Add CPUID/MSR enumeration details for Processor Trace. For now, we will only
support its use inside VMX operation. Fill in the vmtrace_available boolean
to activate the newly introduced common infrastructure for allocating trace
buffers.
For now, Processor Trace is going to be operated in Single Output mode behind
the guests back. Add the MSRs to struct vcpu_msrs, and set up the buffer
limit in vmx_init_ipt() as it is fixed for the lifetime of the domain.
Context switch the most of the MSRs in and out of vCPU context, but the main
control register needs to reside in the MSR load/save lists. Explicitly pull
the msrs pointer out into a local variable, because the optimiser cannot keep
it live across the memory clobbers in the MSR accesses.
Signed-off-by: Michał Leszczyński <michal.leszczynski@cert.pl>
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
It is not permitted to edit the VERS clause for a version in a release of Xen.
Revert xendevicemodel_set_irq_level()'s inclusion in .so.1.2 and bump the the
library minor version to .so.1.4 instead.
Fixes: 5d752df85f ("xen/dm: Introduce xendevicemodel_set_irq_level DM op")
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
Simplify the FreeBSD and Linux logic, left in this state by the previous
change. No functional change.
Duplicate the FreeBSD logic for NetBSD, to maintain the uniform ABI for
callers that EOPNOTSUPP covers all Xen/Kernel support.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
These log lines are all in response to single system calls, and do not provide
any information which the immediate caller can't determine themselves. It is
however rude to put junk like this onto stderr, especially as system call
failures are not even error conditions in certain circumstances.
The FreeBSD logging has stale function names in, and Solaris shouldn't have
passed code review to start with.
No functional change.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Ian Jackson <iwj@xenproject.org>
Release-Acked-by: Ian Jackson <iwj@xenproject.org>
We're about to introduce support for Intel Processor Trace, but similar
functionality exists in other platforms.
Aspects of vmtrace can reasonably can be common, so start with
XEN_SYSCTL_PHYSCAP_vmtrace and plumb the signal from Xen all the way down into
`xl info`.
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
On NetBSD, PTHREAD_STACK_MIN is not available.
If PTHREAD_STACK_MIN is not defined, define it to 0 so that we fallback to
DEFAULT_THREAD_STACKSIZE
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Pass bridge name to qemu as command line option
When starting qemu, set an environnement variable XEN_DOMAIN_ID,
to be used by qemu helper scripts
The only functional difference of using the br parameter is that the
bridge name gets passed to the QEMU script.
NetBSD doesn't have the ioctl to rename network interfaces implemented, and
thus cannot rename the interface from tapX to vifX.Y-emu. Only qemu knowns
the tap interface name, so we need to use the qemu script from qemu itself.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
NetBSD doesn't have setresuid(). introcuce libxl__setresuid(),
which on NetBSD assert() that it's never called (it should not be called when
dm restriction is off, and NetBSD doesn't support dm restriction at
this time).
On linux and FreeBSD it just calls setresuid().
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
NetBSD uses the same uuid library as FreeBSD. As this is in a
__FreeBSD__ || __NetBSD__ block, just drop the #ifdef __FreeBSD__
and dead code.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Don't assume tv_sec is a unsigned long, it is 64 bits on NetBSD 32 bits.
Use %jd and cast to (intmax_t) instead
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Switch NetBSD to QEMU_XEN.
All 3 versions of libxl__default_device_model() now return
LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN, so remove it and just set
b_info->device_model_version to LIBXL_DEVICE_MODEL_VERSION_QEMU_XEN in
libxl__domain_build_info_setdefault().
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Implement gnttab interface on NetBSD.
The kernel interface is different from FreeBSD so we can't use the FreeBSD
version
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Define PAGE_* if not already defined
Catch up with osdep interface change.
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
This patch adds ability to the device emulator to notify otherend
(some entity running in the guest) using a SPI and implements Arm
specific bits for it. Proposed interface allows emulator to set
the logical level of a one of a domain's IRQ lines.
We can't reuse the existing DM op (xen_dm_op_set_isa_irq_level)
to inject an interrupt as the "isa_irq" field is only 8-bit and
able to cover IRQ 0 - 255, whereas we need a wider range (0 - 1020).
Please note, for egde-triggered interrupt (which is used for
the virtio-mmio emulation) we only trigger the interrupt on Arm
if the level is asserted (rising edge) and do nothing if the level
is deasserted (falling edge), so the call could be named "trigger_irq"
(without the level parameter). But, in order to model the line closely
(to be able to support level-triggered interrupt) we need to know whether
the line is low or high, so the proposed interface has been chosen.
However, it is worth mentioning that in case of the level-triggered
interrupt, we should keep injecting the interrupt to the guest until
the line is deasserted (this is not covered by current patch).
Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Acked-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
[On Arm only]
Tested-by: Wei Chen <Wei.Chen@arm.com>
If Viridian extensions are enabled, Windows wouldn't currently allow
a hotplugged vCPU to be brought up dynamically. We need to expose a special
bit to let the guest know we allow it. Hide it behind an option to stay
on the safe side regarding compatibility with existing guests but
nevertheless set the option on by default.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
TLFS 7.8.1 stipulates that "a virtual processor index must be less than
the maximum number of virtual processors per partition" that "can be obtained
through CPUID leaf 0x40000005". Furthermore, "Requirements for Implementing
the Microsoft Hypervisor Interface" defines that starting from Windows Server
2012, which allowed more than 64 CPUs to be brought up, this leaf can now
contain a value -1 basically assuming the hypervisor has no restriction while
0 (that we currently expose) means the default restriction is still present.
Along with the previous changes exposing ExProcessorMasks this allows a recent
Windows VM with Viridian extension enabled to have more than 64 vCPUs without
going into BSOD in some cases.
Since we didn't expose the leaf before and to keep CPUID data consistent for
incoming streams from previous Xen versions - let's keep it behind an option.
Signed-off-by: Igor Druzhinin <igor.druzhinin@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Anthony PERARD <anthony.perard@citrix.com>
Keep the dummy handlers for restrict, map_resource and unmap_resource
for MiniOS, or else the build breaks with:
ld: /home/osstest/build.158759.build-amd64/xen/stubdom/mini-os-x86_64-xenstore/mini-os.o: in function `xenforeignmemory_restrict':
/home/osstest/build.158759.build-amd64/xen/stubdom/libs-x86_64/foreignmemory/core.c:137: undefined reference to `osdep_xenforeignmemory_restrict'
ld: /home/osstest/build.158759.build-amd64/xen/stubdom/mini-os-x86_64-xenstore/mini-os.o: in function `xenforeignmemory_map_resource':
/home/osstest/build.158759.build-amd64/xen/stubdom/libs-x86_64/foreignmemory/core.c:171: undefined reference to `osdep_xenforeignmemory_map_resource'
ld: /home/osstest/build.158759.build-amd64/xen/stubdom/mini-os-x86_64-xenstore/mini-os.o: in function `xenforeignmemory_unmap_resource':
/home/osstest/build.158759.build-amd64/xen/stubdom/libs-x86_64/foreignmemory/core.c:185: undefined reference to `osdep_xenforeignmemory_unmap_resource'
ld: /home/osstest/build.158759.build-amd64/xen/stubdom/mini-os-x86_64-xenstore/mini-os.o: in function `xenforeignmemory_resource_size':
/home/osstest/build.158759.build-amd64/xen/stubdom/libs-x86_64/foreignmemory/core.c:200: undefined reference to `osdep_xenforeignmemory_map_resource'
Fixes: 2b4b33ffe7 ('libs/foreignmemory: Implement on NetBSD')
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Use unsigned char variable, or cast to (unsigned char), for
tolower()/islower() and friends. Fix compiler error
array subscript has type 'char' [-Werror=char-subscripts]
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
With the Xen side of this interface (soon to be) fixed to return real sizes,
userspace needs to be able to make the query.
Introduce xenforeignmemory_resource_size() for the purpose, bumping the
library minor version.
Update both all osdep_xenforeignmemory_map_resource() implementations to
understand size requests, skip the mmap() operation, and copy back the
nr_frames field.
For NetBSD, also fix up the ioctl() error path to issue an unmap(), which was
overlooked by c/s 4a64e2bb39 "libs/foreignmemory: Implement on NetBSD".
Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Paul Durrant <paul@xen.org>
Acked-by: Wei Liu <wl@xen.org>
Implement foreignmemory interface on NetBSD. The compat interface is now used
only on __sun__
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
While only value computations of an object are disallowed in the
presence of another unsequenced side effect, at least gcc 4.3 looks to
extend this to taking the object's address. The resulting warning causes
the build to fail, because of -Werror.
While there also correct an adjacent comment.
Fixes: bdc0799fe2 ("libxlu: introduce xlu_pci_parse_spec_string()")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
While the lack of proper dependency tracking of #include-d files is
wider than just the libs/ subtree, dealing with the problem universally
there or in tools/Rules.mk is too much of a risk at this point in the
release cycle. Add the missing inclusion of $(DEPS_INCLUDE) only in the
specific Makefile-s, after having checked that their prior Makefile-s
had such includes.
Interestingly the $(DEPS_RM) use is present in tools/libs/libs.mk's
clean target, so doesn't need taking care of in individual Makefile-s.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-acked-by: Ian Jackson <iwj@xenproject.org>
Add a DOMPRINTF() other methods have, indicating success. To facilitate
this, introduce an "outsize" local variable and update *size as well as
*blob only once done. The latter then also avoids leaving a pointer to
freed memory in dom->kernel_blob in case of a decompression error.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
This follows the logic used for other decompression methods utilizing an
external library, albeit here we can't ignore the 32-bit size field
appended to the compressed image - its presence causes decompression to
fail. Leverage the field instead to allocate the output buffer in one
go, i.e. without incrementally realloc()ing.
As far as configure.ac goes, I'm pretty sure there is a better (more
"standard") way of using PKG_CHECK_MODULES(). The construct also gets
put next to the other decompression library checks, albeit I think they
all ought to be x86-specific (e.g. placed in the existing case block a
few lines down).
Note that, where possible, instead of #ifdef-ing xen/*.h inclusions,
they get removed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Wei Liu <wl@xen.org>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Abstract xc_dom_check_gzip()'s reading of the uncompressed size into a
helper re-usable, in particular, by other decompressor code.
Sadly in the mini-os case this conflicts with other functions of the
same name (and purpose), which can't be easily replaced individually.
Yet it was requested that no full set of helpers be introduced at this
point in the release cycle. Hence the awkward XG_NEED_UNALIGNED.
Requested-by: Ian Jackson <iwj@xenproject.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Release-Acked-by: Ian Jackson <ian.jackson@eu.citrix.com>
Occasionally, "dead" xentop processes consuming 100% CPU time have been
observed.
When the QEMU process the qmp_read() function is communicating with
terminates, qmp_read() may enter an infinite loop. poll() signals EOF (POLLIN
and POLLHUP set), the subsequent read() call returns 0, and then the function
calls poll() again, which still sees the EOF condition and will return again
immediately with POLLIN and POLLHUP set, repeating ad infinitum.
A simple fix is to terminate the loop when read returns 0 (under "normal"
instances, poll will return with POLLIN set only if there is data to read, so
read will always read >0 bytes, except if the socket has been closed).
Signed-off-by: Hans Reiser <hr@sec.uni-passau.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
This patch modifies libxlu_pci_parse_spec_string() to parse the new 'name'
parameter of PCI_SPEC_STRING detailed in the updated documention in
xl-pci-configuration(5) and populate the 'name' field of 'libxl_device_pci'.
If the 'name' field is non-NULL then both libxl_device_pci_add() and
libxl_device_pci_remove() will use it to look up the device BDF in
the list of assignable devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
... and modify libxl_pci_bdf_assignable_add/remove/list() to make use of it.
libxl_pci_bdf_assignable_add() will store the name of the device in xenstore
if the field is specified (i.e. non-NULL) and libxl_pci_bdf_assignable_remove()
will remove devices specified only by name, looking up the BDF as necessary.
libxl_pci_bdf_assignable_list() will also populate the 'name' field if a name
was stored by libxl_pci_bdf_assignable_add().
NOTE: This patch also fixes whitespace in the declaration of 'libxl_device_pci'
in the IDL.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
There are only two call-sites. One always sets it to 0 (which is unnecessary
as the structure is already initialized to zero) and the other can simply set
the 'vdevfn' field directly (after proper structure initialization), avoiding
the need for a local variable.
A subsequent patch will also make use of pci_struct_fill() in a context
where 'vdevfn' may already have been set.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
This patch largely re-writes the code to parse a PCI_SPEC_STRING and enters
it via the newly introduced function. The new parser also deals with 'bdf'
and 'vslot' as non-positional paramaters, as per the documentation in
xl-pci-configuration(5).
The existing xlu_pci_parse_bdf() function remains, but now strictly parses
BDF values. Some existing callers of xlu_pci_parse_bdf() are
modified to call xlu_pci_parse_spec_string() as per the documentation in xl(1).
NOTE: Usage text in xl_cmdtable.c and error messages are also modified
appropriately.
As a side-effect this patch also fixes a bug where using '*' to specify
all functions would lead to an assertion failure at the end of
xlu_pci_parse_bdf().
Fixes: d25cc3ec93 ("libxl: workaround gcc 10.2 maybe-uninitialized warning")
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
remove PROCNETDEV_HEADER[] and read_attributes_vbd(), gcc complains that they
are unused
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Use xenio3.h for ioctl definitions
read_exact/write_exact seems to not be available here, which cause a gcc
error. Use plain read/write, the xenevtchn interface won't do partial
read/write on NetBSD anyway so it should be safe. This is in line with the
rest of the OS specific helpers.
Fixes: b7f76a699d ('tools: Refactor /dev/xen/evtchn wrappers into libxenevtchn')
Signed-off-by: Manuel Bouyer <bouyer@netbsd.org>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Reading a gzipped string value from hypfs doesn't add a 0 byte at the
end. Fix that.
Fixes: 86234eafb9 ("libs: add libxenhypfs")
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Today the file descriptor for the access of the event channel driver
is being closed in case of exec(2). For the support of live update of
a daemon using libxenevtchn this can be problematic, so add a way to
keep that file descriptor open.
Add support of a flag XENEVTCHN_NO_CLOEXEC for xenevtchn_open() which
will result in _not_ setting O_CLOEXEC when opening the event channel
driver node.
The caller can then obtain the file descriptor via xenevtchn_fd().
Add an alternative open function xenevtchn_fdopen() which takes that
file descriptor as an additional parameter. This allows to allocate a
xenevtchn_handle and to associate it with that file descriptor.
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Wei Liu <wl@xen.org>
Reviewed-by: Julien Grall <jgrall@amazon.com>
Propagate the flags parameter of xenevtchn_open() to the OS-specific
handlers in order to enable handling them there.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Refuse a call of xenevtchn_open() with unsupported bits in flags being
set.
This will change behavior for callers passing junk in flags today,
but those would otherwise get probably unwanted side effects when the
flags they specify today get any meaning. So checking flags is the
right thing to do.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Rename the xenevtchn_open() parameter open_flags to flags as it might
be used for things not passed on to open().
No functional change.
No API/ABI changes.
Suggested-by: Andrew Cooper <andrew.cooper3@citrix.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
There is a mixture of different styles in libxenevtchn. Use the
standard xen style only.
No functional change.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
Its guard was updated such that it is visible by default when POSIX 2008
was adopted by glibc. It's not visible by default on older glibc.
Fixes: 40fe714ca4 ("tools/libs/stat: use memcpy instead of strncpy in getBridge")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Ian Jackson <ian.jackson@eu.citrix.com>
Just code movement as a preparatory change before xg_sr_* will be moved.
Signed-off-by: Olaf Hering <olaf@aepfle.de>
Acked-by: Andrew Cooper <andrew.cooper3@citrix.com>
When device is removed, backend domain (which may be a driver domain) is
responsible for removing backend entries from xenstore. But in case of
driver domain, it has no access to remove all of them - specifically the
directory named after frontend-id remains. This may accumulate enough to
exceed xenstore quote of the driver domain, breaking further devices.
Fix this by calling libxl__xs_path_cleanup() on the backend path from
libxl__device_destroy() in the toolstack domain too. Note
libxl__device_destroy() is called when the driver domain already removed
what it can (see device_destroy_be_watch_cb()->device_hotplug_done()).
Signed-off-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Acked-by: Wei Liu <wl@xen.org>
The FreeBSD ioctls have the same fields has the Linux ones, so the
same file can be shared between both OSes.
No functional change for OSes different than FreeBSD.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
Implement restrict, map resource and unmap resource helpers on
FreeBSD.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Acked-by: Wei Liu <wl@xen.org>
This patch reverts eight patches from staging.
The offending patch is the one that introduced libxl_pci_bdf (last one
in the list). The rest depend on that patch so they are also reverted.
8bf0fab142 "libxl / libxlu: support 'xl pci-attach/detach' by name"
e1141654c3 "docs/man: modify xl-pci-configuration(5) to add 'name' field to PCI_SPEC_STRING"
93c16ae47b "xl: support naming of assignable devices"
5ab684cb3e "libxl: introduce libxl_pci_bdf_assignable_add/remove/list/list_free(), ..."
66c2fbc6e8 "libxl: convert internal functions in libxl_pci.c..."
f73c5dd56d "docs/man: modify xl(1) in preparation for naming of assignable devices"
96ed6ff297 "libxlu: introduce xlu_pci_parse_spec_string()"
929f231140 "libxl: introduce 'libxl_pci_bdf' in the idl..."
Signed-off-by: Wei Liu <wl@xen.org>
This patch adds a 'name' field into the idl for 'libxl_device_pci' and
libxlu_pci_parse_spec_string() is modified to parse the new 'name'
parameter of PCI_SPEC_STRING detailed in the updated documention in
xl-pci-configuration(5).
If the 'name' field is non-NULL then both libxl_device_pci_add() and
libxl_device_pci_remove() will use it to look up the device BDF in
the list of assignable devices.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
which support naming and use 'libxl_pci_bdf' rather than 'libxl_device_pci',
as replacements for libxl_device_pci_assignable_add/remove/list/list_free().
libxl_pci_bdf_assignable_add() takes a 'name' parameter which is stored in
xenstore and facilitates two addtional functions added by this patch:
libxl_pci_bdf_assignable_name2bdf() and libxl_pci_bdf_assignable_bdf2name().
Currently there are no callers of these two functions. They will be added in
a subsequent patch.
libxl_device_pci_assignable_add/remove/list/list_free() are left in place
for compatibility but are re-implemented in terms of the newly introduced
functions.
Signed-off-by: Paul Durrant <pdurrant@amazon.com>
Acked-by: Wei Liu <wl@xen.org>
Michał Leszczyński
Andrew Cooper
Manuel Bouyer
Oleksandr Tyshchenko
Igor Druzhinin
Roger Pau Monné
Jan Beulich
Hans Reiser
Paul Durrant
Juergen Gross
Olaf Hering
Marek Marczykowski-Górecki
Wei Liu