled as unlabeled_t. The second is that if the dom0less configuration does
not include a "dom0", the first domain created would be labeled as dom0_t.
This commit only seeks to address the situation for PV shim, by including a
check for xenboot_t context in flask_domain_alloc_security() to determine if
the domain is being constructed at system boot. Then a check for is_privilged
and pv_shim is added to differentiate between a "dom0" initial domain and a PV
shim initial domain.
The logic for flask_domain_create() was altered to allow the incoming SID to
override the initial label. This allows a domain builder, whether it is a
toolstack, dom0less, or hyperlaunch, to provide the correct label for the
domain at construction.
The base policy was adjusted to allow the idle domain under the xenboot_t
context the ability to construct domains of both types, dom0_t and domu_t.
This will enable a hypervisor resident domain builder to construct domains
beyond the initial domain,
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
This commit implements full support for starting the idle domain privileged by
introducing a new flask label xenboot_t which the idle domain is labeled with
at creation. It then provides the implementation for the XSM hook
xsm_set_system_active to relabel the idle domain to the existing xen_t flask
label.
In the reference flask policy a new macro, xen_build_domain(target), is
introduced for creating policies for dom0less/hyperlaunch allowing the
hypervisor to create and assign the necessary resources for domain
construction.
Signed-off-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Jason Andryuk <jandryuk@gmail.com>
Reviewed-by: Luca Fancellu <luca.fancellu@arm.com>
Tested-by: Luca Fancellu <luca.fancellu@arm.com>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Tested-by: Rahul Singh <rahul.singh@arm.com>
Running $(MAKE) like that in a $(shell ) while parsing the Makefile
doesn't work reliably. In some case, make will complain with
"jobserver unavailable: using -j1. Add '+' to parent make rule.".
Also, it isn't possible to distinguish between the output produced by
the target "xenversion" and `make`'s own output.
Instead of running make, this patch "improve" `version.sh` to try to
guess the output of `make xenversion`.
In order to have version.sh works in more scenario, it will use
XEN_EXTRAVERSION and XEN_VENDORVERSION from the environment when
present. As for the cases were those two variables are overridden by a
make command line arguments, we export them when invoking version.sh
via a new $(XEN_FULLVERSION) macro.
That should hopefully get us to having ./version.sh returning the same
value that `make xenversion` would.
This fix GitLab CI's build job "debian-unstable-gcc-arm64".
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Reviewed-by: Daniel P. Smith <dpsmith@apertussolutions.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
The functionality of XEN_SYSCTL_set_parameter is available via hypfs
now, so it can be removed.
This allows to remove the kernel_param structure for runtime parameters
by putting the now only used structure element into the hypfs node
structure of the runtime parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Add the infrastructure for the hypervisor filesystem.
This includes the hypercall interface and the base functions for
entry creation, deletion and modification.
In order not to have to repeat the same pattern multiple times in case
adding a new node should BUG_ON() failure, the helpers for adding a
node (hypfs_add_dir() and hypfs_add_leaf()) get a nofault parameter
causing the BUG() in case of a failure.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <jgrall@amazon.com>
With the final users moved over to using XEN_DOMCTL_set_cpumsr_policy, drop
this domctl and associated infrastructure.
Rename the preexisting set_cpuid XSM vector to set_cpu_policy, now that it is
back to having a single user.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This patch removes all tmem related code and CONFIG_TMEM from the
hypervisor. Also remove tmem hypercalls from the default XSM policy.
It is written as if tmem is disabled and tmem freeable pages is 0.
We will need to keep public/tmem.h around forever to avoid breaking
guests. Remove the hypervisor only part and put guest visible part
under a xen version check. Take the chance to remove trailing
whitespaces.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Will inhibit initialization of the domain's argo data structure to
prevent receiving any messages or notifications and access to any of
the argo hypercall operations.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Chris Patterson <pattersonc@ainfosec.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
XSM controls for argo ring registration with two distinct cases, where
the ring being registered is:
1) Single source: registering a ring for communication to receive messages
from a specified single other domain.
Default policy: allow.
2) Any source: registering a ring for communication to receive messages
from any, or all, other domains (ie. wildcard).
Default policy: deny, with runtime policy configuration via bootparam.
This commit modifies the signature of core XSM hook functions in order to
apply 'const' to arguments, needed in order for 'const' to be accepted in
signature of functions that invoke them.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Chris Patterson <pattersonc@ainfosec.com>
Release-acked-by: Juergen Gross <jgross@suse.com>
This finally (after literally years of work!) marks the point where the
toolstack can ask the hypervisor for the current CPUID configuration of a
specific domain.
Introduce a new flask access vector and update the default policies.
Also extend xen-cpuid's --policy mode to be able to take a domid and dump a
specific domains CPUID and MSR policy.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Sergey Dyasli <sergey.dyasli@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Now that XEN_DOMCTL_createdomain handles the grant table limits, remove
XEN_DOMCTL_set_gnttab_limits (including XSM hooks and libxc wrappers).
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
set_max_evtchn is somewhat weird. It was introduced with the event_fifo work,
but has never been used. Still, it is a bounding on resources consumed by the
event channel infrastructure, and should be part of createdomain, rather than
editable after the fact.
Drop XEN_DOMCTL_set_max_evtchn completely (including XSM hooks and libxc
wrappers), and retain the functionality in XEN_DOMCTL_createdomain.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Christian Lindig <christian.lindig@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Certain memory resources associated with a guest are not necessarily
present in the guest P2M.
This patch adds the boilerplate for new memory op to allow such a resource
to be priv-mapped directly, by either a PV or HVM tools domain.
NOTE: Whilst the new op is not intrinsically specific to the x86 architecture,
I have no means to test it on an ARM platform and so cannot verify
that it functions correctly.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Julien Grall <julien.grall@arm.com>
Remove the implementation of XEN_DOMCTL_pin_mem_cacheattr since it has
been replaced by a dmop. Change xc_domain_pin_memory_cacheattr() so
that it is only defined when XC_WANT_COMPAT_DEVICEMODEL_API is set and
have it call the new dmop. Leave the definitions of
XEN_DOMCTL_MEM_CACHEATTR_* since they are still used by QEMU.
Signed-off-by: Ross Lagerwall <ross.lagerwall@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
This patch renames PSR sysctl/domctl interfaces and related xsm policy to
make them be general for all resource allocation features but not only
for CAT. Then, we can resuse the interfaces for all allocation features.
Basically, it changes 'psr_cat_op' to 'psr_alloc', and remove 'CAT_' from some
macros. E.g.:
1. psr_cat_op -> psr_alloc
2. XEN_DOMCTL_psr_cat_op -> XEN_DOMCTL_psr_alloc
3. XEN_SYSCTL_psr_cat_op -> XEN_SYSCTL_psr_alloc
4. XEN_DOMCTL_PSR_CAT_SET_L3_CBM -> XEN_DOMCTL_PSR_SET_L3_CBM
5. XEN_SYSCTL_PSR_CAT_get_l3_info -> XEN_SYSCTL_PSR_get_l3_info
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Add a sysctl hypercall to support setting parameters similar to
command line parameters, but at runtime. The parameters to set are
specified as a string, just like the boot parameters.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Isolation of devices passed through to domains usually requires an
active IOMMU. The existing method of requiring an IOMMU is via a Xen
boot parameter ("iommu=force") which will abort boot if an IOMMU is not
available.
More graceful degradation of behaviour when an IOMMU is absent can be
achieved by enabling XSM to perform enforcement of IOMMU requirement.
This patch enables an enforceable XSM policy to specify that an IOMMU is
required for particular domains to access devices and how capable that
IOMMU must be. This allows a Xen system to boot whilst still
ensuring that an IOMMU is active before permitting device use.
Using a XSM policy ensures that the isolation properties remain enforced
even when the large, complex toolstack software changes.
For some hardware platforms interrupt remapping is a strict requirement
for secure isolation. Not all IOMMUs provide interrupt remapping.
The XSM policy can now optionally require interrupt remapping.
The device use hooks now check whether an IOMMU is:
* Active and securely isolating:
-- current criteria for this is that interrupt remapping is ok
* Active but interrupt remapping is not available
* Not active
This patch also updates the reference XSM policy to use the new
primitives, with policy entries that do not require an active IOMMU.
Signed-off-by: Christopher Clark <christopher.clark6@baesystems.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Ross Philipson <ross.philipson@gmail.com>
Running "make uninstall" does not remove all installed files, a
situation which might cause link related issues if xen is re-installed
in a different location.
In order to make uninstall correctly remove the files it is best
the process should be done recursively by mirroring each "install"
target with an "uninstall" who removes the installed files.
An exception to this rule is uninstalling the files produced by
"qemu-xen-dir-remote" and "qemu-xen-traditional-dir", which are external
to the project. These projects do not implement an "uninstall" target so
the files have to be removed manually.
Signed-off-by: Petre Pircalabu <ppircalabu@bitdefender.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
c/s 524a98c2ac "public / x86: introduce __HYPERCALL_dm_op" gave flask
permisisons for a stubdomain to use dmops, but omitted the case of a device
model running in dom0.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Tested-by: Paul Durrant <paul.durrant@citrix.com>
In 58cbc034 send_irq permission was removed but there was still
reference to it in policy file. Remove the stale reference.
And now we also need dm permission. Add that.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Paul Durrant <paul.durrant@citrix.com>
xsm/build: Further build fixes following the DMop series
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
NOTE: This patch also modifies the types of the 'vector', 'type' and
'insn_len' arguments of xc_hvm_inject_trap() from uint32_t to
uint8_t. In practice the values passed were always truncated to
8 bits.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
... HVMOP_set_pci_link_route
These HVMOPs were exposed to guests so their definitions need to be
preserved for compatibility. This patch therefore updates
__XEN_LATEST_INTERFACE_VERSION__ to 0x00040900 and makes the HVMOP
defintions conditional on __XEN_INTERFACE_VERSION__ less than that value.
NOTE: This patch also widens the 'domain' parameter of
xc_hvm_set_pci_intx_level() from a uint8_t to a uint16_t.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
The handle type passed to the underlying shadow and hap functions is
changed for compatibility with the new hypercall buffer.
NOTE: This patch also modifies the type of the 'nr' parameter of
xc_hvm_track_dirty_vram() from uint64_t to uint32_t. In practice
the value passed was always truncated to 32 bits.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: George Dunlap <george.dunlap@eu.citrix.com>
Acked-by: Tim Deegan <tim@xen.org>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
...as a set of hypercalls to be used by a device model.
As stated in the new docs/designs/dm_op.markdown:
"The aim of DMOP is to prevent a compromised device model from
compromising domains other then the one it is associated with. (And is
therefore likely already compromised)."
See that file for further information.
This patch simply adds the boilerplate for the hypercall.
Signed-off-by: Paul Durrant <paul.durrant@citrix.com>
Suggested-by: Ian Jackson <ian.jackson@citrix.com>
Suggested-by: Jennifer Herbert <jennifer.herbert@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Add two missing allow rules:
1. Device model domain construction uses getvcpucontext, discovered by
Andrew Cooper while chasing an unrelated issue.
2. When a domain is destroyed with a device passthrough active, the
calls to remove_{irq,ioport,iomem} can be made by the hypervisor itself
(which results in an XSM check with the source xen_t). It does not make
sense to deny these permissions; no domain should be using xen_t, and
forbidding the hypervisor from performing cleanup is not useful.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
The flask policy can be build twice -- one for hypervisor and one for
tools.
Before this patch, everything is built inside tools/flask/policy
directory. It is possible to have a race to write to the same output
file when running parallel builds.
Prepend output file names with FLASK_BUILD_DIR. Hypervisor and tools
build will set that variable to different directories, so that we can
be safe from races.
Adjust other bits of the build system as needed.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Qemu needs access to this for the domain it controls, both due to it
being used by xc_domain_memory_mapping() (which qemu calls) and the
explicit use in hw/xenpv/xen_domainbuild.c:xen_domain_poll(). Extend
permissions to that of any "ordinary" domctl: A domain controlling the
targeted domain can invoke this operation for that target domain (which
is being achieved by no longer passing NULL to xsm_domctl()).
This at once avoids a for_each_domain() loop when the ID of an
existing domain gets passed in.
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Starting from 08cffe66 ("xsm: add a default policy to .init.data") we
can attach a xsm policy blob to hypervisor. To build that policy blob
now hypervisor build system needs to enter tools directory.
The expectation for hypervisor and tools build systems is different. We
don't want xen build system to depend on configure but we want tools
build system to. That commit broke this expectation because it required
users to run configure before building hypervisor. This broke ARM build
because ARM developers normally build hypervisor and tools separately
(and possibly on different platforms). It can also break x86 if
developers don't run configure before building hypervisor with XSM on.
To fix it, move major part of tools/flask/policy/Makefile into
Makefile.common and create tools only Makefile to include that common
Makefile. Hypervisor Makefile will use Makefile.common to build xsm
policy.
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Tested-by: Julien Grall <julien.grall@arm.com>
Access to setpodtarget and getpodtarget is required by dom0 to set the balloon
targets for domU. The patch gives source domain (dom0) access to set
this target for domU and resolve the following permission denied erro
message during ballooning :
avc: denied { setpodtarget } for domid=0 target=9
scontext=system_u:system_r:dom0_t
tcontext=system_u:system_r:domU_t tclass=domain
Signed-off-by: Anshul Makkar <anshul.makkar@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
This patch resolves the following permission denied scenarios while creating
new domU :
avc: denied { setdomainhandle } for domid=0 target=1
scontext=system_u:system_r:dom0_t tcontext=system_u:system_r:domU_t tclass=domain
avc: denied { settime } for domid=0 target=1 scontext=system_u:system_r:dom0_t
tcontext=system_u:system_r:domU_t tclass=domain
Signed-off-by: Anshul Makkar <anshul.makkar@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
This operation has no known users, and is primarily useful when an MLS
policy is in use (which has never been shipped with Xen). In addition,
the information it provides does not actually depend on hypervisor
state (only on the XSM policy), so an application that needs it could
compute the results without needing to involve the hypervisor.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
These permissions were initially split because they were in separate
domctls, but this split is very unlikely to actually provide security
benefits: it would require a carefully contrived situation for a domain
to both need access to one type of CPU register and also need to be
prohibited from accessing another type.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
This adds the xenstore_t type to the example policy for use by a
xenstore stub domain; see the init-xenstore-domain tool for how this
type needs to be used.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
This also renames the example users created by vm_role.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
When the all_system_role module is enabled, any domain type can be
created using the system_r role, which was the default. When it is
disabled, domains not using the default types (dom0_t and domU_t) must
use another role such as vm_r.
Signed-off-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Doug Goldstein <cardoe@cardoe.com>
Specifically:
s/\.xsplice/\.livepatch/
s/XSPLICE/LIVEPATCH/
s/xsplice/livepatch/
s/livepatch_patch_func/livepatch_func/
s/xSplice/Xen Live Patch/
s/livepatching/livepatch/
s/arch_livepatch_enter/arch_livepatch_quiesce/
s/arch_livepatch_exit/arch_livepatch_revive/
And then modify some of the function arguments
to have two more characters.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
If the hypervisor was built with build-ids we can expose the
build-id value to the toolstack (if it is not built with
it will just return -ENODATA). This is a priviligied operation
so only the controlling stack is able to request this.
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Acked-by: Daniel De Graaf <dgdegra@tycho.nsa.gov>
Acked-by: Jan Beulich <jbeulich@suse.com>
Release-acked-by: Wei Liu <wei.liu2@citrix.com>
Jason Andryuk
Andrew Cooper
Daniel P. Smith
Anthony PERARD
Juergen Gross
Wei Liu
Christopher Clark
Daniel De Graaf
Sergey Dyasli
Paul Durrant
Ross Lagerwall
Yi Sun
Christopher Clark
Petre Pircalabu
Anshul Makkar
Jan Beulich
Konrad Rzeszutek Wilk